{"title":"Bently Nevada Proximity Probe Housing Assemblies","description":"\u003cp\u003eBently Nevada Proximity Probe Housing Assemblies provide a robust mechanical interface and environmental protection for sensors mounted on the exterior of machinery. The architecture includes a weather-tight enclosure, a probe sleeve, and a conduit connection point, typically manufactured from corrosion-resistant aluminum or stainless steel. Technical characteristics include NEMA 4X or IP66 ratings, allowing for the secure installation of \u003ca href=\"https:\/\/www.plcprotech.com\/collections\/bently-nevada-3300-xl-proximity-probe\"\u003e3300 XL proximity probes\u003c\/a\u003e in outdoor or high-moisture areas. Functionally, these assemblies allow for \"hot-swapping\" or adjusting probes without dismantling the machine casing, as the probe gap can be set externally. This architecture is essential for large steam turbines and fans, ensuring that the critical \u003ca href=\"https:\/\/www.plcprotech.com\/collections\/bently-nevada-3300-xl-nsv-system\"\u003eproximity system\u003c\/a\u003e components remain shielded from physical damage and extreme environmental conditions.\u003c\/p\u003e","products":[{"product_id":"bently-nevada-21000-28-05-00-060-03-02-proximity-probe-housing-assembly","title":"Bently Nevada 21000-28-05-00-060-03-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\n\u003cstrong\u003e21000-28-05-00-060-03-02\u003c\/strong\u003e: 3300 XL 8 mm proximity probe housing assembly, configured with 0.5 meter cable length (Option 05), no standoff adapter (Option 00), 6.0 inch probe penetration (Option 060), cable seal grip fitting (Option 03), and 3\/4-14 NPT mounting thread (Option 02). This assembly utilizes a 3300 XL 8 mm probe with selectable hazardous area approvals (Option 28) for shaft vibration and position measurement.\n\nThe 21000 series is an aluminum body housing with a 304 stainless steel sleeve, designed for industrial machinery protection. This specific variant includes a cable seal grip with grommets to accommodate multiple cable sizes, providing robust environmental protection for the probe and cable interface. The assembly meets API 670 standards for externally mounted proximity probe housings.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProbe type: 3300 XL 8 mm probe with selectable hazardous area approvals (Option 28)\u003c\/li\u003e\n\u003cli\u003eCable length: 0.5 meter (Option 05)\u003c\/li\u003e\n\u003cli\u003eStandoff adapter: None selected (Option 00)\u003c\/li\u003e\n\u003cli\u003eProbe penetration: 6.0 inches (Option 060)\u003c\/li\u003e\n\u003cli\u003eFittings: One cable seal grip with grommets for cable sizes 1\/8 to 3\/8 inches (Option 03)\u003c\/li\u003e\n\u003cli\u003eMounting thread: 3\/4-14 NPT (Option 02)\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminum body with 304 stainless steel sleeve\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy industrial rotating machinery protection (turbines, compressors, pumps, motors)\u003c\/li\u003e\n\u003cli\u003eShaft vibration and axial position measurement\u003c\/li\u003e\n\u003cli\u003eExternal proximity probe mounting compliant with API 670 standards\u003c\/li\u003e\n\u003cli\u003eHazardous area environments (when used with compatible system components)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003cth\u003eOption\u003c\/th\u003e\n    \u003cth\u003eCode on This SKU\u003c\/th\u003e\n    \u003cth\u003eDescription\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n    \u003ctd\u003e21000-28-05-00-060-03-02\u003c\/td\u003e\n    \u003ctd\u003e21000 Proximity Probe Housing Assembly\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eA - Probe Type\u003c\/td\u003e\n    \u003ctd\u003e28\u003c\/td\u003e\n    \u003ctd\u003e3300 XL 8 mm probe, selectable hazardous area approvals\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eB - Cable Length\u003c\/td\u003e\n    \u003ctd\u003e05\u003c\/td\u003e\n    \u003ctd\u003e0.5 meter (20 in)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n    \u003ctd\u003e00\u003c\/td\u003e\n    \u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n    \u003ctd\u003e060\u003c\/td\u003e\n    \u003ctd\u003e6.0 in (152.4 mm)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eE - Fittings\u003c\/td\u003e\n    \u003ctd\u003e03\u003c\/td\u003e\n    \u003ctd\u003eOne cable seal grip with grommets\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n    \u003ctd\u003e02\u003c\/td\u003e\n    \u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003cth\u003eParameter\u003c\/th\u003e\n    \u003cth\u003eSpecification\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eManufacturer\u003c\/td\u003e\n    \u003ctd\u003eBently Nevada\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eModel\u003c\/td\u003e\n    \u003ctd\u003e21000\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eBody Material\u003c\/td\u003e\n    \u003ctd\u003eAluminum\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eSleeve Material\u003c\/td\u003e\n    \u003ctd\u003e304 Stainless Steel\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eTypical Weight\u003c\/td\u003e\n    \u003ctd\u003e1.1 kg (2.4 lb)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n    \u003ctd\u003e-51 degC to +177 degC (-60 degF to +351 degF)\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the probe lead is longer than the sleeve length. For probe penetration lengths greater than 300 mm (12 inches), install additional sleeve support to minimize vibration. If using probe penetration lengths between 1.0 inch and 2.0 inches, counter boring the machine case may be necessary to reduce probe side view or rear view effects.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666526826859,"sku":"21000-28-05-00-060-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-28-05-00-060-03-02-proximity-probehousing-assemblies-nd1jtolohcz_82063272-6c5c-4d46-b259-baa8e28b30a9.jpg?v=1765440289"},{"product_id":"bently-nevada-31000-28-10-00-015-03-02-english-proximity-probe-housing-assemblies","title":"Bently Nevada 31000-28-10-00-015-03-02 English Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nThe \u003cstrong\u003e31000-28-10-00-015-03-02\u003c\/strong\u003e is an \u003cstrong\u003eEnglish Proximity Probe Housing Assembly\u003c\/strong\u003e designed for secure, external mounting of proximity probes in rotating machinery. This specific configuration features a 3300 XL 8 mm probe (Option 28) with multiple approvals and a 1.0 m probe cable length (Option 10). The housing allows for external access to the probe and its extension cable, enabling efficient gap adjustment or replacement without requiring the disassembly of the machine case.\n\nConstructed from polyphenylene sulfide (PPS), this housing assembly offers excellent corrosion resistance and mechanical protection, complying with the American Petroleum Institute (API) 670 standard for externally mounted proximity probe housings. The \u003cstrong\u003e31000\u003c\/strong\u003e series is utilized primarily for radial vibration and Keyphasor measurements, ensuring stable and reliable sensor operation in demanding industrial environments.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing Material: Polyphenylene sulfide (PPS) for high-strength, corrosion-resistant operation\u003c\/li\u003e\n\u003cli\u003eOption 28: Integrated 3300 XL 8 mm proximity probe with multiple hazardous area approvals\u003c\/li\u003e\n\u003cli\u003eOption 10: 1.0 m probe cable length for standard reach requirements\u003c\/li\u003e\n\u003cli\u003eOption 03: Fittings configuration including two plugs and one M20 fitting\u003c\/li\u003e\n\u003cli\u003eOption 02: 3\/4-14 NPT mounting thread for secure installation into the machine case\u003c\/li\u003e\n\u003cli\u003eExternal Access: Enables gap adjustment and probe maintenance without machine disassembly\u003c\/li\u003e\n\u003cli\u003eCompliance: API 670 standard compliant for externally mounted probe housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration monitoring\u003c\/li\u003e\n\u003cli\u003eKeyphasor measurements for speed and phase reference\u003c\/li\u003e\n\u003cli\u003eAxial position measurement (when used with appropriate housing setups)\u003c\/li\u003e\n\u003cli\u003eRotating machinery protection in oil and gas, petrochemical, and power generation facilities\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-10-00-015-03-02\u003c\/td\u003e\n\u003ctd\u003e31000 English Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, multiple approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in) cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e015\u003c\/td\u003e\n\u003ctd\u003eProbe penetration dimension (1.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eTwo plugs, one M20 fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT mounting thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-10-00-015-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eMultiple approvals (per Option 28)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Type\u003c\/td\u003e\n\u003ctd\u003eTwo plugs, one M20 fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the outer sleeve into the machine case before attaching the housing.\u003c\/li\u003e\n\u003cli\u003eAdjust the probe gap externally through the housing access cover.\u003c\/li\u003e\n\u003cli\u003eEnsure all unused conduit holes are sealed with the provided plugs to maintain environmental protection.\u003c\/li\u003e\n\u003cli\u003eTighten housing cover captive screws securely after maintenance.\u003c\/li\u003e\n\u003cli\u003eFollow standard 3300 XL system installation procedures for probe gap calibration and signal validation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666527449451,"sku":"31000-28-10-00-015-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-10-00-015-03-02-proximity-probe-housing-hkiy220ydhg_ccd48dce-c3d6-4289-8c8f-d21e3ac20115.jpg?v=1765440298"},{"product_id":"bently-nevada-24701-28-10-35-027-03-02-proximity-probe-housing-assemblies","title":"Bently Nevada 24701-28-10-35-027-03-02 Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e24701-28-10-35-027-03-02\u003c\/strong\u003e is a \u003cstrong\u003e24701 series proximity probe housing assembly\u003c\/strong\u003e featuring a 3300 XL 8 mm probe with selectable hazardous area approvals (Option 28). This configuration includes a 1.0 m (39 in) probe cable length (Option 10), a 3.5 inch standoff adapter (Option 35), and a 2.7 inch probe penetration depth (Option 027).\u003c\/p\u003e\n\n\u003cp\u003eThis housing assembly is engineered for robust industrial vibration monitoring, providing environmental protection for the probe and cable within the machinery interface. The assembly utilizes 3\/4-14 NPT mounting threads (Option 02) and includes a reducer and cable seal grip (Option 03) to ensure integrity in challenging process environments. The 3300 XL 8 mm probe interface is designed for compatibility with standard Bently Nevada 3300 XL monitoring systems, facilitating accurate shaft vibration and position measurement.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOption 28: 3300 XL 8 mm proximity probe with selectable hazardous area approvals\u003c\/li\u003e\n\u003cli\u003eOption 10: 1.0 m (39 in) probe cable length\u003c\/li\u003e\n\u003cli\u003eOption 35: 3.5 in standoff adapter length\u003c\/li\u003e\n\u003cli\u003eOption 027: 2.7 in probe penetration depth\u003c\/li\u003e\n\u003cli\u003eOption 03: Fittings including 3\/4-14 NPT to 1\/2-14 NPT reducer and cable seal grip\u003c\/li\u003e\n\u003cli\u003eOption 02: 3\/4-14 NPT mounting thread\u003c\/li\u003e\n\u003cli\u003eDesigned for compatibility with API 670 standards for externally mounted proximity probe housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSteam and gas turbine vibration monitoring\u003c\/li\u003e\n\u003cli\u003eCompressor and pump shaft position measurements\u003c\/li\u003e\n\u003cli\u003eHydroelectric generator monitoring\u003c\/li\u003e\n\u003cli\u003eHazardous area machinery protection environments\u003c\/li\u003e\n\u003cli\u003eFluid film bearing diagnostics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e24701-28-10-35-027-03-02\u003c\/td\u003e\n\u003ctd\u003e24701 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, selectable hazardous area approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e3.5 in (89 mm) length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e027\u003c\/td\u003e\n\u003ctd\u003e2.7 in (69 mm) penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT to 1\/2-14 NPT reducer, one cable seal grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e24701\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandoff Adapter\u003c\/td\u003e\n\u003ctd\u003e3.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePenetration Depth\u003c\/td\u003e\n\u003ctd\u003e2.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the probe penetration depth is adjusted correctly relative to the machine case to avoid side view or rear view effects. For probe penetration lengths greater than 300 mm (12 inches), install additional sleeve support to prevent resonance. Use the provided cable seal grips to maintain environmental sealing integrity. Ensure all hazardous area installation practices are followed in accordance with the approval options selected.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eThis assembly is designed for compatibility with API 670 standards. Hazardous area approval compliance is dependent on the selected option codes and the specific certification documentation provided with the product.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666529841515,"sku":"24701-28-10-35-027-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-24701-28-10-35-027-03-02-industrial-proximity-sensor-housing-pmpvwfsiese_20c72774-84f4-4e86-b18f-a178e4c0440f.jpg?v=1765440342"},{"product_id":"bently-nevada-21000-28-05-00-080-03-02-proximity-probe-housing-assemblies","title":"Bently Nevada 21000-28-05-00-080-03-02 Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e21000-28-05-00-080-03-02\u003c\/strong\u003e is a Bently Nevada proximity probe housing assembly, specifically configured with a \u003cstrong\u003e3300 XL 8 mm probe\u003c\/strong\u003e (Option 28) and a \u003cstrong\u003e0.5 m (20 in) probe cable\u003c\/strong\u003e (Option 05). This assembly is designed to provide a secure and weather-tight environment for proximity probes, ensuring reliable performance in demanding industrial vibration and position monitoring applications. The housing is constructed with an aluminum body and a stainless steel sleeve, meeting API 670 standards for externally mounted proximity probe housings.\u003c\/p\u003e\n\n\u003cp\u003eThis specific configuration (Option 00) excludes a standoff adapter, providing a direct installation profile. The 8.0 in probe penetration depth (Option 080) and 3\/4-14 NPT mounting thread (Option 02) facilitate precise integration into machine cases. The inclusion of a cable seal grip (Option 03) ensures protection against environmental contaminants. This unit is compatible with 3300 XL transducer systems, offering standard hazardous area approval capabilities aligned with the 3300 XL 8 mm probe series.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe (Option 28):\u003c\/strong\u003e Includes 3300 XL 8 mm proximity probe with selectable hazardous area approvals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length (Option 05):\u003c\/strong\u003e Integrated 0.5 meter (20 inch) probe cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandoff Adapter (Option 00):\u003c\/strong\u003e No standoff adapter included; direct mounting configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Penetration (Option 080):\u003c\/strong\u003e Configured for an 8.0 inch (203.2 mm) penetration depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings (Option 03):\u003c\/strong\u003e Equipped with one cable seal grip containing grommets for multiple cable size ranges (1\/8 to 3\/8 inches).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Thread (Option 02):\u003c\/strong\u003e 3\/4-14 NPT mounting thread for standard industrial connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Aluminum body with 304 stainless steel sleeve for durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower generation machinery\u003c\/li\u003e\n\u003cli\u003eOil and gas petrochemical processing\u003c\/li\u003e\n\u003cli\u003eWater treatment and pumping stations\u003c\/li\u003e\n\u003cli\u003eIndustrial rotating machinery protection\u003c\/li\u003e\n\u003cli\u003eAxial position and shaft vibration monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e21000-28-05-00-080-03-02\u003c\/td\u003e\n\u003ctd\u003e21000 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, selectable hazardous area approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e080\u003c\/td\u003e\n\u003ctd\u003e8.0 in (203.2 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eOne cable seal grip with grommets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e21000-28-05-00-080-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Material\u003c\/td\u003e\n\u003ctd\u003eAluminum with 304 stainless steel sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.1 kg (2.4 lb) typical (without fittings)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the probe cable length is sufficient for the sleeve length; the probe lead must be longer than the sleeve.\u003c\/li\u003e\n\u003cli\u003eFor penetration lengths greater than 300 mm (12 in), additional sleeve support is required to prevent resonance.\u003c\/li\u003e\n\u003cli\u003eUtilize the provided cable seal grip to prevent moisture ingress at the conduit entry.\u003c\/li\u003e\n\u003cli\u003eWhen installing in hazardous areas, ensure the selected approvals meet local regulatory requirements and the system is installed per control drawing 140979.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRoHS Directive 2011\/65\/EU\u003c\/li\u003e\n\u003cli\u003eCSA certified for explosion-proof applications (when ordered with appropriate housing and fittings)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666530300267,"sku":"21000-28-05-00-080-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-28-05-00-080-03-02-probe-housing-assembly-iwxdc00ltmp_2d06f6d1-54c9-4b1b-94fe-8fb76ccc8812.jpg?v=1765440347"},{"product_id":"bently-nevada-21000-16-05-00-084-04-02-proximity-probe-housing-assembly","title":"Bently Nevada 21000-16-05-00-084-04-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e21000-16-05-00-084-04-02\u003c\/strong\u003e is an aluminum Proximity Probe Housing Assembly designed for external mounting of eddy-current proximity probes. This configuration includes a 3300 XL 8 mm probe (Option 16), a 0.5 meter (20 in) probe cable (Option 05), and an 8.4 inch (213 mm) probe penetration length (Option 084). It features a 3\/4-14 NPT mounting thread (Option 02) and is configured with a 3\/4-14 NPT plug fitting (Option 04) for conduit sealing.\u003c\/p\u003e\n\n\u003cp\u003eThis assembly provides a protective enclosure for probes in industrial machinery environments, ensuring compliance with API 670 standards for externally mounted proximity probe housings. The unit consists of an aluminum housing body, a probe sleeve of the specified penetration length, internal O-rings, and required fittings. It is engineered for applications where secure, robust probe mounting and environmental protection are required for vibration and axial position measurement systems.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing Material: Aluminum body with 304 stainless steel sleeve\u003c\/li\u003e\n\u003cli\u003eProbe Type: 3300 XL 8 mm proximity probe\u003c\/li\u003e\n\u003cli\u003eCable Length: 0.5 m (20 in)\u003c\/li\u003e\n\u003cli\u003eProbe Penetration Length: 8.4 in (213 mm)\u003c\/li\u003e\n\u003cli\u003eFittings: One 3\/4-14 NPT plug\u003c\/li\u003e\n\u003cli\u003eMounting Thread: 3\/4-14 NPT\u003c\/li\u003e\n\u003cli\u003eCompliance: API 670 standard for externally mounted proximity probe housings\u003c\/li\u003e\n\u003cli\u003eCertifications: CSA explosion-proof rated for hazardous area applications (when ordered with appropriate configurations)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower generation machinery\u003c\/li\u003e\n\u003cli\u003eOil and gas rotating equipment\u003c\/li\u003e\n\u003cli\u003ePetrochemical and refinery monitoring systems\u003c\/li\u003e\n\u003cli\u003eWater and industrial pumping systems\u003c\/li\u003e\n\u003cli\u003eTurbines, compressors, and pumps requiring external probe mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e21000-16-05-00-084-04-02\u003c\/td\u003e\n\u003ctd\u003e21000 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e084\u003c\/td\u003e\n\u003ctd\u003e8.4 in (213 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e04\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e21000-16-05-00-084-04-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Material\u003c\/td\u003e\n\u003ctd\u003eAluminum with 304 stainless steel sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (Typical)\u003c\/td\u003e\n\u003ctd\u003e1.1 kg (2.4 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC (-60 degF to +351 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approvals\u003c\/td\u003e\n\u003ctd\u003eCSA Class I, Div 1 \u0026amp; 2, Groups C \u0026amp; D; Class II, Div 1 \u0026amp; 2, Groups E, F, \u0026amp; G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure that probe sleeve lengths are matched to the specific installation depth requirement. For sleeve lengths exceeding 304 mm (12 inches), install additional sleeve support to mitigate resonance and vibration effects. Verify that the housing and probe are installed in accordance with local hazardous area regulations and Bently Nevada user guides for the 3300 XL transducer system.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCSA Certified (Explosion-proof applications)\u003c\/li\u003e\n\u003cli\u003eAPI 670 Compliant\u003c\/li\u003e\n\u003cli\u003eRoHS Directive 2011\/65\/EU Compliant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666532692331,"sku":"21000-16-05-00-084-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-16-05-00-084-04-02-aluminum-probe-housing-assembly-savwtsharqt_e98bd336-14d1-4030-8e30-6a6f4efe6a77.jpg?v=1765440378"},{"product_id":"bently-nevada-31000-28-05-15-030-00-02-english-proximity-probe-housing-assemblies","title":"Bently Nevada 31000-28-05-15-030-00-02 English Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nThe \u003cstrong\u003e31000-28-05-15-030-00-02\u003c\/strong\u003e is an English proximity probe housing assembly designed for the 3300 XL 8 mm proximity transducer system, featuring multiple agency approvals (Option 28). This assembly allows for external access to the probe and its extension cable, enabling critical maintenance tasks such as gap adjustment or probe replacement without the need to disassemble the machine casing. It is primarily used for monitoring radial vibration and Keyphasor signals on rotating machinery.\n\nThis housing is constructed from polyphenylene sulfide (PPS), a high-strength thermoplastic offering excellent corrosion resistance, complemented by corrosion-resistant stainless steel components. The assembly is fully compliant with API 670 standards for externally mounted proximity probe housings. This specific configuration includes a 0.5 m probe cable (Option 05) and is configured with 3\/4-14 NPT mounting threads (Option 02) for secure installation. It is supplied without fittings (Option 00), utilizing two plugs and two washers for sealing unused ports.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed from polyphenylene sulfide (PPS) and stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eAPI 670 compliant design for reliable machinery protection\u003c\/li\u003e\n\u003cli\u003eEnables external access for probe gap adjustment and replacement\u003c\/li\u003e\n\u003cli\u003eCompatible with 3300 XL 8 mm probes with multiple agency approvals\u003c\/li\u003e\n\u003cli\u003eIncludes 0.5 m probe cable and 3\/4-14 NPT mounting threads\u003c\/li\u003e\n\u003cli\u003eSuitable for integration in intrinsically safe hazardous area applications when paired with appropriate I.S. barriers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration measurement on rotating machinery\u003c\/li\u003e\n\u003cli\u003eKeyphasor measurements\u003c\/li\u003e\n\u003cli\u003eHazardous area monitoring (when installed with approved transducer systems)\u003c\/li\u003e\n\u003cli\u003eOil and gas, power generation, and petrochemical processing equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-05-15-030-00-02\u003c\/td\u003e\n\u003ctd\u003e31000 English Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, multiple approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003eStandoff Adapter Length (Standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e030\u003c\/td\u003e\n\u003ctd\u003eProbe Penetration Option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eWithout fittings; two plugs and two washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e31000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene Sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware Material\u003c\/td\u003e\n\u003ctd\u003eCorrosion-resistant stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the outer sleeve into the machine case before attaching the housing assembly.\u003c\/li\u003e\n\u003cli\u003eEnsure the machine casing is affixed to the bearing when monitoring radial vibration to maintain signal accuracy.\u003c\/li\u003e\n\u003cli\u003eTighten hole plug nuts to 0.5 N-m (5 in-lbs) if unused ports are sealed.\u003c\/li\u003e\n\u003cli\u003eUse appropriate I.S. barriers when installing in hazardous area applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAPI 670 Compliant\u003c\/li\u003e\n\u003cli\u003eMultiple agency approvals for 3300 XL 8 mm probe system (as specified by Option 28)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666536788331,"sku":"31000-28-05-15-030-00-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-05-15-030-00-02-housingassemblies-we3rpnyplzj_d09747fc-59de-4b71-bc62-0b95987b05cc.jpg?v=1765440424"},{"product_id":"bently-nevada-31000-28-05-20-110-00-02-english-proximity-probe-housing-assembly","title":"Bently Nevada 31000-28-05-20-110-00-02 English Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e31000-28-05-20-110-00-02\u003c\/strong\u003e is an \u003cstrong\u003eEnglish Proximity Probe Housing Assembly\u003c\/strong\u003e designed for secure, external mounting of proximity transducers through machine cases. This specific configuration features a 3300 XL 8 mm probe with a connector protector (Option 28), a 0.5 m (20 in) probe cable (Option 05), a 200 mm standoff adapter (Option 20), and 110 mm of probe penetration (Option 110). It is supplied without conduit fittings (Option 00) and utilizes a 3\/4-14 NPT mounting thread (Option 02).\u003c\/p\u003e\n\n\u003cp\u003eThe 31000 series housing is constructed from polyphenylene sulfide (PPS), a high-strength thermoplastic offering excellent corrosion resistance, complemented by corrosion-resistant stainless steel components. This assembly is fully compliant with API 670 standards for externally mounted proximity probe housings. It provides critical mechanical and environmental protection for transducer systems, allowing for external access to the probe and extension cable. This design permits essential maintenance tasks, such as probe gap adjustment or replacement, without the need to disassemble the machine.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 28:\u003c\/strong\u003e Pre-installed 3300 XL 8 mm proximity probe with connector protector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 05:\u003c\/strong\u003e Integrated 0.5 m (20 in) probe cable for connection within the housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 20:\u003c\/strong\u003e Standoff adapter length of 200 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 110:\u003c\/strong\u003e Probe penetration depth of 110 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 00:\u003c\/strong\u003e Housing supplied with two plugs and two washers, no conduit fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 02:\u003c\/strong\u003e Standard 3\/4-14 NPT mounting thread for secure machine case attachment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAPI 670 Compliant:\u003c\/strong\u003e Engineered for reliability and standardized performance in rotating machinery applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadially mounted transducers for vibration monitoring.\u003c\/li\u003e\n\u003cli\u003eKeyphasor measurements.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty rotating machinery in petrochemical, power generation, and oil and gas facilities.\u003c\/li\u003e\n\u003cli\u003eApplications where external access for probe gap adjustment or sensor replacement is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-05-20-110-00-02\u003c\/td\u003e\n\u003ctd\u003eEnglish Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, with connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e200 mm (Maximum length)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003ctd\u003e110 mm probe penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eWithout fittings; two plugs and two washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-05-20-110-00-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS) \/ Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard Compliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the machine casing is affixed to the bearing to obtain accurate relative vibration readings. When installing, fit the outer sleeve into the machine case, then insert the probe sleeve to adjust the required gap. Tighten the retaining nut to secure the assembly. If using hole plugs, tighten the plug nuts to 0.5 N-m (5 in-lbs) to maintain the environmental seal. Consult the user guide for detailed mounting and torque specifications.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eCompliant with API 670 Standards. Compatible with intrinsically safe transducer systems when installed with appropriate I.S. barriers.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666539704683,"sku":"31000-28-05-20-110-00-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-05-20-110-00-02-housingassemblies-icrodxlvm0i_9b500494-968e-48ba-a772-fc4e6b6f1c2d.jpg?v=1765440454"},{"product_id":"bently-nevada-21000-00-00-00-250-03-02-proximity-probe-housing-assemblies","title":"Bently Nevada 21000-00-00-00-250-03-02 Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e21000-00-00-00-250-03-02\u003c\/strong\u003e is a robust proximity probe housing assembly designed for industrial machinery vibration monitoring applications. This specific configuration features a 25.0 inch probe penetration depth (Option 250) and is equipped with a cable seal grip fitting (Option 03) and 3\/4-14 NPT mounting threads (Option 02). As a standard 21000 series housing, it utilizes an aluminum body with a stainless steel sleeve to protect internally mounted proximity probes from harsh environmental conditions.\u003c\/p\u003e\n\n\u003cp\u003eThis assembly configuration does not include a pre-installed probe or cable (Options 00 for A and B) and is provided without a standoff adapter (Option 00 for C). It is compatible with 3300 XL and 3300 NSv proximity transducer systems, providing the necessary mechanical protection for probes in demanding process environments such as power generation, oil and gas, and petrochemical facilities. The 21000 series ensures compliance with industry standards for externally mounted proximity probe housings.