{"title":"Communication \u0026 Networking","description":"\u003cp\u003eIndustrial communication and networking components provide the data paths that connect controllers, I\/O, drives, HMIs, and supervisory systems across a plant. The architecture typically includes managed or unmanaged switches, industrial Ethernet modules, protocol converters, remote I\/O adapters, wireless bridges, serial interfaces, and fiber or media accessories designed for harsh environments. Key technical characteristics include deterministic traffic support where the network design allows it, VLAN and redundancy features, EMI-resistant designs, extended temperature ratings, and compatibility with common industrial protocols and addressing schemes. Functional capability includes segmenting networks, extending distance, bridging legacy serial equipment, enabling controller-to-controller messaging, and maintaining reliable connectivity for diagnostics and data exchange. For control platforms these networks support, see \u003ca href=\"https:\/\/www.plcprotech.com\/collections\/plc-pac-systems\"\u003ePLC \u0026amp; PAC Systems\u003c\/a\u003e, and for operator endpoints, visit \u003ca href=\"https:\/\/www.plcprotech.com\/collections\/hmi-industrial-computing\"\u003eHMI \u0026amp; Industrial Computing\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"bently-nevada-3500-92-communication-gateway-modules","title":"Bently Nevada 3500\/92 Communication Gateway Modules","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe 3500\/92 communication gateway module is used to transfer monitoring data from the 3500 Machinery Protection System to external PLC, DCS, SCADA, and HMI platforms through Ethernet and serial communication interfaces. It supports Modbus TCP and Modbus RTU communication for rack measurement values, alarm statuses, and system condition monitoring.\u003c\/p\u003e\n\u003cp\u003eThe module communicates with other rack components through the internal high-speed backplane and supports RS232, RS422, and RS485 serial interfaces depending on the installed I\/O module configuration. Ethernet communication is provided through an RJ45 connection for integration with industrial control networks.\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"\"\u003e\u003ca class=\"decorated-link\" href=\"https:\/\/www.plcprotech.com\/products\/bently-nevada-3500-92-03-01-00-136188-01-ethernet-rs232-modbus-i-o-module\" target=\"_blank\"\u003e3500\/92-03-01-00 Ethernet\/RS232 Modbus I\/O Module\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eis commonly used in machinery monitoring applications where vibration protection data must be shared with plant automation systems. The\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"\"\u003e\u003ca class=\"decorated-link\" href=\"https:\/\/www.plcprotech.com\/products\/bently-nevada-136180-01-3500-92-communication-gateway-module\" target=\"_blank\"\u003e136180-01 3500\/92 Communication Gateway Module\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003esupports communication with Bently Nevada configuration and data acquisition software through proprietary Ethernet-based protocols.\u003c\/p\u003e\n\u003cp\u003eThe 3500\/92 is intended for static process variables and alarm communication. Dynamic waveform collection and transient diagnostic functions are handled separately through the 3500\/22M Transient Data Interface module.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports Modbus RTU and Modbus TCP communication\u003c\/li\u003e\n\u003cli\u003eEthernet and serial communication capability\u003c\/li\u003e\n\u003cli\u003eCompatible with PLC, DCS, SCADA, and HMI systems\u003c\/li\u003e\n\u003cli\u003eSupports RS232, RS422, and RS485 interfaces\u003c\/li\u003e\n\u003cli\u003eRJ45 Ethernet connection for 10BASE-T networks\u003c\/li\u003e\n\u003cli\u003eRack-wide measurement and alarm data access\u003c\/li\u003e\n\u003cli\u003eInternal high-speed rack communication\u003c\/li\u003e\n\u003cli\u003eSupports configurable Modbus register mapping\u003c\/li\u003e\n\u003cli\u003eCompatible with 3500 Rack Configuration Software\u003c\/li\u003e\n\u003cli\u003eHot-swappable module architecture\u003c\/li\u003e\n\u003cli\u003eFront panel communication status LEDs\u003c\/li\u003e\n\u003cli\u003eSupports redundant communication configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurbine vibration monitoring systems\u003c\/li\u003e\n\u003cli\u003eCompressor protection systems\u003c\/li\u003e\n\u003cli\u003ePower generation facilities\u003c\/li\u003e\n\u003cli\u003ePetrochemical process plants\u003c\/li\u003e\n\u003cli\u003eOil and gas rotating equipment monitoring\u003c\/li\u003e\n\u003cli\u003eIndustrial machinery protection systems\u003c\/li\u003e\n\u003cli\u003eDCS integration projects\u003c\/li\u003e\n\u003cli\u003ePLC-based machinery monitoring\u003c\/li\u003e\n\u003cli\u003eSCADA communication systems\u003c\/li\u003e\n\u003cli\u003eProcess automation networks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eCategorySpecification\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003eManufacturer\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003eProduct Type\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eCommunication Gateway Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003eModel\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003e3500\/92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003eOrigin\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003eCommunication Protocols\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003eModbus RTU, Modbus TCP\/IP, Proprietary Bently Nevada Protocol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003eEthernet Interface\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003e10BASE-T Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"8\"\u003eEthernet Connector\u003c\/td\u003e\n\u003ctd data-row=\"8\"\u003eRJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"9\"\u003eSerial Interfaces\u003c\/td\u003e\n\u003ctd data-row=\"9\"\u003eRS232, RS422, RS485\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"10\"\u003eEthernet Speed\u003c\/td\u003e\n\u003ctd data-row=\"10\"\u003e10 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"11\"\u003ePower Consumption\u003c\/td\u003e\n\u003ctd data-row=\"11\"\u003e5.0 W typical with Modbus RS232\/RS422 I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"12\"\u003ePower Consumption\u003c\/td\u003e\n\u003ctd data-row=\"12\"\u003e5.6 W typical with Modbus RS485 I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"13\"\u003eUpdate Time\u003c\/td\u003e\n\u003ctd data-row=\"13\"\u003eLess than 1 second for complete rack data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"14\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd data-row=\"14\"\u003e-30 degC to +65 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"15\"\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd data-row=\"15\"\u003e-40 degC to +85 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"16\"\u003eHumidity\u003c\/td\u003e\n\u003ctd data-row=\"16\"\u003e95% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"17\"\u003eDimensions\u003c\/td\u003e\n\u003ctd data-row=\"17\"\u003e241 mm x 24.4 mm x 242 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"18\"\u003eWeight\u003c\/td\u003e\n\u003ctd data-row=\"18\"\u003e0.82 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eConnections \/ Interfaces\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eConnector \/ InterfaceFunction\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003eRJ45 Ethernet Port\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eModbus TCP\/IP communication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003eRS232 Port\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eSerial Modbus RTU communication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003eRS422 Interface\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003eLong-distance serial communication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003eRS485 Interface\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003eMulti-drop Modbus communication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003eInternal Rack Backplane\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003eHigh-speed rack data exchange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ch4\u003e3500\/92 Communication Gateway\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eModel Structure:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3500\/92-AA-BB-CC\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eCodeDescription\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003eA\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eI\/O Module Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e01\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eModbus RS232\/RS422 I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003e02\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003eModbus RS485 I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003e03\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003eEthernet\/RS232 Modbus I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003e04\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003eEthernet\/RS485 Modbus I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003eB\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003eMemory Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"8\"\u003e01\u003c\/td\u003e\n\u003ctd data-row=\"8\"\u003eLow Memory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"9\"\u003eC\u003c\/td\u003e\n\u003ctd data-row=\"9\"\u003eAgency Approval Option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"10\"\u003e00\u003c\/td\u003e\n\u003ctd data-row=\"10\"\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"11\"\u003e01\u003c\/td\u003e\n\u003ctd data-row=\"11\"\u003eCSA\/NRTL\/C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"12\"\u003e02\u003c\/td\u003e\n\u003ctd data-row=\"12\"\u003eCSA\/ATEX\/IECEx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eAdditional Options\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003ePart NumberDescription\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e126M4118-01\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eFirmware Upgrade Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eOlder Communication Gateway modules may require a firmware upgrade before communication with newer I\/O modules. Refer to the 3500\/92 manual for compatibility details.\u003c\/p\u003e\n\u003ch3\u003eEthernet Cabling\u003c\/h3\u003e\n\u003ch4\u003eStandard 10BASE-T Shielded Category 5 Cable with RJ-45 Connectors\u003c\/h4\u003e\n\u003cp\u003eBase Model: 138131-AAA\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eCable CodeLength\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e006\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003e6 ft. (1.8 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e010\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003e10 ft. (3 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003e025\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003e25 ft. (7.3 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003e040\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e40 ft. (12 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003e050\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003e50 ft. (15 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003e075\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003e75 ft. (22.5 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"8\"\u003e085\u003c\/td\u003e\n\u003ctd data-row=\"8\"\u003e85 ft. (25.5 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"9\"\u003e100\u003c\/td\u003e\n\u003ctd data-row=\"9\"\u003e100 ft. (30.5 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"10\"\u003e120\u003c\/td\u003e\n\u003ctd data-row=\"10\"\u003e120 ft. (36.6 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"11\"\u003e150\u003c\/td\u003e\n\u003ctd data-row=\"11\"\u003e150 ft. (44.8 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"12\"\u003e200\u003c\/td\u003e\n\u003ctd data-row=\"12\"\u003e200 ft. (61 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"13\"\u003e250\u003c\/td\u003e\n\u003ctd data-row=\"13\"\u003e250 ft. (75 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"14\"\u003e320\u003c\/td\u003e\n\u003ctd data-row=\"14\"\u003e320 ft. (98 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFor custom cable lengths, ordering is available through Bently Nevada Custom Products.\u003c\/p\u003e\n\u003ch3\u003eSerial Cabling (RS232)\u003c\/h3\u003e\n\u003ch4\u003eRS232 Cable, Host to 3500\/92\u003c\/h4\u003e\n\u003cp\u003eModel: 130419-AAAA-BB\u003c\/p\u003e\n\u003ch5\u003eCable Length\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eCodeLength\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e0010\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003e10 ft. (3 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e0025\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003e25 ft. (7.5 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003e0050\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003e50 ft. (15 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003e0100\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e100 ft. (30.5 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eAssembly Instructions\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eCodeDescription\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e01\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eNot Assembled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e02\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eAssembled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eRS232 Cable, Honeywell PLCG to 3500\/92\u003c\/h4\u003e\n\u003cp\u003eModel: 130420-AAAA-BB\u003c\/p\u003e\n\u003ch5\u003eCable Length\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eCodeLength\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e0010\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003e10 ft. (3 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e0025\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003e25 ft. (7.5 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003e0050\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003e50 ft. (15 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003e0100\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e100 ft. (30.5 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eAssembly Instructions\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eCodeDescription\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e01\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eNot Assembled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e02\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eAssembled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003ePart NumberDescription\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e130119-01\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eRS232 Cable, Host Computer to RS232\/RS422 Converter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSerial Cabling (RS422 \/ RS485)\u003c\/h3\u003e\n\u003cp\u003eRS422 cables can be used for rack-to-rack connections when using Modbus RS485 I\/O modules.\u003c\/p\u003e\n\u003ch4\u003eRS422 PVC Insulated Cable, RS232\/RS422 Converter to 3500\/92\u003c\/h4\u003e\n\u003cp\u003eModel: 130530-AAAA-BB\u003c\/p\u003e\n\u003ch4\u003eRS422 PVC Insulated Cable, 3500\/92 to 3500\/92\u003c\/h4\u003e\n\u003cp\u003eModel: 129665-AAAA-BB\u003c\/p\u003e\n\u003ch4\u003eRS422 Teflon Insulated Cable, RS232\/RS422 Converter to 3500\/92\u003c\/h4\u003e\n\u003cp\u003eModel: 131109-AAAA-BB\u003c\/p\u003e\n\u003ch4\u003eRS422 Teflon Insulated Cable, 3500\/92 to 3500\/92\u003c\/h4\u003e\n\u003cp\u003eModel: 131108-AAAA-BB\u003c\/p\u003e\n\u003ch5\u003eCable Length Options\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eCodeLength\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e0010\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003e10 ft. (3 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e0025\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003e25 ft. (7.5 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003e0050\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003e50 ft. (15 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003e0100\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e100 ft. (30.5 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003e0250\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003e250 ft. (75 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003e0500\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003e500 ft. (150 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eAssembly Instructions\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eCodeDescription\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e01\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eNot Assembled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e02\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eAssembled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eRS422 \/ RS485 Extension Cable\u003c\/h4\u003e\n\u003cp\u003eModel: 130531-AA-BB\u003c\/p\u003e\n\u003cp\u003eUsed with cable assemblies 130530, 129665, 131109, and 131108 for installations exceeding 500 ft. (152 meters).\u003c\/p\u003e\n\u003ch5\u003eAssembly Instructions\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eCodeDescription\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e01\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eNot Assembled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e02\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eAssembled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eInsulation Type\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eCodeDescription\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e01\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003ePVC Insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e02\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eTeflon Insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe total RS485 cable run can reach up to 4000 ft. (1220 meters).\u003c\/p\u003e\n\u003cp\u003eThe total RS422 cable run can reach up to 4000 ft. (1220 meters) between racks.\u003c\/p\u003e\n\u003ch3\u003eSpare Parts\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003ePart NumberDescription\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e04425545\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eGrounding Wrist Strap (single use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e137495-01\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eFirmware IC (Odd bank)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003e137494-01\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003eFirmware IC (Even bank)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003e136180-01\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e3500\/92 Communication Gateway Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003e125736-01\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003eModbus RS232\/RS422 I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003e133323-01\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003eModbus RS485 I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"8\"\u003e136188-01\u003c\/td\u003e\n\u003ctd data-row=\"8\"\u003eEthernet\/RS232 Modbus I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"9\"\u003e136188-02\u003c\/td\u003e\n\u003ctd data-row=\"9\"\u003eEthernet\/RS485 Modbus I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"10\"\u003eBently Manuals International Technical Documentation DVD\u003c\/td\u003e\n\u003ctd data-row=\"10\"\u003eDocumentation Media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eAccessories\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003ePart NumberDescription\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e139036-01\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003e9-pin D-SUB \"Y\" Serial Converters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e02230411\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eRS232 to RS422 Converter - 110 Vac\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003e02230412\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003eRS232 to RS422 Converter - 220 Vac\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003e165M2516\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e24-port 100\/1000 SFP BE Based Switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEthernet Transceivers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003ePart NumberDescription\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e02200260\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003e15-Pin AUI Male to Fiber Optic Cable (10BASE-FL) with ST Connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e02200261\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003e15-Pin AUI Male to Thinnet (10BASE2) Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard Ethernet Cabling\u003c\/h3\u003e\n\u003ch4\u003e10BASE-T Shielded Category 5 Cable with RJ-45 Connectors\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003ePart NumberCable Length\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e02175190\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003e6 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e02175191\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003e10 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003e02175192\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003e25 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666764624235,"sku":"3500\/92","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-3500-92-communication-gateway-51o3zdgfljb_e1a39a26-bfe1-4ee3-8a8d-ce075dca0955.jpg?v=1765447201"},{"product_id":"bently-nevada-136180-01-3500-92-communication-gateway-module","title":"Bently Nevada 136180-01 3500\/92 Communication Gateway Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 136180-01 3500\/92 Communication Gateway Module\u003c\/strong\u003e provides communication integration between the 3500 machinery protection system and external process control or automation platforms. The module supports both Ethernet TCP\/IP and serial communication interfaces for transferring monitored values, alarm statuses, module statuses, and system data from the 3500 rack.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e3500\/92 Communication Gateway Module\u003c\/strong\u003e supports Modicon Modbus protocol through serial communication interfaces including RS232, RS422, and RS485. It also supports Modbus\/TCP communication over Ethernet networks and proprietary Bently Nevada communication protocols for use with 3500 Rack Configuration Software and Data Acquisition Software.\u003c\/p\u003e\n\u003cp\u003eThe module communicates with other rack modules through the internal high-speed 3500 rack network. Collected data may include current measured values with time stamps, module health information, and alarm conditions depending on installed module configuration.\u003c\/p\u003e\n\u003cp\u003eThe Ethernet interface uses an RJ45 connection designed for 10BASE-T Ethernet networks conforming to IEEE802.3 standards. The module supports configurable Modbus register mapping through the Configurable Modbus Register Utility.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports Ethernet TCP\/IP communication\u003c\/li\u003e\n\u003cli\u003eSupports RS232, RS422, and RS485 serial interfaces\u003c\/li\u003e\n\u003cli\u003eCompatible with Modbus and Modbus\/TCP protocols\u003c\/li\u003e\n\u003cli\u003eSupports proprietary Bently Nevada communication protocol\u003c\/li\u003e\n\u003cli\u003eRJ45 Ethernet connection for 10BASE-T networks\u003c\/li\u003e\n\u003cli\u003eInternal high-speed rack communication\u003c\/li\u003e\n\u003cli\u003eConfigurable Modbus register mapping\u003c\/li\u003e\n\u003cli\u003eCommunication with 3500 Rack Configuration Software\u003c\/li\u003e\n\u003cli\u003eCommunication with 3500 Data Acquisition Software\u003c\/li\u003e\n\u003cli\u003eRack monitored value and status integration\u003c\/li\u003e\n\u003cli\u003eFront-panel OK and TX\/RX status LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMachinery protection system integration\u003c\/li\u003e\n\u003cli\u003eTurbine monitoring systems\u003c\/li\u003e\n\u003cli\u003eDistributed control system communication\u003c\/li\u003e\n\u003cli\u003eProcess automation integration\u003c\/li\u003e\n\u003cli\u003ePower generation monitoring\u003c\/li\u003e\n\u003cli\u003eIndustrial condition monitoring\u003c\/li\u003e\n\u003cli\u003eData acquisition systems\u003c\/li\u003e\n\u003cli\u003ePlant-wide monitoring networks\u003c\/li\u003e\n\u003cli\u003eSCADA communication systems\u003c\/li\u003e\n\u003cli\u003eVibration monitoring infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003e136180-01: 3500\/92 Communication Gateway Module.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eCategorySpecification\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003eManufacturer\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003eProduct Type\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eCommunication Gateway Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003ePart Number\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003e136180-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003ePower Consumption\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e5.0 Watts typical with Modbus RS232\/RS422 I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003ePower Consumption\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003e5.6 Watts typical with Modbus RS485 I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003eData Collection\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003eMeasured values, module statuses, alarm statuses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"8\"\u003eUpdate Time\u003c\/td\u003e\n\u003ctd data-row=\"8\"\u003eWill not exceed 1 second for all modules in the 3500 rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"9\"\u003eEthernet Speed\u003c\/td\u003e\n\u003ctd data-row=\"9\"\u003e10 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"10\"\u003eEthernet Standard\u003c\/td\u003e\n\u003ctd data-row=\"10\"\u003eIEEE802.