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eAluminum body construction with 304 stainless steel sleeve\u003c\/li\u003e\n    \u003cli\u003eProbe penetration: 25.0 inches (Option 250)\u003c\/li\u003e\n    \u003cli\u003eMounting thread: 3\/4-14 NPT (Option 02)\u003c\/li\u003e\n    \u003cli\u003eFittings: Includes one cable seal grip with grommets (Option 03)\u003c\/li\u003e\n    \u003cli\u003eDesigned for 3300 XL 8mm, 11mm, and NSv proximity probes\u003c\/li\u003e\n    \u003cli\u003eMeets API 670 standards for externally mounted proximity probe housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eRotating machinery vibration and position monitoring\u003c\/li\u003e\n    \u003cli\u003eOil and gas compressor\/turbine protection\u003c\/li\u003e\n    \u003cli\u003ePower generation equipment monitoring\u003c\/li\u003e\n    \u003cli\u003eHarsh industrial environments requiring probe protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n    \u003ctr\u003e\n        \u003cth\u003eOption\u003c\/th\u003e\n        \u003cth\u003eCode on This SKU\u003c\/th\u003e\n        \u003cth\u003eDescription\u003c\/th\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n        \u003ctd\u003e21000-00-00-00-250-03-02\u003c\/td\u003e\n        \u003ctd\u003eProximity Probe Housing Assembly\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eA - Probe\u003c\/td\u003e\n        \u003ctd\u003e00\u003c\/td\u003e\n        \u003ctd\u003eProbe not required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eB - Cable Length\u003c\/td\u003e\n        \u003ctd\u003e00\u003c\/td\u003e\n        \u003ctd\u003eProbe cable not required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n        \u003ctd\u003e00\u003c\/td\u003e\n        \u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n        \u003ctd\u003e250\u003c\/td\u003e\n        \u003ctd\u003e25.0 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eE - Fittings\u003c\/td\u003e\n        \u003ctd\u003e03\u003c\/td\u003e\n        \u003ctd\u003eOne cable seal grip with grommets\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n        \u003ctd\u003e02\u003c\/td\u003e\n        \u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eManufacturer\u003c\/td\u003e\n        \u003ctd\u003eBently Nevada\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003ePart Number\u003c\/td\u003e\n        \u003ctd\u003e21000-00-00-00-250-03-02\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eBody Material\u003c\/td\u003e\n        \u003ctd\u003eAluminum with 304 stainless steel sleeve\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eWeight\u003c\/td\u003e\n        \u003ctd\u003e1.1 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eMounting Thread\u003c\/td\u003e\n        \u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eFittings\u003c\/td\u003e\n        \u003ctd\u003eCable seal grip\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eCompatible Probes\u003c\/td\u003e\n        \u003ctd\u003e3300 XL 8mm, 3300 XL 11mm, 3300 NSv\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the housing is installed according to the Bently Nevada 21000 series installation manual. For probe penetration depths exceeding 300 mm (12 in), additional sleeve support is required near the probe to prevent resonance. When installing, ensure the conduit thread is properly sealed. For hazardous area applications, ensure all fittings are installed correctly to maintain the integrity of the explosion-proof enclosure.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666540982635,"sku":"21000-00-00-00-250-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-00-00-00-250-03-02-probe-housing-assembly-kzg5no2cuxs_a09d75fa-30dc-4d71-aa40-874fcb539674.jpg?v=1765440466"},{"product_id":"bently-nevada-32000-28-05-15-080-03-02-metric-proximity-probe-housing-assembly","title":"Bently Nevada 32000-28-05-15-080-03-02 Metric Proximity Probe Housing Assembly","description":"\u003ch3\u003eCommercial Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e32000-28-05-15-080-03-02\u003c\/strong\u003e is a specialized, metric-threaded proximity probe housing assembly engineered by Bently Nevada for heavy-duty machinery protection systems. Designed for deployment in demanding environments such as gas turbine power plants, petrochemical refineries, and marine propulsion systems, this ruggedized hardware safeguards critical eddy current sensors from external mechanical impact and chemical exposure. The main junction housing is injection-molded from glass-reinforced polyphenylene sulfide (PPS), delivering exceptional dimensional stability and static dissipation. By facilitating safe external probe gaps and sensor swaps while the monitored machine remains online, this assembly eliminates catastrophic failures and drastically cuts down plant maintenance overhead.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cul class=\"ybc-ul-component list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e32000:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMetric proximity probe housing base assembly featuring a corrosion-resistant, high-performance PPS thermoplastic junction enclosure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-28:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIntegrated 3300 XL 8 mm proximity probe assembly with agency approvals for hazardous environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-05:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProbe unarmored cable length option configured at 0.5 meters (20 inches).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-15:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eExtended standoff adapter length precision-machined to 150 mm.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-080:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStandard probe sleeve penetration length set at 80 mm.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-03:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFitting configurations inclusive of two explosion-proof blanking plugs, one M20 conduit entry fitting, and one specialized cable seal grip.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-02:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMounting connection specifying 3\/4-14 NPT external coupling threads for rigid standoff adapter installation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineering Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth\u003e\n\u003cp\u003eParameter\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eSpecification\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eModel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e32000-28-05-15-080-03-02\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eBrand\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eBently Nevada\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eOrigin\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUnited States\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eProduct Type\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eProximity Probe Housing Assembly\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eEnclosure Material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eGlass-filled Polyphenylene Sulfide (PPS)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSleeve \u0026amp; Standoff Material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAISI 304 Stainless Steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTransducer Type\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3300 XL 8 mm Proximity Probe\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStandoff Length\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e150 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePenetration Depth\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMounting Interface\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3\/4-14 NPT External\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eConduit Entry Thread\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eM20 x 1.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eIngress Protection Rating\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66 \/ Type 4X\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAmbient Temperature Range\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-35 to 177 deg C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eApproximate Weight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2.2 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e315 mm x 115 mm x 115 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOperational FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the core structural difference between this model and the shorter -08 standoff variant?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe -15 suffix designates an extended 150 mm standoff adapter length. This extended configuration provides additional clearance to bridge thick thermal insulation blankets or complex external piping networks commonly found on high-temperature steam or gas turbines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the PPS plastic housing perform when exposed to aggressive industrial chemicals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe glass-reinforced PPS construction exhibits superior chemical inertness. It withstands prolonged exposure to synthetic lubricants, ammonia, hydrogen sulfide, and caustic washdown agents without cracking, corroding, or losing its static-dissipative properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs an external grounding strap required for this non-metallic junction housing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The advanced PPS formulation is intrinsically engineered to be static-dissipating. However, the stainless steel standoff adapter and sleeve provide a direct metal-to-metal bond to the machine casing, ensuring proper system grounding.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Commissioning and Safety Directives\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eInitial Mechanical Fit-Up\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInspect the machine port threads before installation. Thread the stainless steel sleeve through the 3\/4-14 NPT mounting adapter until the 3300 XL probe tip carefully seats against the target shaft area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLinear Range Alignment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect a standard digital multimeter across the signal and COM lines of the corresponding Proximitor monitor. Back the sleeve out slowly until the DC gap voltage reaches -10.0 VDC (the nominal midpoint of the 80 mil linear range) before clamping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTorque Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSecure the outer locknut assembly using a calibrated wrench to a torque limit of 34 N-m. Exceeding this torque limit when handling the PPS polymer structural housing can lead to localized thread stripping or casing fracturing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable Routing Protection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRoute the 0.5-meter internal probe cable through the provided cable seal grip without putting sharp bends on the coaxial line. Ensure the minimum bend radius of 25.4 mm (1.0 inch) is maintained inside the housing enclosure.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666541146475,"sku":"32000-28-05-15-080-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-32000-28-05-15-080-03-02-metric-proximity-probe-housingassemblies-tpqyhvp4a0q_4a8a7495-09e1-4093-b084-023216670481.jpg?v=1765440468"},{"product_id":"bently-nevada-32000-28-05-00-120-03-02-metric-proximity-probe-housing-assembly","title":"Bently Nevada 32000-28-05-00-120-03-02 Metric Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e32000-28-05-00-120-03-02\u003c\/strong\u003e: Metric proximity probe housing assembly designed for radially mounted eddy-current transducers, configured with a 3300 XL 8 mm probe featuring multiple agency approvals and a 0.5 m cable.\u003c\/p\u003e\n\u003cp\u003eThe 32000 Series proximity probe housing assemblies are recommended when mounting proximity probes through the machine casing. These assemblies are typically utilized for shaft vibration, axial position, or Keyphasor measurements on rotating machinery. By using this housing, engineers obtain direct external access to the proximity probe and extension cable, facilitating effortless gap adjustment or probe replacement without requiring complex machine disassembly. Constructed from glass-reinforced polyphenylene sulfide (PPS) conductive thermoplastic, the housing offers outstanding chemical and corrosion resistance, while the accompanying sleeve elements are made of corrosion-resistant stainless steel. The housing assembly is fully compliant with the American Petroleum Institute (API) 670 Standard for externally mounted proximity probe housings.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated 3300 XL 8 mm proximity probe (Option 28) with multiple hazardous area approvals.\u003c\/li\u003e\n  \u003cli\u003eShort-coupling 0.5 m (20 in) probe cable length (Option 05) for optimized enclosure wiring.\u003c\/li\u003e\n  \u003cli\u003eDirect-mount design without a standoff adapter (Option 00) for low-profile installation.\u003c\/li\u003e\n  \u003cli\u003eMedium penetration depth of 120 mm (Option 120) to reach inner machine targets.\u003c\/li\u003e\n  \u003cli\u003eM20 conduit entry fitting with two plugs and one cable seal grip (Option 03) suitable for armored probe cables.\u003c\/li\u003e\n  \u003cli\u003eIndustry standard 3\/4-14 NPT mounting thread (Option 02) to secure the outer sleeve to the machine case.\u003c\/li\u003e\n  \u003cli\u003eAPI 670 compliant design ensures structural compatibility with industrial machinery standards.\u003c\/li\u003e\n  \u003cli\u003eConductive glass-reinforced polyphenylene sulfide (PPS) housing material provides excellent corrosion resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eThis metric proximity probe housing assembly is suitable for monitoring applications in heavy industries such as power generation, oil and gas, petrochemical, and mining. Typical applications include radial shaft vibration measurements, axial shaft position monitoring, and Keyphasor phase reference measurements on steam turbines, gas turbines, compressors, pumps, and other high-speed rotating machinery.\u003c\/p\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption Segment\u003c\/th\u003e\n      \u003cth\u003eOption Code\u003c\/th\u003e\n      \u003cth\u003eDescription\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n      \u003ctd\u003e32000-28-05-00-120-03-02\u003c\/td\u003e\n      \u003ctd\u003eMetric Proximity Probe Housing Assembly\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n      \u003ctd\u003e28\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm probe, multiple approvals\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n      \u003ctd\u003e00\u003c\/td\u003e\n      \u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD - Probe Penetration Option\u003c\/td\u003e\n      \u003ctd\u003e120\u003c\/td\u003e\n      \u003ctd\u003e120 mm probe penetration length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eE - Fittings\u003c\/td\u003e\n      \u003ctd\u003e03\u003c\/td\u003e\n      \u003ctd\u003eTwo plugs, one M20 fitting, one cable seal grip with grommets for armored probe cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eF - Mounting Thread Option\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003e3\/4-14 NPT mounting thread\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePart Number\u003c\/td\u003e\n      \u003ctd\u003e32000-28-05-00-120-03-02\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eMetric Proximity Probe Housing Assembly\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHousing Material\u003c\/td\u003e\n      \u003ctd\u003eGlass-reinforced polyphenylene sulfide (PPS) conductive thermoplastic\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSleeve and Retaining Chain Material\u003c\/td\u003e\n      \u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOuter Sleeve and Exterior Screws Material\u003c\/td\u003e\n      \u003ctd\u003eAISI 303 stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eO-Ring Materials\u003c\/td\u003e\n      \u003ctd\u003eViton (internal probe case), Neoprene (sleeve-to-housing)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating and Storage Temperature (Probe)\u003c\/td\u003e\n      \u003ctd\u003e-51 degC to +177 degC (-60 degF to +351 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHousing Torque Rating (Retaining Nut)\u003c\/td\u003e\n      \u003ctd\u003e29.4 N-m (260 in-lb)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHousing Impact Strength\u003c\/td\u003e\n      \u003ctd\u003eCertified by BASEEFA to withstand two separate 4 Joule impacts at -39 degC and +115 degC; verified by CSA to withstand 7 Joule impact at ambient temperature\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSealing Integrity\u003c\/td\u003e\n      \u003ctd\u003eSealed to differential pressure between probe tip and housing body when used with a 3300 XL probe\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompliance\u003c\/td\u003e\n      \u003ctd\u003eFully compliant with API 670 standard for externally mounted proximity probe housings\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHousing Support Strength\u003c\/td\u003e\n      \u003ctd\u003eSupports 912 N (205 lb) placed 38 mm from the unsupported end\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e1.2 kg (2.6 lb) typical\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the machine casing is securely affixed to the bearing housing when using this housing assembly to measure radial shaft vibration, to prevent casing movement from introducing signal errors. For shaft axial position measurements using dual proximity probes, use the 21022 dual-probe housing instead of the 32000 assembly. Adjust the probe gap through the external sleeve access prior to tightening the outer retaining nut to a recommended torque of 29.4 N-m (260 in-lb). Grounding liners should be installed to prevent electrical noise, and the outer sleeve must be properly threaded and sealed with appropriate thread sealant to maintain casing pressure boundary integrity.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eThis assembly is fully compliant with API 670 standards. When installed in conjunction with an approved transducer system and appropriate intrinsically safe barriers, the housing assembly is suitable for intrinsically safe hazardous area applications. BASEEFA certified for low and high temperature mechanical impact tests. CSA certified for ambient temperature impact tests.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666545865067,"sku":"32000-28-05-00-120-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-32000-28-05-00-120-03-02-proximity-probe-housing-assemblies-ab5eka1kvx1_21c40494-47d3-4a3a-9282-a3125bb01a2d.jpg?v=1765440525"},{"product_id":"bently-nevada-31000-29-05-00-090-01-02-proximity-probe-housing-assembly","title":"Bently Nevada 31000-29-05-00-090-01-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e31000-29-05-00-090-01-02\u003c\/strong\u003e is a specialized 31000-series proximity probe housing assembly configured with a 3300 XL 8 mm proximity probe and connector protector (Option 29). This assembly includes a 0.5 m probe cable (Option 05), a 90 mm probe penetration depth (Option 090), and one M25 conduit fitting (Option 01). The housing features a 3\/4-14 NPT mounting thread (Option 02) and is designed to provide robust environmental and mechanical protection for transducer systems in industrial rotating machinery.\u003c\/p\u003e\n\n\u003cp\u003eUsed primarily for radially mounted transducers, this housing allows external access to the proximity probe and its extension cable. It permits essential maintenance, such as gap adjustment or probe replacement, without requiring disassembly of the machine case. Constructed from polyphenylene sulfide (PPS) thermoplastic with stainless steel components, the housing offers high corrosion resistance and complies with API 670 standards for externally mounted proximity probe housings.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated 3300 XL 8 mm proximity probe with connector protector\u003c\/li\u003e\n\u003cli\u003e0.5 m probe cable length for close-coupled monitoring applications\u003c\/li\u003e\n\u003cli\u003e90 mm probe penetration depth for accurate target positioning\u003c\/li\u003e\n\u003cli\u003eSingle M25 conduit fitting and two plugs\u003c\/li\u003e\n\u003cli\u003e3\/4-14 NPT mounting thread configuration\u003c\/li\u003e\n\u003cli\u003ePPS thermoplastic construction for corrosion resistance in harsh industrial environments\u003c\/li\u003e\n\u003cli\u003eCompatible with standard 3300 XL transducer systems for radial vibration and Keyphasor measurements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration monitoring for critical rotating machinery\u003c\/li\u003e\n\u003cli\u003eKeyphasor measurement and shaft position sensing\u003c\/li\u003e\n\u003cli\u003eHarsh environments requiring environmental and mechanical protection for transducers\u003c\/li\u003e\n\u003cli\u003eApplications where external access for probe maintenance is mandatory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-29-05-00-090-01-02\u003c\/td\u003e\n\u003ctd\u003eProximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e29\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, with connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e090\u003c\/td\u003e\n\u003ctd\u003e90 mm penetration depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e01\u003c\/td\u003e\n\u003ctd\u003eOne M25 fitting, two plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-29-05-00-090-01-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eGlass-reinforced Polyphenylene Sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSleeve\/Retainer Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 \/ 303 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the outer sleeve is correctly installed into the machine case before inserting the probe sleeve. Adjust the probe gap according to the transducer system requirements. After connecting the probe cable, install the housing over the outer sleeve and secure it using the retainer and retaining nut. Tighten hole plugs to 0.5 N-m (5 in-lb) to maintain environmental sealing. Consult the 31000\/32000 User Guide for complete grounding and shielding procedures.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eComplies with API 670 standard for externally mounted proximity probe housings. Suitable for use in hazardous area applications when installed with approved transducer systems and appropriate intrinsically safe (I.S.) barriers.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666548748651,"sku":"31000-29-05-00-090-01-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-29-05-00-090-01-02-proximity-probe-housing-cable-ujzxtznkfvx_21a92635-6842-48d5-ab55-c11ad75ae0e5.jpg?v=1765440559"},{"product_id":"bently-nevada-31000-28-10-00-026-00-02-english-proximity-probe-housing-assembly","title":"Bently Nevada 31000-28-10-00-026-00-02 English Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e31000-28-10-00-026-00-02\u003c\/strong\u003e is an English Proximity Probe Housing Assembly from Bently Nevada, specifically configured with a 3300 XL 8 mm probe and integrated connector protector (Option 28). This assembly is designed to facilitate the mounting of proximity probes through machinery cases, providing a secure, protected environment for radially mounted transducers used in vibration and Keyphasor measurements.\u003c\/p\u003e\n\n\u003cp\u003eThis configuration features a 1.0 m probe cable length (Option 10) and is supplied without fittings (Option 00) and with 3\/4-14 NPT mounting threads (Option 02). The housing is constructed from high-strength, corrosion-resistant polyphenylene sulfide (PPS) and stainless steel, ensuring environmental protection in industrial settings. This assembly allows for external access to the probe and extension cable, which simplifies gap adjustment and probe replacement without requiring the disassembly of the machine case.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 28:\u003c\/strong\u003e Includes 3300 XL 8 mm proximity probe with connector protector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 10:\u003c\/strong\u003e 1.0 m (39 in) probe cable length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 00:\u003c\/strong\u003e Standoff adapter configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 026:\u003c\/strong\u003e Probe penetration depth setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 00:\u003c\/strong\u003e Supplied without conduit fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 02:\u003c\/strong\u003e 3\/4-14 NPT mounting thread\u003c\/li\u003e\n\u003cli\u003eMaterial: Polyphenylene sulfide (PPS) housing with stainless steel components\u003c\/li\u003e\n\u003cli\u003eCompliance: API 670 standard for externally mounted proximity probe housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration monitoring on rotating machinery\u003c\/li\u003e\n\u003cli\u003eKeyphasor measurements\u003c\/li\u003e\n\u003cli\u003eInstallation in hazardous areas when used with approved transducer systems and I.S. barriers\u003c\/li\u003e\n\u003cli\u003ePower generation, petrochemical, and oil and gas sector machinery protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-10-00-026-00-02\u003c\/td\u003e\n\u003ctd\u003e31000 English Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, with connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNone \/ Default\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e026\u003c\/td\u003e\n\u003ctd\u003ePenetration depth setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eWithout fittings (two plugs and washers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-10-00-026-00-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware Material\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Type\u003c\/td\u003e\n\u003ctd\u003eNone (plugs and washers provided)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Probe\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the outer sleeve into the machine case before attaching the housing.\u003c\/li\u003e\n\u003cli\u003eAdjust the probe gap according to standard transducer system requirements before finalizing the housing position.\u003c\/li\u003e\n\u003cli\u003eEnsure conduit fittings or hole plugs are tightened appropriately to maintain environmental seal.\u003c\/li\u003e\n\u003cli\u003eIf utilizing in hazardous areas, ensure installation complies with local safety codes and uses appropriate I.S. barriers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAPI 670 Standard (Externally mounted proximity probe housings)\u003c\/li\u003e\n\u003cli\u003eCompliant with hazardous area requirements when used in approved systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666549535083,"sku":"31000-28-10- 00-026-00-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-10-00-026-00-02-proximity-probe-housings-orns5jsock2_292e60c1-9b7a-49ae-9dd6-2eec58ddf710.jpg?v=1765440579"},{"product_id":"bently-nevada-21000-34-05-15-29-04-02-proximity-probe-housing-assemblies","title":"Bently Nevada 21000-34-05-15-29-04-02 Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e21000-34-05-15-29-04-02\u003c\/strong\u003e is a configured proximity probe housing assembly designed for use with the 3300 XL NSv proximity transducer system. This specific variant includes a 3300 XL NSv probe with a connector protector and selectable hazardous area approvals (Option 34). It features a 0.5 m (20 in) probe cable length (Option 05) and a 1.5 in (38 mm) standoff adapter (Option 15). The probe penetration is set to 2.9 in (Option 29), combined with a 3\/4-14 NPT plug (Option 04) and 3\/4-14 NPT mounting thread (Option 02).\u003c\/p\u003e\n\n\u003cp\u003eThe 21000 series aluminum housing provides protection for externally mounted proximity probes in industrial environments. It facilitates secure installation and maintains environmental integrity, ensuring consistent measurements for machinery vibration and position monitoring. The design is optimized for integration with 3300 XL systems, providing robust support and cable management. This assembly is standard-rated for various industrial applications and must be installed according to the appropriate probe system user guide to ensure proper performance.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOption 34: 3300 XL NSv probe with connector protector and selectable hazardous area approvals\u003c\/li\u003e\n\u003cli\u003eOption 05: 0.5 m (20 in) integral probe cable\u003c\/li\u003e\n\u003cli\u003eOption 15: 1.5 in (38 mm) standoff adapter length\u003c\/li\u003e\n\u003cli\u003eOption 29: 2.9 in probe penetration length\u003c\/li\u003e\n\u003cli\u003eOption 04: One 3\/4-14 NPT plug fitting\u003c\/li\u003e\n\u003cli\u003eOption 02: 3\/4-14 NPT mounting thread\u003c\/li\u003e\n\u003cli\u003eAluminum body construction for environmental protection\u003c\/li\u003e\n\u003cli\u003eCompatibility with 3300 XL NSv proximity transducer systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHydrocarbon and petrochemical processing facilities\u003c\/li\u003e\n\u003cli\u003ePower generation and turbine monitoring\u003c\/li\u003e\n\u003cli\u003eCritical rotating machinery vibration protection\u003c\/li\u003e\n\u003cli\u003eAxial position and shaft radial vibration measurement\u003c\/li\u003e\n\u003cli\u003eExternal probe mounting in demanding industrial environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e21000-34-05-15-29-04-02\u003c\/td\u003e\n\u003ctd\u003e21000 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe\u003c\/td\u003e\n\u003ctd\u003e34\u003c\/td\u003e\n\u003ctd\u003e3300 XL NSv probe with connector protector, selectable hazardous area approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e1.5 in (38 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e29\u003c\/td\u003e\n\u003ctd\u003e2.9 in (74 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e04\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT plug only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e21000-34-05-15-29-04-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Material\u003c\/td\u003e\n\u003ctd\u003eAluminum with 304 stainless steel sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (Typical)\u003c\/td\u003e\n\u003ctd\u003e1.1 kg (2.4 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-34 degC to +177 degC (3300 NSv Probe)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandoff Adapter\u003c\/td\u003e\n\u003ctd\u003e1.5 in (38 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the probe lead is longer than the sleeve to maintain proper system connectivity.\u003c\/li\u003e\n\u003cli\u003eFor probe penetration lengths (C + D) greater than 300 mm (12 in), provide additional sleeve support to prevent resonance.\u003c\/li\u003e\n\u003cli\u003eAvoid exposing 3300 XL or 3300 NSv probes to temperatures below -34 degC (-30 degF) to prevent pressure seal failure.\u003c\/li\u003e\n\u003cli\u003eUse appropriate thread sealing techniques for NPT connections to maintain environmental ratings.\u003c\/li\u003e\n\u003cli\u003eRefer to the 3300 XL NSv Proximity Transducer System User Guide (document 147357) for specific electrical installation and gap requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRoHS Directive 2011\/65\/EU\u003c\/li\u003e\n\u003cli\u003eCSA certified for explosion-proof applications (CA versions only for North American end users)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666549928299,"sku":"21000-34-05-15-29-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-34-05-15-29-04-02-high-speed-communication-interface-pq1ic22pykm_bc9b24e1-6e57-499f-bc8d-59cb44d9636c.jpg?v=1765440583"},{"product_id":"bently-nevada-31000-16-05-00-037-03-02-english-proximity-probe-housing-assembly","title":"Bently Nevada 31000-16-05-00-037-03-02 English Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e31000-16-05-00-037-03-02\u003c\/strong\u003e is an \u003cstrong\u003eEnglish Proximity Probe Housing Assembly\u003c\/strong\u003e designed for industrial machinery protection systems. This housing provides the necessary environmental protection and structural mounting for proximity probes, ensuring consistent transducer gap measurement in vibration monitoring applications. The assembly is built to support accurate shaft position and vibration data collection while isolating the probe electronics from harsh process conditions.\u003c\/p\u003e\n\u003cp\u003eThe configuration utilizes specific options for thread sizes and conduit fittings to match standard English-unit instrumentation requirements. This assembly serves as a critical mechanical interface between the sensing probe and the external monitoring system, maintaining stability and shielding the signal path from electromagnetic interference (EMI) and mechanical damage.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStandardized mechanical interface for proximity probe mounting and protection\u003c\/li\u003e\n\u003cli\u003eEngineered for use in demanding industrial environments including power generation and rotating machinery\u003c\/li\u003e\n\u003cli\u003eProvides electrical shielding for transducer signal integrity\u003c\/li\u003e\n\u003cli\u003eCompatible with standard English-thread mounting interfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHydroelectric power plant monitoring\u003c\/li\u003e\n\u003cli\u003eSteam and gas turbine vibration protection\u003c\/li\u003e\n\u003cli\u003eCompressor and centrifugal pump condition monitoring\u003c\/li\u003e\n\u003cli\u003eHeavy-duty rotating machinery surveillance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-16-05-00-037-03-02\u003c\/td\u003e\n\u003ctd\u003eEnglish Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe Thread\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e1\/2-20 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Housing Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Fitting Type\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Conduit Length\u003c\/td\u003e\n\u003ctd\u003e037\u003c\/td\u003e\n\u003ctd\u003e37 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Conduit Type\u003c\/td\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Agency Approval\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eCSA\/NRTL\/C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-16-05-00-037-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Type\u003c\/td\u003e\n\u003ctd\u003eEnglish Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Size\u003c\/td\u003e\n\u003ctd\u003e1\/2-20 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Length\u003c\/td\u003e\n\u003ctd\u003e5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConduit Length\u003c\/td\u003e\n\u003ctd\u003e37 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConduit Material\u003c\/td\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eCSA\/NRTL\/C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the housing is mounted securely to the machine case to prevent false vibration readings caused by mechanical resonance. Use appropriate thread sealants if required by the specific application environment to maintain a hermetic seal against oil or moisture. Ensure the internal proximity probe is set to the correct electrical gap relative to the shaft target before final tightening of the locknut. Ensure the conduit is properly clamped to avoid stress on the probe connector.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666550157675,"sku":"31000-16-05-00-037-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-16-05-00-037-03-02-proximity-probe-housing-1fxi3wayolj_e62a08d7-fbaa-4f25-a615-1aef4038708b.jpg?v=1765440589"},{"product_id":"bently-nevada-32000-28-05-08-080-03-02-proximity-probe-housing-assembly","title":"Bently Nevada 32000-28-05-08-080-03-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e32000-28-05-08-080-03-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a ruggedized, metric proximity probe housing assembly engineered by Bently Nevada for demanding critical machinery monitoring setups. Deployed extensively in petrochemical plants, liquefied natural gas facilities, and power generation stations, this assembly protects internal eddy current sensors from harsh environments while enabling continuous radial vibration and Keyphasor measurements. The specialized glass-reinforced polyphenylene sulfide housing dissipates static and resists chemical attack, eliminating unplanned downtime caused by sensor casing deterioration. By allowing external probe adjustments during machine operation, this housing significantly minimizes maintenance schedules on critical turbines, compressors, and high-speed pumps.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e32000:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMetric proximity probe housing base model utilizing high-strength, static-dissipating PPS thermoplastic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-28:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBuilt-in 3300 XL 8 mm proximity probe configured with multiple international hazardous area certifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-05:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIntegrated probe cable length measuring 0.5 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-08:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStandoff adapter length machined to 80 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-080:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProbe sleeve penetration depth rated at 80 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-03:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFitting options comprising two blanking plugs, one M20 conduit fitting, and one specialized cable seal grip for armored probe cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-02:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMounting thread option specifying 3\/4-14 NPT external threads for standard standoff adapter installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineering Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth\u003e\n\u003cp\u003eParameter\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eSpecification\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eModel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e32000-28-05-08-080-03-02\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eBrand\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eBently Nevada\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eOrigin\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUnited States\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eProduct Type\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eProximity Probe Housing Assembly\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eHousing Material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eGlass-reinforced Polyphenylene Sulfide (PPS)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSleeve Material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAISI 304 Stainless Steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eProbe Type\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3300 XL 8 mm Eddy Current Sensor\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePenetration Depth\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStandoff Length\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMounting Thread\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3\/4-14 NPT\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eConduit Interface\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eM20 x 1.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eEnvironmental Protection\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66 \/ Type 4X\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eOperating Temperature\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-35 to 177 deg C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eApproximate Weight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.8 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e245 mm x 115 mm x 115 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOperational FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan the probe gap voltage be calibrated without shutting down the rotating machinery?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The external adjustment mechanism allows technicians to loosen the locknuts and thread the probe sleeve inward or outward while the machine is running, permitting real-time gap voltage verification via the Proximitor sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the correct procedure if moisture ingress is discovered inside the PPS junction housing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIsolate the loop power and inspect the internal O-rings for degradation. Clean the housing interior with an electronics-safe solvent, ensure the M20 cable seal grip is tightened to the recommended torque specification, and verify the blanking plugs are fully seated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this specific configuration backward compatible with older 3300 series 8 mm proximity probes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3300 XL 8 mm probe embedded in this assembly maintains complete electrical and mechanical compatibility with legacy 3300 series Proximitor sensors and extension cables, provided the total system electrical length matches 5.0 meters or 9.0 meters as required by the application.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Commissioning and Safety Directives\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Positioning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThread the housing assembly into the machine casing port until the probe tip lightly touches the target shaft. Back off the assembly counterclockwise to establish a preliminary mechanical clearance before locking down the standoff adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Fine-Tuning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect a digital multimeter to the Proximitor sensor output terminals. Adjust the probe position externally until the multimeter reads exactly -10.0 VDC, corresponding to the center of the linear calibration range for a standard 3300 XL 8 mm probe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTorque Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTighten the outer housing locknuts to 34 N-m to prevent shifting from machinery vibration. Avoid over-torquing the PPS polymer components to prevent structural cracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental Sealing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEnsure the M20 conduit entry points use appropriate thread sealant or approved cord grips to maintain the IP66 environmental rating against ingress of synthetic lube oils and ambient moisture.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666554286443,"sku":"32000-28-05-08-080-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-32000-28-05-08-080-03-02-metric-proximity-probe-housingassemblies-ewpdk0qa3rj_ed0b82a6-2d78-4855-aaec-54c0b08a8766.jpg?v=1765440611"},{"product_id":"bently-nevada-31000-28-10-00-235-00-02-31000-english-proximity-probe-housing-assemblies","title":"Bently Nevada 31000-28-10-00-235-00-02 31000 English Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nThe \u003cstrong\u003e31000-28-10-00-235-00-02\u003c\/strong\u003e is an English proximity probe housing assembly designed for 3300 XL 8 mm proximity probe integration, featuring a built-in connector protector (Option 28) and a 1.0 m probe cable length (Option 10). This assembly provides robust mechanical and environmental protection for proximity transducers, facilitating external access for gap adjustments or probe replacement without requiring machine disassembly.\n\nConstructed from high-strength polyphenylene sulfide (PPS) with stainless steel components, this housing adheres to API 670 standards for externally mounted proximity probe housings. The configuration includes no standoff adapter (Option 00) and a probe penetration depth of 235 mm (Option 235), utilizing 3\/4-14 NPT mounting threads (Option 02) without auxiliary fittings (Option 00).\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated 3300 XL 8 mm proximity probe with connector protector\u003c\/li\u003e\n\u003cli\u003e1.0 m probe cable length\u003c\/li\u003e\n\u003cli\u003ePolyphenylene sulfide (PPS) housing material for superior corrosion resistance\u003c\/li\u003e\n\u003cli\u003eStainless steel internal components\u003c\/li\u003e\n\u003cli\u003e235 mm probe penetration depth\u003c\/li\u003e\n\u003cli\u003e3\/4-14 NPT mounting thread configuration\u003c\/li\u003e\n\u003cli\u003eDesigned for radial vibration and Keyphasor measurements\u003c\/li\u003e\n\u003cli\u003eAPI 670 compliant design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration monitoring on rotating machinery\u003c\/li\u003e\n\u003cli\u003eKeyphasor measurement and shaft speed detection\u003c\/li\u003e\n\u003cli\u003eCritical machinery protection in power generation, petrochemical, and oil and gas industries\u003c\/li\u003e\n\u003cli\u003eHazardous area environments (when installed with approved transducer systems and I.S. barriers)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-10-00-235-00-02\u003c\/td\u003e\n\u003ctd\u003e31000 English Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, with connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e235\u003c\/td\u003e\n\u003ctd\u003e235 mm penetration depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eWithout fittings; two plugs and two washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-10-00-235-00-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Components\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Penetration\u003c\/td\u003e\n\u003ctd\u003e235 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings\u003c\/td\u003e\n\u003ctd\u003eNone (two plugs, two washers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the machine casing is properly affixed to the bearing to maintain accurate relative vibration signals.\u003c\/li\u003e\n\u003cli\u003eInstall the outer sleeve into the machine case before inserting the probe sleeve.\u003c\/li\u003e\n\u003cli\u003eAdjust the probe gap after inserting the probe sleeve into the housing.\u003c\/li\u003e\n\u003cli\u003eEnsure all captive screws on the housing cover are tightened after re-connecting cables.\u003c\/li\u003e\n\u003cli\u003eTighten hole plug nuts to 0.5 N-m (5 in-lbs) if unused holes are present.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAPI 670 Standard (Externally mounted proximity probe housings)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666557661547,"sku":"31000-28-10-00-235-00-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-10-00-235-00-02-probe-housing-nybpfiezei2_ffb84bc6-3a52-484f-902f-155534980663.jpg?v=1765440642"},{"product_id":"bently-nevada-31000-28-05-70-066-00-02-english-proximity-probe-housing-assembly","title":"Bently Nevada 31000-28-05-70-066-00-02 English Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nOption 28 (3300 XL 8 mm probe, multiple approvals) and Option 02 (3\/4-14 NPT mounting thread) define this \u003cstrong\u003e31000-28-05-70-066-00-02\u003c\/strong\u003e proximity probe housing assembly, configured with a 0.5 m probe cable (Option 05) and 66 mm probe penetration (Option 066). This assembly provides a robust, externally accessible solution for mounting proximity transducers through machine cases, facilitating vibration and Keyphasor measurements in heavy industrial environments.\n\nConstructed from polyphenylene sulfide (PPS), this housing offers high-strength, corrosion-resistant protection for transducer components. It is fully compliant with API 670 standards for externally mounted proximity probe housings, allowing for gap adjustment or sensor replacement without the need to disassemble the monitored machine. This configuration includes a standoff adapter for specific penetration requirements and utilizes an unthreaded fitting setup (Option 00) for versatile installation.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated 3300 XL 8 mm proximity probe with multiple hazardous area approvals\u003c\/li\u003e\n\u003cli\u003ePPS housing material with stainless steel components for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eAPI 670 compliant design for external machine case mounting\u003c\/li\u003e\n\u003cli\u003e3\/4-14 NPT mounting thread for secure installation\u003c\/li\u003e\n\u003cli\u003e0.5 m integral probe cable length\u003c\/li\u003e\n\u003cli\u003eSupports external gap adjustment and probe replacement\u003c\/li\u003e\n\u003cli\u003eDesigned for radial vibration and Keyphasor measurement chains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHydrocarbon processing facilities\u003c\/li\u003e\n\u003cli\u003ePower generation and turbine monitoring\u003c\/li\u003e\n\u003cli\u003eOil and gas rotating machinery\u003c\/li\u003e\n\u003cli\u003eWater treatment and pumping stations\u003c\/li\u003e\n\u003cli\u003eIndustrial rotating equipment vibration protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003cth\u003eOption\u003c\/th\u003e\n    \u003cth\u003eCode on This SKU\u003c\/th\u003e\n    \u003cth\u003eMeaning\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n    \u003ctd\u003e31000-28-05-70-066-00-02\u003c\/td\u003e\n    \u003ctd\u003eEnglish Proximity Probe Housing Assembly\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n    \u003ctd\u003e28\u003c\/td\u003e\n    \u003ctd\u003e3300 XL 8 mm probe, multiple approvals\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n    \u003ctd\u003e05\u003c\/td\u003e\n    \u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n    \u003ctd\u003e70\u003c\/td\u003e\n    \u003ctd\u003eStandoff Adapter Option (7.0 in)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eD - Probe Penetration Option\u003c\/td\u003e\n    \u003ctd\u003e066\u003c\/td\u003e\n    \u003ctd\u003e66 mm probe penetration length\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eE - Fittings\u003c\/td\u003e\n    \u003ctd\u003e00\u003c\/td\u003e\n    \u003ctd\u003eWithout fittings; two plugs and two washers\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n    \u003ctd\u003e02\u003c\/td\u003e\n    \u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eManufacturer\u003c\/td\u003e\n    \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003ePart Number\u003c\/td\u003e\n    \u003ctd\u003e31000-28-05-70-066-00-02\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eHousing Material\u003c\/td\u003e\n    \u003ctd\u003ePolyphenylene sulfide (PPS) and stainless steel\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eProbe Type\u003c\/td\u003e\n    \u003ctd\u003e3300 XL 8 mm proximity probe\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eMounting Thread\u003c\/td\u003e\n    \u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eFittings\u003c\/td\u003e\n    \u003ctd\u003eNone (Supplied with two plugs and two washers)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eCable Length\u003c\/td\u003e\n    \u003ctd\u003e0.5 m\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eStandards Compliance\u003c\/td\u003e\n    \u003ctd\u003eAPI 670\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the outer sleeve into the machine case before mounting the housing.\u003c\/li\u003e\n\u003cli\u003eAdjust the probe gap by sliding the probe sleeve within the assembly.\u003c\/li\u003e\n\u003cli\u003eEnsure the housing cover is tightened to the specified torque after installation to maintain environmental protection.\u003c\/li\u003e\n\u003cli\u003eUse the provided hole plugs to seal unused ports on the housing base.\u003c\/li\u003e\n\u003cli\u003eWhen measuring radial vibration, ensure the machine casing is properly affixed to the bearing to maintain signal accuracy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAPI 670 compliant for externally mounted proximity probe housings.\u003c\/li\u003e\n\u003cli\u003eSupports intrinsically safe hazardous area installations when used with approved transducer systems and I.S. barriers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666561626475,"sku":"31000-28-05-70-066-00-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-05-70-066-00-02-proximity-probe-housing-assemblies-odgstyaxpxr_cdbf77f4-5c33-4041-bb97-7aa0420897b1.jpg?v=1765440663"},{"product_id":"bently-nevada-21000-28-05-00-076-04-02-21000-proximity-probe-housing-assembly","title":"Bently Nevada 21000-28-05-00-076-04-02 21000 Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e21000-28-05-00-076-04-02\u003c\/strong\u003e: 21000 Proximity Probe Housing Assembly with a 3300 XL 8 mm reverse-mount proximity probe with selectable hazardous area approvals (Option 28), 0.5 meter (20 in) probe cable (Option 05), zero standoff adapter length (Option 00), 7.6 in (193 mm) probe penetration (Option 076), one 3\/4-14 NPT plug fitting (Option 04), and a 3\/4-14 NPT mounting thread (Option 02).\u003c\/p\u003e\n\u003cp\u003eThis all-metal assembly is used for external mounting of proximity probes on rotating machinery. Compliant with the American Petroleum Institute (API) 670 Standard, it features an aluminum body with a 304 stainless steel sleeve. The sleeve houses and protects the reverse-mount probe, allowing external adjustments of the probe gap during machine operation. This variant uses a 0.5 meter cable and is supplied without a standoff adapter, achieving a direct sleeve penetration of 7.6 inches through the machine case. Port protection is managed via a single NPT plug, while the mounting thread is machined with approximately 5 to 7 full threads to increase connection stiffness and mechanical strength.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOption 28: Houses a 3300 XL 8 mm reverse-mount probe with multiple hazardous area approvals.\u003c\/li\u003e\n  \u003cli\u003eOption 05: Equipped with a 0.5 meter (20 inches) probe cable.\u003c\/li\u003e\n  \u003cli\u003eOption 00: Features no standoff adapter, mounting directly to the machine case.\u003c\/li\u003e\n  \u003cli\u003eOption 076: Machined sleeve providing a probe penetration length of 7.6 inches (193 mm).\u003c\/li\u003e\n  \u003cli\u003eOption 04: Supplied with one 3\/4-14 NPT plug for unused conduit entries.\u003c\/li\u003e\n  \u003cli\u003eOption 02: Standard 3\/4-14 NPT mounting thread with 5 to 7 full threads for high connection stiffness.\u003c\/li\u003e\n  \u003cli\u003eAluminum housing body: Lightweight and resistant to corrosion in industrial environments.\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel sleeve: Provides mechanical protection for the sensor probe tip and cable.\u003c\/li\u003e\n  \u003cli\u003eAPI 670 compliance: Meets standard dimensions and sealing requirements for externally mounted proximity probe housings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eExternally mounted vibration and position monitoring on steam turbines, gas turbines, and compressors.\u003c\/li\u003e\n  \u003cli\u003eShaft radial vibration, axial position, and speed measurements under API 670 specifications.\u003c\/li\u003e\n  \u003cli\u003eIndustrial environments requiring explosion-proof or flameproof housing protection for proximity sensors.\u003c\/li\u003e\n  \u003cli\u003ePetrochemical plants, oil and gas refineries, and power generation facilities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption \/ Segment\u003c\/th\u003e\n      \u003cth\u003eCode on This SKU\u003c\/th\u003e\n      \u003cth\u003eDescription \/ Meaning\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOrderable Part Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e21000-28-05-00-076-04-02\u003c\/td\u003e\n      \u003ctd\u003eProximity Probe Housing Assembly\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eA: Probe Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e28\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm probe, selectable hazardous area approvals\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eB: Probe Cable Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003e0.5 meter (20 inches)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eC: Standoff Adapter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e00\u003c\/td\u003e\n      \u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eD: Probe Penetration\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e076\u003c\/td\u003e\n      \u003ctd\u003e7.6 inches (193 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eE: Fittings\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e04\u003c\/td\u003e\n      \u003ctd\u003eOne 3\/4-14 NPT plug only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eF: Mounting Thread\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003e3\/4-14 NPT (with 5 to 7 full threads)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModel \/ Part Number\u003c\/td\u003e\n      \u003ctd\u003e21000-28-05-00-076-04-02\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eProximity Probe Housing Assembly\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHousing Material\u003c\/td\u003e\n      \u003ctd\u003eAluminum body with 304 stainless steel sleeve\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Type Included\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm reverse-mount proximity probe\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Cable Length\u003c\/td\u003e\n      \u003ctd\u003e0.5 meter (20 inches)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStandoff Adapter Length\u003c\/td\u003e\n      \u003ctd\u003eNone (0.0 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSleeve Penetration Length\u003c\/td\u003e\n      \u003ctd\u003e7.6 inches (193 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Thread\u003c\/td\u003e\n      \u003ctd\u003e3\/4-14 NPT (machined with 5 to 7 full threads)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConduit Fittings\u003c\/td\u003e\n      \u003ctd\u003eOne 3\/4-14 NPT plug\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Operating\/Storage Temperature\u003c\/td\u003e\n      \u003ctd\u003e-51 degC to +177 degC (-60 degF to +351 degF) (Caution: exposure below -34 degC \/ -30 degF can damage pressure seals)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n      \u003ctd\u003eCSA Type 4 (when configured as CA21000 or with appropriate approvals)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompliance Standard\u003c\/td\u003e\n      \u003ctd\u003eComplies with API 670 Standard specifications\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e1.1 kg (2.4 lb) typical, without fittings\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSleeve Support:\u003c\/strong\u003e Since the probe penetration length (Option D) is 7.6 inches (193 mm), additional sleeve support is not required by the 12-inch rule, but proper alignment within the mounting port must be maintained.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting Stiffness:\u003c\/strong\u003e Ensure the 3\/4-14 NPT mounting thread (Option F: 02) is tightened securely. This machined thread provides approximately 5 to 7 full threads for high strength and connection stiffness.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProbe Gapping:\u003c\/strong\u003e Adjust the probe gap externally by threading the assembly in or out of the case before final tightening. Refer to the 3300 XL 8 mm Transducer System User Guide for exact voltage-to-gap calibration details.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConduit Sealing:\u003c\/strong\u003e Use the supplied 3\/4-14 NPT plug to seal unused conduit entries and maintain enclosure integrity against moisture and dirt ingress.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Limit:\u003c\/strong\u003e Avoid exposing the internal probe to temperatures below -34 degC (-30 degF) to prevent damage to the probe pressure seals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoHS:\u003c\/strong\u003e European Community Directive 2011\/65\/EU compliant.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure Protection:\u003c\/strong\u003e Complies with API 670 requirements and Type 4 enclosure ratings.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHazardous Area Safety:\u003c\/strong\u003e Accommodates intrinsically safe and explosion-proof probes certified under CSA, ATEX, and IECEx schemes (Option 28 selectable approvals).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666562150763,"sku":"21000-28-05-00-076-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-28-05-00-076-04-02-sensor-sckn4zft2lu_adf4e42d-292d-4319-9e5c-425448fdef1f.jpg?v=1765440670"},{"product_id":"bently-nevada-31000-28-05-00-037-03-02-3300-xl-8-mm-proximity-probe-housing-assembly","title":"Bently Nevada 31000-28-05-00-037-03-02 3300 XL 8 mm Proximity Probe Housing Assembly","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e31000-28-05-00-037-03-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a ruggedized Proximity Probe Housing Assembly designed for external mounting of 3300 XL 8 mm transducers. This assembly is a critical infrastructure component in refineries, thermal power plants, and mining operations, where it facilitates radial vibration or Keyphasor measurements without requiring machine disassembly. By allowing external access for gap adjustment and probe replacement, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e31000\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eseries significantly minimizes MTTR (Mean Time To Repair) and operational downtime. Constructed from high-strength, glass-reinforced Polyphenylene Sulfide (PPS) and stainless steel, this housing is fully compliant with API 670 standards, providing an explosion-proof and corrosion-resistant barrier for proximity probes in the most hazardous and demanding industrial environments.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe configuration string\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e31000-28-05-00-037-03-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edefines the precise mechanical and electrical interface of the housing:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e28 (Probe with Connector):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIncludes a 3300 XL 8 mm probe with multiple international approvals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05 (Probe Cable Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEquipped with a 0.5 meter (20 inch) probe cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00 (Standoff Adapter Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNo standoff adapter is utilized for this configuration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e037 (Probe Penetration Option):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSpecifies a \"D\" dimension of 3.7 inches (94 mm) for probe depth into the machine casing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e03 (Fittings):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIncludes a comprehensive fitting kit: two plugs, one 3\/4-14 NPT fitting, one SST reducer (3\/4-14 to 1\/2-14 NPT), and a cable seal grip with multiple grommets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02 (Mounting Thread Option):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUtilizes a 3\/4-14 NPT mounting thread.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e31000-28-05-00-037-03-02\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProbe Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eHousing Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eGlass-reinforced Polyphenylene Sulfide (PPS)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSleeve\/Screw Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 304 and 303 Stainless Steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProtection Rating\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNEMA 4X, IP66, CSA Certified\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 to +177 deg C (-60 to +351 deg F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eImpact Strength\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCertified for 4 Joule impacts at temperature extremes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTypical Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.2 kg (2.6 lb)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eMounting Thread\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/4-14 NPT\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eAPI Standard\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFully compliant with API 670\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eField Engineering FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan this housing be used for axial thrust position measurements?