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"11\"\u003eEthernet Protocol\u003c\/td\u003e\n\u003ctd data-row=\"11\"\u003eEthernet TCP\/IP and Modbus\/TCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"12\"\u003eEthernet Connection\u003c\/td\u003e\n\u003ctd data-row=\"12\"\u003eRJ-45 for 10BASE-T Ethernet cabling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"13\"\u003eSupported Serial Interfaces\u003c\/td\u003e\n\u003ctd data-row=\"13\"\u003eRS232, RS422, RS485\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"14\"\u003eSupported Protocols\u003c\/td\u003e\n\u003ctd data-row=\"14\"\u003eModbus RTU, Modbus\/TCP, Bently Nevada protocol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"15\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd data-row=\"15\"\u003e-30 degC to +65 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"16\"\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd data-row=\"16\"\u003e-40 degC to +85 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"17\"\u003eHumidity\u003c\/td\u003e\n\u003ctd data-row=\"17\"\u003e95% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"18\"\u003eDimensions\u003c\/td\u003e\n\u003ctd data-row=\"18\"\u003e241 mm x 24.4 mm x 242 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"19\"\u003eWeight\u003c\/td\u003e\n\u003ctd data-row=\"19\"\u003e0.82 kg (1.8 lb.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"20\"\u003eIndicators\u003c\/td\u003e\n\u003ctd data-row=\"20\"\u003eOK LED, TX\/RX LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"21\"\u003eMain Board Dimensions\u003c\/td\u003e\n\u003ctd data-row=\"21\"\u003e241 mm x 24.4 mm x 242 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"22\"\u003eOrigin\u003c\/td\u003e\n\u003ctd data-row=\"22\"\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eConnections \/ Interfaces\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003eConnector PinFunction\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003eRJ45 Port\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eEthernet TCP\/IP communication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003eRS232 Interface\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eSerial Modbus communication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003eRS422 Interface\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003eSerial Modbus communication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003eRS485 Interface\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003eMulti-drop serial Modbus communication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003eOK LED\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003eModule operational status indication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003eTX\/RX LED\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003eCommunication activity indication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the module in a compatible 3500 rack slot.\u003c\/li\u003e\n\u003cli\u003eVerify proper rack grounding before energizing the system.\u003c\/li\u003e\n\u003cli\u003eUse shielded communication cables for serial interfaces.\u003c\/li\u003e\n\u003cli\u003eSeparate communication wiring from high-voltage power cables.\u003c\/li\u003e\n\u003cli\u003eMaintain proper Ethernet cable routing to reduce EMI interference.\u003c\/li\u003e\n\u003cli\u003eConfirm network configuration before connecting to automation systems.\u003c\/li\u003e\n\u003cli\u003eEnsure adequate ventilation inside the rack enclosure.\u003c\/li\u003e\n\u003cli\u003eAvoid excessive humidity or condensation exposure.\u003c\/li\u003e\n\u003cli\u003eTighten communication connectors securely during installation.\u003c\/li\u003e\n\u003cli\u003eUse appropriate communication termination practices for RS485 networks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ecNRTLus\u003c\/li\u003e\n\u003cli\u003eATEX\u003c\/li\u003e\n\u003cli\u003eIECEx\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the primary function of this module?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt provides communication between the 3500 rack and external automation or control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich communication protocols are supported?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module supports Modbus RTU, Modbus\/TCP, and proprietary Bently Nevada protocols.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the module support Ethernet communication?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It supports Ethernet TCP\/IP communication over 10BASE-T networks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat Ethernet connector type is used?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ethernet connection uses an RJ45 interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich serial communication interfaces are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRS232, RS422, and RS485 interfaces are supported.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the module communicate with SCADA systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It can integrate with SCADA and process control systems using Modbus protocols.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat data can be collected from the rack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module can collect measured values, module statuses, and alarm statuses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum update time for rack data?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe update time does not exceed 1 second for all rack modules.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat software is compatible with this gateway module?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt supports 3500 Rack Configuration Software and Data Acquisition Software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED indicators are available on the module?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module includes OK and TX\/RX status LEDs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the operating temperature range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe operating range is -30 degC to +65 degC.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the module support Modbus\/TCP?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Modbus\/TCP communication is supported through Ethernet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan RS485 be used for multi-device communication?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. RS485 supports multi-drop communication networks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat rack system is this module designed for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is designed for the Bently Nevada 3500 machinery protection system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the module suitable for industrial monitoring networks?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It is intended for industrial monitoring and automation integration applications.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666861027691,"sku":"3500\/92 136180-01","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-3500-92-136180-01-communication-gateway-modules-jg544a3ztna_9bc14a04-52ec-426d-90af-06d1189ef262.jpg?v=1765449298"},{"product_id":"honeywell-k2lcn-4-51402615-400-tdc-3000-local-control-network-module","title":"Honeywell K2LCN-4 51402615-400 TDC 3000 Local Control Network Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Honeywell K2LCN-4 (part number 51402615-400) is a specialized printed circuit board module engineered for deployment within Honeywell TDC 3000 distributed control systems. This LCN (Local Control Network) board acts as a high-capacity communication and processing node, facilitating deterministic data exchange between process controllers, operator stations, and history modules across the plant network architecture.\u003c\/p\u003e\n\u003cp\u003eDesigned for integration into native TDC 3000 node chassis slots, the K2LCN-4 module executes complex control tasks, manages network traffic, and maintains high-speed data integrity across critical industrial process loops. Its architecture supports the memory and processing requirements needed to handle extensive node databases and real-time supervisory control strategies.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered specifically for Honeywell TDC 3000 Local Control Network (LCN) node architecture\u003c\/li\u003e\n  \u003cli\u003eProvides high-speed data communication routing between system nodes and operator interfaces\u003c\/li\u003e\n  \u003cli\u003eFeatures 4 megawords of onboard memory capacity for database and processing execution\u003c\/li\u003e\n  \u003cli\u003eDirect slot-in integration into standard TDC 3000 node chassis backplanes\u003c\/li\u003e\n  \u003cli\u003eBuilt with industrial-grade electronic components to support continuous plant operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTDC 3000 distributed control system network expansion and node replacement\u003c\/li\u003e\n  \u003cli\u003eProcess control data routing between Universal Stations and Process Managers\u003c\/li\u003e\n  \u003cli\u003eLegacy DCS infrastructure maintenance and hardware lifecycle management\u003c\/li\u003e\n  \u003cli\u003eReal-time supervisory data exchange in continuous process manufacturing environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBrand\u003c\/td\u003e\n      \u003ctd\u003eHoneywell\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModel \/ Part Number\u003c\/td\u003e\n      \u003ctd\u003eK2LCN-4 \/ 51402615-400\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003ePCB Card \/ Local Control Network Module\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSystem Family\u003c\/td\u003e\n      \u003ctd\u003eHoneywell TDC 3000\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMemory Capacity\u003c\/td\u003e\n      \u003ctd\u003e4 Megawords\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCommunication Service\u003c\/td\u003e\n      \u003ctd\u003eLCN Ethernet \/ Peer-to-Peer Routing\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUnited States\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52667737244011,"sku":"K2LCN-4 51402615-400","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/honeywell-k2lcn-4-51402615-400-pcb-card-3pl4edftor1_a7c10466-7758-41d9-8d12-64dbf4d44ffc.jpg?v=1765501342"},{"product_id":"honeywell-51304685-150-tdc-3000-advanced-communications-card","title":"Honeywell 51304685-150 TDC 3000 Advanced Communications Card","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Honeywell 51304685-150 is a specialized Advanced Communications Card engineered for deployment within Honeywell TDC 3000 distributed control system (DCS) architectures. This hardware module provides high-performance data routing and communication management capabilities, facilitating reliable information exchange between controllers, operator stations, and networked field devices. By supporting robust industrial networking protocols, it helps maintain uninterrupted data flow across complex process control environments.\u003c\/p\u003e\n\u003cp\u003eDesigned for mission-critical industrial automation tasks, this communication card integrates directly into standard TDC 3000 node housings and module slots. It handles demanding network traffic loads while maintaining determinism and low latency, which are essential requirements for continuous process control, supervisory monitoring, and plant-wide integration in industries such as chemical processing, oil and gas refining, and power generation.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered specifically for Honeywell TDC 3000 distributed control system architectures\u003c\/li\u003e\n  \u003cli\u003eProvides advanced communication routing and network management functions\u003c\/li\u003e\n  \u003cli\u003eSupports stable data exchange between system nodes and connected subsystems\u003c\/li\u003e\n  \u003cli\u003eStandard form factor designed for direct rack or chassis mounting within DCS cabinets\u003c\/li\u003e\n  \u003cli\u003eBuilt for continuous operation in demanding industrial processing environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDistributed control system (DCS) networking and node communication\u003c\/li\u003e\n  \u003cli\u003eContinuous process manufacturing and supervisory control\u003c\/li\u003e\n  \u003cli\u003eOil and gas extraction, pipeline monitoring, and petroleum refining\u003c\/li\u003e\n  \u003cli\u003ePower generation plant automation and turbine monitoring\u003c\/li\u003e\n  \u003cli\u003eChemical and petrochemical processing facilities\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eHoneywell\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExact Model \/ Part Number\u003c\/td\u003e\n      \u003ctd\u003e51304685-150\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eAdvanced Communications Card\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n      \u003ctd\u003eHoneywell TDC 3000 Series\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrimary Function\u003c\/td\u003e\n      \u003ctd\u003eEthernet \/ network communication routing\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUnited States\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e2.9 x 31.8 x 27.8 cm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight\u003c\/td\u003e\n      \u003ctd\u003e0.60 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eVerify that the part number 51304685-150 matches your system architecture requirements before installation.\u003c\/li\u003e\n  \u003cli\u003eEnsure all power to the target TDC 3000 cabinet slot or node chassis is safely de-energized and locked out.\u003c\/li\u003e\n  \u003cli\u003eInspect the card and edge connectors for any signs of shipping damage or electrostatic contamination.\u003c\/li\u003e\n  \u003cli\u003eCarefully slide the communication card into the designated slot, ensuring proper alignment with the backplane connector.\u003c\/li\u003e\n  \u003cli\u003eSecure any retention mechanisms and connect network cabling to the appropriate interface ports.\u003c\/li\u003e\n  \u003cli\u003eRestore power to the chassis and verify proper module initialization and communication status via the system diagnostics console.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52667741307243,"sku":"51304685-150","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/honeywell-51304685-150-advanced-communications-card-ieqnr3vd2od_8938411b-4091-45a1-b2ab-d148a4e38a27.jpg?v=1765501408"},{"product_id":"honeywell-k2lcn-8-51401551-801-local-control-network-module","title":"Honeywell K2LCN-8 51401551-801 Local Control Network Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Honeywell K2LCN-8 51401551-801 is a Local Control Network (LCN) module engineered for integration within Honeywell TDC 3000 distributed control system (DCS) architectures. This hardware component serves as a critical networking interface, facilitating high-speed communication and data exchange between nodes within the local control network environment.\u003c\/p\u003e\n\u003cp\u003eDesigned for continuous industrial operation, the K2LCN-8 module supports robust plant-wide supervision, operator station connectivity, and controller communication. It maintains deterministic data transmission across the LCN architecture, ensuring that time-critical process control data and operator commands are delivered reliably between distributed system elements.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered specifically for Honeywell TDC 3000 distributed control system networks\u003c\/li\u003e\n  \u003cli\u003eProvides reliable data communication across the Local Control Network (LCN) infrastructure\u003c\/li\u003e\n  \u003cli\u003eSupports real-time process monitoring, control data routing, and operator interface integration\u003c\/li\u003e\n  \u003cli\u003eBuilt to industrial environmental specifications for continuous, mission-critical plant operation\u003c\/li\u003e\n  \u003cli\u003eStandard rack-mountable form factor designed for secure installation within Honeywell DCS enclosures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePetroleum refining and petrochemical processing plants\u003c\/li\u003e\n  \u003cli\u003eChemical manufacturing and continuous process facilities\u003c\/li\u003e\n  \u003cli\u003ePower generation and utility distribution systems\u003c\/li\u003e\n  \u003cli\u003ePulp, paper, and heavy industrial automation architectures utilizing TDC 3000 systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eHoneywell\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Model\u003c\/td\u003e\n      \u003ctd\u003eK2LCN-8\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePart Number\u003c\/td\u003e\n      \u003ctd\u003e51401551-801\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eLocal Control Network Module\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSystem Family\u003c\/td\u003e\n      \u003ctd\u003eTDC 3000 DCS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCommunication Type\u003c\/td\u003e\n      \u003ctd\u003eLocal Control Network (LCN)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUnited States\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eVerify that the Honeywell K2LCN-8 51401551-801 part number matches system engineering documentation prior to installation.\u003c\/li\u003e\n  \u003cli\u003eDe-energize the target rack and associated power supplies before handling system hardware.\u003c\/li\u003e\n  \u003cli\u003eInspect the module connectors and backplane pins for any debris, damage, or bent pins.\u003c\/li\u003e\n  \u003cli\u003eMount the module securely into the designated slot within the TDC 3000 system chassis, ensuring proper alignment with the backplane.\u003c\/li\u003e\n  \u003cli\u003eFasten any retaining screws or locking mechanisms according to hardware specifications.\u003c\/li\u003e\n  \u003cli\u003eRestore power and verify network communication status through the system management interface.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52667746419051,"sku":"K2LCN-8 51401551-801","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/honeywell-k2lcn-8-51401551-801-local-control-network-module-wfk15y1x1ef_a0f7ba1a-1b1c-4f0b-81eb-c256a2ff4f24.jpg?v=1765501489"},{"product_id":"honeywell-51109693-100b-universal-control-network-ucn-4-port-drop-cable-tap-ground-module","title":"Honeywell 51109693-100B Universal Control Network (UCN) 4-Port Drop Cable Tap Ground Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHoneywell 51109693-100B\u003c\/strong\u003e is a specialized network interface components designed for the Universal Control Network (UCN) within legacy TotalPlant Solution (TPS) and TDC 3000 Distributed Control Systems (DCS). This module serves as a ruggedized \u003cstrong\u003e4-port drop cable tap ground block\u003c\/strong\u003e, facilitating secure coax interface coupling and precise grounding infrastructure for critical high-speed control data lines.\u003c\/p\u003e\n\u003cp\u003eEngineered strictly for harsh industrial control environments, the \u003cstrong\u003e51109693-100B\u003c\/strong\u003e establishes robust branch connections from the primary UCN trunk line to individual nodes such as High-Performance Process Managers (HPM), Network Interface Modules (NIM), or Advanced Process Managers (APM). By providing high-integrity shielding terminations and static discharge paths, the module actively prevents common-mode noise propagation, ground-loop disruptions, and signal attenuation along the network segment. Its industrial-grade passive architecture ensures uninterrupted physical layer operations and uniform impedance matching necessary for continuous multi-node industrial process synchronization.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFeatures an integrated \u003cstrong\u003e4-port drop cable connection\u003c\/strong\u003e infrastructure enabling dual or multi-node transceiver drops from a localized point.\u003c\/li\u003e\n\u003cli\u003eIncorporates a dedicated low-resistance grounding bus bar interface to drain induced EMI\/RFI interference away from coax cores.\u003c\/li\u003e\n\u003cli\u003eMaintains strict physical layer attenuation parameters to ensure signal integrity across extended TDC 3000 network topologies.\u003c\/li\u003e\n\u003cli\u003eDesigned with heavy-duty cast aluminum or specialized shielding material to shield inner high-frequency junctions from ambient industrial noise.\u003c\/li\u003e\n\u003cli\u003eEmploys tight-tolerance BNC or specialized coax termination mechanisms minimizing insertion losses and reflection coefficients.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDistributed Control System (DCS) physical layer installation in petrochemical plants and oil refineries running Honeywell TDC 3000 \/ TPS platforms.\u003c\/li\u003e\n\u003cli\u003eSpecialized grounding and drop distribution for high-reliability communications between HPM subsystems and Network Interface Modules (NIM).\u003c\/li\u003e\n\u003cli\u003ePower generation utility networks requiring isolated and noise-immune fieldbus topologies across long physical distances.\u003c\/li\u003e\n\u003cli\u003ePulp, paper, and heavy manufacturing processing lines utilizing legacy coaxial-based corporate process control infrastructures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e51109693-100B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlternative Part Identifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e51201395-100 Kit Reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDevice Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal Control Network (UCN) Drop Cable Tap Ground Block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePort Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4-Port Distribution \/ Drop Capacity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork Interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCoaxial Cable Trunk Line Drop Tap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePhysical Dimensions (H x W x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12.0 cm x 9.8 cm x 4.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.24 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHousing Construction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-density shielded industrial enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eConnections\/Interfaces\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eConnector Pin\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTrunk In\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrimary Coaxial UCN Cable Input Segment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTrunk Out\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eContinuous Primary Coaxial UCN Cable Output Continuation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrop Port 1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNode Branch Drop Line Connection 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrop Port 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNode Branch Drop Line Connection 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrop Port 3\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNode Branch Drop Line Connection 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrop Port 4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNode Branch Drop Line Connection 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGND Stud\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMain Earth Reference Low-Impedance Grounding Connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding Requirements\u003c\/strong\u003e: Secure the main external ground lug directly to the local instrumentation clean ground bus bar via a low-impedance braided copper strap. Avoid chaining ground paths across multiple separate mechanical frames.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding and EMI Isolation\u003c\/strong\u003e: Ensure complete coaxial outer shield continuity through the terminal clamps to prevent RF leakage and high-frequency common-mode industrial noise entry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing Precautions\u003c\/strong\u003e: Route incoming and outgoing trunk cables through dedicated low-voltage data conduits, maintaining a minimum 300mm clearance from high-voltage AC supply lines or variable frequency drive outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop Cable Bend Radius\u003c\/strong\u003e: Adhere strictly to the OEM coax specifications regarding minimum bend radii during installation inside local field marshaling panels to prevent structural dielectric deformation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the core function of the 51109693-100B within a Honeywell DCS network?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module acts as a localized 4-port drop junction and signal grounding block on the Universal Control Network, linking primary coax trunks to node transceivers without degrading impedance characteristics.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this unit require external active power loops to run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, this is an entirely passive mechanical and electrical interface unit designed for signal division, impedance maintenance, and grounding mitigation across coaxial lines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCan unused drop ports be left open during active system runtime?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, all unused drop terminals on active network lines should be fitted with compatible high-frequency impedance terminators to avoid signal reflections and potential frame corruption errors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounting orientation is ideal for maximizing environmental resilience?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module should be mounted inside a dust-proof NEMA\/IP-rated control enclosure, preferably with the drop connectors facing downwards to avoid moisture ingress or debris accumulation within the female barrels.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52667749532011,"sku":"51109693-100B","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/honeywell-51109693-100b-bracket-un3vk2whkyz_3aa2fb77-65e2-41d3-9b7d-adeb1d10bc9a.jpg?v=1765501531"},{"product_id":"honeywell-51195153-001-experion-pks-communication-cable","title":"Honeywell 51195153-001 Experion PKS Communication Cable","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Honeywell 51195153-001 is a specialized communication cable designed for industrial control network architectures within the Experion PKS distributed control system. This hardware component facilitates reliable data transmission and network connectivity between system nodes and controllers, ensuring deterministic communication across process automation environments.