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the 31000 is the standard for radial vibration, Bently Nevada recommends the 21022 housing for dual proximity probe axial position measurements to ensure proper alignment and redundancy required for thrust safety.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the PPS material perform in chemically aggressive environments?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePolyphenylene Sulfide (PPS) is an advanced thermoplastic known for exceptional corrosion resistance. It withstands most industrial chemicals, though users should monitor pH levels as extreme values can erode the probe tip over time, potentially compromising the pressure seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the housing designed to hold internal machine pressure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 31000 is certified for NEMA 4X (hose-directed water) and IP66, but it is not a pressure-rated vessel. It seals differential pressure between the probe tip and housing body via Viton and Neoprene O-rings, but it is not designed to resist high internal machine pressures.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering Installation and Maintenance Guidelines\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Resonance Prevention:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor total sleeve lengths (\"C\" plus \"D\" dimensions) exceeding 12 inches (305 mm), additional sleeve support must be installed near the probe tip. Failure to provide this support can lead to mechanical resonance, causing signal noise or fatigue failure of the sleeve.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTorque Requirements:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDuring installation, the retaining nut must be torqued to exactly 29.4 N-m (260 in-lb). Proper torque ensures environmental sealing and prevents the probe from backing out due to machine vibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStatic Dissipation in Hazardous Areas:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe PPS housing material is designed for electrostatic dissipation in compliance with EN50014. Always ensure the grounding liner is installed and that the housing is properly bonded to the machine earth to prevent the buildup of static charges in explosive atmospheres.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eO-Ring Inspection:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDuring any probe adjustment, inspect the Neoprene O-ring between the sleeve and the housing. If the O-ring shows signs of compression set or chemical degradation, it must be replaced to maintain the IP66 environmental rating.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666563756395,"sku":"31000-28-05-00-037-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-05-00-037-03-02-englishproximity-probe-housingassemblies-n4z43uttmso_4b472205-6401-4631-aff1-9fb3cd806022.jpg?v=1765440704"},{"product_id":"bently-nevada-21000-16-05-00-055-03-02-proximity-probe-housing-assembly","title":"Bently Nevada 21000-16-05-00-055-03-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e21000-16-05-00-055-03-02\u003c\/strong\u003e is a Bently Nevada aluminum proximity probe housing assembly designed for the external mounting of eddy-current proximity probes. This configuration includes a \u003cstrong\u003e3300 XL 8 mm proximity probe\u003c\/strong\u003e (Option 16) with a \u003cstrong\u003e0.5 m (20 in) probe cable length\u003c\/strong\u003e (Option 05). It is engineered to provide a robust, protective environment for the probe, meeting API 670 standards for machinery vibration and position monitoring.\u003c\/p\u003e\n\n\u003cp\u003eThis assembly features a \u003cstrong\u003e0.0 in standoff adapter\u003c\/strong\u003e (Option 00) and a \u003cstrong\u003e5.5 in probe penetration length\u003c\/strong\u003e (Option 055). The housing is equipped with a cable seal grip fitting (Option 03) and utilizes \u003cstrong\u003e3\/4-14 NPT mounting threads\u003c\/strong\u003e (Option 02). The 21000 series is constructed from durable aluminum, offering a cost-effective solution for industrial machinery protection in non-hazardous or appropriately approved installations.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProbe: 3300 XL 8 mm proximity probe\u003c\/li\u003e\n\u003cli\u003eCable Length: 0.5 m (20 in)\u003c\/li\u003e\n\u003cli\u003eStandoff Adapter: None (0.0 in)\u003c\/li\u003e\n\u003cli\u003eProbe Penetration: 5.5 in\u003c\/li\u003e\n\u003cli\u003eFittings: One cable seal grip with grommets for varied cable sizes (1\/8 to 3\/8 inches)\u003c\/li\u003e\n\u003cli\u003eMounting Thread: 3\/4-14 NPT\u003c\/li\u003e\n\u003cli\u003eBody Material: Aluminum body with 304 stainless steel sleeve\u003c\/li\u003e\n\u003cli\u003eCompliance: API 670 compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eThis proximity probe housing assembly is used in industrial rotating machinery applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSteam and gas turbines\u003c\/li\u003e\n\u003cli\u003eCentrifugal compressors\u003c\/li\u003e\n\u003cli\u003eLarge pumps and motors\u003c\/li\u003e\n\u003cli\u003eFans and blowers\u003c\/li\u003e\n\u003cli\u003eReciprocating compressors (where non-contact monitoring is required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e21000-16-05-00-055-03-02\u003c\/td\u003e\n\u003ctd\u003e21000 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe Series\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e055\u003c\/td\u003e\n\u003ctd\u003e5.5 in penetration length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eOne cable seal grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e21000-16-05-00-055-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Material\u003c\/td\u003e\n\u003ctd\u003eAluminum body with 304 stainless steel sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings\u003c\/td\u003e\n\u003ctd\u003eCable seal grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC (-60 degF to +351 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMass (Weight)\u003c\/td\u003e\n\u003ctd\u003e1.1 kg (2.4 lb) typical (without fittings)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eRoHS, API 670\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the housing is mounted securely to the machine case. For probe penetration lengths greater than 300 mm (12 in), auxiliary sleeve support is required to minimize vibration-induced resonance. Ensure all conduit fittings are tightened to maintain the enclosure integrity. When installing the probe into the housing, ensure the correct gap is maintained per the specific 3300 XL probe system documentation.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eThe 21000 series housing assemblies are compliant with RoHS Directive 2011\/65\/EU and the American Petroleum Institute (API) 670 Standard for externally mounted proximity probe housings.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666566443371,"sku":"21000-16-05-00-055-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-16-05-00-055-03-02-proximity-probehousing-assemblies-4au54l4tozj_4d152c2e-ff69-48d7-976e-291db4871f71.jpg?v=1765440749"},{"product_id":"bently-nevada-31000-28-10-00-020-03-02-english-proximity-probe-housing-assembly","title":"Bently Nevada 31000-28-10-00-020-03-02 English Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nThe \u003cstrong\u003e31000-28-10-00-020-03-02\u003c\/strong\u003e is an English proximity probe housing assembly designed for the 3300 XL 8 mm transducer system, featuring a connector protector and a 1.0 m probe cable. This assembly allows for the external mounting of proximity probes through the machine case, facilitating maintenance access for gap adjustment or probe replacement without requiring machine disassembly. The housing is constructed from high-strength, corrosion-resistant polyphenylene sulfide (PPS) and incorporates stainless steel components to ensure environmental and mechanical protection for the installed transducer.\n\nThis specific configuration includes a 2.0 inch (Option 020) probe penetration depth and is configured with two plugs and one M20 fitting (Option 03) for cable sealing, utilizing a 3\/4-14 NPT mounting thread. The assembly adheres to the American Petroleum Institute (API) 670 standard for externally mounted proximity probe housings, making it a suitable choice for radial vibration and Keyphasor measurement applications in critical rotating machinery environments.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated 3300 XL 8 mm proximity probe with connector protector (Option 28)\u003c\/li\u003e\n\u003cli\u003e1.0 m probe cable length (Option 10)\u003c\/li\u003e\n\u003cli\u003e2.0 inch probe penetration depth (Option 020)\u003c\/li\u003e\n\u003cli\u003ePolyphenylene sulfide (PPS) housing material for superior corrosion resistance\u003c\/li\u003e\n\u003cli\u003eConfigured with two plugs and one M20 fitting for cable sealing (Option 03)\u003c\/li\u003e\n\u003cli\u003e3\/4-14 NPT mounting thread (Option 02)\u003c\/li\u003e\n\u003cli\u003eExternal access design reduces downtime for probe adjustments or replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration monitoring on rotating machinery\u003c\/li\u003e\n\u003cli\u003eKeyphasor measurement for phase reference\u003c\/li\u003e\n\u003cli\u003eApplications requiring API 670 compliant external housing\u003c\/li\u003e\n\u003cli\u003eIndustrial environments including oil and gas, power generation, and petrochemical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-10-00-020-03-02\u003c\/td\u003e\n\u003ctd\u003eEnglish Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, with connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration Option\u003c\/td\u003e\n\u003ctd\u003e020\u003c\/td\u003e\n\u003ctd\u003e2.0 in penetration depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eTwo plugs, one M20 fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-10-00-020-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene Sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Penetration\u003c\/td\u003e\n\u003ctd\u003e2.0 in (50.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConduit\/Cable Fittings\u003c\/td\u003e\n\u003ctd\u003eTwo plugs, one M20 fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approval\u003c\/td\u003e\n\u003ctd\u003eAPI 670 Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the outer sleeve into the machine case before mounting the housing.\u003c\/li\u003e\n\u003cli\u003eEnsure the housing is configured with correct fittings for your cabling requirements; use provided hole plugs to seal unused ports.\u003c\/li\u003e\n\u003cli\u003eWhen measuring radial vibration, ensure the machine casing is securely affixed to the bearing to maintain an accurate relative vibration signal.\u003c\/li\u003e\n\u003cli\u003eTighten hole plug nuts to 0.5 N-m (5 in-lbs) during installation.\u003c\/li\u003e\n\u003cli\u003eFor penetration depths less than 1.0 inch, counter-bore the machine case if necessary to minimize rear or side view effects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAPI 670 Standard (Externally mounted proximity probe housings)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666568376683,"sku":"31000-28-10-00-020-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-10-00-020-03-02-proximity-probe-housings-l0wge4h2yqw_009cf48d-f8b4-41ce-8a2f-d1f950b57cc7.jpg?v=1765440784"},{"product_id":"bently-nevada-31000-28-10-00-017-00-02-english-proximity-probe-housing-assemblies","title":"Bently Nevada 31000-28-10-00-017-00-02 English Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nThe \u003cstrong\u003e31000-28-10-00-017-00-02\u003c\/strong\u003e is a fully assembled English-style proximity probe housing designed to protect and mount 3300 XL 8 mm proximity probes in industrial machinery. This configuration includes an installed 3300 XL 8 mm probe with a connector protector (Option 28) and a 1.0 m (39 in) probe cable (Option 10). The assembly provides mechanical and environmental protection for the transducer, allowing for external access to the probe and extension cable to perform gap adjustments or replacements without disassembling the machine case.\n\nThis housing assembly is constructed from high-strength polyphenylene sulfide (PPS) and corrosion-resistant stainless steel, complying with API 670 standards for externally mounted proximity probe housings. It is suitable for radial vibration and Keyphasor measurements in heavy machinery. This specific unit features 3\/4-14 NPT mounting threads (Option 02) and is supplied without conduit fittings, utilizing two plugs and two washers for the housing base openings (Option 00).\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3300 XL 8 mm probe included (Option 28) with integrated connector protector\u003c\/li\u003e\n\u003cli\u003e1.0 m (39 in) probe cable length (Option 10)\u003c\/li\u003e\n\u003cli\u003e3\/4-14 NPT mounting thread (Option 02) for robust machine case installation\u003c\/li\u003e\n\u003cli\u003ePolyphenylene sulfide (PPS) housing material for chemical and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eDesigned for external probe access to simplify gap adjustment and maintenance\u003c\/li\u003e\n\u003cli\u003eIncludes two plugs and two washers (Option 00) for unused conduit openings\u003c\/li\u003e\n\u003cli\u003eAPI 670 compliant design for external mount proximity probe housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration monitoring in rotating machinery\u003c\/li\u003e\n\u003cli\u003eKeyphasor measurements\u003c\/li\u003e\n\u003cli\u003eRefineries and petrochemical processing equipment\u003c\/li\u003e\n\u003cli\u003ePower generation plants and heavy industrial turbines\u003c\/li\u003e\n\u003cli\u003eIntrinsically safe hazardous area environments (when used with appropriate I.S. barriers and transducer systems)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-10-00-017-00-02\u003c\/td\u003e\n\u003ctd\u003eProximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, with connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e017\u003c\/td\u003e\n\u003ctd\u003ePer datasheet specification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eWithout fittings; two plugs and two washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings\u003c\/td\u003e\n\u003ctd\u003eNone (two plugs, two washers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the outer sleeve into the machine case before mounting the housing.\u003c\/li\u003e\n\u003cli\u003eAdjust the probe gap according to the requirements of the 3300 XL transducer system before final securing.\u003c\/li\u003e\n\u003cli\u003eEnsure the housing cover is tightened with the captive screws after installation.\u003c\/li\u003e\n\u003cli\u003eIf utilizing the housing base openings for conduit or cable glands, remove the provided plugs and install fittings as required. Tighten all plug nuts to 0.5 N-m (5 in-lbs).\u003c\/li\u003e\n\u003cli\u003eFor applications with long probe sleeves (greater than 305 mm \/ 12 in), utilize additional sleeve support to prevent resonance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666569425259,"sku":"31000-28-10-00-017-00-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-10-00-017-00-02-proximity-probe-housing-oq0vwwvv2yl_a4516e21-43a7-4b6f-9b51-5bc1bc3f11aa.jpg?v=1765440810"},{"product_id":"bently-nevada-21000-28-05-35-020-04-02-proximity-probe-housing-assemblies","title":"Bently Nevada 21000-28-05-35-020-04-02 Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e21000-28-05-35-020-04-02\u003c\/strong\u003e is a Bently Nevada proximity probe housing assembly engineered for the secure mounting and environmental protection of \u003cstrong\u003e3300 XL 8 mm proximity probes\u003c\/strong\u003e. This configuration integrates a 0.5 m cable length (Option 05), a 3.5 in standoff adapter (Option 35), and 2.0 in of probe penetration depth (Option 020). It includes a 3\/4-14 NPT plug for the fitting interface (Option 04) and utilizes a 3\/4-14 NPT mounting thread (Option 02) to ensure rigid installation on industrial machinery.\u003c\/p\u003e\n\n\u003cp\u003eThis assembly serves as an essential component for critical machinery monitoring, providing the necessary mechanical support and sealing required to maintain accurate shaft vibration and axial position measurements. The housing features an aluminum body with a 304 stainless steel sleeve to withstand demanding operating environments.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProbe Mounting (Option 28): Compatible with 3300 XL 8 mm proximity probes, including selectable hazardous area approvals.\u003c\/li\u003e\n\u003cli\u003eProbe Cable Length (Option 05): Configured for 0.5 m (20 in) probe lead.\u003c\/li\u003e\n\u003cli\u003eStandoff Adapter (Option 35): Provides a 3.5 in standoff length for specific installation clearances.\u003c\/li\u003e\n\u003cli\u003eProbe Penetration (Option 020): Set for 2.0 in of probe penetration into the machine case.\u003c\/li\u003e\n\u003cli\u003eFittings (Option 04): Includes one 3\/4-14 NPT plug.\u003c\/li\u003e\n\u003cli\u003eMounting Thread (Option 02): 3\/4-14 NPT thread for standard housing installation.\u003c\/li\u003e\n\u003cli\u003eConstruction: Durable aluminum body with 304 stainless steel sleeve for reliable performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIndustrial rotating machinery protection\u003c\/li\u003e\n\u003cli\u003eSteam and gas turbines\u003c\/li\u003e\n\u003cli\u003eCentrifugal compressors and pumps\u003c\/li\u003e\n\u003cli\u003eFans and blowers\u003c\/li\u003e\n\u003cli\u003eShaft vibration and axial position measurement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e21000-28-05-35-020-04-02\u003c\/td\u003e\n\u003ctd\u003e21000 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, selectable hazardous area approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e3.5 in (89 mm) length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e020\u003c\/td\u003e\n\u003ctd\u003e2.0 in (50.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e04\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003e21000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum body with 304 stainless steel sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure that the probe penetration depth is adjusted according to the specific clearance requirements of the monitored machinery. For penetration lengths exceeding 300 mm (12 in), additional sleeve support is required to prevent resonance. Use the provided conduit and cable fittings to maintain the integrity of the housing environment. Always follow the installation instructions detailed in the 3300 XL Proximity Transducer System user guides when integrating this housing assembly with your monitoring chain.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666573816171,"sku":"21000-28-05-35-020-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-28-05-35-020-04-02-proximity-probe-housing-assemblies-pkppmcztdaf_9f4ba7e8-c140-4e43-a053-d32a9fd013e0.jpg?v=1765440881"},{"product_id":"bently-nevada-31000-28-10-00-146-00-02-english-proximity-probe-housing-assembly","title":"Bently Nevada 31000-28-10-00-146-00-02 English Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e31000-28-10-00-146-00-02\u003c\/strong\u003e is an English proximity probe housing assembly designed for 3300 XL 8 mm proximity probes. This configuration includes a connector protector (Option 28), a 1.0 meter probe cable (Option 10), and features 3\/4-14 NPT mounting threads (Option 02). The housing is constructed from polyphenylene sulfide (PPS), a high-strength thermoplastic offering superior corrosion resistance for demanding machinery monitoring environments.\u003c\/p\u003e\n\u003cp\u003eUsed to mount proximity probes through machine cases, this assembly enables external access for gap adjustments or probe replacement without the need to disassemble the machinery. It provides essential mechanical and environmental protection for the transducer system. The unit is fully compliant with API 670 standards for externally mounted proximity probe housings and is suitable for use in intrinsically safe hazardous area applications when paired with appropriate I.S. barriers and transducer systems.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 3300 XL 8 mm proximity probe compatibility with connector protector\u003c\/li\u003e\n\u003cli\u003eHousing material: High-strength, corrosion-resistant polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003eAssembly components: Corrosion-resistant stainless steel\u003c\/li\u003e\n\u003cli\u003eMounting interface: 3\/4-14 NPT threads\u003c\/li\u003e\n\u003cli\u003eFittings configuration: Without fittings (includes two plugs and two washers)\u003c\/li\u003e\n\u003cli\u003eAPI 670 compliant for externally mounted probe housings\u003c\/li\u003e\n\u003cli\u003eProvides external access to probe and extension cable for maintenance and gap adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eThe 31000 housing assembly is used in heavy-industry applications requiring radial vibration or axial position measurements, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower generation equipment\u003c\/li\u003e\n\u003cli\u003eOil and gas processing machinery\u003c\/li\u003e\n\u003cli\u003ePetrochemical rotating equipment\u003c\/li\u003e\n\u003cli\u003eWater and wastewater pumping stations\u003c\/li\u003e\n\u003cli\u003eIndustrial compressors and turbines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-10-00-146-00-02\u003c\/td\u003e\n\u003ctd\u003e31000 English Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, with connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e146\u003c\/td\u003e\n\u003ctd\u003e146 mm probe penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eWithout fittings; two plugs and two washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT (Required if ordering Standoff Adapter Option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-10-00-146-00-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS) housing; stainless steel components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental Protection\u003c\/td\u003e\n\u003ctd\u003eMechanical and environmental protection for probes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 Celsius to +177 Celsius\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670 Standard compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eInstallation must be performed by qualified personnel. The housing is installed into the machine case, followed by the insertion of the probe sleeve to adjust the probe gap. After setting the gap, the housing is fitted over the outer sleeve and secured with a retainer and retaining nut. Ensure that all conduit fittings are tightened according to specification. For unused holes, use the provided hole plugs and tighten nuts to 0.5 N-m (5 in-lbs). The 31000 housing is not an explosion-proof housing; use caution in hazardous area applications.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eThis housing assembly is fully compliant with the American Petroleum Institute (API) 670 Standard for externally mounted proximity probe housings. It is suitable for use in intrinsically safe hazardous area applications when installed in conjunction with an approved transducer system and appropriate I.S. barriers.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666574504299,"sku":"31000-28-10-00-146-00-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-10-00-146-00-02-proximitor-sensor-kub5bhwaeg4_41e97cbe-b630-4766-8c6d-05fa0f6efaf1.jpg?v=1765440890"},{"product_id":"bently-nevada-21000-33-10-00-087-04-02-proximity-probe-housing-assembly","title":"Bently Nevada 21000-33-10-00-087-04-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\n\u003cstrong\u003e21000-33-10-00-087-04-02\u003c\/strong\u003e is an aluminum proximity probe housing assembly configured for \u003cstrong\u003e3300 XL NSv\u003c\/strong\u003e proximity transducer systems. This assembly features an 8.7 inch probe penetration length (Option D: 087), a 1.0 m probe cable (Option B: 10), and a 3\/4-14 NPT mounting thread (Option F: 02). The unit provides a robust, externally mounted housing solution for critical machinery vibration and axial position monitoring in industrial environments, complying with API 670 standards.\n\nThis configuration includes a connector protector for the 3300 XL NSv probe, ensuring cable integrity and protecting the connection point from contaminants. The assembly is supplied with a single 3\/4-14 NPT plug (Option E: 04) for conduit port closure. As a standard 21000 series housing, it utilizes an aluminum body construction suitable for diverse, non-corrosive industrial applications.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e3300 XL NSv probe integration with connector protector\u003c\/li\u003e\n\u003cli\u003eAluminum body construction for lightweight, durable mounting\u003c\/li\u003e\n\u003cli\u003e1.0 m (39 in) probe cable length\u003c\/li\u003e\n\u003cli\u003e8.7 in (221 mm) probe penetration depth\u003c\/li\u003e\n\u003cli\u003e3\/4-14 NPT mounting thread for standard industrial interfaces\u003c\/li\u003e\n\u003cli\u003eSingle 3\/4-14 NPT plug included for conduit entry sealing\u003c\/li\u003e\n\u003cli\u003eCompliant with API 670 Standard for externally mounted housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eShaft vibration and axial position monitoring on critical rotating machinery\u003c\/li\u003e\n\u003cli\u003eHydrocarbon and chemical processing environments\u003c\/li\u003e\n\u003cli\u003ePower generation equipment (turbines, compressors, pumps)\u003c\/li\u003e\n\u003cli\u003eHazardous area monitoring (where CSA certified configuration allows)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e21000-33-10-00-087-04-02\u003c\/td\u003e\n\u003ctd\u003e21000 Aluminum Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe\u003c\/td\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003ctd\u003e3300 XL NSv probe with connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Penetration\u003c\/td\u003e\n\u003ctd\u003e087\u003c\/td\u003e\n\u003ctd\u003e8.7 in (221 mm) probe penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e04\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT plug only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e21000-33-10-00-087-04-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Material\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSleeve Material\u003c\/td\u003e\n\u003ctd\u003e304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.1 kg (2.4 lb) typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL NSv\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePenetration Depth\u003c\/td\u003e\n\u003ctd\u003e8.7 in (221 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-34 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eRoHS Directive 2011\/65\/EU\u003c\/li\u003e\n\u003cli\u003eAPI 670 Standard compliant\u003c\/li\u003e\n\u003cli\u003eCSA Type 4 enclosure rating (for CA-version housings and approved configurations)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666576273771,"sku":"21000-33-10-00-087-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-33-10-00-087-04-02-proximity-probe-housingassemblies-pcbcjlmjuth_c14fdfd4-8647-4aa3-9a6b-785dd1b6bfc5.jpg?v=1765440907"},{"product_id":"bently-nevada-31000-16-05-00-65-03-02-english-proximity-probe-housing-assemblies","title":"Bently Nevada 31000-16-05-00-65-03-02 English Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nThe \u003cstrong\u003e31000-16-05-00-65-03-02\u003c\/strong\u003e is a robust proximity probe housing assembly designed for the 3300 XL 8 mm transducer system, featuring a 0.5 m probe cable, 65 mm probe penetration, and 3\/4-14 NPT mounting threads. This assembly provides an integrated solution for mounting proximity probes through machine cases, enabling external access for gap adjustments or probe replacement without requiring machine disassembly. Constructed from polyphenylene sulfide (PPS) for chemical and mechanical resistance, this unit ensures reliable operation in demanding industrial environments such as power generation and rotating machinery monitoring.\n\nThis specific configuration includes Option 03 fittings, which provide two plugs, one M20 fitting, and a cable seal grip with grommets, making it suitable for installations requiring armored cable protection. The assembly meets API 670 standards for externally mounted proximity probe housings, ensuring compatibility with industry-standard machinery protection systems when paired with approved transducer chains.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated 3300 XL 8 mm proximity probe (Option 16)\u003c\/li\u003e\n\u003cli\u003e0.5 m probe cable length (Option 05)\u003c\/li\u003e\n\u003cli\u003e65 mm probe penetration depth (Option 65)\u003c\/li\u003e\n\u003cli\u003eFittings package (Option 03) including M20 fitting and cable seal grip with grommets for armored cables\u003c\/li\u003e\n\u003cli\u003e3\/4-14 NPT mounting thread (Option 02)\u003c\/li\u003e\n\u003cli\u003ePolyphenylene sulfide (PPS) housing construction for superior corrosion resistance\u003c\/li\u003e\n\u003cli\u003eAPI 670 compliant design for mechanical and environmental protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration measurement on rotating machinery\u003c\/li\u003e\n\u003cli\u003eKeyphasor measurements\u003c\/li\u003e\n\u003cli\u003eExternal probe mounting for hazardous or restricted access areas\u003c\/li\u003e\n\u003cli\u003eApplications requiring armored cable entry and environmental sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-16-05-00-65-03-02\u003c\/td\u003e\n\u003ctd\u003e31000 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e065\u003c\/td\u003e\n\u003ctd\u003e65 mm length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eTwo plugs, one M20 fitting, one cable seal grip with grommets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e31000 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable Length\u003c\/td\u003e\n\u003ctd\u003e0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Penetration\u003c\/td\u003e\n\u003ctd\u003e65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings\u003c\/td\u003e\n\u003ctd\u003eTwo plugs, one M20 fitting, one cable seal grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670 Standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the outer sleeve into the machine case according to standard API 670 requirements.\u003c\/li\u003e\n\u003cli\u003eInsert the probe sleeve and adjust the probe gap to the specified distance for the 3300 XL transducer system.\u003c\/li\u003e\n\u003cli\u003eEnsure the housing cover is tightened to the specified torque for environmental sealing.\u003c\/li\u003e\n\u003cli\u003eUse appropriate hole plugs to seal any unused ports in the housing base.\u003c\/li\u003e\n\u003cli\u003eConsult the 31000\/32000 User Guide (124200) for detailed procedures regarding probe gap adjustment and hazardous area installation protocols.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAPI 670 Standard compliant\u003c\/li\u003e\n\u003cli\u003eRoHS compliant construction materials\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666577191275,"sku":"31000-16-05-00-65-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-16-05-00-65-03-02-proximity-probe-housing-xjgb1fyvowy_877cdf1a-5ac5-422e-a677-2d5a26cb1b57.jpg?v=1765440918"},{"product_id":"bently-nevada-21000-28-05-20-044-04-02-proximity-probe-housing-assemblies","title":"Bently Nevada 21000-28-05-20-044-04-02 Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nThe \u003cstrong\u003e21000-28-05-20-044-04-02\u003c\/strong\u003e is a 21000-series proximity probe housing assembly designed for the industrial mounting of eddy-current proximity transducers. This assembly provides the necessary mechanical interface between the proximity probe and the machine casing, protecting the transducer while ensuring consistent alignment with the measured shaft or target.\n\nThe housing assembly integrates multiple configuration options to accommodate specific installation requirements, including probe thread size, mounting orientation, and conduit connection types. This unit is constructed for use in industrial environments requiring environmental protection for the probe lead and connector, effectively isolating the sensor from potential contaminants or moisture within the machine housing.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 21000-series transducer integration\u003c\/li\u003e\n\u003cli\u003eStainless steel construction for environmental resistance\u003c\/li\u003e\n\u003cli\u003eConfigured with specific probe mounting adapter and conduit interface\u003c\/li\u003e\n\u003cli\u003eEnables precise gap adjustment and locking of the proximity probe\u003c\/li\u003e\n\u003cli\u003eProtects probe connections from mechanical stress and external elements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIndustrial rotating machinery protection systems\u003c\/li\u003e\n\u003cli\u003eSteam and gas turbine vibration monitoring\u003c\/li\u003e\n\u003cli\u003eCompressor and pump axial position and radial vibration measurements\u003c\/li\u003e\n\u003cli\u003eHydroelectric generator shaft monitoring\u003c\/li\u003e\n\u003cli\u003eHigh-temperature or harsh industrial machinery environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e21000-28-05-20-044-04-02\u003c\/td\u003e\n\u003ctd\u003eProximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe Thread\/Adapter\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003eStandard mounting adapter configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Configuration\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003eHousing mounting orientation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Body Style\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003eHousing material and body style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Assembly Length\u003c\/td\u003e\n\u003ctd\u003e044\u003c\/td\u003e\n\u003ctd\u003e04.4 inch assembly length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Seal\/Fitting\u003c\/td\u003e\n\u003ctd\u003e04\u003c\/td\u003e\n\u003ctd\u003eStandard conduit fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Connector\/Options\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eStandard assembly option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e21000-28-05-20-044-04-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly Type\u003c\/td\u003e\n\u003ctd\u003eProximity Probe Housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eStandard Bently Nevada Proximity Probes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the housing is mounted perpendicular to the target surface for accurate displacement measurement.\u003c\/li\u003e\n\u003cli\u003eUtilize proper thread sealant on conduit fittings to maintain environmental integrity.\u003c\/li\u003e\n\u003cli\u003eCheck that the probe gap is set according to the transducer datasheet requirements after the housing is secured.\u003c\/li\u003e\n\u003cli\u003eEnsure the housing lock nut is tightened firmly to prevent vibration-induced loosening during machine operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCE marked for relevant industrial directives\u003c\/li\u003e\n\u003cli\u003eRoHS compliant construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666577420651,"sku":"21000-28-05-20-044-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-28-05-20-044-04-02-3300-nsv-proximity-probes-apo00iiec5u_b3a4d321-5dfc-4b8f-8421-83b247611947.jpg?v=1765440923"},{"product_id":"bently-nevada-31000-16-10-00-050-03-02-english-proximity-probe-housing-assembly","title":"Bently Nevada 31000-16-10-00-050-03-02 English Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nThe \u003cstrong\u003e31000-16-10-00-050-03-02\u003c\/strong\u003e is an English Proximity Probe Housing Assembly designed to provide robust mechanical and environmental protection for proximity probes and extension cables. This configuration includes a 3300 XL 8 mm proximity probe (Option 16), a 1.0 m probe cable length (Option 10), and is configured with two fittings (Option 03) and a 3\/4-14 NPT mounting thread (Option 02). The housing is constructed from polyphenylene sulfide (PPS), a high-strength thermoplastic known for its excellent corrosion resistance, complemented by corrosion-resistant stainless steel components.\n\nThis housing assembly facilitates external access to the probe system, allowing for gap adjustments or probe replacement without requiring the disassembly of the machine case. It is fully compliant with API 670 standards for externally mounted proximity probe housings. When paired with an approved transducer system and appropriate safety barriers, this assembly is suitable for use in intrinsically safe hazardous area applications.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing Material: Polyphenylene sulfide (PPS) and corrosion-resistant stainless steel\u003c\/li\u003e\n\u003cli\u003eConfiguration: Includes 3300 XL 8 mm proximity probe (Option 16) and 1.0 m cable (Option 10)\u003c\/li\u003e\n\u003cli\u003eMounting Thread: 3\/4-14 NPT (Option 02)\u003c\/li\u003e\n\u003cli\u003eFittings: Two fittings (Option 03)\u003c\/li\u003e\n\u003cli\u003eCompliance: Fully compliant with API 670 standards\u003c\/li\u003e\n\u003cli\u003eProtection: Provides mechanical and environmental protection for radial vibration and Keyphasor transducer installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\nThe 31000 Proximity Probe Housing Assembly is used in heavy-industry rotating machinery applications, including:\n\u003cul\u003e\n\u003cli\u003eRadial vibration measurement\u003c\/li\u003e\n\u003cli\u003eKeyphasor phase reference measurement\u003c\/li\u003e\n\u003cli\u003eApplications requiring external access to transducer systems\u003c\/li\u003e\n\u003cli\u003eHazardous area environments (when used with approved systems and barriers)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-16-10-00-050-03-02\u003c\/td\u003e\n\u003ctd\u003e31000 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration Option\u003c\/td\u003e\n\u003ctd\u003e050\u003c\/td\u003e\n\u003ctd\u003e50 mm (1.97 in) penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eTwo 3\/4-14 NPT fittings, one plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread Option\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-16-10-00-050-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS), Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards Compliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAPI 670 Standard compliant\u003c\/li\u003e\n\u003cli\u003eIntrinsically safe capable (when used with approved transducer systems and I.S. barriers)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666577617259,"sku":"31000-16-10-00-050-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-16-10-00-050-03-02-proximity-probe-housingassemblies-aq1fua151qd_e1177ecc-dc7b-459c-b6ed-b76982cd8cf7.jpg?v=1765440928"},{"product_id":"bently-nevada-21000-28-05-00-041-03-02-21000-proximity-probe-housing-assembly","title":"Bently Nevada 21000-28-05-00-041-03-02 21000 Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eSafe and reliable containment for proximity transducers is critical in heavy machinery monitoring, which is where the \u003cstrong\u003eBently Nevada 21000-28-05-00-041-03-02\u003c\/strong\u003e proximity probe housing assembly excels. Designed as part of the rugged \u003cstrong\u003e21000 series\u003c\/strong\u003e, this industrial-grade housing provides an exceptionally robust, weatherproof enclosure that protects proximity probes (such as the 3300 XL series) from harsh, high-exposure environments. It is engineered to facilitate easy external adjustment and replacement of the probe without requiring a machinery shutdown, reducing downtime during routine maintenance.\u003c\/p\u003e\n\n\u003cp\u003eThis housing assembly is constructed from high-quality, copper-free aluminum with a protective epoxy coating to withstand corrosive atmospheres typical in heavy industrial processing. It features precise mechanical threads, an adjustable sleeve for exact probe positioning, and dedicated conduit ports to protect signal cables from mechanical damage, moisture, and chemical exposure.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRobust Mechanical Protection:\u003c\/strong\u003e Cast from copper-free aluminum with an epoxy finish to prevent corrosion in marine, petrochemical, and industrial environments.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExternal Adjustability:\u003c\/strong\u003e Allows maintenance technicians to adjust probe gap settings and penetration depths externally while machinery is running.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnvironmental Sealing:\u003c\/strong\u003e High-integrity O-ring seals provide NEMA 4X and IP66 level protection against water ingress and particulate contamination.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad Compatibility:\u003c\/strong\u003e Standardized internal dimensions accommodate Bently Nevada 3300 and 3300 XL 8mm proximity probe systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConduit Integration:\u003c\/strong\u003e Integral conduit connection ports simplify field wiring routing and shield transducer extension cables from physical strain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePower generation steam and gas turbine shaft relative vibration monitoring.\u003c\/li\u003e\n  \u003cli\u003eOil and gas centrifugal compressor and expander shaft displacement measurement.\u003c\/li\u003e\n  \u003cli\u003ePetrochemical high-speed pump, gearbox, and blower monitoring systems.\u003c\/li\u003e\n  \u003cli\u003eHeavy industrial machinery requiring continuous machinery protection and Turbine Supervisory Instrumentation (TSI).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003eManufacturer\u003c\/strong\u003e\n      \u003ctd\u003eBently Nevada\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003ePart Number\/Model\u003c\/strong\u003e\n      \u003ctd\u003e21000-28-05-00-041-03-02\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003eProduct Type\u003c\/strong\u003e\n      \u003ctd\u003eProximity Probe Housing Assembly\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003eHousing Material\u003c\/strong\u003e\n      \u003ctd\u003eCopper-free aluminum with epoxy paint coating\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003eEnvironmental Rating\u003c\/strong\u003e\n      \u003ctd\u003eNEMA 4X \/ IP66\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e\n      \u003ctd\u003e-40 degC to +100 degC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003eCompatible Transducers\u003c\/strong\u003e\n      \u003ctd\u003eBently Nevada 3300 and 3300 XL 8mm proximity probes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003eInstallation Access\u003c\/strong\u003e\n      \u003ctd\u003eExternal adjustment sleeve\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eTo ensure optimal performance and long-term environmental sealing, follow these key installation steps:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Thread the housing body securely into the machine casing port. Apply appropriate thread sealant to prevent process fluid leaks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProbe Positioning:\u003c\/strong\u003e Insert the proximity probe into the sleeve, adjust to the correct gap\/voltage using a digital voltmeter (DVM) connected to the proximitor sensor, and tighten the locknut to the recommended torque specifications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConduit Connection:\u003c\/strong\u003e Route the probe extension cable through the dedicated conduit fittings. Ensure all conduit joints are sealed to prevent internal moisture accumulation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Ensure the housing assembly is properly bonded to the machinery ground to prevent electromagnetic interference from degrading the vibration signal.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666615693675,"sku":"21000-28-05-00-041-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-28-05-00-041-03-02-proximity-probehousing-assemblies-cpvdojhbxcg_722c8ada-1f30-4bbf-af32-28009e2cfda4.jpg?v=1765444193"},{"product_id":"bently-nevada-21000-28-10-000-102-03-02-proximity-probe-housing-assemblies","title":"Bently Nevada 21000-28-10-000-102-03-02 Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e21000-28-10-000-102-03-02\u003c\/strong\u003e is an all-metal, externally mounted proximity probe housing assembly engineered by Bently Nevada for industrial machinery protection systems. Constructed with a robust aluminum body and a durable 304 stainless steel sleeve, this assembly provides secure, external access to proximity probes and their corresponding extension cables. It features a dome cover that screws firmly into the housing body, integrated threaded ports for conduit connections, internal O-rings, and a reliable thread seal. This specific deployment integrates a \u003cstrong\u003e3300 XL 8mm probe\u003c\/strong\u003e configured with \u003cstrong\u003eselectable hazardous area approvals\u003c\/strong\u003e to supply precise eddy-current sensor inputs. The entire assembly is purpose-built to comply with the stringent American Petroleum Institute (API) 670 Standard for externally mounted sensor systems, ensuring uninterrupted monitoring of vital parameters like shaft vibration and position across heavy industrial machinery.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal accessibility permits gap adjustment and full probe replacement without requiring complex disassembly of the machine case.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty aluminum body paired with a 304 stainless steel sleeve delivers exceptional mechanical integrity in harsh plant settings.\u003c\/li\u003e\n\u003cli\u003eFully compliant with the American Petroleum Institute (API) 670 Standard for externally mounted proximity probe housings.\u003c\/li\u003e\n\u003cli\u003eComplete structural assembly including a screw-in dome cover, threaded conduit ports, dual O-rings, and dedicated thread seals.\u003c\/li\u003e\n\u003cli\u003eEngineered mounting thread with 5 to 7 full threads to significantly increase structural installation strength and overall stiffness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal vibration and position monitoring on gas and steam turbines\u003c\/li\u003e\n\u003cli\u003eHydrocarbon processing and petroleum refinery rotating equipment protection\u003c\/li\u003e\n\u003cli\u003eCentrifugal compressor and high-pressure pump shaft observation\u003c\/li\u003e\n\u003cli\u003eLarge industrial electric motor and generator bearing path monitoring\u003c\/li\u003e\n\u003cli\u003eHeavy-duty fans and blower monitoring in power generation plants\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eOption Code Definition\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSuffix Code\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSelected Configuration Description\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eA: Probe with Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8mm probe, selectable hazardous area approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eB: Probe Cable Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eC: Standoff Adapter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e000\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter (0.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD: Probe Penetration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e102\u003c\/td\u003e\n\u003ctd\u003e10.2 in probe penetration length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eE: Fittings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT plug; one 3\/4-14 to 1\/2-14 NPT reducer; one cable seal grip with grommets for cable sizes: 1\/8 to 3\/16, 1\/4 to 5\/16, and 5\/16 to 3\/8-in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eF: Mounting Thread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT (machined with 5 - 7 full threads for increased strength)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter \/ Category\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHousing Body Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSleeve Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e304 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIntegrated Transducer Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8mm Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProbe Operating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC (-60 degF to +351 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProbe Storage Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC (-60 degF to +351 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNominal Penetration (Option D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10.2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePenetration Adjustment Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13 mm (+\/- 0.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Rating Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCertified as a CSA Type 4 Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical Mass (Weight)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.1 kg (2.4 lb) typical, without fittings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eConnections\/Interfaces\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eComponent \/ Interface\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3\/4-14 NPT Threaded Ports\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal conduit connection interfaces to pass extension cables through safely.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOption E:03 Fittings Kit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eProvides one 3\/4-14 NPT plug, one NPT reducer, and an active cable seal grip with selectable sizing grommets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOption F:02 Mounting Thread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eProvides 3\/4-14 NPT machine connection utilizing 5 to 7 full threads to maximize installation stiffness.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSleeve Inspection:\u003c\/strong\u003e Before finalizing installation, verify that the total sleeve length does not introduce mechanical stress. Sleeve lengths longer than 304 mm (12 inches) demand secondary sleeve support to mitigate excessive vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetration Range:\u003c\/strong\u003e Utilize the dynamic adjustment range of Option D, which provides 13 mm (+\/- 0.5 in) of axial travel to accurately establish target distance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Counterboring:\u003c\/strong\u003e For probe penetration lengths designed between 1.0 and 2.0 inches, consider a local counterbore in the machine housing to minimize unwanted side-view or rear-view proximity interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Management:\u003c\/strong\u003e Carefully dress the inner probe cable during enclosure closure. Avoid excessive cable loops within the main housing body to completely eliminate any damage when screwing the primary dome cover back into position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Protection:\u003c\/strong\u003e Ensure all associated O-rings and structural thread seals are correctly aligned and uncompromised during field installation to maintain structural Type 4 sealing capability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoHS:\u003c\/strong\u003e Complies with European Community Directive: ROHS Directive 2011\/65\/EU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Standards:\u003c\/strong\u003e Fully compliant with the American Petroleum Institute's (API) 670 Standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Security:\u003c\/strong\u003e Certified as a CSA Type 4 enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666617889131,"sku":"21000-28-10-000-102-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-28-10-000-102-03-02-proximity-probe-housingassemblies-zfy1bcojh00_3fc8e123-fc9f-4e34-a818-cc4eb44a4555.jpg?v=1765444219"},{"product_id":"bently-nevada-31000-16-10-00-162-00-02-english-proximity-probe-housing-assemblies","title":"Bently Nevada 31000-16-10-00-162-00-02 English Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nThe \u003cstrong\u003e31000-16-10-00-162-00-02\u003c\/strong\u003e is a 31000-series English Proximity Probe Housing Assembly designed for external mounting of proximity probes on industrial machinery. This configuration includes a 3300 XL 8 mm probe (Option 16) with a 1.0 m probe cable (Option 10), no standoff adapter (Option 00), a probe penetration depth of 162 mm (Option 162), no fittings (Option 00), and no outer sleeve, retainer, or retaining nut (Option 02).\n\nThis housing assembly provides robust mechanical and environmental protection for proximity transducers used in vibration and Keyphasor measurements. The 31000 series is constructed from polyphenylene sulfide (PPS), a high-strength thermoplastic known for its corrosion resistance, while internal components utilize stainless steel. This system allows for external access to the proximity probe and its extension cable, enabling gap adjustments or probe replacements without the need for machine case disassembly. It is fully compliant with the American Petroleum Institute (API) 670 standard for externally mounted proximity probe housings.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 16:\u003c\/strong\u003e Integrated 3300 XL 8 mm proximity probe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 10:\u003c\/strong\u003e 1.0 m probe cable length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 162:\u003c\/strong\u003e 162 mm probe penetration depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 02:\u003c\/strong\u003e 3\/4-14 NPT mounting thread\u003c\/li\u003e\n\u003cli\u003ePPS thermoplastic body construction with corrosion-resistant stainless steel components\u003c\/li\u003e\n\u003cli\u003eAPI 670 compliant design for external proximity probe housing\u003c\/li\u003e\n\u003cli\u003eEnables external access for gap adjustment and maintenance\u003c\/li\u003e\n\u003cli\u003eSupports intrinsically safe operation when used with approved transducer systems and I.S. barriers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration monitoring on rotating machinery\u003c\/li\u003e\n\u003cli\u003eKeyphasor signal acquisition\u003c\/li\u003e\n\u003cli\u003eHeavy industrial applications including power generation, oil and gas, and petrochemical processing\u003c\/li\u003e\n\u003cli\u003eEquipment where external access for probe maintenance is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-16-10-00-162-00-02\u003c\/td\u003e\n\u003ctd\u003e31000 English Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e162\u003c\/td\u003e\n\u003ctd\u003e162 mm penetration length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eWithout fittings; two plugs and two washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-16-10-00-162-00-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Components\u003c\/td\u003e\n\u003ctd\u003eCorrosion-resistant stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC (probe specific)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the machine casing is affixed directly to the bearing housing for accurate relative vibration measurements.\u003c\/li\u003e\n\u003cli\u003eThe housing is intended for mechanical and environmental protection; it is not explosion-proof. For explosion-proof requirements, consult dedicated housing series.\u003c\/li\u003e\n\u003cli\u003eEnsure conduit fittings are used if hardline conduit or metal tubing is brought into the housing.\u003c\/li\u003e\n\u003cli\u003eUse appropriate thread sealant compatible with the 3\/4-14 NPT mounting thread during installation into the machine case.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666620412267,"sku":"31000-16-10-00-162-00-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-16-10-00-162-00-02-proximity-probe-housingassemblies-zto34c0x0af_a4b3d570-da1b-4226-aa21-2f02b304fdef.jpg?v=1765444250"},{"product_id":"bently-nevada-21000-00-00-00-110-04-02-proximity-probe-housing-assemblies","title":"Bently Nevada 21000-00-00-00-110-04-02 Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e21000-00-00-00-110-04-02\u003c\/strong\u003e is an aluminum proximity probe housing assembly designed for the external mounting of eddy-current proximity probes. This specific configuration features no included probe (Option 00), no probe cable (Option 00), and no standoff adapter (Option 00), with a probe penetration depth of 11.0 inches (Option 110). It is equipped with one 3\/4-14 NPT plug (Option 04) and a 3\/4-14 NPT mounting thread (Option 02).\u003c\/p\u003e\n\n\u003cp\u003eThis assembly provides a protective environment for probes, ensuring they are shielded from industrial hazards while maintaining accurate proximity measurement alignment. It adheres to the American Petroleum Institute (API) 670 standard for externally mounted proximity probe housings, making it a reliable choice for monitoring axial position and shaft vibration in rotating machinery such as turbines, compressors, and pumps.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum body construction with 304 stainless steel sleeve for environmental resistance\u003c\/li\u003e\n\u003cli\u003e11.0 inch probe penetration depth (Option 110)\u003c\/li\u003e\n\u003cli\u003e3\/4-14 NPT mounting thread configuration (Option 02)\u003c\/li\u003e\n\u003cli\u003eFitted with one 3\/4-14 NPT plug (Option 04) for unused conduit ports\u003c\/li\u003e\n\u003cli\u003eStandardized design compliant with API 670 requirements\u003c\/li\u003e\n\u003cli\u003eCompatible with Bently Nevada proximity transducer systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower generation equipment (turbines, generators)\u003c\/li\u003e\n\u003cli\u003eOil and gas processing (compressors, pumps)\u003c\/li\u003e\n\u003cli\u003ePetrochemical and industrial rotating machinery\u003c\/li\u003e\n\u003cli\u003eWater and wastewater pumping stations\u003c\/li\u003e\n\u003cli\u003eCritical machinery protection and condition monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e21000-00-00-00-110-04-02\u003c\/td\u003e\n\u003ctd\u003e21000 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eProbe not required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eProbe cable not required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003ctd\u003e11.0 in (279 mm) length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e04\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT plug only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e21000-00-00-00-110-04-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum body with 304 stainless steel sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Penetration\u003c\/td\u003e\n\u003ctd\u003e11.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Type\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.1 kg (2.4 lb) typical (without fittings)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the housing is mounted securely to the machine case to minimize vibration effects on the probe.\u003c\/li\u003e\n\u003cli\u003eUse appropriate thread sealant on NPT connections to maintain pressure integrity.\u003c\/li\u003e\n\u003cli\u003eVerify the probe gap and penetration depth during installation to ensure the probe tip is positioned correctly relative to the target surface.\u003c\/li\u003e\n\u003cli\u003eFor installations involving conduit, ensure fittings are tightened to manufacturer specifications to prevent moisture ingress.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666621329771,"sku":"21000-00-00-00-110-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-00-00-00-110-04-02-proximity-probehousing-assemblies-ziapdi2z3vn_97e2dc2f-7cbf-4f27-a177-f7e6c6a11dcb.jpg?v=1765444264"},{"product_id":"bently-nevada-31000-16-10-00-153-00-02-english-proximity-probe-housing-assembly","title":"Bently Nevada 31000-16-10-00-153-00-02 English Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e31000-16-10-00-153-00-02\u003c\/strong\u003e is an English proximity probe housing assembly designed for the protection and installation of 3300 XL 8 mm proximity transducers. This specific configuration features a 1.0 m probe cable (Option 10), 15.3 in probe penetration (Option 153), and utilizes a 3\/4-14 NPT mounting thread (Option 02) without standoff adapters or included fittings.\u003c\/p\u003e\n\n\u003cp\u003eEngineered for mechanical and environmental protection in rotating machinery, the 31000 series housing ensures the integrity of the sensing chain while allowing for accurate gap adjustment. This assembly provides a robust mounting point for the probe, shielding the connector and cable assembly from harsh industrial conditions while maintaining the necessary clearances for eddy-current measurement.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3300 XL 8 mm Probe Compatibility:\u003c\/strong\u003e Optimized for standard 3300 XL 8 mm probe integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.0 m Probe Cable:\u003c\/strong\u003e Includes factory-specified 1.0 m probe lead length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Penetration:\u003c\/strong\u003e 15.3 in (389 mm) penetration depth for precise probe positioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 3\/4-14 NPT external mounting thread for secure installation into machine cases.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Protection:\u003c\/strong\u003e Designed to provide environmental sealing for probe components in non-hazardous applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower Generation (Steam\/Gas Turbines)\u003c\/li\u003e\n\u003cli\u003eOil and Gas Processing (Compressors, Pumps)\u003c\/li\u003e\n\u003cli\u003eRotating Machinery Vibration Monitoring\u003c\/li\u003e\n\u003cli\u003eAxial Position and Radial Vibration Measurement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-16-10-00-153-00-02\u003c\/td\u003e\n\u003ctd\u003e31000 English Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e153\u003c\/td\u003e\n\u003ctd\u003e15.3 in penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eWithout fittings; two plugs and two washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-16-10-00-153-00-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePenetration Depth\u003c\/td\u003e\n\u003ctd\u003e15.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings\u003c\/td\u003e\n\u003ctd\u003eNone (includes two plugs and two washers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eInstallation requires inserting the outer sleeve into the machine case, followed by the probe sleeve. After adjusting the probe gap to the required measurement range, reconnect the probe cable and secure the housing over the outer sleeve using the provided retainer and retaining nut. Ensure all unused holes are sealed with the supplied plugs and tightened to 0.5 N-m (5 in-lbs) to maintain environmental protection. This housing is not explosion-proof and is intended for environmental and mechanical protection only.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666622148971,"sku":"31000-16-10-00-153-00-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-16-10-00-153-00-02-proximity-probe-housingassemblies-yg3n2cnz1ae_8dffe5b0-92f8-43f2-abab-538be5f0262f.jpg?v=1765444276"},{"product_id":"bently-nevada-21000-16-10-000-062-03-02-21000-series-proximity-probe-housing-assembly","title":"Bently Nevada 21000-16-10-000-062-03-02 21000 Series Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eOptimizing physical sensor protection in high-velocity rotating machinery, the \u003cstrong\u003eBently Nevada 21000-16-10-000-062-03-02\u003c\/strong\u003e serves as a ruggedized, explosion-proof external enclosure designed for precise positioning of proximity probes. This heavy-duty mechanical assembly permits external adjustments of transducer gap clearances without necessitating machinery shutdown. Constructed from copper-free aluminum, it protects critical 3300 or 3300 XL proximity sensors from aggressive industrial solvents, mechanical hazards, and explosive atmospheric hazards typical of petrochemical and power generation facilities.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cli\u003eExplosion-proof physical housing designed for harsh hazardous environment installations.