\u003c\/p\u003e\n\u003cp\u003eEngineered for industrial deployment, this cable maintains signal integrity in demanding plant-floor conditions, resisting electromagnetic interference and mechanical stress. It integrates directly into standard Honeywell DCS architectures to support robust control network layouts.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered specifically for Honeywell Experion PKS control network environments\u003c\/li\u003e\n  \u003cli\u003eRobust industrial construction designed to withstand plant-floor electromagnetic interference\u003c\/li\u003e\n  \u003cli\u003ePrecision-terminated connectors ensuring secure, reliable data links between system hardware\u003c\/li\u003e\n  \u003cli\u003eSupports continuous, deterministic communication for critical process automation loops\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eExperion PKS distributed control system network expansion and maintenance\u003c\/li\u003e\n  \u003cli\u003eInterconnecting system nodes, controllers, and communication interfaces\u003c\/li\u003e\n  \u003cli\u003eIndustrial process control and automation infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eHoneywell\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExact Model\u003c\/td\u003e\n      \u003ctd\u003e51195153-001\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eCommunication Cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSystem Family\u003c\/td\u003e\n      \u003ctd\u003eExperion PKS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUnited States\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight\u003c\/td\u003e\n      \u003ctd\u003e0.08 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e20 x 14.5 x 3 cm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eVerify that the part number 51195153-001 matches your system documentation and network layout requirements.\u003c\/li\u003e\n  \u003cli\u003eEnsure all connected segments of the Experion PKS network are powered down before handling network cabling.\u003c\/li\u003e\n  \u003cli\u003eInspect the cable connectors for any physical damage, bent pins, or debris prior to installation.\u003c\/li\u003e\n  \u003cli\u003eRoute the cable safely away from high-voltage power lines and sources of severe thermal stress.\u003c\/li\u003e\n  \u003cli\u003eSecurely plug each end into the designated communication ports until locking mechanisms engage fully.\u003c\/li\u003e\n  \u003cli\u003ePower up the network nodes and verify proper communication status through the Experion monitoring software.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52667749859691,"sku":"51195153-001","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/honeywell-51195153-001-cable-and-wire-1ykz5goef4v_06a51438-61a5-49cf-b82a-8f216f1cded8.jpg?v=1765501536"},{"product_id":"honeywell-8c-ip0102-51454362-275-series-8-profibus-gateway-module","title":"Honeywell 8C-IP0102 51454362-27 Experion LX Series 8 PROFIBUS Gateway Module Coated","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHoneywell 8C-IP0102\u003c\/strong\u003e (Part Number: \u003cstrong\u003e51454362-275\u003c\/strong\u003e) is a conformally coated PROFIBUS Gateway Module (PGM) engineered for the Experion LX Series 8 Distributed Control System (DCS) platform. Supplied complete with its dedicated \u003cstrong\u003e8C-TPOXA1\u003c\/strong\u003e Input Output Termination Assembly (IOTA) base, this gateway system serves as an industrial communication interface connecting PROFIBUS DP field networks directly into the Series 8 control architecture. The module handles high-speed protocol translation and data routing between field instrumentation, motor control centers (MCC), variable frequency drives (VFD), or remote I\/O subsystems and the higher-level controller network.\u003c\/p\u003e\n\u003cp\u003eDesigned for demanding process environments, both the \u003cstrong\u003e8C-IP0102\u003c\/strong\u003e gateway module and the \u003cstrong\u003e8C-TPOXA1\u003c\/strong\u003e IOTA base feature factory-applied conformal coating to protect internal electronic components against airborne contaminants, corrosive atmospheres, and moisture. The complete assembly mounts securely inside standard control enclosures, drawing regulated 24 VDC system power via the cabinet power distribution bus while providing redundant Fault Tolerant Ethernet (FTE) interfaces for high-availability control-level networking.\u003c\/p\u003e\n\u003cp\u003eOperating as a unified communication gateway, the \u003cstrong\u003eHoneywell 8C-IP0102\u003c\/strong\u003e set enables bi-directional process data transfer, device status reporting, and fieldbus diagnostics. Integrated status indicators on the module faceplate allow maintenance personnel to quickly verify power status, operational modes, and communication activity during standard operation or field troubleshooting.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete hardware set combining the \u003cstrong\u003e8C-IP0102\u003c\/strong\u003e module and matching \u003ca href=\"\/products\/honeywell-8c-tpoxa1-51307153-175-experion-series-8-profibus-gateway-iota-coated\"\u003e8C-TPOXA1\u003c\/a\u003e IOTA base.\u003c\/li\u003e\n\u003cli\u003eFactory-applied conformal coating across all board assemblies for harsh environment protection.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for seamless integration into Experion LX Series 8 DCS architectures.\u003c\/li\u003e\n\u003cli\u003eDedicated PROFIBUS DP gateway interface supporting high-speed fieldbus device networks.\u003c\/li\u003e\n\u003cli\u003eDual RJ-45 Fault Tolerant Ethernet (FTE) ports on the IOTA base for high-availability communication.\u003c\/li\u003e\n\u003cli\u003eIntegrated front faceplate LED status indicators for power, CPU status, and bus network diagnostics.\u003c\/li\u003e\n\u003cli\u003eHot-swappable module design enabling physical unit replacement without disturbing field or network wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInterfacing PROFIBUS DP motor control centers (MCC) and variable frequency drives (VFD) to Series 8 control strategies.\u003c\/li\u003e\n\u003cli\u003eConnecting third-party smart field transmitters, gas chromatographs, and discrete I\/O racks to Experion LX.\u003c\/li\u003e\n\u003cli\u003eIntegrating complex skid-based package automation into unified DCS supervisory control systems.\u003c\/li\u003e\n\u003cli\u003eHeavy industrial and offshore installations requiring conformally coated electronics against corrosive gases.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGateway Module Part Number\u003c\/td\u003e\n\u003ctd\u003e51454362-275\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGateway Module Model\u003c\/td\u003e\n\u003ctd\u003e8C-IP0102\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatching IOTA Base Part Number\u003c\/td\u003e\n\u003ctd\u003e8C-TPOXA1 (\u003ca href=\"\/products\/honeywell-8c-tpoxa1-51307153-175-experion-series-8-profibus-gateway-iota-coated\" title=\"8C-TPOXA1 51307153-175 Gateway IOTA\"\u003eLearn more\u003c\/a\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Platform\u003c\/td\u003e\n\u003ctd\u003eExperion LX Series 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003ePROFIBUS Gateway Module Set (PGM + IOTA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhysical Protection\u003c\/td\u003e\n\u003ctd\u003eConformal Coated (Module \u0026amp; Base)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Input Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Input Current\u003c\/td\u003e\n\u003ctd\u003e430 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 degC to +60 degC (32 degF to +140 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40 degC to +85 degC (-40 degF to +185 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003e5% to 95% (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibration (Sinusoidal)\u003c\/td\u003e\n\u003ctd\u003e10-57 Hz: 0.075 mm displacement; 57-150 Hz: 1 G acceleration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock\u003c\/td\u003e\n\u003ctd\u003e15 G peak for 11 ms duration (across 3 axes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Accessories Included\u003c\/td\u003e\n\u003ctd\u003e8C-TPOXA1 PROFIBUS Gateway IOTA Base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm that the cabinet environment satisfies operating conditions: ambient temperature between 0 degC and +60 degC and relative humidity between 5% and 95% non-condensing.\u003c\/li\u003e\n\u003cli\u003eSecurely mount the \u003cstrong\u003e8C-TPOXA1\u003c\/strong\u003e IOTA base onto the cabinet DIN rail or mounting channel.\u003c\/li\u003e\n\u003cli\u003eVerify cabinet grounding is properly bonded using minimum #8 AWG solid copper wire connected from the IOTA ground lug to the main AC safety ground bar.\u003c\/li\u003e\n\u003cli\u003eAlign the \u003cstrong\u003e8C-IP0102\u003c\/strong\u003e circuit board edge connectors with the mating connector socket on the \u003cstrong\u003e8C-TPOXA1\u003c\/strong\u003e IOTA base.\u003c\/li\u003e\n\u003cli\u003ePush the module firmly onto the IOTA connector until fully seated.\u003c\/li\u003e\n\u003cli\u003eHand-tighten the retention screws on each side of the module cover to secure the physical assembly to the IOTA base.\u003c\/li\u003e\n\u003cli\u003eTighten the front plastic screw on the module faceplate using a #2 Phillips screwdriver without over-torquing.\u003c\/li\u003e\n\u003cli\u003eConnect yellow FTE-A Cat5 cable to FTEA connector and green FTE-B Cat5 cable to FTEB connector on the IOTA board.\u003c\/li\u003e\n\u003cli\u003eWire the shielded DB9\/terminal PROFIBUS network cables to the corresponding PBLink connectors on the IOTA base.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eConfiguration \/ Commissioning \/ Replacement\u003c\/h3\u003e\n\u003ch4\u003eConfiguration \u0026amp; Commissioning\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSet the rotary FTE Device Index switches (1 to 999) on the \u003cstrong\u003e8C-TPOXA1\u003c\/strong\u003e IOTA base to match the assigned node address in Honeywell Control Builder.\u003c\/li\u003e\n\u003cli\u003eApply 24 VDC system power; observe that the module boots into an ALIVE or NODB (No Database) operational state.\u003c\/li\u003e\n\u003cli\u003eDownload the appropriate firmware version matching the running system software baseline via Control Builder.\u003c\/li\u003e\n\u003cli\u003ePerform a \"Load with Contents\" operation from Control Builder to transfer network configurations, slave device maps, and control strategies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eReplacement Recommendations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-Process Requirement:\u003c\/strong\u003e Ensure the associated control loop or process segment is brought to a safe offline state prior to module maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule Removal:\u003c\/strong\u003e Loosen the two side cover screws and front faceplate plastic screw. Gently pull the module straight out from the \u003cstrong\u003e8C-TPOXA1\u003c\/strong\u003e IOTA base socket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule Installation:\u003c\/strong\u003e Insert the replacement \u003cstrong\u003e8C-IP0102\u003c\/strong\u003e module onto the existing IOTA base, securing all side screws and front plastic screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestoration:\u003c\/strong\u003e Once power is verified and the module reaches the ALIVE or NODB state, reload matching firmware and execute a \"Load with Contents\" from Control Builder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectromagnetic Compatibility (EMC):\u003c\/strong\u003e EN 61326-1:2006, IEC 61326-1:2005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Voltage Directive (LVD) \/ Safety:\u003c\/strong\u003e EN 61010-1:2010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectives:\u003c\/strong\u003e 2004\/108\/EC (EMC Directive), 2006\/95\/EC (Low Voltage Directive)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52667990606187,"sku":"8C-IP0102 51454362-275","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/honeywell-8c-ip0102-51454362-275-profibus-gateway-module-dptoxvneva1_1d3744bb-b018-4001-a640-40c222d36f46.jpg?v=1765504892"},{"product_id":"honeywell-fc-sswm01-51306930-176-sc-switch-module","title":"Honeywell FC-SSWM01 51306930-176 SC Switch Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Honeywell FC-SSWM01 51306930-176 is an SC Switch Module designed for deployment within the Honeywell Fail-Safe Control (FSC) safety system architecture. This module provides critical switching and communication routing functions to support high-integrity safety instrumented systems. It integrates directly into the FSC platform, establishing reliable data routing and control signal management required in demanding continuous process environments.\u003c\/p\u003e\n\u003cp\u003eEngineered for standard industrial control panel integration, the module mounts efficiently onto DIN rails while maintaining secure backplane connectivity. It supports deterministic network operations within safety-critical loops, ensuring that communication integrity and availability are preserved across distributed node connections. The unit is built to withstand industrial electrical interference and operates dependably within enclosed system racks.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for integration within the Honeywell FSC safety system architecture\u003c\/li\u003e\n  \u003cli\u003eProvides reliable switch and communication routing for safety instrumented functions\u003c\/li\u003e\n  \u003cli\u003eCompact form factor optimized for standard DIN-rail control panel mounting\u003c\/li\u003e\n  \u003cli\u003eEngineered for high availability and continuous operation in critical industrial processes\u003c\/li\u003e\n  \u003cli\u003eRobust noise immunity and internal diagnostics to support system-level fault tolerance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEmergency Shutdown Systems (ESD)\u003c\/li\u003e\n  \u003cli\u003eBurner Management Systems (BMS)\u003c\/li\u003e\n  \u003cli\u003eOil and gas upstream and downstream processing facilities\u003c\/li\u003e\n  \u003cli\u003eChemical and petrochemical plant safety instrumented loops\u003c\/li\u003e\n  \u003cli\u003ePower generation turbine safety and control interlocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eHoneywell\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExact Model\u003c\/td\u003e\n      \u003ctd\u003eFC-SSWM01\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrdering Number \/ Part ID\u003c\/td\u003e\n      \u003ctd\u003e51306930-176\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eSC Switch Module\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Family\u003c\/td\u003e\n      \u003ctd\u003eFSC System\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Type\u003c\/td\u003e\n      \u003ctd\u003eDIN Rail \/ Panel Mount\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n      \u003ctd\u003e0 Celsius to 60 Celsius\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStorage Temperature\u003c\/td\u003e\n      \u003ctd\u003e-40 Celsius to 85 Celsius\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUSA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight\u003c\/td\u003e\n      \u003ctd\u003e0.26 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e120 mm x 73 mm x 75 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eVerify the part number (FC-SSWM01 51306930-176) and inspect the module for any transit damage prior to installation.\u003c\/li\u003e\n  \u003cli\u003eEnsure all power to the target FSC system rack and backplane slot is completely de-energized before handling hardware.\u003c\/li\u003e\n  \u003cli\u003eMount the module securely onto the designated DIN rail or system chassis slot following standard Honeywell FSC mechanical guidelines.\u003c\/li\u003e\n  \u003cli\u003eVerify backplane pin alignment and push the module firmly into place to establish secure electrical connections.\u003c\/li\u003e\n  \u003cli\u003eRestore power and verify module diagnostic indicators via the engineering workstation to confirm proper system communication.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52667998241131,"sku":"FC-SSWM01 51306930-176","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/honeywell-fc-sswm01-51306930-176-sc-switch-module-jki34vwhoua_7ea798f4-ef95-44ae-b1be-6fdc556caab9.jpg?v=1765504971"},{"product_id":"honeywell-8c-tpoxa1-51307153-175-experion-series-8-profibus-gateway-iota-coated","title":"Honeywell 8C-TPOXA1 51307153-175 Experion Series 8 PROFIBUS Gateway IOTA, Coated","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHoneywell 8C-TPOXA1\u003c\/strong\u003e (Part Number \u003cstrong\u003e51307153-175\u003c\/strong\u003e) is a conformal coated Input\/Output Termination Assembly (IOTA) designed specifically for the Honeywell \u003cstrong\u003eExperion LX Series 8\u003c\/strong\u003e Distributed Control System (DCS) platform. It serves as the physical mounting and wiring interface for the \u003cstrong\u003eHoneywell 8C-IP0102 PROFIBUS Gateway Module (PGM)\u003c\/strong\u003e, enabling fieldbus communication links between field instrumentation and the controller system.\u003c\/p\u003e\n\u003cp\u003eThis IOTA functions as the vital connection point for external field communication cables, power distribution, and system-level interface routing. Built with factory conformal coating, the \u003cstrong\u003e8C-TPOXA1\u003c\/strong\u003e is engineered to withstand harsh industrial processing environments, preventing board-level contamination and corrosion.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Gateway Interface:\u003c\/strong\u003e Designed specifically to host the 8C-IP0102 PROFIBUS Gateway Module within the Experion Series 8 architecture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConformal Coating Protection:\u003c\/strong\u003e Coated circuit board construction provides enhanced resilience against industrial airborne pollutants and moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Connectivity:\u003c\/strong\u003e Features dual FTE-A and FTE-B Ethernet link RJ-45 ports along with PBLink network interface terminals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAddressing Capability:\u003c\/strong\u003e Incorporates three rotary FTE Device Index switches directly on the assembly for hardware node identification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Bus Isolation:\u003c\/strong\u003e Features grounded mounting interface hardware connecting to the system COM bus bar for proper ground integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcess Control Fieldbus Integration:\u003c\/strong\u003e Hosts PROFIBUS gateway modules connecting smart instrumentation to Experion Series 8 DCS controllers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosive Processing Environments:\u003c\/strong\u003e Ideal for installation in chemical, oil and gas, or manufacturing facilities requiring conformal coated control hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Network Subsystems:\u003c\/strong\u003e Interfacing field devices with high-availability control network topologies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e8C-TPOXA1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e51307153-175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003ePROFIBUS Gateway IOTA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eExperion LX Series 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating\u003c\/td\u003e\n\u003ctd\u003eConformal Coated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Current Rating\u003c\/td\u003e\n\u003ctd\u003e20 A (Header board subsystem)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 degC to +60 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40 degC to +85 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Humidity\u003c\/td\u003e\n\u003ctd\u003e5% to 95% RH (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibration\u003c\/td\u003e\n\u003ctd\u003e10–57 Hz (0.075 mm displacement), 57–150 Hz (1 G load)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical Shock\u003c\/td\u003e\n\u003ctd\u003e15 G in 3 axes (11 ms duration)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eConnections \/ Interfaces\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface \/ Connector\u003c\/th\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFTE-A (RJ-45)\u003c\/td\u003e\n\u003ctd\u003ePrimary Fault Tolerant Ethernet network link connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFTE-B (RJ-45)\u003c\/td\u003e\n\u003ctd\u003eSecondary Fault Tolerant Ethernet network link connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePBLink Ports\u003c\/td\u003e\n\u003ctd\u003ePROFIBUS network cable terminal connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice Index Switches\u003c\/td\u003e\n\u003ctd\u003eThree rotary switches for setting FTE hardware network node address\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem COM Ground\u003c\/td\u003e\n\u003ctd\u003eGround connection interface to cabinet COM bus bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eVerify that the system power supply is isolated or the system is off-process before mounting.\u003c\/li\u003e\n\u003cli\u003eConfirm the IOTA hardware part number and ensure the conformal coating matches installation requirements.\u003c\/li\u003e\n\u003cli\u003eMount the IOTA onto the cabinet channel rail using the dedicated screws, washers, and spacers.\u003c\/li\u003e\n\u003cli\u003eTighten the grounding screw on the right side of the IOTA to secure connection to the cabinet COM bus bar.\u003c\/li\u003e\n\u003cli\u003eEnsure the four main mounting screws are tightened uniformly without causing board distortion.\u003c\/li\u003e\n\u003cli\u003eConnect the yellow Cat5 cable to the FTE-A connector and green Cat5 cable to the FTE-B connector.\u003c\/li\u003e\n\u003cli\u003eTerminate PBLink fieldbus cables to their designated connector points.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eConfiguration and Replacement Recommendations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAddress Verification:\u003c\/strong\u003e Set the three rotary FTE Device Index switches to match the exact node address of the original unit prior to powering up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule Seating:\u003c\/strong\u003e When installing the 8C-IP0102 gateway module onto the IOTA, ensure board edge connectors mate cleanly before tightening retention screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Load:\u003c\/strong\u003e After hardware replacement, perform a \"Load with Contents\" operation from Control Builder to update operational parameters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Voltage Directive (LVD):\u003c\/strong\u003e EN 61010-1:2010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMC Directive:\u003c\/strong\u003e EN 61326-1:2006, IEC 61326-1:2005\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52668000207211,"sku":"8C-TPOXA1 51307153-175","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/honeywell-8c-tpoxa1-51307153-175-profibus-gateway-module-kevuqr2u2as_08b6b731-76d7-4c30-90e9-28bb1fb2fa1c.jpg?v=1765504993"},{"product_id":"honeywell-10004-1-1-fail-safe-control-communication-module","title":"Honeywell 10004\/1\/1 Fail Safe Control Communication Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHoneywell 10004\/1\/1\u003c\/strong\u003e is an isolated RS485\/RS422 communication interface module designed for serial data exchange within the Honeywell Fail Safe Control (FSC) safety system architecture. Operating within the Central Part (CP) rack assembly, the module establishes secure, galvanically isolated serial communication channels between the FSC safety logic solver and external automation platforms, such as supervisory Control and Data Acquisition (SCADA) systems, Distributed Control Systems (DCS), or peer programmable logic controllers.\u003c\/p\u003e\n\u003cp\u003eEngineered for safety-critical industrial applications, the \u003cstrong\u003eHoneywell 10004\/1\/1\u003c\/strong\u003e isolates external network noise, ground loops, and electrical transients from the core system buses. By maintaining physical and electrical separation, it prevents external electrical faults from compromising the central processing units or diagnostic subsystems. The module provides the underlying serial hardware layer required for high-availability system topologies, support for long-distance serial runs, and multidrop network configurations in harsh operating environments.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanic Isolation:\u003c\/strong\u003e Provides electrical isolation for serial signals to protect the Central Part backplane from field noise, ground loops, and voltage surges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual RS485 \/ RS422 Capability:\u003c\/strong\u003e Configurable interface architecture supporting multidrop RS485 differential bus topologies and point-to-point RS422 configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Bus Integration:\u003c\/strong\u003e Direct interface compatibility with FSC Central Part system racks and backplane communication structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Safety Architecture:\u003c\/strong\u003e Standardized Central Part module design built to conform with safety-instrumented system (SIS) standards and industrial safety control requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Noise Immunity:\u003c\/strong\u003e Differential signaling layout optimized for long-distance communication links in high electromagnetic interference (EMI) environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDCS \/ SCADA Subsystem Integration:\u003c\/strong\u003e Interfacing FSC safety instrumented systems with high-level plant control and monitoring systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeer-to-Peer Controller Networking:\u003c\/strong\u003e Connecting multiple FSC Central Part racks or auxiliary control networks via isolated serial links.