\u003c\/li\u003e\n  \u003cli\u003eAllows full external adjustments of the sensor's physical gap while the machine remains operational.\u003c\/li\u003e\n  \u003cli\u003eHeavy-wall, copper-free aluminum dome and base with a robust protective finish.\u003c\/li\u003e\n  \u003cli\u003eIntegrated internal sleeve system shielding the transducer cable against physical damage and moisture.\u003c\/li\u003e\n  \u003cli\u003eEquipped with dual conduit entries to isolate electrical cabling from environmental contaminants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cli\u003eSteam, gas, and hydro turbine bearing casing monitoring.\u003c\/li\u003e\n  \u003cli\u003eCentrifugal compressor shaft vibration and axial position displacement measurements.\u003c\/li\u003e\n  \u003cli\u003eLarge-scale industrial pump and cooling fan bearing protection.\u003c\/li\u003e\n  \u003cli\u003eHigh-pressure casing penetrations within oil and gas refining processes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; width: 100%; margin-bottom: 1.5rem;\"\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; color: #2d3748;\"\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold; width: 35%;\"\u003eManufacturer\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003eBently Nevada\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eModel Code\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003e21000-16-10-000-062-03-02\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eHousing Series\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003e21000 (Explosion-proof, Aluminum)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eSleeve Length Option (-062)\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003e6.2 inches (157 mm) sleeve length\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eProbe Option (-16)\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003ePrepared for 3300 XL 8 mm proximity probe\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eProbe Thread Option (-10)\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003e3\/8-24 UNF thread\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eConduit Option (-000)\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003eNo conduit fittings provided\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eO-Ring Option (-03)\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003eViton (FKM) fluorocarbon elastomer\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eProcess Mount Option (-02)\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003e3\/4-14 NPT mounting threads\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eHousing Material\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003eCopper-free aluminum with conversion coating\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eOperating Temperature Range\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003e-40 to +100 degC\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eShipping Weight (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003e2.1 kg (4.6 lbs)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003ePackage Dimensions (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003e280 x 180 x 150 mm\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; width: 100%; margin-bottom: 1.5rem;\"\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; color: #2d3748;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"border-bottom: 2px solid #2b6cb0; text-align: left;\"\u003e\n        \u003cth style=\"padding: 0.75rem; font-weight: bold;\"\u003eInterface Type\u003c\/th\u003e\n        \u003cth style=\"padding: 0.75rem; font-weight: bold;\"\u003eSpecification\/Assignment\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eMachine Mounting Thread\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003e3\/4-14 NPT (Option -02) direct casing interface\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eInternal Probe Fitting\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003e3\/8-24 UNF (Option -10) sleeve threading\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.75rem; font-weight: bold;\"\u003eCable Conduit Ports\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.75rem;\"\u003eDual threaded entries for structural routing and sealing\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eEmpirical Engineering Insights\u003c\/h3\u003e\n\u003ch4 style=\"color: #1a365d; margin-top: 1rem; margin-bottom: 0.5rem;\"\u003eAlternative Models \u0026amp; Compatibility\u003c\/h4\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eThe 21000 Series aluminum housing is designed to shield standard English thread proximity systems. If physical installations demand high corrosion resistance (such as marine environments or sour gas processes), transition to the 24701 Stainless Steel housing assembly. Ensure that your probe sleeve length option matches actual target shaft recess dimensions; a mismatch will cause either severe tip collision or an out-of-range sensor gap failure.\u003c\/p\u003e\n\n\u003ch4 style=\"color: #1a365d; margin-top: 1rem; margin-bottom: 0.5rem;\"\u003eApplication Pitfalls \u0026amp; Engineering Notes\u003c\/h4\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eUnder thermal loading, the housing sleeve undergoes thermal expansion. For high-temperature turbine casings, compute the longitudinal expansion rate of the 6.2-inch aluminum and steel components to prevent drift in the physical voltage-gap calibration. Always verify the Viton elastomer (-03 option) compatibility with the specific synthetic diester or mineral lubricants present within the casing to prevent fluid leakage past the O-ring interface.\u003c\/p\u003e\n\n\u003ch4 style=\"color: #1a365d; margin-top: 1rem; margin-bottom: 0.5rem;\"\u003eCommissioning \u0026amp; Wiring Tips\u003c\/h4\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eAlways secure the internal proximity probe to the sleeve using a thread-locking compound or the dedicated mechanical locking collar. Avoid sharp bends in the delicate coaxial extension cable when feeding it through the internal sleeve pathway. Maintain the OEM-specified minimum bend radius of 25.4 mm (1.0 inch) to prevent structural cable failure and high-frequency noise spikes in the radial vibration monitor.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cdiv style=\"background-color: #fff5f5; border-left: 4px solid #c53030; padding: 1rem; margin-bottom: 1.5rem; color: #9b2c2c;\"\u003e\n  \u003cstrong\u003eCRITICAL WARNING:\u003c\/strong\u003e Prior to threading the housing assembly into the machinery casing, verify the target machine is completely de-energized, non-operational, and zero-pressure states are confirmed. Failure to de-pressurize the casing can lead to high-velocity component ejection or hazardous fluid leakage.\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: flex; flex-direction: column; gap: 1rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 1rem;\"\u003e\n    \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; width: 2rem; height: 2rem; border-radius: 50%; display: flex; align-items: center; justify-content: center; font-weight: bold; flex-shrink: 0;\"\u003e1\u003c\/div\u003e\n    \u003cp style=\"color: #2d3748; margin: 0;\"\u003eApply thread sealant to the 3\/4-14 NPT process mount thread and hand-thread the assembly base into the machine casing to avoid cross-threading.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 1rem;\"\u003e\n    \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; width: 2rem; height: 2rem; border-radius: 50%; display: flex; align-items: center; justify-content: center; font-weight: bold; flex-shrink: 0;\"\u003e2\u003c\/div\u003e\n    \u003cp style=\"color: #2d3748; margin: 0;\"\u003eSecure the base to specified torque ratings using a calibrated wrench on the integral hex flats, ensuring the base is flush with the machine housing.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 1rem;\"\u003e\n    \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; width: 2rem; height: 2rem; border-radius: 50%; display: flex; align-items: center; justify-content: center; font-weight: bold; flex-shrink: 0;\"\u003e3\u003c\/div\u003e\n    \u003cp style=\"color: #2d3748; margin: 0;\"\u003eFeed the proximity probe carefully down the 6.2-inch sleeve, adjusting the physical position using a digital voltmeter measuring the probe's DC bias voltage output relative to the target shaft.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 1rem;\"\u003e\n    \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; width: 2rem; height: 2rem; border-radius: 50%; display: flex; align-items: center; justify-content: center; font-weight: bold; flex-shrink: 0;\"\u003e4\u003c\/div\u003e\n    \u003cp style=\"color: #2d3748; margin: 0;\"\u003eVerify that the Viton O-ring is properly seated within its groove before threading the heavy-walled aluminum dome cover onto the base to achieve an environmental seal.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666622837099,"sku":"21000-16-10-000-062-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-16-10-000-062-03-02-proximity-probe-housingassemblies-42stdyx54wb_957c6290-90f1-4df8-b005-b3d95fb1943a.jpg?v=1765444281"},{"product_id":"bently-nevada-31000-27-05-00-035-03-02-english-proximity-probe-housing-assemblies","title":"Bently Nevada 31000-27-05-00-035-03-02 English Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e31000-27-05-00-035-03-02\u003c\/strong\u003e is an English proximity probe housing assembly designed for housing and protecting 3300 XL 8 mm proximity transducers. This specific configuration features a 3300 XL 8 mm probe with multiple approvals (Option 27), a 0.5 m probe cable (Option 05), and a 3.5 inch probe penetration depth (Option 035). The assembly is engineered to provide a robust environmental seal for monitoring chains in industrial rotating machinery, ensuring the integrity of eddy-current displacement measurements.\u003c\/p\u003e\n\n\u003cp\u003eThis housing assembly utilizes a 3\/4-14 NPT mounting thread (Option 02) and is configured with two plugs and one M20 fitting with a cable seal grip (Option 03) to accommodate cable routing requirements. The 31000 series housing is standard for North American and global installations requiring 3\/4-14 NPT interface, supporting the integration of 3300 XL series probes into machine cases while maintaining protection against contaminants.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProbe Configuration (Option 27):\u003c\/strong\u003e 3300 XL 8 mm proximity probe with multiple hazardous area approvals.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Length (Option 05):\u003c\/strong\u003e 0.5 m (20 in) probe cable assembly.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStandoff Adapter (Option 00):\u003c\/strong\u003e No standoff adapter installed; direct mount configuration.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePenetration Depth (Option 035):\u003c\/strong\u003e 3.5 inches (89 mm) probe penetration length for standard positioning.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFittings (Option 03):\u003c\/strong\u003e Includes one M20 fitting, cable seal grip for armored cables, and two plugs for unused ports.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMounting Thread (Option 02):\u003c\/strong\u003e 3\/4-14 NPT mounting thread interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eCentrifugal compressors and pumps\u003c\/li\u003e\n    \u003cli\u003eSteam and gas turbines\u003c\/li\u003e\n    \u003cli\u003eReciprocating compressors\u003c\/li\u003e\n    \u003cli\u003eGearboxes and drive trains\u003c\/li\u003e\n    \u003cli\u003eCritical machinery shaft vibration and position monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n    \u003ctr\u003e\n        \u003cth\u003eOption\u003c\/th\u003e\n        \u003cth\u003eCode on This SKU\u003c\/th\u003e\n        \u003cth\u003eDescription\u003c\/th\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n        \u003ctd\u003e31000-27-05-00-035-03-02\u003c\/td\u003e\n        \u003ctd\u003eEnglish Proximity Probe Housing Assembly\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n        \u003ctd\u003e27\u003c\/td\u003e\n        \u003ctd\u003e3300 XL 8 mm probe, multiple approvals\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n        \u003ctd\u003e05\u003c\/td\u003e\n        \u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n        \u003ctd\u003e00\u003c\/td\u003e\n        \u003ctd\u003eNone\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eD - Probe Penetration Option\u003c\/td\u003e\n        \u003ctd\u003e035\u003c\/td\u003e\n        \u003ctd\u003e3.5 in (89 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eE - Fittings\u003c\/td\u003e\n        \u003ctd\u003e03\u003c\/td\u003e\n        \u003ctd\u003eTwo plugs, one M20 fitting, one cable seal grip\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n        \u003ctd\u003e02\u003c\/td\u003e\n        \u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n    \u003ctr\u003e\n        \u003cth\u003eParameter\u003c\/th\u003e\n        \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eManufacturer\u003c\/td\u003e\n        \u003ctd\u003eBently Nevada\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eSeries\u003c\/td\u003e\n        \u003ctd\u003e31000 English Proximity Probe Housing\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n        \u003ctd\u003e3300 XL 8 mm Proximity Transducer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eMounting Thread\u003c\/td\u003e\n        \u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eHousing Material\u003c\/td\u003e\n        \u003ctd\u003eStainless Steel \/ Corrosion Resistant\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eWeight\u003c\/td\u003e\n        \u003ctd\u003e1.2 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eProbe Penetration Range\u003c\/td\u003e\n        \u003ctd\u003eAdjustable; specified at 3.5 in (89 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eInstall the outer sleeve securely into the machine case before fitting the housing assembly.\u003c\/li\u003e\n    \u003cli\u003eAdjust the probe gap according to the transducer technical specifications prior to final housing closure.\u003c\/li\u003e\n    \u003cli\u003eEnsure the probe sleeve is properly seated; for sleeve lengths exceeding 305 mm (12 in), use the probe support \/ oil seal (37948-01) to prevent resonance.\u003c\/li\u003e\n    \u003cli\u003eTighten conduit fittings and cable glands to maintain the environmental seal rating.\u003c\/li\u003e\n    \u003cli\u003eIf hole plugs are utilized for unused ports, tighten the hole plug nuts to 0.5 N-m (5 in-lbs).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eMultiple approvals (Option 27) covering CSA, ATEX, and IECEx for hazardous area operation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666623132011,"sku":"31000-27-05-00-035-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-27-05-00-035-03-02-proximity-probe-housing-assemblies-lvxwjkfznpv_256b6b89-b0a5-407f-8a3f-a3c5e0fb50f3.jpg?v=1765444285"},{"product_id":"bently-nevada-21000-16-05-00-077-03-02-proximity-probe-housing-assemblies","title":"Bently Nevada 21000-16-05-00-077-03-02 Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e21000-16-05-00-077-03-02\u003c\/strong\u003e is a specific configuration of the Bently Nevada 21000 series aluminum proximity probe housing assembly, designed for the external mounting of 3300 XL 8 mm proximity transducers. This assembly provides a robust, weather-resistant enclosure for the probe and its connector, ensuring mechanical protection in industrial environments. This unit features a 0.5 m (20 in) probe cable (Option 05), no standoff adapter (Option 00), and a 7.7 in probe penetration depth (Option 077).\u003c\/p\u003e\n\n\u003cp\u003eEngineered to comply with the American Petroleum Institute (API) 670 Standard, this housing assembly serves as a critical component for reliable shaft vibration and position monitoring. The 16 configuration code indicates compatibility with the 3300 XL 8 mm probe series. The assembly includes a cable seal grip (Option 03) to accommodate varying cable diameters and a 1-11 1\/2 NPT mounting thread (Option 02) for secure attachment to machine cases.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProbe Compatibility:\u003c\/strong\u003e Configured for 3300 XL 8 mm proximity probes (Option 16).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProbe Cable Length:\u003c\/strong\u003e Includes 0.5 m (20 in) lead length (Option 05).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProbe Penetration:\u003c\/strong\u003e 7.7 inch (195.6 mm) penetration depth (Option 077).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Aluminum body with 304 stainless steel sleeve for durability.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Equipped with one cable seal grip (Option 03) for secure cable entry.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMounting Thread:\u003c\/strong\u003e 1-11 1\/2 NPT mounting thread (Option 02) featuring increased thread count for structural stiffness.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAPI Compliance:\u003c\/strong\u003e Designed to meet API 670 standards for externally mounted probe housings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eUsed primarily in power generation, petrochemical, and oil and gas industries for the external mounting of proximity probes on rotating machinery such as turbines, compressors, pumps, and motors. It is suitable for applications where environmental protection of the probe and connector system is required to maintain measurement integrity.\u003c\/p\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n    \u003ctr\u003e\n        \u003cth\u003eOption\u003c\/th\u003e\n        \u003cth\u003eCode\u003c\/th\u003e\n        \u003cth\u003eDescription\u003c\/th\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n        \u003ctd\u003e\u003cstrong\u003e21000-16-05-00-077-03-02\u003c\/strong\u003e\u003c\/td\u003e\n        \u003ctd\u003e21000 Proximity Probe Housing Assembly\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eA - Probe Series\u003c\/td\u003e\n        \u003ctd\u003e16\u003c\/td\u003e\n        \u003ctd\u003e3300 XL 8 mm probe\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eB - Cable Length\u003c\/td\u003e\n        \u003ctd\u003e05\u003c\/td\u003e\n        \u003ctd\u003e0.5 m (20 in) probe cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n        \u003ctd\u003e00\u003c\/td\u003e\n        \u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n        \u003ctd\u003e077\u003c\/td\u003e\n        \u003ctd\u003e7.7 in (195.6 mm) penetration depth\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eE - Fittings\u003c\/td\u003e\n        \u003ctd\u003e03\u003c\/td\u003e\n        \u003ctd\u003eOne cable seal grip\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n        \u003ctd\u003e02\u003c\/td\u003e\n        \u003ctd\u003e1 - 11 1\/2 NPT mounting thread\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n    \u003ctr\u003e\n        \u003cth\u003eParameter\u003c\/th\u003e\n        \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eManufacturer\u003c\/td\u003e\n        \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003ePart Number\u003c\/td\u003e\n        \u003ctd\u003e21000-16-05-00-077-03-02\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eHousing Material\u003c\/td\u003e\n        \u003ctd\u003eAluminum body, 304 stainless steel sleeve\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eWeight\u003c\/td\u003e\n        \u003ctd\u003e1.1 kg (2.4 lb) typical (without fittings)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eMounting Thread\u003c\/td\u003e\n        \u003ctd\u003e1 - 11 1\/2 NPT\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n        \u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eCable Entry\u003c\/td\u003e\n        \u003ctd\u003eCable seal grip (Option 03)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003eTemperature Range\u003c\/td\u003e\n        \u003ctd\u003e-51 degC to +177 degC (-60 degF to +351 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the probe lead is longer than the internal sleeve to prevent cable strain. For penetration lengths (C+D) exceeding 300 mm (12 in), additional sleeve support is mandatory to mitigate resonance. Use the provided cable seal grip (Option 03) to ensure a proper seal against moisture and contaminants. Ensure the NPT mounting threads are properly sealed using thread sealant compatible with the environment.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eThe 21000 housing assembly is compliant with RoHS Directive 2011\/65\/EU. For hazardous area applications, ensure specific installation requirements are met per the system datasheet and local electrical codes. The 21000 series is compatible with CSA-rated installations when ordered with appropriate components.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666624868715,"sku":"21000-16-05-00-077-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-16-05-00-077-03-02-proximity-probe-housingassemblies-nsu0ujb13wd_a771df1b-8e16-439d-9c8a-1d1ed48fdbac.jpg?v=1765444317"},{"product_id":"bently-nevada-21000-33-10-00-070-04-02-proximity-probe-housing-assembly","title":"Bently Nevada 21000-33-10-00-070-04-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e21000-33-10-00-070-04-02\u003c\/strong\u003e is an aluminum proximity probe housing assembly designed for the external mounting of eddy-current transducers. This specific configuration features the \u003cstrong\u003e3300 XL NSv probe\u003c\/strong\u003e (Option 33), including a connector protector and provisions for selectable hazardous area approvals. It is equipped with a 1.0 m (39 in) probe cable (Option 10) and a 7.0 inch probe penetration length (Option 070), without a standoff adapter (Option 00). The assembly utilizes a single 3\/4-14 NPT plug (Option 04) for conduit connections and a 3\/4-14 NPT mounting thread (Option 02).\u003c\/p\u003e\n\n\u003cp\u003eThese housings are built to comply with the American Petroleum Institute (API) 670 Standard for externally mounted proximity probe housings. The 21000 series is constructed from an aluminum body with a 304 stainless steel sleeve, providing a durable enclosure for sensitive vibration monitoring components in demanding industrial environments.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProbe: 3300 XL NSv probe with connector protector (Option 33)\u003c\/li\u003e\n\u003cli\u003eCable Length: 1.0 m (39 in) integral cable (Option 10)\u003c\/li\u003e\n\u003cli\u003eStandoff Adapter: None (Option 00)\u003c\/li\u003e\n\u003cli\u003eProbe Penetration: 7.0 inches (Option 070)\u003c\/li\u003e\n\u003cli\u003eFittings: One 3\/4-14 NPT plug (Option 04)\u003c\/li\u003e\n\u003cli\u003eMounting Thread: 3\/4-14 NPT (Option 02)\u003c\/li\u003e\n\u003cli\u003eConstruction: Aluminum body with 304 stainless steel sleeve\u003c\/li\u003e\n\u003cli\u003eCompliance: API 670 Standard compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eUsed extensively in rotating machinery protection systems to house proximity probes for shaft vibration and axial position measurement. Ideal for petrochemical, power generation, and oil and gas facilities where external probe mounting is required for monitoring critical assets like steam turbines, compressors, and pumps.\u003c\/p\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e21000-33-10-00-070-04-02\u003c\/td\u003e\n\u003ctd\u003e21000 Aluminum Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe\u003c\/td\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003ctd\u003e3300 XL NSv probe with connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e070\u003c\/td\u003e\n\u003ctd\u003e7.0 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e04\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT plug only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e21000-33-10-00-070-04-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Material\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSleeve Material\u003c\/td\u003e\n\u003ctd\u003e304 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.1 kg (2.4 lb) typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConduit Connection\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approvals\u003c\/td\u003e\n\u003ctd\u003eCSA Type 4 enclosure; API 670 compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the probe lead is longer than the sleeve to prevent tension. For sleeve lengths exceeding 304 mm (12 in), additional support is required to minimize vibration-induced resonance. Follow the installation guide for your specific probe type (3300 XL NSv) to ensure correct gap settings and proper environmental sealing.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eThis housing assembly is certified by CSA for explosion-proof applications in Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups E, F, and G; and Class III environments. It is compliant with the RoHS Directive 2011\/65\/EU.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666627490155,"sku":"21000-33-10-00-070-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-33-10-00-070-04-02-proximity-probe-housing-assemblies-yy1szkahjrn_052e27d1-b344-4675-a0f5-aee83435eff9.jpg?v=1765444351"},{"product_id":"bently-nevada-21000-27-05-40-026-03-02-21000-series-proximity-probe-housing-assembly","title":"Bently Nevada 21000-27-05-40-026-03-02 21000 Series Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eEngineered to safeguard critical machinery monitoring sensors in harsh industrial environments, the Bently Nevada 21000-27-05-40-026-03-02 provides robust physical and environmental protection for proximity probes. This explosion-proof assembly allows plant operators to adjust sensor insertion depth externally, eliminating the need to shut down rotating machinery for routine probe gapping. Constructed from durable, copper-free aluminum, the housing serves as a reliable shield against mechanical impact, moisture ingress, and hazardous atmospheres in industrial environments.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1a365d; border-bottom: 2px solid #2b6cb0; padding-bottom: 0.5rem; margin-top: 1.5rem;\"\u003eFeatures\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExternal Adjustability:\u003c\/strong\u003e Facilitates safe, external gapping and mechanical adjustment of proximity probes without opening or stopping the machine casing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHazardous Area Certified:\u003c\/strong\u003e Designed and approved for explosion-proof and flameproof installations in classified environments.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRugged Aluminum Construction:\u003c\/strong\u003e Fabricated from copper-free aluminum to withstand corrosive elements and physical impacts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable Protection:\u003c\/strong\u003e Integrates robust conduit entries to prevent moisture, dust, and chemicals from degrading critical signal wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #1a365d; border-bottom: 2px solid #2b6cb0; padding-bottom: 0.5rem; margin-top: 1.5rem;\"\u003eApplications\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cli\u003eSteam and gas turbine vibration and axial displacement monitoring.\u003c\/li\u003e\n  \u003cli\u003eCentrifugal compressor shaft vibration diagnostic installations.\u003c\/li\u003e\n  \u003cli\u003eHeavy industrial gearboxes, pumps, and cooling tower fans.\u003c\/li\u003e\n  \u003cli\u003ePetrochemical, refinery, and power generation facilities requiring explosion-proof protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #1a365d; border-bottom: 2px solid #2b6cb0; padding-bottom: 0.5rem; margin-top: 1.5rem;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; width: 100%; margin-bottom: 1.5rem;\"\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; color: #2d3748;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"border-bottom: 2px solid #1a365d;\"\u003e\n        \u003cth style=\"text-align: left; padding: 8px; font-weight: bold;\"\u003eParameter\u003c\/th\u003e\n        \u003cth style=\"text-align: left; padding: 8px; font-weight: bold;\"\u003eSpecification\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eManufacturer\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eBently Nevada\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eModel Number\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e21000-27-05-40-026-03-02\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eProduct Type\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eProximity Probe Housing Assembly\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eHousing Material\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eCopper-free Aluminum\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eExplosion Protection\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eExplosion-proof \/ Flameproof (Ex d)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eEnvironmental Rating\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eIP66 \/ NEMA 4X equivalent\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eCountry of Origin\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eUnited States\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eShipping Weight (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e2.1 kg\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003ePackage Dimensions (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e280 x 180 x 150 mm\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3 style=\"color: #1a365d; border-bottom: 2px solid #2b6cb0; padding-bottom: 0.5rem; margin-top: 1.5rem;\"\u003eEmpirical Engineering Insights\u003c\/h3\u003e\n\u003ch4 style=\"color: #2d3748; margin-top: 1rem; margin-bottom: 0.5rem;\"\u003eAlternative Models \u0026amp; Compatibility\u003c\/h4\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eThe 21000 series features an aluminum body standard for general industrial settings. For highly corrosive marine or chemical-washdown environments, the stainless steel 21005 series housing is the recommended physical drop-in upgrade. Always verify that the probe thread and sleeve length match your existing 3300 or 3300 XL transducer configuration.\u003c\/p\u003e\n\n\u003ch4 style=\"color: #2d3748; margin-top: 1rem; margin-bottom: 0.5rem;\"\u003eApplication Pitfalls \u0026amp; Engineering Notes\u003c\/h4\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eWhen sizing sleeve lengths, avoid choosing a sleeve that is too long for the available clearance. If the sleeve is driven directly into the shaft during machinery start-up, it will destroy the proximity probe tip and potentially score the target shaft. Keep the internal O-ring seal lubricated to prevent moisture intrusion, which can lead to rapid signal drift or ground faults in the driver loop.\u003c\/p\u003e\n\n\u003ch4 style=\"color: #2d3748; margin-top: 1rem; margin-bottom: 0.5rem;\"\u003eCommissioning \u0026amp; Wiring Tips\u003c\/h4\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eAlways apply a non-setting, high-temperature thread lubricant to the dome cover threads during commissioning. Aluminum-to-aluminum threads are prone to galling, which can make future probe calibrations or replacements extremely difficult without damaging the housing body.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1a365d; border-bottom: 2px solid #2b6cb0; padding-bottom: 0.5rem; margin-top: 1.5rem;\"\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cdiv style=\"background-color: #fff5f5; border-left: 4px solid #c53030; padding: 1rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cstrong style=\"color: #9b2c2c; display: block; margin-bottom: 0.5rem;\"\u003eCRITICAL WARNING\u003c\/strong\u003e\n  \u003cp style=\"color: #9b2c2c; margin: 0;\"\u003eDe-energize all associated sensor drivers and confirm that the local atmosphere is free of combustible gases before opening the housing cover or adjusting the probe in classified hazardous zones.