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSequence of Events (SOE) Data Transmission:\u003c\/strong\u003e Transmitting diagnostic, alarm, and timestamped event data to external historian servers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Terminal Unit (RTU) \/ Field Device Communication:\u003c\/strong\u003e Serial data collection from remote field telemetry or specialized process equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e10004\/1\/1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eCommunication Module (COM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface Type\u003c\/td\u003e\n\u003ctd\u003eIsolated RS485 \/ RS422 Interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Architecture\u003c\/td\u003e\n\u003ctd\u003eHoneywell Fail Safe Control (FSC) Central Part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eIsolated interface circuitry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 degC to 60 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-25 degC to 80 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Humidity\u003c\/td\u003e\n\u003ctd\u003e95% relative humidity (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Resistance\u003c\/td\u003e\n\u003ctd\u003e15 G in 3 axes (11 ms duration)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibration Resistance\u003c\/td\u003e\n\u003ctd\u003e10–57 Hz (0.075 mm displacement), 57–150 Hz (1 G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Installation Safety Verification:\u003c\/strong\u003e Ensure power to the FSC Central Part rack is switched off and lock-out\/tag-out (LOTO) procedures are followed prior to inserting or removing the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack Slot Verification:\u003c\/strong\u003e Confirm the correct Central Part rack slot allocation in accordance with the FSC system configuration software before hardware insertion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD Precautions:\u003c\/strong\u003e Wear a grounded electrostatic discharge (ESD) wrist strap while handling the module to prevent damage to internal sensitive components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical Mounting:\u003c\/strong\u003e Align the module card edges with the Central Part rack guides, sliding the module firmly into place until the rear backplane connectors fully seat. Secure the front retaining fasteners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring and Shielding:\u003c\/strong\u003e Route shielded twisted-pair (STP) cable to the module's serial interface connector. Ensure signal shields are properly grounded at a single protective earth point to avoid ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface Termination:\u003c\/strong\u003e Verify that appropriate RS485\/RS422 line termination resistors are installed at the physical end nodes of the serial communication bus to minimize reflections.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52668006564203,"sku":"10004\/1\/1","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/10004-1-1_005_1200x1200_0115b80f-6d9a-4fc9-a6c5-49efa9a20a80.jpg?v=1787293629"},{"product_id":"honeywell-fs-cci-uni-02-universal-communication-cable","title":"Honeywell FS-CCI-UNI-02 Universal Communication Cable","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Honeywell FS-CCI-UNI-02 is a specialized communication cable engineered for use within Honeywell Safety Manager and Experion PKS distributed control environments. This hardware component serves as a dedicated physical link for data transmission between safety processors, controller nodes, and associated configuration or diagnostic equipment. It facilitates secure parameterization, firmware updates, and runtime communication within high-integrity industrial safety instrumented systems (SIS).\u003c\/p\u003e\n\u003cp\u003eBuilt with ruggedized shielding and industrial-grade connectors, the FS-CCI-UNI-02 cable ensures signal integrity and noise immunity against electromagnetic interference (EMI) and radio frequency interference (RFI) typically encountered in process plant installations. The assembly maintains deterministic communication pathways necessary for maintaining system reliability and diagnostic coverage across safety-critical infrastructure.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered specifically for Honeywell Safety Manager and Experion PKS system architectures\u003c\/li\u003e\n  \u003cli\u003eIndustrial-grade shielding to minimize electromagnetic interference (EMI) in harsh plant environments\u003c\/li\u003e\n  \u003cli\u003eRobust molded connectors designed for secure physical locking and repeated insertion cycles\u003c\/li\u003e\n  \u003cli\u003eMaintains signal fidelity for real-time controller programming, diagnostics, and data exchange\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSafety Manager controller configuration and troubleshooting\u003c\/li\u003e\n  \u003cli\u003eExperion PKS system maintenance and diagnostic data retrieval\u003c\/li\u003e\n  \u003cli\u003eInter-module communication linking within safety instrumented system (SIS) cabinets\u003c\/li\u003e\n  \u003cli\u003eField engineering workstation connectivity to safety processor nodes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eHoneywell\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Series\u003c\/td\u003e\n      \u003ctd\u003eSafety Manager \/ Experion PKS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePart Number \/ Model\u003c\/td\u003e\n      \u003ctd\u003eFS-CCI-UNI-02\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eCommunication Cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUnited States\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52668010824043,"sku":"FS-CCI-UNI-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/honeywell-fs-cci-uni-02-communication-cable-40rnpyn2ae2_d1ff2c43-eee2-4b37-a0ac-07db47fc6279.jpg?v=1765505102"},{"product_id":"honeywell-fsc-10024-h-i-26901-enhanced-communication-module","title":"Honeywell FSC 10024\/H\/I 26901 Enhanced Communication Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHoneywell 10024\/H\/I\u003c\/strong\u003e (Model Type \u003cstrong\u003e26901\u003c\/strong\u003e) is an enhanced communication and interface module engineered specifically for the Honeywell Fail-Safe Control (FSC) safety system series. Designed to provide critical connectivity between systems, this rack-mounting card enables seamless inter-system data transfer and external network interface capabilities required in high-integrity industrial environments.\u003c\/p\u003e\n\u003cp\u003eOperating on a \u003cstrong\u003e5V DC\u003c\/strong\u003e internal power rail with a typical current draw of \u003cstrong\u003e675mA\u003c\/strong\u003e, the module houses an integrated central processor along with dual front-panel serial ports. The port configuration consists of port A supporting \u003cstrong\u003eRS-232\u003c\/strong\u003e communication and port B configured for differential \u003cstrong\u003eRS-422\/RS-485\u003c\/strong\u003e industrial links. This dual-interface architecture allows the FSC safety controller to interface concurrently with distributed control systems (DCS), supervisory control and data acquisition (SCADA) platforms, or dedicated operator stations without sacrificing system execution speed.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Serial Architecture:\u003c\/strong\u003e Equipped with two front-panel DB9 connectors (Ports A and B) to manage isolated serial communication channels simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Protocol Support:\u003c\/strong\u003e Supports RS-232 link protocols on Port A alongside RS-422 and RS-485 differential links on Port B for versatile field connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Processing:\u003c\/strong\u003e Features built-in central processor (CP) logic to handle communication overhead, offloading message parsing from the central FSC processing modules.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Rack Integration:\u003c\/strong\u003e Form-factor designed for direct insertion into standard FSC Central Part system bus racks (such as 7-slot, 12-slot, or 17-slot chassis configurations).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Power Consumption:\u003c\/strong\u003e Runs off the internal system backplane supply at 5V DC drawing approximately 675mA under normal operational load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDCS and Safety System Interfacing:\u003c\/strong\u003e Establishing serial Modbus or proprietary communication links between Honeywell FSC safety systems and Honeywell Experion PKS or third-party DCS networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Device Monitoring:\u003c\/strong\u003e Connecting auxiliary industrial equipment such as local HMIs, sequence of events (SOE) recorders, and diagnostic computers to the FSC safety logic solver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem-to-System Peer Data Transfer:\u003c\/strong\u003e Supporting serial links between multi-rack FSC node configurations or distributed safety system architectures across process sites.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 32.1503%;\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth style=\"width: 67.4322%;\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.1503%;\"\u003eManufacturer\u003c\/td\u003e\n\u003ctd style=\"width: 67.4322%;\"\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.1503%;\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"width: 67.4322%;\"\u003e10024\/H\/I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.1503%;\"\u003eModel Type\u003c\/td\u003e\n\u003ctd style=\"width: 67.4322%;\"\u003e26901\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.1503%;\"\u003eSystem Series\u003c\/td\u003e\n\u003ctd style=\"width: 67.4322%;\"\u003eFail-Safe Control (FSC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.1503%;\"\u003eModule Type\u003c\/td\u003e\n\u003ctd style=\"width: 67.4322%;\"\u003eEnhanced Communication \/ Interface Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.1503%;\"\u003eInput Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 67.4322%;\"\u003e5V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.1503%;\"\u003eCurrent Consumption\u003c\/td\u003e\n\u003ctd style=\"width: 67.4322%;\"\u003e675mA (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.1503%;\"\u003eFront Ports\u003c\/td\u003e\n\u003ctd style=\"width: 67.4322%;\"\u003e2 x DB9 Serial Connectors (Labeled A and B)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.1503%;\"\u003eSerial Interfaces\u003c\/td\u003e\n\u003ctd style=\"width: 67.4322%;\"\u003eRS-232 (Port A) \/ RS-422 \/ RS-485 (Port B)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.1503%;\"\u003eProcessor Hardware\u003c\/td\u003e\n\u003ctd style=\"width: 67.4322%;\"\u003eIntegrated Central Processor (int. CP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.1503%;\"\u003eMounting Format\u003c\/td\u003e\n\u003ctd style=\"width: 67.4322%;\"\u003eFSC Central Part System Bus Rack Card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eConnections \/ Interfaces\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eFunction \/ Protocol Support\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort A\u003c\/td\u003e\n\u003ctd\u003eDB9 Male\/Female Front Panel\u003c\/td\u003e\n\u003ctd\u003eSerial Communication Interface (RS-232)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort B\u003c\/td\u003e\n\u003ctd\u003eDB9 Male\/Female Front Panel\u003c\/td\u003e\n\u003ctd\u003eSerial Communication Interface (RS-422 \/ RS-485)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBackplane Bus\u003c\/td\u003e\n\u003ctd\u003eEdge Connector\u003c\/td\u003e\n\u003ctd\u003e5V DC Power Input and Internal FSC Bus Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Inspection:\u003c\/strong\u003e Verify system power and confirm that the backplane supply delivers stable 5V DC before inserting the card into the FSC rack chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCard Slot Alignment:\u003c\/strong\u003e Ensure the target rack slot on the FSC S7-BUS, S12-BUS, or S17-BUS is free of debris. Carefully align the card edges with the guide rails and press firmly to seat the backplane edge connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Cable Termination:\u003c\/strong\u003e For RS-422 or RS-485 connections on Port B, ensure proper line termination resistors are implemented across long cable runs to prevent signal reflection and data corruption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding and Grounding:\u003c\/strong\u003e Connect shielded twisted-pair cables to DB9 ports, ensuring proper signal grounding techniques are applied to prevent electromagnetic interference (EMI) from affecting safety communications.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eConfiguration and Replacement Recommendations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eParameter Verification:\u003c\/strong\u003e Prior to replacing an existing module, record all serial communication parameters (baud rate, parity, data bits, stop bits, node ID) configured in the FSC engineering software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHot Swapping Precaution:\u003c\/strong\u003e Power down the slot or respect FSC rack maintenance procedures before inserting or extracting the module to protect sensitivity-critical internal logic components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommissioning Check:\u003c\/strong\u003e After installation, verify status LEDs on the front panel and initiate communication diagnostic tests from the master control station to confirm active Tx\/Rx data transfer on both Port A and Port B.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52668020556139,"sku":"10024\/H\/I","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/honeywell-10024-h-i-communication-module-oba4pyrbr3j_e2f932ce-247f-4fcb-9b85-aaaec664d435.jpg?v=1765505201"},{"product_id":"honeywell-51305482-220-experion-pks-100-base-t-network-cable","title":"Honeywell 51305482-220 Experion PKS 100-Base-T Network Cable","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Honeywell 51305482-220 is a 20-meter 100-Base-T industrial Ethernet cable designed for high-integrity network interconnections within Experion PKS distributed control systems (DCS). This physical layer link component facilitates stable Ethernet communication between control processors, networking hardware, and operator nodes, ensuring low-latency data exchange across process automation architectures.\u003c\/p\u003e\n\u003cp\u003eConstructed for industrial networking requirements, the cable maintains electrical signal integrity across extended cable runs within control rooms and cabinet enclosures. It integrates with Honeywell Ethernet infrastructure to support deterministic communication protocols essential for continuous process control and plant-wide automation management.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e20-meter standardized length engineered for internal cabinet routing and inter-panel network expansion\u003c\/li\u003e\n  \u003cli\u003eSupports 100 Mbps data transmission rates and 100 MHz bandwidth for high-speed Ethernet infrastructure\u003c\/li\u003e\n  \u003cli\u003eControlled characteristic impedance of 100 Ohms to minimize signal reflection and transmission loss\u003c\/li\u003e\n  \u003cli\u003eFactory-terminated connectors designed for secure mechanical retention in high-vibration industrial spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eInterconnecting Experion PKS C300 controllers, Series C hardware, and Ethernet switches\u003c\/li\u003e\n  \u003cli\u003eEstablishing plant control network links between supervisory servers and distributed node drops\u003c\/li\u003e\n  \u003cli\u003eProviding physical network infrastructure for industrial automation control panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBrand\u003c\/td\u003e\n      \u003ctd\u003eHoneywell\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Series\u003c\/td\u003e\n      \u003ctd\u003eExperion PKS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModel \/ Part Number\u003c\/td\u003e\n      \u003ctd\u003e51305482-220\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003e100-Base-T Ethernet Cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCable Length\u003c\/td\u003e\n      \u003ctd\u003e20 meters\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eData Rate\u003c\/td\u003e\n      \u003ctd\u003e100 Mbps\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBandwidth\u003c\/td\u003e\n      \u003ctd\u003e100 MHz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCharacteristic Impedance\u003c\/td\u003e\n      \u003ctd\u003e100 Ohms\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n      \u003ctd\u003e-20 degC to +60 degC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUnited States\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52668024881515,"sku":"51305482-220","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/honeywell-51305482-220-100-base-t-cable-duba4a2swcf_590bf501-5cbc-4da5-ba0e-085fa5b645d9.jpg?v=1765505260"},{"product_id":"honeywell-tc-ccr013-controlnet-redundant-communications-module","title":"Honeywell TC-CCR013 ControlNet Redundant Communications Module","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTC-CCR013\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eserves as a high-performance ControlNet interface within the ControlLogix architecture, engineered specifically for mission-critical applications requiring physical media redundancy. Unlike standard single-channel modules, this dual-media interface ensures continuous data flow across redundant trunk cables (Trunk A and Trunk B). It facilitates high-speed, deterministic communication between controllers, I\/O chassis, and human-machine interfaces (HMI) in complex industrial networks.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eDetailed Engineering Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCommunication Protocol:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eControlNet (RG-6 Coaxial 기반)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eData Transfer Rate:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFixed at 5 Mbit\/sec\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRedundancy Configuration:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDual Media (Trunk A \u0026amp; Trunk B support)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity Architecture:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBus topology utilizing BNC connectors and Taps\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Node Distance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCombined Coax\/Fiber length up to 10 km\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSegment Length (Coax):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"math-inline\"\u003e$1000\\text{ m} - (16.3\\text{ m} \\times [\\text{Taps} - 2])$\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRepeater Capacity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSupports up to 5 Repeaters per communication path\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLink Differential:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e800 m maximum allowed length difference between redundant trunk cables\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCable Compatibility:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRG-6 Quad Shield (Standard PVC, Armored, Plenum FEP, or Flood Burial variants)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eNetwork Topology Constraints\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eLimit \/ Requirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eMax Segments\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e6 segments per network\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTopology Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eTrunk line\/Drop line\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eMedia Interface\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eDual BNC ports for seamless switchover\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eIsolation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eHigh-level electromagnetic interference (EMI) resistance via Quad Shielding\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cstrong\u003eCommon Applications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Availability Systems:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUsed in chemical processing, power generation, and wastewater treatment where network failure is not an option.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHarsh Environments:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDeployment in extreme temperature zones or corrosive areas using Plenum-rated FEP cabling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eExtended Reach Networks:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUtilizing repeaters and fiber optic bridges to span distances up to 10,000 meters.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical FAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if Trunk A is disconnected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTC-CCR013\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eautomatically switches to Trunk B without interrupting the process data. The module continuously monitors the health of both paths to ensure deterministic performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this module be used with fiber optics?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, while the module natively uses BNC coax, it can interface with fiber optic segments through the use of ControlNet fiber repeaters to extend the total network distance to 10 km.\u003c\/p\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52668031697259,"sku":"TC-CCR013","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/honeywell-tc-ccr013-redundant-net-interface-module-5jsbhffojet_31906496-0c73-410a-8356-4f9330ce414a.jpg?v=1765505328"},{"product_id":"honeywell-51305482-102-experion-pks-100-base-t-network-cable","title":"Honeywell 51305482-102 Experion PKS 100-BASE-T Network Cable","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Honeywell 51305482-102 is a 2-meter 100-BASE-T network cable engineered for reliable communication within Honeywell Experion PKS distributed control systems and other compatible industrial network infrastructures. Designed to maintain stable network performance, this cable connects system nodes, controllers, and communication modules where dependable Ethernet connectivity is required.\u003c\/p\u003e\n\u003cp\u003eThis network cable features color-coded boots, available in yellow and green, to facilitate clear port identification and error-free installation during system setup or maintenance. Built to stringent industrial standards, the cable utilizes 24 AWG conductors and supports high-integrity data transmission across demanding control room environments.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-meter length suitable for standard cabinet and control room routing\u003c\/li\u003e\n  \u003cli\u003e100-BASE-T Ethernet compatibility supporting 100Mbps data rates and 100MHz bandwidth\u003c\/li\u003e\n  \u003cli\u003eColor-coded boots in yellow and green for fast visual identification during installation\u003c\/li\u003e\n  \u003cli\u003eCharacteristic impedance of 100 ohms with tight tolerance for minimized signal reflection\u003c\/li\u003e\n  \u003cli\u003eConstructed with 24 AWG conductors for balanced electrical performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHoneywell Experion PKS DCS network connectivity\u003c\/li\u003e\n  \u003cli\u003eIndustrial Ethernet switch and controller interconnections\u003c\/li\u003e\n  \u003cli\u003eControl room and marshalling cabinet data routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eHoneywell\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExact Model\u003c\/td\u003e\n      \u003ctd\u003e51305482-102\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003e100-BASE-T Network Cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSeries\u003c\/td\u003e\n      \u003ctd\u003eExperion PKS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCable Length\u003c\/td\u003e\n      \u003ctd\u003e2 meters (6.5 ft)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eData Rate\u003c\/td\u003e\n      \u003ctd\u003e100 Mbps\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBandwidth\u003c\/td\u003e\n      \u003ctd\u003e100 MHz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConductor Gauge\u003c\/td\u003e\n      \u003ctd\u003e24 AWG\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCharacteristic Impedance\u003c\/td\u003e\n      \u003ctd\u003e100 ohms +\/- 15 percent\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDC Resistance\u003c\/td\u003e\n      \u003ctd\u003eLess than or equal to 9.38 ohms per 100m\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCapacitance\u003c\/td\u003e\n      \u003ctd\u003eLess than or equal to 5.6 nF per 100m\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n      \u003ctd\u003e0 degC to +60 degC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStorage Temperature Range\u003c\/td\u003e\n      \u003ctd\u003e-20 degC to +75 degC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRelative Humidity\u003c\/td\u003e\n      \u003ctd\u003e5 percent to 95 percent non-condensing\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUnited States\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConnections \/ Interfaces\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eInterface\u003c\/th\u003e\n      \u003cth\u003eFunction\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRJ-45 Connector (End 1)\u003c\/td\u003e\n      \u003ctd\u003eEthernet network port connection\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRJ-45 Connector (End 2)\u003c\/td\u003e\n      \u003ctd\u003eEthernet network port connection\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eVerify the part number 51305482-102 matches system architecture requirements before installation.\u003c\/li\u003e\n  \u003cli\u003eEnsure connected network equipment is powered down or follow standard hot-swap procedures if applicable.\u003c\/li\u003e\n  \u003cli\u003eInspect the cable connectors and boots for any debris or physical damage.\u003c\/li\u003e\n  \u003cli\u003eRoute the cable away from high-voltage power lines and sources of electromagnetic interference to preserve signal integrity.\u003c\/li\u003e\n  \u003cli\u003eInsert the RJ-45 plugs into the designated ports until the locking tabs click securely into place, utilizing the color-coded boots for port mapping.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52668031992171,"sku":"51305482-102","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/honeywell-51305482-102-control-systems-3bxch4mwxgm_da8da45d-926b-408e-b551-1961b8ad2d13.jpg?v=1765505331"},{"product_id":"bently-nevada-3500-92-03-01-cn-3500-92-communication-gateway-module","title":"Bently Nevada 3500\/92-03-01-CN 3500\/92 Communication Gateway Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e3500\/92-03-01-CN\u003c\/strong\u003e is an industrial communication module that provides high-speed integration of rack-monitored variables and statuses with process control systems, distributed control systems (DCS), and plant automation networks. The module supports both Ethernet TCP\/IP and serial multi-drop infrastructures (including RS232, RS422, and RS485 physical layers) to manage the transmission of critical machinery data. Beyond plant host interfaces, it enables seamless Ethernet communications with the 3500 Rack Configuration Software and 3500 Data Acquisition Software packages.