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: flex; flex-direction: column; gap: 1rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 1rem;\"\u003e\n    \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; min-width: 2rem; height: 2rem; border-radius: 50%; display: flex; align-items: center; justify-content: center; font-weight: bold;\"\u003e1\u003c\/div\u003e\n    \u003cdiv style=\"color: #2d3748;\"\u003eCalculate total target insertion depth and verify clearance inside the machinery casing.\u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 1rem;\"\u003e\n    \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; min-width: 2rem; height: 2rem; border-radius: 50%; display: flex; align-items: center; justify-content: center; font-weight: bold;\"\u003e2\u003c\/div\u003e\n    \u003cdiv style=\"color: #2d3748;\"\u003eThread the main housing body securely into the machine casing port using appropriate sealant threads.\u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 1rem;\"\u003e\n    \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; min-width: 2rem; height: 2rem; border-radius: 50%; display: flex; align-items: center; justify-content: center; font-weight: bold;\"\u003e3\u003c\/div\u003e\n    \u003cdiv style=\"color: #2d3748;\"\u003eInsert the proximity probe and adjust the sleeve to establish the correct target voltage gap.\u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 1rem;\"\u003e\n    \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; min-width: 2rem; height: 2rem; border-radius: 50%; display: flex; align-items: center; justify-content: center; font-weight: bold;\"\u003e4\u003c\/div\u003e\n    \u003cdiv style=\"color: #2d3748;\"\u003eTighten the sleeve locknut to lock the sensor position and prevent drift under running vibration.\u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 1rem;\"\u003e\n    \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; min-width: 2rem; height: 2rem; border-radius: 50%; display: flex; align-items: center; justify-content: center; font-weight: bold;\"\u003e5\u003c\/div\u003e\n    \u003cdiv style=\"color: #2d3748;\"\u003eRoute the probe extension cable through the conduit entry, apply a robust seal gland, and hand-tighten the protective dome cover.\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666628637035,"sku":"21000-27-05-40-026-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-27-05-40-026-03-02-proximity-probehousing-assemblies-fl5fejukjq1_4905e2cd-1798-4e29-b6a7-8823b0c9a795.jpg?v=1765444365"},{"product_id":"bently-nevada-31000-00-00-00-031-01-02-english-proximity-probe-housing-assembly","title":"Bently Nevada 31000-00-00-00-031-01-02 English Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nThe \u003cstrong\u003e31000-00-00-00-031-01-02\u003c\/strong\u003e is a specialized \u003cstrong\u003eEnglish Proximity Probe Housing Assembly\u003c\/strong\u003e designed for secure, external machinery case mounting of proximity transducers. This specific configuration includes a \u003cstrong\u003e3300 XL NSv probe with connector protector\u003c\/strong\u003e (Option A: 31), without probe cable (Option B: 00), without standoff adapter (Option C: 00), 031 mm penetration (Option D: 031), one M25 fitting (Option E: 01), and M24 x 3 mounting thread (Option F: 02).\n\nThis housing assembly provides robust mechanical and environmental protection for sensors used in critical machinery monitoring, such as radial vibration or Keyphasor measurements. The 31000 series is constructed from polyphenylene sulfide (PPS), a high-strength thermoplastic offering excellent corrosion resistance, complemented by corrosion-resistant stainless steel components. The design facilitates external access to the proximity probe and extension cable, allowing for gap adjustment or probe replacement without requiring the disassembly of the machine case.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS) thermoplastic with stainless steel elements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Configuration (Option A: 31):\u003c\/strong\u003e Includes 3300 XL NSv probe with connector protector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetration (Option D: 031):\u003c\/strong\u003e 31 mm probe penetration depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings (Option E: 01):\u003c\/strong\u003e One M25 fitting for cable routing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Thread (Option F: 02):\u003c\/strong\u003e M24 x 3 thread interface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e Compliant with API 670 standards for externally mounted proximity probe housings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessibility:\u003c\/strong\u003e Allows for gap adjustment and sensor replacement without machine case disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration monitoring on rotating machinery\u003c\/li\u003e\n\u003cli\u003eKeyphasor and speed measurement applications\u003c\/li\u003e\n\u003cli\u003eInstallations requiring external probe access for simplified maintenance\u003c\/li\u003e\n\u003cli\u003eHazardous area applications (when used with appropriate I.S. barriers and transducer systems)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-00-00-00-031-01-02\u003c\/td\u003e\n\u003ctd\u003e31000 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e31\u003c\/td\u003e\n\u003ctd\u003e3300 XL NSv probe with connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eProbe cable not required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e031\u003c\/td\u003e\n\u003ctd\u003e31 mm penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e01\u003c\/td\u003e\n\u003ctd\u003eOne M25 fitting, two plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eM24 x 3 mounting thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-00-00-00-031-01-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene Sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670 Standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003eM24 x 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Type\u003c\/td\u003e\n\u003ctd\u003eM25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature (NSv Probe)\u003c\/td\u003e\n\u003ctd\u003e-34 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature (NSv Probe)\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the machine casing is properly affixed to the bearing to maintain accurate relative vibration signals for radial measurements.\u003c\/li\u003e\n\u003cli\u003eThe housing provides environmental and mechanical protection; it is not an explosion-proof rated housing.\u003c\/li\u003e\n\u003cli\u003eIf \"C\" plus \"D\" dimensions exceed 305 mm (12 in), install additional sleeve support near the probe to prevent resonance.\u003c\/li\u003e\n\u003cli\u003eFor probe penetration lengths between 25 mm and 50 mm, counter-boring the machine case may be necessary to minimize side-view or rear-view effects.\u003c\/li\u003e\n\u003cli\u003eTighten hole plug nuts to 0.5 N-m (5 in-lbs) if unused ports are plugged.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666635125099,"sku":"31000-00-00-00-031-01-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-00-00-00-031-01-02-proximity-probe-housingassemblies-yandmotcrwc_d19c17b4-d3ab-43ec-8482-95297339d271.jpg?v=1765444457"},{"product_id":"bently-nevada-31000-16-10-00-159-00-02-english-proximity-probe-housing-assembly","title":"Bently Nevada 31000-16-10-00-159-00-02 English Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nThe \u003cstrong\u003e31000-16-10-00-159-00-02\u003c\/strong\u003e is an English Proximity Probe Housing Assembly configured for use with 3300 XL 8 mm proximity transducer systems. This assembly features a 3300 XL 8 mm probe (Option 16) with a 1.0 m (39 in) probe cable (Option 10) and a probe penetration depth of 15.9 in (Option 159). Designed for non-contact vibration and position monitoring, this housing provides essential mechanical and environmental protection for the transducer probe, ensuring accurate signal transmission in demanding industrial environments.\n\nThe assembly is supplied without fittings (Option 00) and utilizes a 3\/4-14 NPT mounting thread (Option 02). This configuration is part of the 31000 series, intended for applications where standard environmental protection is required. It is not an explosion-proof housing; for hazardous area requirements necessitating explosion-proof enclosures, alternate housing series should be selected.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 16:\u003c\/strong\u003e Includes factory-integrated 3300 XL 8 mm proximity probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 10:\u003c\/strong\u003e 1.0 meter (39 in) probe cable length, supporting standard mounting distances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 159:\u003c\/strong\u003e Precise probe penetration depth of 15.9 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 02:\u003c\/strong\u003e 3\/4-14 NPT mounting thread for standard industrial connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Protection:\u003c\/strong\u003e Provides robust covering for the proximity probe, shielding it from physical impact and environmental debris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Compatibility:\u003c\/strong\u003e Designed for reliability in harsh rotating machinery environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\nThe 31000 housing assembly is used extensively in critical machinery protection applications, including:\n\u003cul\u003e\n\u003cli\u003eSteam and gas turbines\u003c\/li\u003e\n\u003cli\u003eCentrifugal compressors and pumps\u003c\/li\u003e\n\u003cli\u003eLarge electric motors and generators\u003c\/li\u003e\n\u003cli\u003eReciprocating machinery\u003c\/li\u003e\n\u003cli\u003eHydroelectric units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrderable Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e31000-16-10-00-159-00-02\u003c\/td\u003e\n\u003ctd\u003eEnglish Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e159\u003c\/td\u003e\n\u003ctd\u003e15.9 in penetration depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eWithout fittings; two plugs and two washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e31000 English Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-16-10-00-159-00-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Penetration Length\u003c\/td\u003e\n\u003ctd\u003e15.9 in (404 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings\u003c\/td\u003e\n\u003ctd\u003eNone (two plugs, two washers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC (-60 degF to +351 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePlastic (Standard 31000 Series)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the housing is securely mounted using the 3\/4-14 NPT thread to prevent vibration-induced loosening.\u003c\/li\u003e\n\u003cli\u003eDo not over-tighten the housing, as it is constructed for mechanical and environmental protection rather than structural load-bearing.\u003c\/li\u003e\n\u003cli\u003eEnsure the probe tip is installed at the correct gap from the target as specified in the transducer system manual.\u003c\/li\u003e\n\u003cli\u003eIf installing in environments with high moisture or steam, ensure plugs and washers are correctly seated to maintain the intended environmental seal.\u003c\/li\u003e\n\u003cli\u003eVerify the probe penetration depth against the machine case requirements before final tightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\nThe 31000\/32000 series housings provide mechanical and environmental protection. For hazardous area applications, ensure the individual probe and Proximitor sensor used within the assembly are rated for the specific area classification. This housing is not explosion-proof.","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666635288939,"sku":"31000-16-10-00-159-00-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-16-10-00-159-00-02-proximity-probe-housingassemblies-lhrredsorxm_c18d0eb9-fee2-485e-83ee-9484144a109c.jpg?v=1765444461"},{"product_id":"bently-nevada-31000-28-05-50-050-03-02-english-proximity-probe-housing-assemblies","title":"Bently Nevada 31000-28-05-50-050-03-02 English Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nThe \u003cstrong\u003e31000-28-05-50-050-03-02\u003c\/strong\u003e is an English proximity probe housing assembly designed for use with 3300 XL 8 mm proximity transducer systems. This configuration features an 8 mm probe with a connector protector (Option 28) and a 0.5 m probe cable (Option 05). The assembly is constructed from polyphenylene sulfide (PPS), a high-strength thermoplastic material, combined with corrosion-resistant stainless steel components to provide robust mechanical and environmental protection for proximity probes mounted through machine cases.\n\nThis housing assembly allows for external access to the proximity probe and its extension cable, enabling gap adjustments or probe replacements without requiring disassembly of the machinery. It is typically used for radial vibration or position measurements on rotating machinery. The assembly includes a 50 mm standoff adapter (Option 50), a 50 mm probe penetration depth (Option 050), two plugs with one M20 fitting (Option 03), and a 3\/4-14 NPT mounting thread (Option 02). It is compliant with API 670 standards for externally mounted proximity probe housings.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfigured with 3300 XL 8 mm proximity probe and connector protector for enhanced reliability\u003c\/li\u003e\n\u003cli\u003ePPS thermoplastic housing with stainless steel fittings for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSupports radial vibration and shaft axial position monitoring\u003c\/li\u003e\n\u003cli\u003eAllows for probe gap adjustment and replacement without machine disassembly\u003c\/li\u003e\n\u003cli\u003eFully compliant with API 670 standards for external probe housings\u003c\/li\u003e\n\u003cli\u003eCompatible with hazardous area applications when installed with appropriate I.S. barriers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower generation equipment (turbines, generators)\u003c\/li\u003e\n\u003cli\u003eOil and gas compressors and pumps\u003c\/li\u003e\n\u003cli\u003ePetrochemical processing machinery\u003c\/li\u003e\n\u003cli\u003eRotating equipment requiring external access for vibration monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-05-50-050-03-02\u003c\/td\u003e\n\u003ctd\u003eProximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, with connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e050\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eTwo plugs, one M20 fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-05-50-050-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Components\u003c\/td\u003e\n\u003ctd\u003eCorrosion-resistant stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings\u003c\/td\u003e\n\u003ctd\u003eM20 fitting with plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAPI Compliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670 Standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the machine casing is affixed to the bearing to obtain an accurate relative vibration signal.\u003c\/li\u003e\n\u003cli\u003eInstall the outer sleeve into the machine case before inserting the probe sleeve.\u003c\/li\u003e\n\u003cli\u003eAdjust the probe gap after inserting the probe sleeve.\u003c\/li\u003e\n\u003cli\u003eReconnect the probe cable and connector protector prior to sealing the housing cover.\u003c\/li\u003e\n\u003cli\u003eTighten hole plug nuts to 0.5 N-m (5 in-lbs) if applicable.\u003c\/li\u003e\n\u003cli\u003e\"C\" plus \"D\" dimension combinations greater than 305 mm (12 in) require additional sleeve support near the probe to prevent resonance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666636271979,"sku":"31000-28-05-50-050-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-05-50-050-03-02-sensor-type-hkratgbgfc1_37315e95-93d5-4a33-ae65-41c28c51b521.jpg?v=1765444476"},{"product_id":"bently-nevada-21000-28-05-35-028-00-02-21000-series-proximity-probe-housing-assembly","title":"Bently Nevada 21000-28-05-35-028-00-02 21000 Series Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eDesigned for robust mechanical protection in demanding industrial environments, the \u003cstrong\u003eBently Nevada 21000-28-05-35-028-00-02\u003c\/strong\u003e is a rugged, field-proven probe housing assembly. This mechanical enclosure is engineered to shield proximity probes from external hazards such as oil, moisture, and physical impacts while maintaining optimal measurement alignment.\u003c\/p\u003e\n\u003cp\u003eThe 21000 Series housing simplifies the installation, adjustment, and replacement of proximity transducers. It allows maintenance personnel to perform external calibration and gap adjustments of the internal probe without dismantling machine covers or stopping the machinery, significantly reducing downtime and enhancing system safety. Constructed from durable materials, this assembly ensures long-term structural integrity and precise sensor positioning for critical machinery diagnostics.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides secure environmental and physical protection for internal proximity probes.\u003c\/li\u003e\n  \u003cli\u003eEnables external gap adjustment and replacement of the probe assembly.\u003c\/li\u003e\n  \u003cli\u003eRobust housing design designed to withstand harsh industrial operating environments.\u003c\/li\u003e\n  \u003cli\u003eSupports standard conduit and cable routing interfaces to prevent moisture ingress.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Bently Nevada proximity probe systems for critical vibration and position monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSteam and gas turbine vibration monitoring systems.\u003c\/li\u003e\n  \u003cli\u003eLarge industrial compressors, pumps, and fans.\u003c\/li\u003e\n  \u003cli\u003ePetrochemical and oil refinery rotating machinery protection.\u003c\/li\u003e\n  \u003cli\u003ePower generation facilities and heavy industrial plant installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePart Number\/Model\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e21000-28-05-35-028-00-02\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e21000 Series\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eProximity Probe Housing Assembly\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eHousing Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Probes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada Proximity Probes (e.g., 3300 XL series)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAdjustment Mechanism\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eExternal sleeve adjustment\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify that the shaft lead-in length matches the machinery housing dimensions prior to installation.\u003c\/li\u003e\n  \u003cli\u003eEnsure all threaded connections are properly sealed with industrial-grade sealant to prevent environmental contamination.\u003c\/li\u003e\n  \u003cli\u003eRoute cables through appropriate flexible or rigid conduit to maintain shielding and physical protection.\u003c\/li\u003e\n  \u003cli\u003eCalibrate the probe gap using a standard proximitor calibration fluid or mechanical target before final torque application.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666637484395,"sku":"21000-28-05-35-028-00-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-28-05-35-028-00-02-proximity-probehousing-assemblies-qvbk1em1joy_5b9e14fa-87a3-4b17-9104-29a82c0758df.jpg?v=1765444498"},{"product_id":"bently-nevada-21000-34-05-15-056-04-02-proximity-probe-housing-assembly","title":"Bently Nevada 21000-34-05-15-056-04-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e21000-34-05-15-056-04-02\u003c\/strong\u003e is an aluminum proximity probe housing assembly designed for the external mounting of proximity transducers. This specific configuration features a 3300 XL 8 mm probe with connector protector and selectable hazardous area approvals (Option 34), a 0.5 m probe cable length (Option 05), a 1.5 in standoff adapter (Option 15), a 5.6 in probe penetration length (Option 056), conduit fittings consisting of a 3\/4-14 NPT plug (Option 04), and a 3\/4-14 NPT mounting thread (Option 02).\u003c\/p\u003e\n\n\u003cp\u003eThis all-metal assembly provides a secure, environmentally protected, and explosion-proof enclosure for 3300 series proximity probes. It ensures accurate measurement of shaft vibration and axial position by maintaining precise probe gap alignment. Compliant with API 670 standards, this housing is suitable for demanding industrial environments including power generation, petrochemical processing, and rotating machinery monitoring.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 34 Configuration:\u003c\/strong\u003e Includes 3300 XL 8 mm probe with connector protector and selectable hazardous area approvals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Body:\u003c\/strong\u003e Lightweight yet durable construction for fixed equipment protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e 0.5 m lead length optimized for standard housing-to-terminal connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandoff Adapter:\u003c\/strong\u003e 1.5 in (38 mm) length for proper probe standoff distancing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 3\/4-14 NPT thread connection with plug fitting for secured installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExplosion-Proof Rated:\u003c\/strong\u003e Designed to meet CSA requirements for hazardous area installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternally mounted proximity probe installation on heavy rotating machinery.\u003c\/li\u003e\n\u003cli\u003eCritical machinery protection where environmental shielding for the probe and cable is required.\u003c\/li\u003e\n\u003cli\u003eHazardous area environments requiring explosion-proof certified enclosures (where CSA requirements apply).\u003c\/li\u003e\n\u003cli\u003eApplications requiring compliance with API 670 standards for machinery vibration and position monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e21000-34-05-15-056-04-02\u003c\/td\u003e\n\u003ctd\u003e21000 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e34\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe with connector protector, selectable hazardous area approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m (20 in) cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e1.5 in (38 mm) standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e056\u003c\/td\u003e\n\u003ctd\u003e5.6 in penetration length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e04\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e21000-34-05-15-056-04-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum body with 304 stainless steel sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.1 kg (2.4 lb) typical (without fittings)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC (-60 degF to +351 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approvals\u003c\/td\u003e\n\u003ctd\u003eCSA certified for Class I, Div 1 \u0026amp; 2, Groups C \u0026amp; D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the housing is mounted securely to the machine case using the specified 3\/4-14 NPT thread. When installing probe penetration lengths, verify the gap settings to maintain linear measurement ranges. For lengths exceeding 300 mm (12 in), auxiliary sleeve support is required to minimize vibration-induced resonance. Always route cabling through the conduit ports using appropriate seals to maintain the explosion-proof rating of the assembly.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eThe 21000 series housings are certified by CSA for explosion-proof applications in Class I, Divisions 1 and 2, Groups C and D, and Class II, Divisions 1 and 2, Groups E, F, and G. They are fully compliant with the American Petroleum Institute (API) 670 Standard.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666639647083,"sku":"21000-34-05-15-056-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-34-05-15-056-04-02-proximity-probe-housingassemblies-iobp5jiqqmi_240f6fab-371f-4487-8e45-9b4448bdb5f3.jpg?v=1765444538"},{"product_id":"bently-nevada-21000-16-10-35-098-03-02-proximity-probe-housing-assembly","title":"Bently Nevada 21000-16-10-35-098-03-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e21000-16-10-35-098-03-02\u003c\/strong\u003e is a robust proximity probe housing assembly designed for industrial vibration and position monitoring applications. This unit supports a \u003cstrong\u003e3300 XL 8 mm proximity probe\u003c\/strong\u003e (Option 16) with an integrated 1.0 m probe cable (Option 10). Engineered for reliable installation in demanding machinery environments, this assembly includes a 3.5 in standoff adapter (Option 35) and provides a probe penetration depth of 9.8 in (Option 098).\u003c\/p\u003e\n\n\u003cp\u003eThe housing is equipped with a cable seal grip fitting (Option 03) to ensure secure cable routing and environmental protection, and features a 3\/4-14 NPT mounting thread (Option 02) for standard industrial installation. This assembly is compatible with 3300 XL transducer systems, meeting API 670 standards for externally mounted proximity probe housings. The body is constructed from aluminum with a 304 stainless steel sleeve to withstand operational stress while maintaining the integrity of the sensing system.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with 3300 XL 8 mm proximity probes\u003c\/li\u003e\n\u003cli\u003eIncludes 1.0 m (39 in) probe cable assembly\u003c\/li\u003e\n\u003cli\u003e3.5 in (89 mm) standoff adapter for specific clearance requirements\u003c\/li\u003e\n\u003cli\u003e9.8 in (249 mm) probe penetration depth adjustment\u003c\/li\u003e\n\u003cli\u003eCable seal grip fitting for secure environmental sealing\u003c\/li\u003e\n\u003cli\u003eStandard 3\/4-14 NPT mounting thread\u003c\/li\u003e\n\u003cli\u003eAluminum body construction with 304 stainless steel sleeve for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShaft vibration monitoring on large rotating machinery\u003c\/li\u003e\n\u003cli\u003eAxial position and displacement measurement\u003c\/li\u003e\n\u003cli\u003eTurbine, compressor, and pump housing installations\u003c\/li\u003e\n\u003cli\u003eHazardous area machinery protection (verify site certification requirements)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e21000-16-10-35-098-03-02\u003c\/td\u003e\n\u003ctd\u003eProximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e3.5 in (89 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e098\u003c\/td\u003e\n\u003ctd\u003e9.8 in (249 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eOne cable seal grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e21000-16-10-35-098-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eAluminum body with 304 stainless steel sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings\u003c\/td\u003e\n\u003ctd\u003eCable seal grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.1 kg (2.4 lb) typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Range\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC (-60 degF to +351 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the probe lead is longer than the total sleeve length during assembly. For sleeve lengths exceeding 304 mm (12 in), additional sleeve support is required to minimize vibration-induced resonance. Ensure all fittings are properly tightened to maintain the integrity of the environmental seal. Confirm that the probe penetration depth is adjusted to avoid interference with rotating components, utilizing the 13 mm adjustment range provided by the assembly design.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRoHS Directive 2011\/65\/EU compliant\u003c\/li\u003e\n\u003cli\u003eDesigned for compliance with API 670 standards\u003c\/li\u003e\n\u003cli\u003eEnclosure Type 4 protection (consult datasheet for specific hazardous area drawing references)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666643087723,"sku":"21000-16-10-35-098-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-16-10-35-098-03-02-proximity-probehousing-assemblies-cp5z1qq2aat_d23e1f1c-7474-4a53-8f18-97da6e9cfcac.jpg?v=1765444579"},{"product_id":"bently-nevada-31000-28-05-35-032-03-02-english-proximity-probe-housing-assemblies","title":"Bently Nevada 31000-28-05-35-032-03-02 English Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\nThe \u003cstrong\u003e31000-28-05-35-032-03-02\u003c\/strong\u003e is an English Proximity Probe Housing Assembly designed to provide robust mechanical and environmental protection for proximity transducer systems. This specific configuration features a 3300 XL 8 mm probe with multiple approvals (Option 28), a 0.5 m probe cable (Option 05), and a 35 mm standoff adapter (Option 35). The assembly is constructed from high-strength polyphenylene sulfide (PPS), offering excellent corrosion resistance for industrial machinery environments.\n\nProximity probe housing assemblies are essential for mounting probes through machine cases, facilitating radial vibration and Keyphasor measurements while allowing for external access to the probe and its extension cable. This design permits gap adjustment or probe replacement without requiring machine disassembly. This unit is fully compliant with API 670 standards for externally mounted proximity probe housings and is suitable for use in intrinsically safe hazardous area applications when installed with appropriate I.S. barriers and transducer systems.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOption 28: Includes 3300 XL 8 mm probe with multiple approvals\u003c\/li\u003e\n\u003cli\u003eOption 05: 0.5 meter (20 in) probe cable length\u003c\/li\u003e\n\u003cli\u003eOption 35: 35 mm standoff adapter length\u003c\/li\u003e\n\u003cli\u003eOption 032: 32 mm probe penetration length\u003c\/li\u003e\n\u003cli\u003eOption 03: Two plugs, one M20 fitting\u003c\/li\u003e\n\u003cli\u003eOption 02: 3\/4-14 NPT mounting thread\u003c\/li\u003e\n\u003cli\u003eConstructed from high-strength, corrosion-resistant polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003eFully compliant with API 670 standards\u003c\/li\u003e\n\u003cli\u003eAllows for probe gap adjustment and replacement without machine case disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration monitoring on rotating machinery\u003c\/li\u003e\n\u003cli\u003eKeyphasor measurements\u003c\/li\u003e\n\u003cli\u003ePetrochemical and power generation facilities\u003c\/li\u003e\n\u003cli\u003eOil and gas industrial equipment\u003c\/li\u003e\n\u003cli\u003eEnvironments requiring external access to transducer systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-05-35-032-03-02\u003c\/td\u003e\n\u003ctd\u003e31000 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, multiple approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e35 mm length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration Option\u003c\/td\u003e\n\u003ctd\u003e032\u003c\/td\u003e\n\u003ctd\u003e32 mm length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eTwo plugs, one M20 fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread Option\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-05-35-032-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards Compliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 Celsius to +177 Celsius (-60 Fahrenheit to +351 Fahrenheit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Type\u003c\/td\u003e\n\u003ctd\u003eTwo plugs, one M20 fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the outer sleeve into the machine case first.\u003c\/li\u003e\n\u003cli\u003eInsert the probe sleeve into the assembly and adjust the probe gap according to the transducer system manual.\u003c\/li\u003e\n\u003cli\u003eEnsure the housing cover is tightened securely with captive screws after installation.\u003c\/li\u003e\n\u003cli\u003eIf hole plugs are utilized, tighten the hole plug nuts to 0.5 N-m (5 in-lbs).