\u003c\/p\u003e\n\u003cp\u003eBy incorporating an internal network backplane, the \u003cstrong\u003e3500\/92-03-01-CN\u003c\/strong\u003e collects time-stamped measured values, current hardware module statuses, and current alarm event logs directly from adjacent machinery protection cards. The unit features a Configurable Modbus Register Utility to customize information maps transferred via Modicon Modbus (serial) and Modbus\/TCP (Ethernet) protocols. This specific model variant consists of a full-height front processor combined with an Ethernet\/RS232 Modbus I\/O module designed for robust serial-to-network translations.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComprehensive communication capabilities across all 3500 rack-monitored values, alarm statuses, and hardware operational diagnostics.\u003c\/li\u003e\n\u003cli\u003eConfigurable Modbus Register Utility allows custom-tailored database layouts matching process control architecture profiles.\u003c\/li\u003e\n\u003cli\u003eSupports Modicon Modbus (RTU mode via serial lines) and standard Modbus\/TCP frames over Ethernet networks.\u003c\/li\u003e\n\u003cli\u003eProvides isolated dual-protocol operation for concurrently serving automation hosts and Bently Nevada software utilities.\u003c\/li\u003e\n\u003cli\u003eFront panel diagnostic array featuring a dedicated OK LED for system health and a TX\/RX LED to confirm intra-rack communication traffic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDistributed Control System (DCS) and Programmable Logic Controller (PLC) machine data streaming.\u003c\/li\u003e\n\u003cli\u003eReal-time remote vibration monitoring and thermal metric aggregation over standard plant infrastructure.\u003c\/li\u003e\n\u003cli\u003eIntegration of turbomachinery protection systems with safety instrumented systems (SIS) and plant historians.\u003c\/li\u003e\n\u003cli\u003eRemote configuration, diagnosis, and acquisition management via centralized server configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e3500\/92-03-01-CN\u003c\/strong\u003e configuration corresponds to the following exact build options from the 3500\/92 series database:\u003c\/p\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eCode Option\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSelection Details\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3500\/92\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCommunication Gateway Module Product Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-03\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eI\/O Module Type: Ethernet\/RS232 Modbus I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-01\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMemory Type: Low Memory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e-CN\u003c\/strong\u003e \/ \u003cstrong\u003e-01\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003eAgency Approval Option: CSA\/NRTL\/C (Class I, Division 2, Groups A, B, C, D)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes Company)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.0 Watts typical with Modbus RS232\/RS422 I\/O Module \/ 5.6 Watts typical with Modbus RS485 I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eData Collection Rate (Update Time)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLess than or equal to 1 second for all modules in the 3500 rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEthernet Link Performance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 Mbps, conforms to IEEE 802.3 Ethernet TCP\/IP frame specifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEthernet Connection Interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRJ-45 for 10BASE-T Ethernet cabling topologies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSerial Modbus Transmission Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRemote Terminal Unit (RTU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30 Celsius to +65 Celsius (-22 Fahrenheit to +149 Fahrenheit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 Celsius to +85 Celsius (-40 Fahrenheit to +185 Fahrenheit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHumidity Limits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e95% relative humidity, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain Processor Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.82 kg (1.8 lb.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eI\/O Module Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.44 kg (0.96 lb.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain Processor Dimensions (H x W x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e241 mm x 24.4 mm x 242 mm (9.50 in x 0.96 in x 9.52 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eI\/O Module Dimensions (H x W x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e241 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRack Space Requirement (Front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 full-height front slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRack Space Requirement (Rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 full-height rear slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eConnections\/Interfaces\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003ePort \/ Component\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRJ-45 Ethernet Port\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTelephone-jack style terminal enabling 10BASE-T link connection for Modbus\/TCP host polling and software configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRS232 Serial DB9 Port\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard 9-pin interface supporting serial Modbus RTU communications directly to host process computers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOK LED\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eContinuous green indicator verifying proper internal microprocessing and execution of system runtime logic.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTX\/RX LED\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePulsing communication indicator reflecting dynamic data exchange via the internal high-speed network backplane.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule Placement:\u003c\/strong\u003e Install the main processing board in a designated full-height front slot of the 3500 system rack chassis. Align and secure the paired Ethernet\/RS232 Modbus I\/O module in the corresponding rear chassis slot directly opposite the front module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrostatic Control:\u003c\/strong\u003e Wear a clean grounding wrist strap (such as part number 04425545) before unboxing or touching the circuit assemblies to avoid exposing internal logic gates to static discharge damages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Segmenting:\u003c\/strong\u003e Use standard 10BASE-T Shielded Category 5 cables equipped with RJ-45 termination blocks for the network segment. Ensure length parameters do not exceed 98 meters (320 feet) without external repeating hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Cable Configuration:\u003c\/strong\u003e Maximum recommended physical run metrics for serial interfaces should not surpass 1220 meters (4000 feet) for multi-dropped arrangements when matching RS422 or RS485 communication lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Isolation:\u003c\/strong\u003e Ensure unobstructed cabinet airflow across the top and bottom panels of the rack chassis to verify ambient air properties stay well within the -30 Celsius to +65 Celsius operating baseline.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFCC:\u003c\/strong\u003e Complies with Part 15 of the FCC Rules for interference control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMC Directive:\u003c\/strong\u003e 2014\/30\/EU (Standards: EN 61000-6-2 for Industrial Immunity, EN 61000-6-4 for Industrial Emissions).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Safety:\u003c\/strong\u003e Low Voltage Directive 2014\/35\/EU (Standard: EN 61010-1).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoHS:\u003c\/strong\u003e Directive 2011\/65\/EU compliance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaritime Approvals:\u003c\/strong\u003e Certified under DNV GL classification rules for ships, offshore units, and light craft; certified under ABS Rules for Steel Vessels and Offshore Structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHazardous Area Standards:\u003c\/strong\u003e Class I, Zone 2: AEx\/Ex nA nC ic IIC T4 Gc and AEx\/Ex ec nC ic IIC T4 Gc; Class I, Division 2, Groups A, B, C, and D (T4 rating at ambient zones matching -20 Celsius to +65 Celsius).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eATEX\/IECEx:\u003c\/strong\u003e Ex II 3 G Ex nA nC ic IIC T4 Gc \/ Ex ec nC ic IIC T4 Gc.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668297544043,"sku":"3500\/92-03-01-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/350092-03-01-CN-vp2qhutukes_fb6a3b4a-fd5d-4a05-8fd1-5a77a8aed83a.jpg?v=1765520446"},{"product_id":"bently-nevada-3500-92-04-01-00-3500-92-communication-gateway-module","title":"Bently Nevada 3500\/92-04-01-00 3500\/92 Communication Gateway Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e3500\/92-04-01-00\u003c\/strong\u003e acts as a specialized data communications link designed to export extensive rack-monitored values, statuses, and events from a \u003cstrong\u003e3500 Series Machinery Protection System\u003c\/strong\u003e into process control and plant automation networks. It handles concurrent translations using Modbus\/TCP across Ethernet connections and standard serial Modbus protocols to bridge machine tracking databases with external process infrastructure. The device enables immediate parameter interrogation for operations personnel and includes a built-in Configurable Modbus Register Utility to customize high-density address mapping. Operating within a dedicated full-height slot of the standard rack, it provides simultaneous communication channels to interface field instrumentation networks with remote computers running specialized configuration and data acquisition tools.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComprehensive machinery telemetry transport providing real-time data access from all concurrent monitor slots.\u003c\/li\u003e\n\u003cli\u003eDual protocol versatility managing both Modicon Modbus serial line communications and Modbus\/TCP Ethernet services.\u003c\/li\u003e\n\u003cli\u003eIntegrated Configurable Modbus Register Utility for user-defined mapping optimizations to match host automation system drivers.\u003c\/li\u003e\n\u003cli\u003eSupport for custom data transmission protocol links to interface seamlessly with 3500 Rack Configuration and Data Acquisition Software.\u003c\/li\u003e\n\u003cli\u003eStandard RJ45 interface connection accommodating 10BASE-T star network Ethernet topologies.\u003c\/li\u003e\n\u003cli\u003eIndividual hardware status diagnostics utilizing front-panel OK and TX\/RX communication activity LEDs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemote machinery health data acquisition and protective system visibility.\u003c\/li\u003e\n\u003cli\u003eHigh-speed link interfaces into plant Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC).\u003c\/li\u003e\n\u003cli\u003eCentralized SCADA and plant-wide Historian archiving systems for rotating machinery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eOption Code\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3500\/92\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCommunication Gateway Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eA: 04\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEthernet\/RS485 Modbus I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eB: 01\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAgency Approval Option: CSA\/NRTL\/C (Class 1, Div 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eC: 00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDescription\/Country Specific Option: None\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eData\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eElectrical\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e5.0 watts typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eData Communications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEthernet Connection\u003c\/td\u003e\n\u003ctd\u003eRJ45 for 10BASE-T star network topology\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eSerial Communication Types\u003c\/td\u003e\n\u003ctd\u003eRS232, RS422, and RS485\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eSupported Protocols\u003c\/td\u003e\n\u003ctd\u003eModicon Modbus protocol, Modbus\/TCP protocol, and proprietary Bently Nevada protocol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnvironmental\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-30 degC to +65 degC (-22 degF to +150 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eStorage Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-40 degC to +85 degC (-40 degF to +185 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003e95% non-condensing maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMechanical\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGateway Main Module Dimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eGateway Main Module Weight\u003c\/td\u003e\n\u003ctd\u003e0.82 kg (1.8 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eI\/O Module Dimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e241.3 mm x 24.4 mm x 103.1 mm (9.50 in x 0.96 in x 4.06 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eI\/O Module Weight\u003c\/td\u003e\n\u003ctd\u003e0.44 kg (1.0 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eFront Rack Positioning Slot\u003c\/td\u003e\n\u003ctd\u003e1 full-height front slot (must locate right of the Rack Interface Module)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eRear Rack Positioning Slot\u003c\/td\u003e\n\u003ctd\u003e1 full-height rear slot directly behind main module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eConnections\/Interfaces\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003ePort \/ Indicator Terminal\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFront OK LED\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIlluminates when the main communication module is processing normally\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFront TX\/RX LED\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlashes to indicate active serial or network communications traffic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRJ45 Port (Modbus\/TCP)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard 10BASE-T star ethernet configuration link to host networks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRS485 Port (Modbus 2)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMulti-drop serial communication bus interface terminal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlot Placement:\u003c\/strong\u003e Insert the front gateway module into any available full-height slot location positioned directly to the right of the primary Rack Interface Module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Card Mounting:\u003c\/strong\u003e Secure the specific Ethernet\/RS485 Modbus I\/O card into the rear full-height frame position directly behind the newly placed main board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Shielding:\u003c\/strong\u003e Connect all multi-drop RS485 differential signals using high-quality twisted pair cables wrapped in proper ground shields to prevent electrical noise induction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegister Configuration:\u003c\/strong\u003e Define specific network parameters, baud rates, and register allocations beforehand within the 3500 Rack Configuration software utility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMC Directives:\u003c\/strong\u003e 2014\/30\/EU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMC Standards:\u003c\/strong\u003e EN 61000-6-2 (Immunity for Industrial Environments), EN 61000-6-4 (Emissions for Industrial Environments), EN 55011 Class A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Safety:\u003c\/strong\u003e 2014\/35\/EU Low Voltage Directive; EN 61010-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHazardous Area Approvals (Option 01):\u003c\/strong\u003e CSA\/NRTL\/C; Class I, Division 2, Groups A, B, C, and D; T4 @ Ta = -20 degC to +65 degC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668300263787,"sku":"3500\/92-04-01-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/350092-04-01-00-z04rbllxur2_9e01afeb-01e5-4bb2-8c5b-a83f43bce65d.jpg?v=1765520513"},{"product_id":"bently-nevada-3500-92-04-01-cn-3500-series-communication-gateway-module","title":"Bently Nevada 3500\/92-04-01-CN 3500 Series Communication Gateway Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eIntegrating seamlessly into the 3500 Machinery Protection System, the \u003cstrong\u003eBently Nevada 3500\/92-04-01-CN\u003c\/strong\u003e establishes a high-performance digital gateway for transmitting critical machinery diagnostics to external host systems. This communication module processes data from other monitor modules within the rack and transmits values, status, and alarms over serial or Ethernet links. This specific configuration features an Ethernet\/RS485 Modbus I\/O module with low memory and country-specific CN agency approvals, designed to meet strict field safety and technical standards.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; margin-bottom: 1.5rem; padding-left: 1.5rem;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlexible Communication Protocols:\u003c\/strong\u003e Supports Modbus RTU via RS485 and Modbus TCP\/IP via Ethernet.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReal-Time Data Access:\u003c\/strong\u003e Transmits channel values, statuses, alert levels, and system event lists to host controllers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact Integration:\u003c\/strong\u003e Occupies a single slot in the 3500 rack, reducing panel footprint.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRobust Diagnostic Mapping:\u003c\/strong\u003e Customizable registers allow efficient DCS or SCADA alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; margin-bottom: 1.5rem; padding-left: 1.5rem;\"\u003e\n  \u003cli\u003ePower Generation Turbomachinery integration with plant control networks.\u003c\/li\u003e\n  \u003cli\u003ePetrochemical and Refining process safety control architectures.\u003c\/li\u003e\n  \u003cli\u003eCompressor and Gas Turbine remote health monitoring.\u003c\/li\u003e\n  \u003cli\u003eDistributed SCADA and Plant Historian data concentration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; width: 100%; margin-bottom: 1.5rem;\"\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; color: #2d3748;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"border-bottom: 2px solid #2d3748;\"\u003e\n        \u003cth style=\"text-align: left; padding: 8px; font-weight: bold;\"\u003eParameter\u003c\/th\u003e\n        \u003cth style=\"text-align: left; padding: 8px; font-weight: bold;\"\u003eSpecification\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eManufacturer\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eBently Nevada\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eModel\/Part Number\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e3500\/92-04-01-CN\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eSystem Series\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e3500 Machinery Protection System\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eI\/O Module Option\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e04 (Ethernet \/ RS485 Modbus I\/O Module)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eMemory Option\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e01 (Low Memory)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eAgency Approval Option\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eCN (Country Specific Approvals - China)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003ePower Consumption\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e5.6 Watts typical (with RS485 I\/O Module installed)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eCountry of Origin\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eUnited States (USA)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eShipping Weight\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e3.0 kg\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; width: 100%; margin-bottom: 1.5rem;\"\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; color: #2d3748;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"border-bottom: 2px solid #2d3748;\"\u003e\n        \u003cth style=\"text-align: left; padding: 8px; font-weight: bold;\"\u003eInterface Type\u003c\/th\u003e\n        \u003cth style=\"text-align: left; padding: 8px; font-weight: bold;\"\u003ePort Description \/ Pin Assignment\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eEthernet Port\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eRJ-45 connector supporting Modbus\/TCP protocol\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eRS485 Port\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eStandard terminal block connections for differential 2-wire \/ 4-wire multidrop layouts\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eConfig Port\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eFront-panel connection for module configuration utilities\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eEmpirical Engineering Insights\u003c\/h3\u003e\n\u003ch4 style=\"color: #1a365d;\"\u003eAlternative Models \u0026amp; Compatibility\u003c\/h4\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eThis module replaces older communication gateways in legacy 3500 architectures. Ensure your 3500 Rack Configuration Software is updated to version 4.0 or higher to correctly map the 04 (Ethernet\/RS485) hardware footprint. Be aware that the low-memory (01) model variant cannot store high-density event records compared to high-memory equivalents; verify your controller's polling demands before hot-swapping.\u003c\/p\u003e\n\n\u003ch4 style=\"color: #1a365d;\"\u003eApplication Pitfalls \u0026amp; Engineering Notes\u003c\/h4\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eWhen deploying the RS485 interface in noisy industrial spaces, minimize EMI interference by running communication lines isolated from high-voltage motor starters and variable frequency drive output cables. A common failure mode on the low-memory version is register buffer overflow caused by high host polling speeds; do not configure polling frequencies tighter than 500 milliseconds.\u003c\/p\u003e\n\n\u003ch4 style=\"color: #1a365d;\"\u003eCommissioning \u0026amp; Wiring Tips\u003c\/h4\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eFor RS485 serial runs, install a 120-ohm termination resistor at the absolute physical end-of-line node to prevent signal reflection. Always connect the cable shield to the instrumentation ground terminal on the 3500 rack frame only. Floating shields on long cable runs risk generating high ground loop current paths.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cdiv style=\"background-color: #fff5f5; border-left: 4px solid #c53030; padding: 1rem; margin-bottom: 1.5rem; color: #9b2c2c;\"\u003e\n  \u003cstrong\u003eCRITICAL WARNING:\u003c\/strong\u003e De-energize the main 3500 power supply modules before physically seating or unseating the backend I\/O module. Attempting to insert the RS485 Ethernet I\/O assembly under power can cause high-voltage transients on the backplane, risking hardware failure on adjacent monitoring modules.\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: flex; align-items: flex-start; margin-bottom: 1rem;\"\u003e\n  \u003cspan style=\"background-color: #2b6cb0; color: #ffffff; border-radius: 50%; width: 24px; height: 24px; display: inline-flex; align-items: center; justify-content: center; margin-right: 0.75rem; flex-shrink: 0; font-weight: bold;\"\u003e1\u003c\/span\u003e\n  \u003cspan style=\"color: #2d3748;\"\u003eInsert the main module into the designated slot on the front of the 3500 rack, ensuring the guide rails align. Secure the captive screws.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; margin-bottom: 1rem;\"\u003e\n  \u003cspan style=\"background-color: #2b6cb0; color: #ffffff; border-radius: 50%; width: 24px; height: 24px; display: inline-flex; align-items: center; justify-content: center; margin-right: 0.75rem; flex-shrink: 0; font-weight: bold;\"\u003e2\u003c\/span\u003e\n  \u003cspan style=\"color: #2d3748;\"\u003eAlign and slide the Ethernet\/RS485 Modbus I\/O module into the corresponding slot on the rear of the rack and hand-tighten the securing fasteners.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; margin-bottom: 1rem;\"\u003e\n  \u003cspan style=\"background-color: #2b6cb0; color: #ffffff; border-radius: 50%; width: 24px; height: 24px; display: inline-flex; align-items: center; justify-content: center; margin-right: 0.75rem; flex-shrink: 0; font-weight: bold;\"\u003e3\u003c\/span\u003e\n  \u003cspan style=\"color: #2d3748;\"\u003eConnect the communication cables (RJ-45 Ethernet or shielded RS485 pairs) and ground the shields in accordance with local industrial electrical standards.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; margin-bottom: 1rem;\"\u003e\n  \u003cspan style=\"background-color: #2b6cb0; color: #ffffff; border-radius: 50%; width: 24px; height: 24px; display: inline-flex; align-items: center; justify-content: center; margin-right: 0.75rem; flex-shrink: 0; font-weight: bold;\"\u003e4\u003c\/span\u003e\n  \u003cspan style=\"color: #2d3748;\"\u003ePower on the rack and load the correct register maps using the 3500 Rack Configuration Software utility.