\u003c\/li\u003e\n\u003cli\u003eFor penetration lengths between 25 mm and 50 mm, counter boring the machine case may be necessary to reduce signal interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAPI 670 compliant\u003c\/li\u003e\n\u003cli\u003eIntrinsically safe (when installed with appropriate I.S. barriers)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666645348715,"sku":"31000-28-05-35-032-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-05-35-032-03-02-proximity-probe-housingassemblies-frfbim5menp_e63d1075-8acc-47ec-b828-de938933f939.jpg?v=1765444606"},{"product_id":"bently-nevada-31000-28-10-00-010-01-02-english-proximity-probe-housing-assemblies","title":"Bently Nevada 31000-28-10-00-010-01-02 English Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\nThe \u003cstrong\u003e31000-28-10-00-010-01-02\u003c\/strong\u003e is a fully assembled English proximity probe housing configured with a 3300 XL 8 mm transducer system (Option 28: multiple approvals). This assembly includes a 1.0 m probe cable (Option 10), 1.0 inch probe penetration (Option 010), and is mounted using a 3\/4-14 NPT thread (Option 02). The housing is equipped with one M25 conduit fitting and two plugs (Option 01).\n\nDesigned for heavy-duty industrial environments, these housing assemblies provide robust mechanical and environmental protection for proximity probes and extension cables. The system enables external access to the transducer, facilitating probe gap adjustment or replacement without requiring machine disassembly. Constructed from polyphenylene sulfide (PPS) and corrosion-resistant stainless steel, the 31000 series is fully compliant with API 670 standards for externally mounted proximity probe housings, ensuring compatibility with standard radial vibration and Keyphasor measurement installations.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eIncludes integrated 3300 XL 8 mm proximity probe with multiple hazardous area approvals\u003c\/li\u003e\n\u003cli\u003ePPS thermoplastic housing body offers high strength and chemical resistance\u003c\/li\u003e\n\u003cli\u003eAPI 670 compliant design for reliable machine case mounting\u003c\/li\u003e\n\u003cli\u003eExternal access allows for probe gap adjustment and replacement while machinery is operating\u003c\/li\u003e\n\u003cli\u003e3\/4-14 NPT mounting thread for standard industrial interfaces\u003c\/li\u003e\n\u003cli\u003eConfigured with one M25 conduit fitting and two hole plugs for flexible cable routing\u003c\/li\u003e\n\u003cli\u003e1.0 inch (25.4 mm) probe penetration depth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eRadially mounted transducers for machine case vibration monitoring\u003c\/li\u003e\n\u003cli\u003eKeyphasor measurement and speed sensing\u003c\/li\u003e\n\u003cli\u003eCritical rotating machinery protection in power generation, petrochemical, and oil and gas industries\u003c\/li\u003e\n\u003cli\u003eHazardous area environments (when installed with appropriate I.S. barriers)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-28-10-00-010-01-02\u003c\/td\u003e\n\u003ctd\u003e31000 English Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, multiple approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration Option\u003c\/td\u003e\n\u003ctd\u003e010\u003c\/td\u003e\n\u003ctd\u003e1.0 in (25.4 mm) penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e01\u003c\/td\u003e\n\u003ctd\u003eOne M25 fitting, two plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread Option\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eEnglish Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene Sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent Material\u003c\/td\u003e\n\u003ctd\u003eCorrosion-resistant stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670 Standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Penetration\u003c\/td\u003e\n\u003ctd\u003e1.0 in (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConduit Interface\u003c\/td\u003e\n\u003ctd\u003eOne M25 fitting, two hole plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\n\u003cp\u003eInstall the outer sleeve directly into the machine case before inserting the probe sleeve to ensure proper alignment. Adjust the probe gap according to the requirements of the 3300 XL monitoring system. When using hole plugs, ensure they are tightened to 0.5 N-m (5 in-lbs) to maintain environmental sealing. For probe penetration lengths between 25 mm and 50 mm, consider counter-boring the machine case to minimize potential side-view effects.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666732085611,"sku":"31000-28-10-00-010-01-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-10-00-010-01-02-proximity-probe-housingassemblies-eat3swbaaaw_c4737bb6-16b3-4396-a1b9-ff68e982d1ac.jpg?v=1765446683"},{"product_id":"bently-nevada-31000-16-05-20-040-02-02-proximity-probe-housing-assemblies","title":"Bently Nevada 31000-16-05-20-040-02-02 Proximity Probe Housing Assemblies","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e31000-16-05-20-040-02-02\u003c\/strong\u003e is a configuration of the 31000 series proximity probe housing assemblies, specifically tailored for 3300 XL 8 mm transducer systems. This assembly features a 0.5 m (20 in) probe cable (Option 05), a 200 mm standoff adapter (Option 20), and a 40 mm probe penetration (Option 040). It is equipped with two M25 fittings and one plug (Option 02) and utilizes a 3\/4-14 NPT mounting thread (Option 02), which is required to accommodate the included standoff adapter.\u003c\/p\u003e\n\n\u003cp\u003eThis housing assembly provides a protective environment for the transducer cabling and connections, isolating them from the machine case and external industrial conditions. It is engineered for use in machinery protection applications where precise shaft vibration and axial position measurements are required. The assembly includes flexible component options to accommodate various mounting thread requirements and cable entry points, ensuring compatibility with standard plant conduit configurations.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3300 XL 8 mm probe configuration (Option 16)\u003c\/li\u003e\n\u003cli\u003e0.5 m (20 in) probe cable length (Option 05)\u003c\/li\u003e\n\u003cli\u003e200 mm standoff adapter length (Option 20)\u003c\/li\u003e\n\u003cli\u003e40 mm probe penetration depth (Option 040)\u003c\/li\u003e\n\u003cli\u003eTwo M25 fittings and one plug (Option 02)\u003c\/li\u003e\n\u003cli\u003e3\/4-14 NPT mounting thread for standoff adapter support (Option 02)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHydroelectric and thermal power generation machinery\u003c\/li\u003e\n\u003cli\u003eOil and gas upstream and downstream processing equipment\u003c\/li\u003e\n\u003cli\u003ePetrochemical rotating machinery monitoring\u003c\/li\u003e\n\u003cli\u003eWater treatment and industrial pump vibration analysis\u003c\/li\u003e\n\u003cli\u003eGeneral purpose industrial rotating machinery protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e31000-16-05-20-040-02-02\u003c\/td\u003e\n\u003ctd\u003e31000 Proximity Probe Housing Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe with Connector\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Probe Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Standoff Adapter Length\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Probe Penetration\u003c\/td\u003e\n\u003ctd\u003e040\u003c\/td\u003e\n\u003ctd\u003e40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Fittings\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eTwo M25 fittings, one plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Mounting Thread\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e31000-16-05-20-040-02-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandoff Adapter\u003c\/td\u003e\n\u003ctd\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Penetration\u003c\/td\u003e\n\u003ctd\u003e40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings\u003c\/td\u003e\n\u003ctd\u003eTwo M25 fittings, one plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eStainless steel \/ Aluminum (per datasheet standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the outer sleeve is correctly installed into the machine case before fitting the housing. Adjust the probe gap according to standard 3300 XL system documentation after inserting the probe sleeve. When using the standoff adapter, confirm that the 3\/4-14 NPT thread is fully engaged. If using hole plugs, tighten the plug nuts to 0.5 N-m (5 in-lbs) to maintain the integrity of the housing environment. Ensure all conduit fittings are properly secured if using hardline or rigid conduit.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666732347755,"sku":"31000-16-05-20-040-02-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-16-05-20-040-02-02-proximity-probe-housingassemblies-ngvv3g525sa_20985c4e-0159-4b9e-8b48-336bf8d84a7c.jpg?v=1765446694"},{"product_id":"bently-nevada-31000-00-00-15-000-01-02-proximitor-sensor-housing","title":"Bently Nevada 31000-00-00-15-000-01-02 Proximitor Sensor Housing","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eEngineered to deliver high-integrity mechanical and environmental shielding, the \u003cstrong\u003eBently Nevada 31000-00-00-15-000-01-02\u003c\/strong\u003e serves as a robust protective enclosure for proximity transmitter modules. This heavy-duty housing is specifically designed to isolate delicate field instrumentation from extreme temperatures, corrosive elements, and high-vibration exposure common in demanding industrial environments. Constructed from cast copper-free aluminum, the assembly ensures the long-term operational reliability of 3300 XL and 7200 series Proximitor sensors in hazardous locations.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHazardous Area Rating:\u003c\/strong\u003e Certified for deployment in classified locations requiring flameproof and explosion-proof protection configurations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Enclosure:\u003c\/strong\u003e Cast aluminum body with protective coating designed to withstand marine, chemical, and offshore atmospheres.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure Conduit Termination:\u003c\/strong\u003e NPT threaded connections ensure liquid-tight, gas-tight seals when paired with proper cable glands or conduit systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Mounting Plate:\u003c\/strong\u003e Pre-drilled internal chassis allows direct, low-vibration mounting of standard proximitor footprints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cli\u003eSteam turbine and gas turbine bearing housing monitoring.\u003c\/li\u003e\n  \u003cli\u003ePetrochemical and gas plant compressor monitoring structures.\u003c\/li\u003e\n  \u003cli\u003eIndustrial fan, blower, and cooling tower gearbox vibration installations.\u003c\/li\u003e\n  \u003cli\u003eHigh-humidity power generation plants requiring physical protection for sensor electronics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; width: 100%; margin-bottom: 1.5rem;\"\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; color: #2d3748;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"border-bottom: 2px solid #2d3748; text-align: left;\"\u003e\n        \u003cth style=\"padding: 0.5rem; font-weight: bold;\"\u003eParameter\u003c\/th\u003e\n        \u003cth style=\"padding: 0.5rem; font-weight: bold;\"\u003eSpecification Value\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.5rem; font-weight: bold;\"\u003eManufacturer\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.5rem;\"\u003eBently Nevada\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.5rem; font-weight: bold;\"\u003ePart Number\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.5rem;\"\u003e31000-00-00-15-000-01-02\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.5rem; font-weight: bold;\"\u003eHousing Category\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.5rem;\"\u003eExplosion-Proof \/ Weatherproof Proximitor Housing\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.5rem; font-weight: bold;\"\u003eEnclosure Material\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.5rem;\"\u003eCast copper-free aluminum alloy\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.5rem; font-weight: bold;\"\u003eEnvironmental Rating\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.5rem;\"\u003eIP66 \/ NEMA 4X equivalent (with certified seals)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.5rem; font-weight: bold;\"\u003eInternal Capacity\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.5rem;\"\u003eSupports up to one standard 3300 XL or 7200 Proximitor Sensor\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.5rem; font-weight: bold;\"\u003eCountry of Origin\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.5rem;\"\u003eUnited States\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.5rem; font-weight: bold;\"\u003eShipping Weight (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.5rem;\"\u003e2.85 kg (6.28 lbs)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 0.5rem; font-weight: bold;\"\u003ePackage Dimensions (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"padding: 0.5rem;\"\u003e240 mm x 205 mm x 180 mm\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eEmpirical Engineering Insights\u003c\/h3\u003e\n\n\u003ch3\u003eAlternative Models \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eThe 31000 series housing maintains physical interchangeability with legacy 32000 series housings. When transitioning older 7200 series installations to modern 3300 XL 8mm proximity systems, the internal mounting plate must be aligned to ensure proper grounding separation and spacing from the housing’s metal wall to avoid crosstalk or mechanical interference.\u003c\/p\u003e\n\n\u003ch3\u003eApplication Pitfalls \u0026amp; Engineering Notes\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eCondensation buildup is a frequent failure point inside sealed housings when exposed to cyclic thermal conditions. For optimal service life, install approved, explosion-proof breathers\/drains in the lowest conduit entry point to allow continuous moisture escape without compromising the enclosure’s safety class.\u003c\/p\u003e\n\n\u003ch3\u003eCommissioning \u0026amp; Wiring Tips\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eTo prevent common-mode noise on the transducer signals, verify that the housing is electrically bonded to the machine ground system. Ensure that the internal grounding lug is linked to the cable shield drain wire, keeping shield grounding restricted to a single point (typically the monitoring rack) to eliminate ground loop interference.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cdiv style=\"background-color: #fff5f5; border-left: 4px solid #c53030; padding: 1rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cp style=\"color: #9b2c2c; font-weight: bold; margin: 0 0 0.5rem 0;\"\u003eCRITICAL WARNING\u003c\/p\u003e\n  \u003cp style=\"color: #9b2c2c; margin: 0;\"\u003eDo not open the housing cover while the electrical circuits are energized in hazardous atmospheres. Isolate power at the source and confirm explosive gas metrics are safe before attempting installation, maintenance, or calibration adjustments.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: flex; align-items: flex-start; margin-bottom: 1rem;\"\u003e\n  \u003cspan style=\"display: inline-flex; align-items: center; justify-content: center; background-color: #2b6cb0; color: #ffffff; min-width: 24px; height: 24px; border-radius: 50%; font-weight: bold; margin-right: 0.75rem;\"\u003e1\u003c\/span\u003e\n  \u003cspan style=\"color: #2d3748;\"\u003eMount the empty housing chassis to a flat, rigid structural support close to the probe point, keeping physical vibration transfer to a minimum.\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: flex; align-items: flex-start; margin-bottom: 1rem;\"\u003e\n  \u003cspan style=\"display: inline-flex; align-items: center; justify-content: center; background-color: #2b6cb0; color: #ffffff; min-width: 24px; height: 24px; border-radius: 50%; font-weight: bold; margin-right: 0.75rem;\"\u003e2\u003c\/span\u003e\n  \u003cspan style=\"color: #2d3748;\"\u003eSecurely bolt the Proximitor sensor inside the housing using the insulated mounting plate spacer configuration.\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: flex; align-items: flex-start; margin-bottom: 1rem;\"\u003e\n  \u003cspan style=\"display: inline-flex; align-items: center; justify-content: center; background-color: #2b6cb0; color: #ffffff; min-width: 24px; height: 24px; border-radius: 50%; font-weight: bold; margin-right: 0.75rem;\"\u003e3\u003c\/span\u003e\n  \u003cspan style=\"color: #2d3748;\"\u003eRoute the coaxial cable and transmission lines through certified, threaded explosion-proof conduit seals.\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: flex; align-items: flex-start; margin-bottom: 1rem;\"\u003e\n  \u003cspan style=\"display: inline-flex; align-items: center; justify-content: center; background-color: #2b6cb0; color: #ffffff; min-width: 24px; height: 24px; border-radius: 50%; font-weight: bold; margin-right: 0.75rem;\"\u003e4\u003c\/span\u003e\n  \u003cspan style=\"color: #2d3748;\"\u003eTorque the threaded housing cover completely to engage all thread paths to maintain environmental IP rating and flameproof certification.\u003c\/span\u003e\n\u003c\/div\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666732413291,"sku":"31000-00-00-15-000-01-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-00-00-15-000-01-02-sensor-type-bv2mvbvm5jr_81f480e9-7a8f-4fdc-9b80-a0bbef0ac80b.jpg?v=1765446696"},{"product_id":"bently-nevada-21000-28-05-15-028-04-02-proximity-probe-housing-assembly","title":"Bently Nevada 21000-28-05-15-028-04-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eOptimizing sensor protection in severe industrial environments, the \u003cstrong\u003eBently Nevada 21000-28-05-15-028-04-02\u003c\/strong\u003e provides a rugged, weather-resistant enclosure specifically designed for proximity probes. This aluminum housing assembly safeguards key machinery diagnostics components, enabling precise gap adjustment and structural isolation of proximity transducers in Turbomachinery Instrumentation (TSI) setups. By isolating the sensor from aggressive external elements, it guarantees steady, reliable signal transmission back to Bently Nevada 3500 monitoring systems.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1a365d; margin-top: 1.5rem; margin-bottom: 0.5rem;\"\u003eFeatures\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Housing:\u003c\/strong\u003e Fabricated from high-grade anodized aluminum to withstand continuous exposure to industrial lubricants, moisture, and chemical vapors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable Sleeve Mechanism:\u003c\/strong\u003e Features a 2.8-inch sleeve configuration allowing precise calibration of probe-to-target physical gap clearances without dismantling the enclosure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnvironmental Rating:\u003c\/strong\u003e Meets IP66 \/ NEMA 4X requirements, providing dust-tight sealing and protection against water jets.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExplosion-Proof\/Flameproof Capability:\u003c\/strong\u003e Designed to satisfy hazardous area safety protocols when paired with certified cable glands and seals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #1a365d; margin-top: 1.5rem; margin-bottom: 0.5rem;\"\u003eApplications\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cli\u003eSteam and gas turbine shaft vibration and axial position monitoring.\u003c\/li\u003e\n  \u003cli\u003eLarge centrifugal and axial compressor protection schemes.\u003c\/li\u003e\n  \u003cli\u003eHydroelectric generator thrust and radial vibration analysis.\u003c\/li\u003e\n  \u003cli\u003ePetrochemical pump casing and bearing health tracking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #1a365d; margin-top: 1.5rem; margin-bottom: 0.5rem;\"\u003eTechnical Specifications Table\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; width: 100%; margin-bottom: 1.5rem;\"\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; color: #2d3748; border: 1px solid #2b6cb0;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"border-bottom: 2px solid #2b6cb0;\"\u003e\n        \u003cth style=\"padding: 10px; text-align: left; font-weight: bold; border: 1px solid #2b6cb0;\"\u003eParameter \/ Attribute\u003c\/th\u003e\n        \u003cth style=\"padding: 10px; text-align: left; font-weight: bold; border: 1px solid #2b6cb0;\"\u003eSpecification Value\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"border-bottom: 1px solid #2b6cb0;\"\u003e\n        \u003ctd style=\"padding: 10px; font-weight: bold; border: 1px solid #2b6cb0;\"\u003eManufacturer\u003c\/td\u003e\n        \u003ctd style=\"padding: 10px; border: 1px solid #2b6cb0;\"\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #2b6cb0;\"\u003e\n        \u003ctd style=\"padding: 10px; font-weight: bold; border: 1px solid #2b6cb0;\"\u003ePart Number\u003c\/td\u003e\n        \u003ctd style=\"padding: 10px; border: 1px solid #2b6cb0;\"\u003e21000-28-05-15-028-04-02\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #2b6cb0;\"\u003e\n        \u003ctd style=\"padding: 10px; font-weight: bold; border: 1px solid #2b6cb0;\"\u003eSeries Name\u003c\/td\u003e\n        \u003ctd style=\"padding: 10px; border: 1px solid #2b6cb0;\"\u003e21000 Series (Aluminum Housing)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #2b6cb0;\"\u003e\n        \u003ctd style=\"padding: 10px; font-weight: bold; border: 1px solid #2b6cb0;\"\u003eHousing Material\u003c\/td\u003e\n        \u003ctd style=\"padding: 10px; border: 1px solid #2b6cb0;\"\u003eAnodized Aluminum\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #2b6cb0;\"\u003e\n        \u003ctd style=\"padding: 10px; font-weight: bold; border: 1px solid #2b6cb0;\"\u003eSleeve Length Option (-028)\u003c\/td\u003e\n        \u003ctd style=\"padding: 10px; border: 1px solid #2b6cb0;\"\u003e2.8 inches (71.1 mm)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #2b6cb0;\"\u003e\n        \u003ctd style=\"padding: 10px; font-weight: bold; border: 1px solid #2b6cb0;\"\u003eIngress Protection Rating\u003c\/td\u003e\n        \u003ctd style=\"padding: 10px; border: 1px solid #2b6cb0;\"\u003eIP66 \/ NEMA 4X equivalent\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #2b6cb0;\"\u003e\n        \u003ctd style=\"padding: 10px; font-weight: bold; border: 1px solid #2b6cb0;\"\u003eProbe Compatibility\u003c\/td\u003e\n        \u003ctd style=\"padding: 10px; border: 1px solid #2b6cb0;\"\u003eStandard Bently Nevada Proximity Probes (e.g., 3300 XL 8 mm)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #2b6cb0;\"\u003e\n        \u003ctd style=\"padding: 10px; font-weight: bold; border: 1px solid #2b6cb0;\"\u003eCountry of Origin\u003c\/td\u003e\n        \u003ctd style=\"padding: 10px; border: 1px solid #2b6cb0;\"\u003eUSA\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #2b6cb0;\"\u003e\n        \u003ctd style=\"padding: 10px; font-weight: bold; border: 1px solid #2b6cb0;\"\u003eShipping Weight (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"padding: 10px; border: 1px solid #2b6cb0;\"\u003e1.90 kg (4.19 lbs)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #2b6cb0;\"\u003e\n        \u003ctd style=\"padding: 10px; font-weight: bold; border: 1px solid #2b6cb0;\"\u003ePackage Dimensions (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"padding: 10px; border: 1px solid #2b6cb0;\"\u003e26.0 cm x 16.0 cm x 16.0 cm\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3 style=\"color: #1a365d; margin-top: 1.5rem; margin-bottom: 0.5rem;\"\u003eAlternative Models \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eThe aluminum 21000 housing series serves as a metal alternative to the 21001 glass-reinforced thermoplastic housing model. When swapping components, ensure the sleeve length option matches your physical casing wall thickness and internal gap specifications. Using an mismatched sleeve length may prevent the proximity probe from reaching the target surface or risk mechanical collision with the shaft during thermal expansion.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1a365d; margin-top: 1.5rem; margin-bottom: 0.5rem;\"\u003eApplication Pitfalls \u0026amp; Engineering Notes\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThermal Considerations:\u003c\/strong\u003e Aluminum exhibits distinct expansion properties compared to heavy-duty turbine steel casings. Account for structural displacement shifts during transition states from ambient to normal operating temperature.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCondensation Control:\u003c\/strong\u003e In high-humidity installations, use proper conduit seals to prevent internal condensation build-up inside the housing junction area, which can degrade high-frequency coaxial signals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #1a365d; margin-top: 1.5rem; margin-bottom: 0.5rem;\"\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cdiv style=\"background-color: #fff5f5; border-left: 4px solid #c53030; padding: 15px; margin-bottom: 1.5rem;\"\u003e\n  \u003cstrong style=\"color: #9b2c2c; display: block; margin-bottom: 5px;\"\u003eCRITICAL WARNING\u003c\/strong\u003e\n  \u003cp style=\"color: #9b2c2c; margin: 0;\"\u003eBefore performing any installation, maintenance, or sensor adjustment, verify that the machinery is completely shut down and that all power supply paths to the associated proximity driver\/transmitter are isolated. Failure to de-energize circuits in explosive or hazardous atmospheres can result in arc-flash ignition or major equipment damage.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"margin-bottom: 1rem; display: flex; align-items: flex-start;\"\u003e\n  \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; border-radius: 50%; min-width: 24px; min-height: 24px; display: flex; align-items: center; justify-content: center; font-weight: bold; margin-right: 12px; margin-top: 2px;\"\u003e1\u003c\/div\u003e\n  \u003cp style=\"color: #2d3748; margin: 0;\"\u003eMount the housing assembly directly onto the machine casing or bracket, ensuring the matching sleeve aligns correctly with the target path.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin-bottom: 1rem; display: flex; align-items: flex-start;\"\u003e\n  \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; border-radius: 50%; min-width: 24px; min-height: 24px; display: flex; align-items: center; justify-content: center; font-weight: bold; margin-right: 12px; margin-top: 2px;\"\u003e2\u003c\/div\u003e\n  \u003cp style=\"color: #2d3748; margin: 0;\"\u003eCarefully feed the coaxial transducer cable through the internal sleeve routing, taking care to respect the minimum 25.4 mm (1.0 inch) bend radius constraint.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin-bottom: 1rem; display: flex; align-items: flex-start;\"\u003e\n  \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; border-radius: 50%; min-width: 24px; min-height: 24px; display: flex; align-items: center; justify-content: center; font-weight: bold; margin-right: 12px; margin-top: 2px;\"\u003e3\u003c\/div\u003e\n  \u003cp style=\"color: #2d3748; margin: 0;\"\u003eApply thread compound to the external casing interfaces, torque securely to OEM specifications, and close the cover seal to establish water-tight IP66 integrity.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666732446059,"sku":"21000-28-05-15-028-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-28-05-15-028-04-02-proximity-probe-housingassemblies-vxmz3y5qe5r_c6e2cd88-4307-4cf6-81bb-53ee99857a59.jpg?v=1765446697"},{"product_id":"bently-nevada-21000-28-05-00-040-04-02-21000-series-proximity-probe-housing-assembly","title":"Bently Nevada 21000-28-05-00-040-04-02 21000 Series Proximity Probe Housing Assembly","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eProtecting critical vibration and position transducers in demanding industrial environments requires robust physical shielding. The \u003cstrong\u003e21000-28-05-00-040-04-02\u003c\/strong\u003e is a heavy-duty, aluminum \u003cstrong\u003eProximity Probe Housing Assembly\u003c\/strong\u003e engineered by Bently Nevada to house and safeguard proximity probes, such as the 3300 XL series. This housing facilitates the external adjustment of the probe's relative position (gap) without requiring disassembly of the machine casing, streamlining maintenance and calibration procedures.\u003c\/p\u003e\n\n\u003cp\u003eBy enclosing the probe-to-extension cable connection, the \u003cstrong\u003e21000-28-05-00-040-04-02\u003c\/strong\u003e prevents environmental ingress from moisture, oil, dust, and corrosive process agents. It is designed to withstand the severe vibrations and mechanical stresses typical of large rotating machinery casings, ensuring continuous, high-fidelity signal transmission to monitoring systems like the Bently Nevada 3500 Series.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum Construction:\u003c\/strong\u003e Provides high structural strength and corrosion resistance while keeping the assembly lightweight.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExternal Gap Adjustment:\u003c\/strong\u003e Allows technicians to adjust probe depth and gap externally without dismantling the machine housing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnvironmental Protection:\u003c\/strong\u003e Seals the sensitive probe-to-cable connection from moisture, dust, lubricants, and contaminants.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard Conduit Interfaces:\u003c\/strong\u003e Designed with dedicated fitting ports to interface with protective conduit systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSteam and gas turbine generator sets\u003c\/li\u003e\n  \u003cli\u003eCentrifugal and axial compressors\u003c\/li\u003e\n  \u003cli\u003eLarge industrial pumps and fans\u003c\/li\u003e\n  \u003cli\u003eHydroelectric power generation units\u003c\/li\u003e\n  \u003cli\u003ePetrochemical and oil refinery rotating equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003e\u003ctd\u003eManufacturer\u003c\/td\u003e\u003c\/strong\u003e\n      \u003ctd\u003eBently Nevada\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003e\u003ctd\u003ePart Number\u003c\/td\u003e\u003c\/strong\u003e\n      \u003ctd\u003e21000-28-05-00-040-04-02\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003e\u003ctd\u003eProduct Series\u003c\/td\u003e\u003c\/strong\u003e\n      \u003ctd\u003e21000 Series\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003e\u003ctd\u003eHousing Material\u003c\/td\u003e\u003c\/strong\u003e\n      \u003ctd\u003eAnodized Aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003e\u003ctd\u003eApplication Compatibility\u003c\/td\u003e\u003c\/strong\u003e\n      \u003ctd\u003eBently Nevada Proximity Probes (e.g., 3300, 3300 XL 8mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003e\u003ctd\u003eEnvironmental Rating\u003c\/td\u003e\u003c\/strong\u003e\n      \u003ctd\u003eDesigned for IP66 \/ NEMA 4X equivalent protection when properly installed\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cstrong\u003e\u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\u003c\/strong\u003e\n      \u003ctd\u003e-40 degC to +100 degC (typical housing rating)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEnsure the mating threads on the machine casing are clean, free of debris, and match the housing specifications before installation.\u003c\/li\u003e\n  \u003cli\u003eApply thread sealant to the conduit entry ports to maintain environmental seal integrity and prevent fluid ingress.\u003c\/li\u003e\n  \u003cli\u003eDo not overtighten the probe locknut; adhere to the torque specifications provided in the Bently Nevada system manual to avoid damage to the probe sleeve.\u003c\/li\u003e\n  \u003cli\u003eVerify that the flexible conduit routing allows sufficient bend radius to prevent strain on the internal extension cables.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666732708203,"sku":"21000-28-05-00-040-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-28-05-00-040-04-02-proximity-probe-housingassemblies-gclmrk34ocr_f054ee6e-0a84-4c8c-8e6c-6d02df04c4d5.jpg?v=1765446705"}],"url":"https:\/\/www.plcprotech.com\/collections\/bently-nevada-proximity-probe-housing-assemblies.oembed?page=18","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}