\u003c\/span\u003e\n\u003c\/div\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668300394859,"sku":"3500\/92-04-01-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/350092-04-01-CN-l1e32ifelk5_ae326c0c-684a-48e2-affc-7ff7c6558c9a.jpg?v=1765520518"},{"product_id":"bently-nevada-136180-01-3500-series-communication-gateway-module","title":"Bently Nevada 136180-01 3500 Series Communication Gateway Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eEngineered for seamless integration into critical machinery protection frameworks, the Bently Nevada 136180-01 acts as a highly reliable communication hub for the 3500 monitoring platform. This module is designed to translate and transmit rack monitor data, including direct values, status alerts, and diagnostic variables, to plant-wide control systems without introducing latency. By functioning as the digital bridge within the 3500\/92 interface setup, it enables real-time observation of machinery health directly from centralized operational interfaces.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1a365d; margin-top: 1.5rem; margin-bottom: 0.75rem;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; margin-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-Protocol Support:\u003c\/strong\u003e Handles standard industrial protocols including Modbus RTU over serial and Modbus TCP over Ethernet.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEfficient Data Mapping:\u003c\/strong\u003e Configurable internal register maps allow targeted retrieval of crucial static and dynamic machinery variables.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Speed Processing:\u003c\/strong\u003e Designed to maintain low-latency data updates under intensive SCADA\/DCS polling environments.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiagnostics Integration:\u003c\/strong\u003e Transmits module health, rack configuration errors, and individual channel statuses concurrently with operational data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #1a365d; margin-top: 1.5rem; margin-bottom: 0.75rem;\"\u003eIndustrial Applications\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; margin-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Generation:\u003c\/strong\u003e Linking steam and gas turbine vibration monitors directly to centralized DCS networks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePetrochemical \u0026amp; Refining:\u003c\/strong\u003e Continuous integration of compressor and pump health metrics into main control room operations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy Rotating Machinery:\u003c\/strong\u003e Reliable telemetry transport for remote industrial fans, gearboxes, and expanders.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #1a365d; margin-top: 1.5rem; margin-bottom: 0.75rem;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; width: 100%; margin-bottom: 1.5rem;\"\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; color: #2d3748;\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth style=\"border-bottom: 2px solid #2b6cb0; text-align: left; padding: 10px; color: #1a365d; font-weight: bold;\"\u003eParameter\u003c\/th\u003e\n        \u003cth style=\"border-bottom: 2px solid #2b6cb0; text-align: left; padding: 10px; color: #1a365d; font-weight: bold;\"\u003eValue \/ Specification\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px; font-weight: bold;\"\u003eManufacturer\u003c\/td\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px;\"\u003eBently Nevada\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px; font-weight: bold;\"\u003ePart Number (SKU)\u003c\/td\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px;\"\u003e136180-01\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px; font-weight: bold;\"\u003eAssociated Main Module\u003c\/td\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px;\"\u003e3500\/92 Communication Gateway\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px; font-weight: bold;\"\u003eCommunication Interfaces\u003c\/td\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px;\"\u003eEthernet (10Base-T\/100Base-TX), RS232 \/ RS422 \/ RS485 Serial\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px; font-weight: bold;\"\u003eProtocols Supported\u003c\/td\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px;\"\u003eModbus TCP\/IP, Modbus RTU\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px; font-weight: bold;\"\u003eCountry of Origin\u003c\/td\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px;\"\u003eUnited States\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px; font-weight: bold;\"\u003eShipping Weight (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"border-bottom: 1px solid #e2e8f0; padding: 10px;\"\u003e3.0 kg\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3 style=\"color: #1a365d; margin-top: 1.5rem; margin-bottom: 0.75rem;\"\u003eEmpirical Engineering Insights\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003e\u003cstrong\u003eAlternative Models \u0026amp; Compatibility:\u003c\/strong\u003e The 136180-01 card is the primary processor internal component of the 3500\/92 module. It functions in conjunction with specific I\/O modules installed in the back of the rack. Verify that your system's backplane configuration matches either the Ethernet\/Serial configuration or the dual-serial layout to ensure firmware compatibility.\u003c\/p\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003e\u003cstrong\u003eApplication Pitfalls \u0026amp; Engineering Notes:\u003c\/strong\u003e When operating multiple master interfaces on Modbus TCP, polling frequencies must be managed conservatively. High-frequency sweeps (under 100 milliseconds) by multiple client devices simultaneously can saturate the internal processing queue of the gateway card, leading to intermittent connection timeouts or watchdog resets.\u003c\/p\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003e\u003cstrong\u003eCommissioning \u0026amp; Wiring Tips:\u003c\/strong\u003e If utilizing RS485 serial communication over long distances, ensure that terminating resistors (typically 120 ohms) are correctly enabled at the physical end-of-line nodes. Always run high-quality shielded twisted-pair (STP) cabling separate from high-voltage conduit lines to minimize electromagnetic noise coupling on serial channels.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1a365d; margin-top: 1.5rem; margin-bottom: 0.75rem;\"\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cdiv style=\"background-color: #fff5f5; border-left: 4px solid #c53030; padding: 1rem; margin-bottom: 1.5rem; color: #9b2c2c;\"\u003e\n  \u003cstrong\u003eCRITICAL WARNING:\u003c\/strong\u003e Never install or extract any 3500 series module from the chassis backplane while the rack is powered. Live insertion can result in permanent damage to the electronic components on the 136180-01 card and may disrupt ongoing communication channels on neighboring modules.\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: flex; align-items: flex-start; margin-bottom: 1rem;\"\u003e\n  \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; border-radius: 50%; min-width: 24px; height: 24px; display: flex; align-items: center; justify-content: center; font-weight: bold; margin-right: 12px;\"\u003e1\u003c\/div\u003e\n  \u003cp style=\"color: #2d3748; margin: 0;\"\u003eEnsure the 3500 rack system is completely de-energized before mounting the main module.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; margin-bottom: 1rem;\"\u003e\n  \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; border-radius: 50%; min-width: 24px; height: 24px; display: flex; align-items: center; justify-content: center; font-weight: bold; margin-right: 12px;\"\u003e2\u003c\/div\u003e\n  \u003cp style=\"color: #2d3748; margin: 0;\"\u003eAlign the card with the designated chassis tracks and slide it inward until the connectors are firmly seated in the backplane.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; margin-bottom: 1rem;\"\u003e\n  \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; border-radius: 50%; min-width: 24px; height: 24px; display: flex; align-items: center; justify-content: center; font-weight: bold; margin-right: 12px;\"\u003e3\u003c\/div\u003e\n  \u003cp style=\"color: #2d3748; margin: 0;\"\u003eTighten the front panel retaining screws to secure the unit within the chassis frame.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; margin-bottom: 1.5rem;\"\u003e\n  \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; border-radius: 50%; min-width: 24px; height: 24px; display: flex; align-items: center; justify-content: center; font-weight: bold; margin-right: 12px;\"\u003e4\u003c\/div\u003e\n  \u003cp style=\"color: #2d3748; margin: 0;\"\u003eApply power to the rack, connect your network link, and verify diagnostic status LEDs before initiating software parameter configuration.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668300755307,"sku":"136180-01","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/136180-01-5udcjew1kii_ef48e019-6179-45fb-8127-f6418aa16c01.jpg?v=1765520534"},{"product_id":"bently-nevada-3500-92-03-01-00-3500-series-communication-gateway-module","title":"Bently Nevada 3500\/92-03-01-00 3500 Series Communication Gateway Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eSeamless machinery protection integration is achieved through the \u003cstrong\u003eBently Nevada 3500\/92-03-01-00\u003c\/strong\u003e, a high-performance communication gateway module designed for the 3500 Series machinery protection system. This module facilitates high-speed digital communication by exporting crucial rack data—including current values, monitor statuses, configuration information, and event lists—to external plant control networks.\u003c\/p\u003e\n\n\u003cp\u003eThe specific configuration of the \u003cstrong\u003e3500\/92-03-01-00\u003c\/strong\u003e includes an Ethernet and RS232 Modbus I\/O module, a low memory allocation framework, and no specific hazardous area agency approvals. Utilizing Modbus RTU and Modbus TCP\/IP protocols, this gateway ensures compatible connectivity with Distributed Control Systems (DCS), Programmable Logic Controllers (PLCs), Human-Machine Interfaces (HMIs), and plant historians, eliminating the need for complex custom drivers.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides continuous, high-speed digital data transmission from 3500 racks to external control architectures.\u003c\/li\u003e\n  \u003cli\u003eSupports simultaneous Modbus RTU (serial) and Modbus TCP\/IP (ethernet) communication protocols.\u003c\/li\u003e\n  \u003cli\u003eEquipped with an Ethernet\/RS232 interface for versatile industrial system physical connectivity.\u003c\/li\u003e\n  \u003cli\u003eFront-panel OK LED status indicator provides rapid local diagnostic visual verification.\u003c\/li\u003e\n  \u003cli\u003eLow-memory architecture tailored for efficient, dedicated static and dynamic register mapping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time data integration with industrial Distributed Control Systems (DCS).\u003c\/li\u003e\n  \u003cli\u003eTurbine, compressor, and rotating machinery condition monitoring loops.\u003c\/li\u003e\n  \u003cli\u003ePlant-wide asset management and predictive maintenance database synchronization.\u003c\/li\u003e\n  \u003cli\u003ePower generation, oil and gas processing, and chemical refining control systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption Code\u003c\/th\u003e\n      \u003cth\u003eSelection Definition\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e03\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eEthernet\/RS232 Modbus I\/O Module\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e01\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eLow Memory Capacity\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e00\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eNo Agency Approvals Required\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification Value\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePart Number \/ Model\u003c\/td\u003e\n      \u003ctd\u003e3500\/92-03-01-00\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Series\u003c\/td\u003e\n      \u003ctd\u003e3500 Machinery Protection System\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModule Type\u003c\/td\u003e\n      \u003ctd\u003eCommunication Gateway\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eI\/O Module Option\u003c\/td\u003e\n      \u003ctd\u003eEthernet\/RS232 Modbus I\/O\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMemory Configuration\u003c\/td\u003e\n      \u003ctd\u003eLow Memory\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAgency Approvals\u003c\/td\u003e\n      \u003ctd\u003eNone (Option 00)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower Consumption\u003c\/td\u003e\n      \u003ctd\u003e5.0 watts typical (with RS232\/RS422 I\/O), 5.6 watts typical (with RS485 I\/O)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n      \u003ctd\u003e-30 degC to +65 degC (-22 degF to +150 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStorage Temperature\u003c\/td\u003e\n      \u003ctd\u003e-40 degC to +85 degC (-40 degF to +185 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHumidity Constraints\u003c\/td\u003e\n      \u003ctd\u003e95% non-condensing relative humidity\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShipping Weight\u003c\/td\u003e\n      \u003ctd\u003e2.5 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUSA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eInterface Type\u003c\/th\u003e\n      \u003cth\u003ePhysical Connector \/ Protocol Specification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEthernet Port\u003c\/td\u003e\n      \u003ctd\u003eRJ45 connector supporting Modbus TCP\/IP protocol over 10Base-T\/100Base-TX\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSerial Interface\u003c\/td\u003e\n      \u003ctd\u003eRS232 physical serial connection using standard Modbus RTU framing\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDiagnostic Indicator\u003c\/td\u003e\n      \u003ctd\u003eOK LED on front panel indicating active operating health status\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways install the main 3500\/92 gateway module into a valid monitor slot in a standard 3500 rack.\u003c\/li\u003e\n  \u003cli\u003eEnsure the corresponding Ethernet\/RS232 I\/O module is firmly seated directly behind the main module in the rear of the rack chassis.\u003c\/li\u003e\n  \u003cli\u003eVerify all communication and power connections are secured prior to energizing the rack to prevent interface signal degradation.\u003c\/li\u003e\n  \u003cli\u003eAdhere to recommended signal wiring separation guidelines to isolate communication cables from high-voltage transient fields.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668300788075,"sku":"3500\/92-03-01-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/350092-03-01-00-ynfarp3akob_a8471cfa-cab0-429c-b4f4-3c0c580cb104.jpg?v=1765520535"},{"product_id":"bently-nevada-3500-92-02-01-00-3500-series-communication-gateway","title":"Bently Nevada 3500\/92-02-01-00 3500 Series Communication Gateway","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eProviding direct, high-speed integration between critical machinery protection systems and plant-wide control networks, the \u003cstrong\u003eBently Nevada 3500\/92-02-01-00\u003c\/strong\u003e acts as a reliable communication hub for the 3500 monitoring platform. This module collects static and dynamic data from all other modules in the rack and transmits it to host systems such as DCS, PLC, or SCADA networks. Designed with a \u003cstrong\u003eModbus RS485 I\/O Module\u003c\/strong\u003e and a \u003cstrong\u003eLow Memory\u003c\/strong\u003e configuration, it supports robust serial digital communications. The hardware is configured with no specific agency approvals (Option 00), making it suitable for standard industrial environments requiring seamless integration of diagnostic and machinery status values.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 20px; margin-bottom: 1.5rem;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSerial Integration:\u003c\/strong\u003e Equipped with a dedicated Modbus RS485 interface for reliable, long-distance multi-drop serial configurations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptimized Memory:\u003c\/strong\u003e Features a cost-effective Low Memory architecture designed for standard register mapping requirements.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBackplane Extraction:\u003c\/strong\u003e Automatically gathers comprehensive machinery data including overall values, statuses, and alert levels directly from the 3500 rack backplane.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHot-Swappable Design:\u003c\/strong\u003e Can be removed or replaced under power without interrupting the operation of adjacent protection modules inside the rack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 20px; margin-bottom: 1.5rem;\"\u003e\n  \u003cli\u003eSCADA and distributed control system (DCS) links in power generation facilities.\u003c\/li\u003e\n  \u003cli\u003eCompressor and turbine train status transmission in petrochemical and oil and gas refineries.\u003c\/li\u003e\n  \u003cli\u003eRemote asset condition monitoring networks.\u003c\/li\u003e\n  \u003cli\u003eFactory automation systems requiring unified serial Modbus registers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; width: 100%; margin-bottom: 1.5rem;\"\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; color: #2d3748; font-size: 0.9rem;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"border-bottom: 2px solid #2b6cb0;\"\u003e\n        \u003cth style=\"text-align: left; padding: 8px;\"\u003eOption Code\u003c\/th\u003e\n        \u003cth style=\"text-align: left; padding: 8px;\"\u003eDescription\u003c\/th\u003e\n        \u003cth style=\"text-align: left; padding: 8px;\"\u003eConfiguration Status\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003e3500\/92\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eCommunication Gateway Module\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eStandard Base Module\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003e-02\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eModbus RS485 I\/O Module\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eSelected I\/O Type\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003e-01\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eLow Memory\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eSelected Memory Type\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003e-00\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eNone (No Approvals Required)\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eSelected Approval Option\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; width: 100%; margin-bottom: 1.5rem;\"\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; color: #2d3748; font-size: 0.9rem;\"\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold; width: 30%;\"\u003eManufacturer\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eModel Number\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e3500\/92-02-01-00\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eCommunication Protocol\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eModbus RS485 (RTU \/ ASCII compatible)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eI\/O Module Option\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eModbus RS485 I\/O Module (Option 02)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eMemory Configuration\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eLow Memory (Option 01)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eAgency Approvals\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eNone (Option 00)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003ePower Consumption\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e5.0 Watts typical\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eOperating Temperature\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e-30 degC to +65 degC (-22 degF to +150 degF)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003ePhysical Dimensions\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e24.20 cm x 2.44 cm x 24.10 cm\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eNet Weight\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e0.82 kg (1.81 lbs)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eShipping Weight (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e2.0 kg (4.41 lbs)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eCountry of Origin\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eUnited States (Made in U.S.A.)\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; width: 100%; margin-bottom: 1.5rem;\"\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; color: #2d3748; font-size: 0.9rem;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"border-bottom: 2px solid #2b6cb0;\"\u003e\n        \u003cth style=\"text-align: left; padding: 8px; width: 30%;\"\u003ePort \/ Connector\u003c\/th\u003e\n        \u003cth style=\"text-align: left; padding: 8px;\"\u003eFunctional Specification\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eSerial Port (RS485)\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eEnables 2-wire or 4-wire differential serial Modbus communication with configurable baud rates.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eEthernet Configuration Port\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eFor local 3500 Rack Configuration Software setup and diagnostic connections.\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eEmpirical Engineering Insights\u003c\/h3\u003e\n\n\u003ch3\u003eAlternative Models \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eThe \u003cstrong\u003e3500\/92-02-01-00\u003c\/strong\u003e utilizes the Low Memory configuration (Option 01). While highly effective for small to mid-sized monitoring arrays, systems running dense 3500 configurations with transient data capture or large-scale spectral tracking may exceed register allocation limits. For high-density systems requiring deep historical record extraction or complex multi-protocol configurations, standardizing on the high-memory alternative is often recommended. Note that changing from serial RS485 I\/O to Ethernet interfaces (e.g., Modbus TCP\/IP) requires exchanging both the main module firmware settings and the physical I\/O module on the back of the rack.\u003c\/p\u003e\n\n\u003ch3\u003eApplication Pitfalls \u0026amp; Engineering Notes\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eWhen configuring RS485 networks, a common pitfall is ignoring serial line termination. Without proper termination resistors at the extreme ends of the physical daisy chain, signal reflections can cause intermittent CRC errors or communication dropouts. Additionally, the Low Memory option restricts the number of concurrent poll requests the gateway can process. High polling frequencies (intervals under 50ms) from multiple masters can lead to internal processor bottlenecks and delayed telemetry updates on the host DCS.\u003c\/p\u003e\n\n\u003ch3\u003eCommissioning \u0026amp; Wiring Tips\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748; margin-bottom: 1rem;\"\u003eDuring initial commissioning, verify the polarity of the RS485 network lines. System integrators frequently find that RXD\/TXD and +\/- labeling conventions vary significantly between host PLCs and the 3500\/92. If communication fails during setup, reversing the differential signal lines is an essential diagnostic step. Always utilize high-quality shielded twisted-pair (STP) cabling, and ensure the shield is grounded at only one end of the segment to prevent inductive ground loops from introducing high-frequency noise into the communication path.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cdiv style=\"background-color: #fff5f5; border-left: 4px solid #c53030; padding: 1rem; margin-bottom: 1.5rem; color: #9b2c2c;\"\u003e\n  \u003cstrong\u003eCRITICAL WARNING:\u003c\/strong\u003e De-energize all connected high-voltage loops and follow lock-out\/tag-out (LOTO) protocols prior to accessing the rear I\/O card cage. Do not touch backplane connectors with bare skin; electrostatic discharge (ESD) can permanently damage sensitive CMOS components inside the gateway.\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: flex; flex-direction: column; gap: 1rem; margin-bottom: 1.5rem;\"\u003e\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 1rem;\"\u003e\n    \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; width: 30px; height: 30px; border-radius: 50%; display: flex; align-items: center; justify-content: center; font-weight: bold; flex-shrink: 0;\"\u003e1\u003c\/div\u003e\n    \u003cdiv style=\"color: #2d3748; padding-top: 3px;\"\u003eLocate an empty monitor slot in the 3500 rack. Ensure that the corresponding rear slot is completely clear of any previous I\/O cards or debris.\u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 1rem;\"\u003e\n    \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; width: 30px; height: 30px; border-radius: 50%; display: flex; align-items: center; justify-content: center; font-weight: bold; flex-shrink: 0;\"\u003e2\u003c\/div\u003e\n    \u003cdiv style=\"color: #2d3748; padding-top: 3px;\"\u003eGently slide the main gateway module into the front of the rack along the card guides until it seats firmly into the backplane connector. Secure the module screws.\u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 1rem;\"\u003e\n    \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; width: 30px; height: 30px; border-radius: 50%; display: flex; align-items: center; justify-content: center; font-weight: bold; flex-shrink: 0;\"\u003e3\u003c\/div\u003e\n    \u003cdiv style=\"color: #2d3748; padding-top: 3px;\"\u003eInstall the RS485 I\/O module into the corresponding slot at the rear of the rack. Tighten the rear thumb screws to ensure a positive ground connection to the chassis.\u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 1rem;\"\u003e\n    \u003cdiv style=\"background-color: #2b6cb0; color: #ffffff; width: 30px; height: 30px; border-radius: 50%; display: flex; align-items: center; justify-content: center; font-weight: bold; flex-shrink: 0;\"\u003e4\u003c\/div\u003e\n    \u003cdiv style=\"color: #2d3748; padding-top: 3px;\"\u003eConnect the RS485 communication line to the terminal block. Power up the rack and use the 3500 Configuration Software to assign the Modbus registers and port settings.\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668301410667,"sku":"3500\/92-02-01-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/350092-02-01-00-tyuuuus02pb_cb83ecdb-6fb1-47cc-9f9f-86c66abeec9e.jpg?v=1765520549"},{"product_id":"bently-nevada-3500-92-01-01-00-3500-series-communication-gateway","title":"Bently Nevada 3500\/92-01-01-00 3500 Series Communication Gateway","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eIntegrating machinery protection parameters with plant control systems is highly efficient using the \u003cstrong\u003e3500\/92-01-01-00\u003c\/strong\u003e communication gateway module. This module acts as a bidirectional bridge, collecting valuable static and dynamic data from Bently Nevada 3500 monitoring racks and transmitting it directly to external process control platforms, distributed control systems (DCS), programmable logic controllers (PLCs), or SCADA networks.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3500\/92-01-01-00\u003c\/strong\u003e configuration features a dedicated Modbus RS232\/RS422 I\/O module interface and standard low memory configuration. It translates rack values such as overall vibration levels, alarms, system status, and channel diagnostics into standard Modbus registers. This specific configuration is designed for traditional serial industrial communications without special hazardous area agency approvals, making it suitable for standard control room or purged enclosure installations.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides continuous communication of rack parameters, channel statuses, and alarm events.\u003c\/li\u003e\n  \u003cli\u003eSupports standard Modbus RTU and Modbus ASCII transmission modes.\u003c\/li\u003e\n  \u003cli\u003eEquipped with an RS232\/RS422 serial I\/O module for flexible physical layer integration.\u003c\/li\u003e\n  \u003cli\u003eOptimized for fast updates of critical static monitoring values over serial communication lines.\u003c\/li\u003e\n  \u003cli\u003eSupports configuration via the Bently Nevada 3500 Rack Configuration Software.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePower generation plants requiring vibration data export to central DCS platforms.\u003c\/li\u003e\n  \u003cli\u003eOil and gas facilities integrating rotating machinery monitoring with plant PLCs.\u003c\/li\u003e\n  \u003cli\u003eWater and wastewater treatment installations utilizing serial SCADA networks.\u003c\/li\u003e\n  \u003cli\u003eGeneral industrial balance-of-plant machinery monitoring networks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption Code\u003c\/th\u003e\n      \u003cth\u003eOption Description\u003c\/th\u003e\n      \u003cth\u003eSelected Hardware \/ Configuration\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e01\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eI\/O Module Type\u003c\/td\u003e\n      \u003ctd\u003eModbus RS232\/RS422 I\/O Module\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e01\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eMemory Type\u003c\/td\u003e\n      \u003ctd\u003eLow Memory\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e00\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAgency Approval\u003c\/td\u003e\n      \u003ctd\u003eNone (Standard Location)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eValue \/ Details\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePart Number \/ Model\u003c\/td\u003e\n      \u003ctd\u003e3500\/92-01-01-00\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSeries\u003c\/td\u003e\n      \u003ctd\u003e3500 Series Machinery Protection System\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCommunication Protocols\u003c\/td\u003e\n      \u003ctd\u003eModbus RTU, Modbus ASCII\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePhysical Ports\u003c\/td\u003e\n      \u003ctd\u003eRS-232, RS-422 (via serial I\/O module)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMemory Architecture\u003c\/td\u003e\n      \u003ctd\u003eLow Memory Option\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.44 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eU.S.A.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n      \u003ctd\u003e-30 to +65 degC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStorage Temperature Range\u003c\/td\u003e\n      \u003ctd\u003e-40 to +85 degC\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePort \/ Connection\u003c\/th\u003e\n      \u003cth\u003eInterface Standard\u003c\/th\u003e\n      \u003cth\u003ePurpose\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHost Serial Port\u003c\/td\u003e\n      \u003ctd\u003eRS-232 \/ RS-422\u003c\/td\u003e\n      \u003ctd\u003eConnection to DCS, PLC, or SCADA Modbus Master\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConfiguration Port\u003c\/td\u003e\n      \u003ctd\u003eRS-232\u003c\/td\u003e\n      \u003ctd\u003eRack configuration and serial utility software interface\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlot Assignment:\u003c\/strong\u003e Ensure the main 3500\/92 module is placed in any slot other than Slot 1 (reserved for the Power Supply) or the Rack Interface Module (RIM) slot.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable Lengths:\u003c\/strong\u003e For RS-232 serial links, restrict physical cabling to 15 meters maximum to prevent signal attenuation. For RS-422 serial links, distance may be extended up to 1200 meters using high-quality shielded twisted-pair (STP) wiring.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShielding \u0026amp; Grounding:\u003c\/strong\u003e Ensure the outer shield of communication cables is securely terminated to the chassis\/instrument ground at one end only to prevent ground loop interference.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668306915691,"sku":"3500\/92-01-01-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/350092-01-01-00-4ybanjswcdu_f036da4d-35ab-473a-bbee-e4ad74bd8087.jpg?v=1765520694"},{"product_id":"bently-nevada-136180-01-136188-01-3500-92-communication-gateway-module-ethernet-rs232-modbus-i-o-module","title":"Bently Nevada 136180-01+136188-01 3500\/92 Communication Gateway Module + Ethernet\/RS232 Modbus I\/O Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e136180-01+136188-01\u003c\/strong\u003e combination consists of the \u003cstrong\u003e3500\/92 Communication Gateway Module\u003c\/strong\u003e main card (136180-01) and the associated \u003cstrong\u003eEthernet\/RS232 Modbus I\/O Module\u003c\/strong\u003e rear card (136188-01). This module set establishes digital communication links between the Bently Nevada 3500 Machinery Protection System and external plant automation platforms.\u003c\/p\u003e\n\u003cp\u003eThe gateway collects static measurement data, system event lists, and alarm statuses directly from the 3500 rack backplane and translates the information into standard Modbus protocols. Utilizing the \u003cstrong\u003e136188-01\u003c\/strong\u003e rear I\/O card, it offers hardware interfaces for Modbus communication over Ethernet networks and point-to-point RS232 serial connections. Plant operators use the \u003cstrong\u003e136180-01+136188-01\u003c\/strong\u003e to integrate vibration monitoring values, thrust positioning, and system diagnostic events directly into Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), and Human-Machine Interfaces (HMI).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrates the 3500\/92 main monitor board with an Ethernet\/RS232 rear I\/O card.\u003c\/li\u003e\n\u003cli\u003eSupports Modbus TCP\/IP communication over Ethernet and Modbus RTU\/ASCII over serial connections.\u003c\/li\u003e\n\u003cli\u003eTransmits static values, alarm events, and system statuses across redundant digital channels.\u003c\/li\u003e\n\u003cli\u003eConfigurable Modbus register mapping via 3500 System Rack Configuration Software.\u003c\/li\u003e\n\u003cli\u003eMaintains galvanic isolation between field interfaces and the internal rack logic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntegration of 3500 machinery protection data into DCS and PLC networks\u003c\/li\u003e\n\u003cli\u003eRemote monitoring of turbomachinery static vibration and position parameters\u003c\/li\u003e\n\u003cli\u003eIndustrial automation control loops requiring real-time machinery state data\u003c\/li\u003e\n\u003cli\u003ePlant-wide condition monitoring and data historian integration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain Card Part Number\u003c\/td\u003e\n\u003ctd\u003e136180-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eI\/O Module Part Number\u003c\/td\u003e\n\u003ctd\u003e136188-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eCommunication Gateway Module + Ethernet\/RS232 Modbus I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtocols\u003c\/td\u003e\n\u003ctd\u003eModbus TCP\/IP, Modbus RTU, Modbus ASCII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Port\u003c\/td\u003e\n\u003ctd\u003e10BASE-T \/ 100BASE-TX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial Port\u003c\/td\u003e\n\u003ctd\u003eRS232 (Configurable baud rate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-30 degC to +65 degC (-22 degF to +149 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40 degC to +85 degC (-40 degF to +185 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003e95%, noncondensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack Space\u003c\/td\u003e\n\u003ctd\u003e1 full-height front slot (Main Card) + 1 full-height rear slot (I\/O Card)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003ePort \/ Terminal\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRJ45 Ethernet\u003c\/td\u003e\n\u003ctd\u003eModbus TCP\/IP Network Connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS232 Serial Port\u003c\/td\u003e\n\u003ctd\u003eSerial Modbus RTU \/ ASCII Connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the 136180-01 main card into a full-height slot on the front of the 3500 rack.\u003c\/li\u003e\n\u003cli\u003eMount the 136188-01 I\/O module in the rear of the rack directly behind the 136180-01 main card.\u003c\/li\u003e\n\u003cli\u003eEnsure cable shields are grounded according to system installation practices to minimize EMI\/RFI noise.\u003c\/li\u003e\n\u003cli\u003eConfigure Modbus slave address, baud rate, and network IP settings through the 3500 System Configuration Software prior to commissioning.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668314354027,"sku":"136180-01+136188-01","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/136180-01_136188-01-wjzv3sh0odw.jpg?v=1765519455"},{"product_id":"bently-nevada-3500-91-01-cn-egd-communication-gateway-module","title":"Bently Nevada 3500\/91-01-CN EGD Communication Gateway Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e3500\/91-01-CN\u003c\/strong\u003e is an Ethernet Global Data (EGD) communication gateway module designed for the Bently Nevada 3500 machinery protection system. This module provides comprehensive communication capabilities for transmitting 3500 rack-monitored values, statuses, data values (float), and setpoints (float) over an Ethernet network path. It interfaces directly with EGD protocol compatible controllers to deliver response times suitable for demanding industrial controller applications. The module enables integration via Ethernet UDP\/IP frames , processing both producer exchanges and consumer exchanges such as group resets, group trip multiplies, group alarm inhibits, and group special alarm inhibits.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides integration of 3500 rack values with EGD protocol compatible controllers.\u003c\/li\u003e\n\u003cli\u003eHigh-speed data transfer via Ethernet UDP\/IP protocol.\u003c\/li\u003e\n\u003cli\u003eSupports EGD version 2.01 protocol.\u003c\/li\u003e\n\u003cli\u003eFront panel LEDs indicate module operational health (OK LED) and rack communication status ($TX\/RX$ LED).\u003c\/li\u003e\n\u003cli\u003eAccommodates different physical layers including 10BASE-T\/100BASE-TX (twisted pair) and 100BASE-FX (fiber optic) via interchangeable I\/O modules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMachinery protection and condition monitoring systems.\u003c\/li\u003e\n\u003cli\u003eDistributed Control System (DCS) and Programmable Logic Controller (PLC) integration.\u003c\/li\u003e\n\u003cli\u003ePower generation facilities, petrochemical plants, and heavy industrial processing environments requiring real-time machinery asset data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eCode\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3500\/91\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEGD Communication Gateway \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-AA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain Module Type\u003c\/strong\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e01\u003c\/td\u003e\n\u003ctd\u003eEGD Communication Gateway Module \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-BB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI\/O Module Type\u003c\/strong\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e01\u003c\/td\u003e\n\u003ctd\u003eEthernet 10BASE-T\/100BASE-TX I\/O Module \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eEthernet 100BASE-FX I\/O Module \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-CC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAgency Approval Option\u003c\/strong\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNone \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e01\u003c\/td\u003e\n\u003ctd\u003eCSA\/NRTL\/C \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eCSA\/A \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3500\/91-01-CN \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEGD Communication Gateway Module \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnited States of America\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.4 watts typical \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eData Types Supported\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRack, Module, Channel, and Data value Status; Data values (float); Setpoints (float) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProducer Exchanges\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStatus, Data values, Setpoints \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConsumer Exchanges\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGroup Reset, Group Trip Multiply, Group Alarm Inhibit, Group Special Alarm Inhibit \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtocols\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEGD Version 2.01, Ethernet UDP\/IP frame, IEEE 802.3 CSMA\/CD \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCommunication Link\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEthernet 10-Mbps and 100-Mbps (conforms to IEEE 802.3 and IEEE 802.3u) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain Module Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain Module Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.79 kg (1.75 lbs.) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eI\/O Module Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eI\/O Module Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.39 kg (0.85 lbs.) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRack Space - Main Module\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 full-height front slot \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRack Space - I\/O Module\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 full-height rear slot \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30 degC to +65 degC (-22 degF to +150 degF) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 degC to +85 degC (-40 degF to +185 degF) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHumidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e95%, noncondensing \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eConnections\/Interfaces\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eConnector \/ Jack Type\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEthernet 10BASE-T\/100BASE-TX I\/O Module\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRJ-45 jack \u003c\/td\u003e\n\u003ctd\u003eTwisted pair Ethernet network communication link \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEthernet 100BASE-FX I\/O Module\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMT-RJ jack \u003c\/td\u003e\n\u003ctd\u003eFiber optic Ethernet network communication link \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack Allocation:\u003c\/strong\u003e Install the main module into one full-height front slot of the 3500 rack. The associated I\/O module must be positioned directly behind it in the corresponding full-height rear slot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Requirements:\u003c\/strong\u003e This module requires Version 3.70 or higher of the 3500 Rack Configuration Software for setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Interfacing:\u003c\/strong\u003e The module must interface with a 3500\/22M Transient Data Interface (TDI) utilizing firmware version 1.20 or higher to successfully communicate with individual monitor modules.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Constraints:\u003c\/strong\u003e Only one EGD module is permitted per 3500 rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware Requirements:\u003c\/strong\u003e For consumed exchange support, version 2.21 or higher of the 4-Channel firmware is mandatory.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFCC:\u003c\/strong\u003e Complies with part 15 of the FCC Rules regarding harmful interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMC:\u003c\/strong\u003e European Community Directive 2014\/30\/EU; Standards EN 61000-6-2 (Immunity for Industrial Environments) and EN 61000-6-4 (Emissions for Industrial Environments).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Safety:\u003c\/strong\u003e European Community Directive 2014\/35\/EU (LV Directive) conforming to Standard EN 61010-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoHS:\u003c\/strong\u003e European Community Directive 2011\/65\/EU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaritime:\u003c\/strong\u003e DNV GL rules for classification (Ships, offshore units, high speed\/light craft) and ABS Rules for Condition of Classification (Part 1, Steel Vessels Rules, Offshore Units and Structures).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHazardous Area Approvals:\u003c\/strong\u003e * CNRTLUS: Class I, Zone 2: AEx\/Ex nA nC ic IIC T4 Gc; Class I, Zone 2: AEx\/Ex ec nC ic IIC T4 Gc; Class I, Division 2, Groups A, B, C, and D; T4 @ Ta = -20 degC to +65 degC when installed per drawing 149243 or 149244.\n\u003cul\u003e\n\u003cli\u003eATEX\/IECEx: Ex II 3 G; Ex nA nc ic IIC T4 Gc; Ex ec nc ic IIC T4 Gc; T4 @ Ta = -20 degC to +65 degC when installed per drawing 149243 or 149244.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668316451179,"sku":"3500\/91-01-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/350091-01-cn-ygbjwokwszl_2878221e-1090-4efd-aecb-023db00e71df.jpg?v=1765521038"},{"product_id":"abb-tc630-3bse002253r1-communication-module","title":"ABB TC630 3BSE002253R1 Communication Module","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cspan class=\"citation-35\"\u003eThe ABB\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003eTC630\u003c\/strong\u003e\u003cspan class=\"citation-35\"\u003e\u003cspan\u003e \u003c\/span\u003e(\u003c\/span\u003e\u003cstrong\u003e3BSE002253R1\u003c\/strong\u003e\u003cspan class=\"citation-35 citation-end-35\"\u003e) is a high-reliability optical modem designed for the Advant Fieldbus 100 (AF 100) communication network.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eIt functions as a critical interface for converting signals between coaxial and optical media or vice-versa, enabling extended distance communication within the Advant OCS (Open Control System) architecture. Operating on a 24V DC power supply, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTC630\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esupports fiber optic specifications of 2 x 62.5\/125 µm or 100\/400 µm, utilizing industry-standard ST-style connectors. This module is primarily deployed in Advant Controller 110, 160, 410, and 450 environments, as well as S800 I\/O systems, providing galvanic isolation and noise immunity for long-distance fieldbus segments in power plants and heavy industrial facilities.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTC630\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct ID\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e3BSE002253R1\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eABB\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCommunication Module \/ Optical Modem\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProtocol\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAdvant Fieldbus 100 (AF 100)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eInput Voltage\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e24V DC\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eFiber Compatibility\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2 x 62.5\/125 µm or 100\/400 µm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eST-Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eMedia Conversion\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCoaxial\/Optical or Optical\/Coaxial\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e65 mm x 11 mm x 47 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.715 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eWEEE Category\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e5. Small Equipment\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eWhen procuring replacements for Advant Master or MOD 300 systems, verify the specific Product ID as this module is often part of larger maintenance kits.\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProduct ID:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3BSE002253R1\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eABB Type Designation:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTC630\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eKit Reference:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOften associated with 3BSE004442R1 (TC630K03)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCustoms Tariff Number:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e85176200\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003ch3\u003eOptical Fiber Selection and Link Budget\u003c\/h3\u003e\n\u003cp\u003e\u003cspan class=\"citation-34\"\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003eTC630\u003c\/strong\u003e\u003cspan class=\"citation-34 citation-end-34\"\u003e\u003cspan\u003e \u003c\/span\u003esupports two distinct fiber optic core sizes.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eFor standard industrial applications, 62.5\/125 µm multi-mode fiber is typical. Ensure that the total optical link budget does not exceed the attenuation limits defined in the Advant Fieldbus 100 User Manual. Exceeding these limits can result in intermittent communication drops or high error rates on the AF 100 bus.\u003c\/p\u003e\n\u003ch3\u003ePower Supply and Grounding\u003c\/h3\u003e\n\u003cp\u003eThe module requires a stable 24V DC source. In distributed control architectures, it is recommended to use a redundant power supply to ensure network availability. While the optical link provides inherent galvanic isolation between bus segments, the coaxial side must be handled according to standard AF 100 grounding rules to prevent ground loops.\u003c\/p\u003e\n\u003ch3\u003eMaintenance and Replacement\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTC630\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis frequently used in preventive maintenance cycles for Advant Controller 450 and 160 systems. Note that this part is exempted from the scope of 2011\/65\/EU (RoHS) as per Article 2(4) for specific industrial control system applications. When replacing a modem, ensure the ST-connectors are cleaned with lint-free wipes and isopropyl alcohol to prevent signal loss due to dust contamination.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668496445803,"sku":"3BSE002253R1","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-tc630-3bse002253r1-communication-module-llwdrll1xhn_9479a755-1707-4ef0-a516-c7768a2d0b7d.jpg?v=1765532362"},{"product_id":"abb-3bse056478r1-pu410-800xa-system-communication-box","title":"ABB 3BSE056478R1 PU410 800xA System Communication Box","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003ePU410\u003c\/strong\u003e (Product ID \u003cstrong\u003e3BSE056478R1\u003c\/strong\u003e) is an industrial infrastructure component designed to manage data routing and network translation within distributed architectures. Functioning as a dedicated \u003cstrong\u003eCommunication Box\u003c\/strong\u003e, this device bridges specialized control network subsystems to ensure reliable and secure data pathways between processing units and supervisory platforms. Engineered for harsh industrial environments, the module coordinates discrete messaging protocols, safeguards signal integrity under external electrical interference, and supports continuous diagnostics across active processing channels. It serves as an essential link for extending system configurations or performing legacy retrofits, maintaining continuous data loops without introducing signal lag or timing errors to critical machinery tracking tasks.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Network Interface:\u003c\/strong\u003e Provides reliable physical signal translation and protocol bridging for complex system control communications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Hardware Footprint:\u003c\/strong\u003e Encased in a ruggedized enclosure optimized for space-restricted industrial enclosures and field boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Operational Stability:\u003c\/strong\u003e Component selection is rated to deliver steady communication execution during ongoing factory thermal shifts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Component Replacement:\u003c\/strong\u003e Serves as a traceable industrial spare part fully compatible with established system layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDistributed Network Bridge Operations and Peer-to-Peer Data Routing in Automated Processing Plants\u003c\/li\u003e\n\u003cli\u003eLegacy Subsystem Upgrades, Protocol Translation, and Signal Interfacing within Plant Operations\u003c\/li\u003e\n\u003cli\u003eExtended Field Infrastructure Connections for Centralized Monitoring Control Networks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ch4\u003eMechanical\u003c\/h4\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel \/ Global Commercial Alias\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePU410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct ID\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3BSE056478R1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eABB Type Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePU410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Name\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCommunication Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSpare_Parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Size Class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSpare_Parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSweden (SE) \/ Germany (DE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.39 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGross Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.39 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSelling Unit of Measure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003epiece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCustoms Tariff Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85389091\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplacement Product ID (NEW)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3BSE051826R1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch4\u003eEnvironmental\u003c\/h4\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWEEE Category\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eProduct Not in WEEE Scope\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Grounding Sequence:\u003c\/strong\u003e Ensure the metal frame or shielding ground terminal is tied directly to the common plant earth ground rail before connecting data communication leads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData Line Shield Termination:\u003c\/strong\u003e Properly terminate shielded communication cables at the device interface to mitigate high-frequency electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration-Resistant Mounting:\u003c\/strong\u003e Secure the box firmly to its designated mounting bracket or enclosure base to eliminate loose physical contact and signal degradation under factory vibration stress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Cable Segregation:\u003c\/strong\u003e Route communication data pathways through dedicated low-voltage conduits, keeping them separate from high-power AC supply cables.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668496740715,"sku":"PU410 3BSE056478R1","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-pu410-3bse056478r1-rta-communication-box-for-mb300-t0ep4rh2ezw_7105ad11-2ab8-4cf1-addf-fe7a3dfb7965.jpg?v=1765532427"},{"product_id":"abb-dsca160a-communication-processor","title":"ABB DSCA160A Communication Processor","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe ABB DSCA160A is a dedicated communication processor designed for integration within the ABB MasterPiece T200 process automation and distributed control system architecture. This module operates as a specialized communications interface and routing node, managing data traffic and protocol handling across system buses to facilitate deterministic data exchange between distributed controllers and operator stations.\u003c\/p\u003e\n\u003cp\u003eEngineered for high-availability industrial automation environments, the DSCA160A executes real-time data processing and network management tasks without degrading controller cycle times. Its hardware layout is tailored for standard industrial rack mounting, incorporating diagnostic indicators to verify operational status, communication link activity, and hardware health directly from the subrack.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNative hardware compatibility with ABB MasterPiece T200 control systems\u003c\/li\u003e\n  \u003cli\u003eFunctions as a high-performance communication processor and Ethernet routing node\u003c\/li\u003e\n  \u003cli\u003eSupports deterministic real-time data exchange across system interfaces\u003c\/li\u003e\n  \u003cli\u003eEquipped with front-panel diagnostic indicators for link status and module health\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct installation in standard automation subracks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDistributed control system network expansion and node interfacing\u003c\/li\u003e\n  \u003cli\u003eReal-time process data routing between MasterPiece T200 controllers and supervisory networks\u003c\/li\u003e\n  \u003cli\u003eLegacy industrial automation network modernization and drop-in replacement\u003c\/li\u003e\n  \u003cli\u003eMulti-controller data aggregation in continuous process manufacturing plants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBrand\u003c\/td\u003e\n      \u003ctd\u003eABB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModel \/ Catalog Number\u003c\/td\u003e\n      \u003ctd\u003eDSCA160A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eCommunication Processor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Family\u003c\/td\u003e\n      \u003ctd\u003eMasterPiece T200\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCommunication Service\u003c\/td\u003e\n      \u003ctd\u003eEthernet Router \/ System Bus Interface\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eSweden\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight\u003c\/td\u003e\n      \u003ctd\u003e0.58 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e2.44 x 25.0 x 2.1 cm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668510273899,"sku":"DSCA160A","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-dsca160a-communication-processor-ucfjjsoj3ev_4abeaa28-37e8-46ae-a22b-5d88b6f014d6.jpg?v=1765532528"},{"product_id":"abb-ci840a-3bse041882r1-profibus-communication-interface-redundant","title":"ABB CI840A 3BSE041882R1 Profibus Communication Interface - Redundant","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe ABB CI840A (3BSE041882R1) is a redundant PROFIBUS DP-V1 communication interface module engineered for integration within the ABB S800 I\/O distributed control architecture. This module provides a high-availability master interface for connecting PROFIBUS field devices to AC 800M controllers via the ModuleBus. It facilitates deterministic cyclic and acyclic data exchange, supporting redundant controller configurations to eliminate single points of failure in process automation loops.\u003c\/p\u003e\n\u003cp\u003eDesigned for rail mounting on modular BasePlate configurations, the CI840A handles master-level communication tasks, parsing field instrumentation data and executing parameterization commands. Its hot-swap capability allows module replacement without interrupting the active process control loop, ensuring continuous operation in continuous-process industries.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRedundant PROFIBUS DP-V1 master communication interface support for high-availability S800 I\/O station architectures\u003c\/li\u003e\n  \u003cli\u003eDual optical or electrical interface options for connection to redundant AC 800M controller CPU configurations\u003c\/li\u003e\n  \u003cli\u003eSupports up to 124 PROFIBUS slaves per master interface with baud rates up to 12 Mbps\u003c\/li\u003e\n  \u003cli\u003eHot-pluggable module design enabling online replacement on MT810 or MT815 BaseUnits\u003c\/li\u003e\n  \u003cli\u003eComprehensive diagnostic LED indicators for power, module status, communication health, and token ring status\u003c\/li\u003e\n  \u003cli\u003eGalvanic isolation between field communication circuits and internal ModuleBus electronics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDistributed control system (DCS) S800 I\/O rack communication expansion\u003c\/li\u003e\n  \u003cli\u003eRedundant fieldbus master drop for continuous chemical and petrochemical processing\u003c\/li\u003e\n  \u003cli\u003eHigh-availability PROFIBUS DP network polling for smart instrumentation and actuators\u003c\/li\u003e\n  \u003cli\u003ePower generation turbine and auxiliary control loop interfacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eABB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct ID \/ Ordering Code\u003c\/td\u003e\n      \u003ctd\u003e3BSE041882R1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModel\u003c\/td\u003e\n      \u003ctd\u003eCI840A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eProfibus Communication Interface - Redundant\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Family\u003c\/td\u003e\n      \u003ctd\u003eS800 I\/O\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCommunication Protocol\u003c\/td\u003e\n      \u003ctd\u003ePROFIBUS DP, DP-V1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTransmission Speed\u003c\/td\u003e\n      \u003ctd\u003eUp to 12 Mbps (automatic baud rate detection)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMax Slaves Supported\u003c\/td\u003e\n      \u003ctd\u003e124 DP slaves per interface\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRedundancy Support\u003c\/td\u003e\n      \u003ctd\u003eYes (Media and Controller Redundancy)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModuleBus Connection\u003c\/td\u003e\n      \u003ctd\u003eOptical \/ Electrical via BaseUnit\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNominal Voltage\u003c\/td\u003e\n      \u003ctd\u003e24 VDC supplied via BaseUnit\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCurrent Consumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 250 mA at 24 VDC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDegree of Protection\u003c\/td\u003e\n      \u003ctd\u003eIP20\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Type\u003c\/td\u003e\n      \u003ctd\u003eDIN Rail (via S800 BaseUnit)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eSweden\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003ctd\u003eCE Compliant\u003c\/td\u003e\n  \u003ctd\u003eRoHS Compliant\u003c\/td\u003e\n  \u003ctd\u003ePROFIBUS DP conformance tested (PNO certified)\u003c\/td\u003e\n  \u003ctd\u003eHazardous Location: cULus HazLoc (Class I, Div 2)\u003c\/td\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668510568811,"sku":"CI840A 3BSE041882R1","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-ci840a-3bse041882r1-profibus-communication-interface-redundant-2mmcsmrabkz_40043753-00c0-4c43-9395-31698f5a4eec.jpg?v=1765532535"},{"product_id":"abb-3asd489301a410-ypk-107e-legacy-dc-drives-communication-module","title":"ABB 3ASD489301A410 YPK 107E Legacy DC Drives Communication Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748;\"\u003eThe ABB 3ASD489301A410 YPK 107E is a multi-processor communication board configured with integrated operational software for legacy industrial DC drive systems. Operating as a core data routing interface within specialized drive intelligence networks, this component processes multi-processor commands and manages critical synchronization tasks across distributed drive components. The assembly provides structural backplane connectivity and protocol processing to maintain clean signal pathways, serving as an engineered replacement to resolve communication time-outs, node dropouts, and command processing faults in legacy drive infrastructure.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 20px;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-Loaded Firmware:\u003c\/strong\u003e Shipped complete with factory MP-COMM system software pre-installed on the onboard logic chips.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad Legacy Support:\u003c\/strong\u003e Engineered explicitly for industrial DC drive control racks utilizing legacy multi-processor architectures.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Model Supercession:\u003c\/strong\u003e Serves as the factory-designated direct replacement for obsolete product IDs YT204001-EC and YT204001-HC.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChassis Mounting:\u003c\/strong\u003e Rigid PCB frame architecture with integrated interface pin headers for standardized rack backplane insertion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 20px;\"\u003e\n  \u003cli\u003eOverhaul and logic board replacement in legacy ABB industrial DC drive systems.\u003c\/li\u003e\n  \u003cli\u003eMulti-processor network stabilization in metals processing, rolling mills, and mining sector drive control panels.\u003c\/li\u003e\n  \u003cli\u003eUpgrading degraded communication interfaces showing intermittent data transmission errors or frame drops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; width: 100%;\"\u003e\n  \u003ctable style=\"width: 100%; border-collapse: collapse; color: #2d3748;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"border-bottom: 2px solid #1a365d; text-align: left;\"\u003e\n        \u003cth style=\"padding: 8px; font-weight: bold;\"\u003eParameter\u003c\/th\u003e\n        \u003cth style=\"padding: 8px; font-weight: bold;\"\u003eValue\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eManufacturer\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eABB\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eABB Type Designation\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eYPK 107E\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eProduct ID\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e3ASD489301A410\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eReplaced Product IDs (Old)\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eYT204001-EC, YT204001-HC\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eSoftware Integration\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eMP-COMM Software Included\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003ePart Type\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eOriginal New\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eUNSPSC Classification\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e39120000\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eCountry of Origin\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eSweden (SE)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eCustoms Tariff Number\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e85389091\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eProduct Net Weight\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e0.390 kg\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eShipping Weight (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e0.650 kg\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003ePackage Dimensions (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e240 x 170 x 60 mm\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cdiv style=\"background-color: #fff5f5; border-left: 4px solid #c53030; padding: 12px; margin-bottom: 15px;\"\u003e\n  \u003cstrong style=\"color: #9b2c2c;\"\u003eCRITICAL WARNING:\u003c\/strong\u003e\n  \u003cp style=\"color: #9b2c2c; margin: 4px 0 0 0;\"\u003eDisconnect and lock out all AC mains and auxiliary power feeds to the drive enclosure before removing processing hardware. High-voltage DC buses retain hazardous charges even after power-down. Verify that bus capacitor voltages have fully discharged to safe levels using a certified voltmeter before handling internal circuitry.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"margin-bottom: 10px;\"\u003e\n  \u003cdiv style=\"display: inline-block; background-color: #2b6cb0; color: #ffffff; width: 24px; height: 24px; border-radius: 50%; text-align: center; font-weight: bold; margin-right: 8px;\"\u003e1\u003c\/div\u003e\n  \u003cdiv style=\"display: inline-block; color: #2d3748;\"\u003eAttach an approved, tested electrostatic discharge wrist strap to a verified bare-metal chassis ground point prior to opening the anti-static packaging.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"margin-bottom: 10px;\"\u003e\n  \u003cdiv style=\"display: inline-block; background-color: #2b6cb0; color: #ffffff; width: 24px; height: 24px; border-radius: 50%; text-align: center; font-weight: bold; margin-right: 8px;\"\u003e2\u003c\/div\u003e\n  \u003cdiv style=\"display: inline-block; color: #2d3748;\"\u003eTag and disconnect all internal ribbon interfaces, serial cables, and terminal connections from the active board face to prevent strain on external harnesses.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"margin-bottom: 10px;\"\u003e\n  \u003cdiv style=\"display: inline-block; background-color: #2b6cb0; color: #ffffff; width: 24px; height: 24px; border-radius: 50%; text-align: center; font-weight: bold; margin-right: 8px;\"\u003e3\u003c\/div\u003e\n  \u003cdiv style=\"display: inline-block; color: #2d3748;\"\u003eLoosen the retaining screws, unlatch the card guides, and slide the legacy board smoothly out from the subrack backplane connectors.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"margin-bottom: 10px;\"\u003e\n  \u003cdiv style=\"display: inline-block; background-color: #2b6cb0; color: #ffffff; width: 24px; height: 24px; border-radius: 50%; text-align: center; font-weight: bold; margin-right: 8px;\"\u003e4\u003c\/div\u003e\n  \u003cdiv style=\"display: inline-block; color: #2d3748;\"\u003eAlign the new board along the mounting tracks, push firmly until seated into the rear backplane socket, tighten retention fasteners, and reconnect all communication lines.\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668513976683,"sku":"3ASD489301A410","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-ypk107e-3asd489301a410-circuit-board-qxhocymxbxl_a2b73782-b229-4506-a115-25d6c7a5e36b.jpg?v=1765532605"},{"product_id":"abb-rdco-02c-ddcs-communication-option-module","title":"ABB RDCO-02C DDCS Communication Option Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eRDCO-02C\u003c\/strong\u003e is an add-on communication option module designed to handle high-speed data transmission and fieldbus networking within variable speed drive configurations. This module functions as an industrial interface board that establishes \u003cstrong\u003eDDCS communication\u003c\/strong\u003e channels for the RMIO Motor Control and I\/O board or BCU control units. Operating as a bridge for fiber optic connections, the board contains four discrete optical channels (CH0, CH1, CH2, and CH3) used to network overriding systems, local peripheral options, master-follower drive links, and diagnostic PC tools. Equipped with a coated circuit board to ensure protection against environmental degradation , the \u003cstrong\u003eRDCO-02C\u003c\/strong\u003e provides deterministic signaling and robust noise immunity essential for reliable automated operations in demanding industrial sectors.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete fiber optic communication interface with four integrated transmitter\/receiver connector pairs \u003c\/li\u003e\n\u003cli\u003eFeatures a coated circuit board (indicated by the C suffix) to provide enhanced protection in standard industrial applications \u003c\/li\u003e\n\u003cli\u003eDirect electrical integration through a built-in 20-pin pinheader that connects power and signal directly to the drive control unit \u003c\/li\u003e\n\u003cli\u003eFlexible media capability supporting plastic optical fiber (POF) and Hard Clad Silica (HCS) physical lines \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-speed master-follower variable speed drive coordination links \u003c\/li\u003e\n\u003cli\u003eOverriding system fieldbus adapter interfacing and data communication bridging \u003c\/li\u003e\n\u003cli\u003eDrive parameter monitoring and external I\/O configuration expansion networks \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eABB \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRDCO-02C \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDDCS Communication Option Module \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel CH0 Optical Component\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 MBd \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel CH1 Optical Component\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 MBd \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel CH2 Optical Component\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 MBd \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel CH3 Optical Component\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 MBd \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported Communication Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1, 2 or 4 Mbit\/s \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20-pin pinheader \/ Agilent Technologies Versatile Link pairs \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+5 V DC ±10% (supplied by drive control unit) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCurrent Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 mA max. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDegree of Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP 20 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 mm x 95 mm x 34 mm \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety Rules:\u003c\/strong\u003e Ensure all mains input voltages and external dangerous voltages from control circuits are fully isolated and locked out before initiating work on the system. Always wait 5 minutes for the intermediate circuit capacitors to completely discharge after cutting power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD Prevention:\u003c\/strong\u003e The internal board assemblies carry micro-circuits highly susceptible to electrostatic breakdown. Personnel must wear an earthing wrist band when handling the equipment and avoid touching component traces unnecessarily.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Alignment:\u003c\/strong\u003e Insert the module safely into the designated slot marked with \"DDCS\" until the plastic clips engage into position. Fasten the two supplied M3x8 screws securely; these provide the structural earth path and interconnect module and board grounds to fulfill local EMC requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical Handling:\u003c\/strong\u003e Do not touch the fiber optic endpoints with bare hands since the interfaces are sensitive to surface dirt. Verify that cable long-term tensile loads remain below 1 N and respect a minimum short-term bend radius of 35 mm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668514468203,"sku":"RDCO-02C","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-rdco-02c-communication-adapter-srrgkhmqz1n_ca7dd0dd-855a-4af7-905b-288bb9fb02a1.jpg?v=1765532625"},{"product_id":"abb-dsca180b-57520001-gz-communications-module","title":"ABB DSCA180B 57520001-GZ Communications Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe ABB DSCA180B 57520001-GZ is a specialized communications module engineered for integration within ABB MasterPiece T200 distributed control systems. This hardware unit functions as an Ethernet router, enabling reliable data exchange and network connectivity across industrial automation architectures. Designed specifically for legacy process control environments, the module facilitates seamless communication between system nodes to support continuous plant operations.\u003c\/p\u003e\n\u003cp\u003eBuilt for industrial control room deployment, the DSCA180B 57520001-GZ integrates directly into standard MasterPiece T200 rack subracks. It acts as a dedicated routing interface, managing network traffic and data packets within the control network hierarchy. The unit requires proper backplane mounting and appropriate environmental controls to ensure uninterrupted communication services in process industries.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for ABB MasterPiece T200 DCS platforms\u003c\/li\u003e\n  \u003cli\u003eFunctions as an integrated Ethernet router for industrial networks\u003c\/li\u003e\n  \u003cli\u003eStandardized form factor for rack-based subrack mounting\u003c\/li\u003e\n  \u003cli\u003eFacilitates high-speed data transmission and node-to-node communication\u003c\/li\u003e\n  \u003cli\u003eEngineered for continuous operation in demanding industrial control environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eABB MasterPiece T200 Distributed Control Systems (DCS)\u003c\/li\u003e\n  \u003cli\u003eLegacy industrial automation and process control networks\u003c\/li\u003e\n  \u003cli\u003ePower generation and distribution plant monitoring\u003c\/li\u003e\n  \u003cli\u003eOil, gas, and chemical processing facilities\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eABB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExact Model\u003c\/td\u003e\n      \u003ctd\u003eDSCA180B\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrdering Number \/ SKU\u003c\/td\u003e\n      \u003ctd\u003e57520001-GZ\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eCommunications Module \/ Ethernet Router\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Family\u003c\/td\u003e\n      \u003ctd\u003eMasterPiece T200\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSystem Environment\u003c\/td\u003e\n      \u003ctd\u003eDistributed Control System (DCS)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCommunication Service\u003c\/td\u003e\n      \u003ctd\u003eEthernet Router\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eSweden\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight\u003c\/td\u003e\n      \u003ctd\u003e0.9 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n      \u003ctd\u003e4.0 cm x 24.8 cm x 24.3 cm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eVerify that the part number DSCA180B 57520001-GZ matches your system requirements and replacement specifications.\u003c\/li\u003e\n  \u003cli\u003eDe-energize the MasterPiece T200 rack and associated power supplies before handling any hardware modules.\u003c\/li\u003e\n  \u003cli\u003eInspect the module and backplane connector pins for any signs of physical damage or debris.\u003c\/li\u003e\n  \u003cli\u003eSlide the communications module carefully into the designated slot within the MasterPiece T200 subrack, ensuring proper alignment with the backplane guides.\u003c\/li\u003e\n  \u003cli\u003eSecure any locking mechanisms or retention screws to guarantee a stable mechanical and electrical connection.\u003c\/li\u003e\n  \u003cli\u003ePower on the system and verify communication link status via the control system engineering station or diagnostic indicators.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668514763115,"sku":"DSCA180B 57520001-GZ","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-dsca180b-57520001-gz-communications-module-gppadbhd5gu_0431c69d-4299-4097-ad65-e51f8cd5b9ee.jpg?v=1765532638"},{"product_id":"abb-pu515a-3bse032401r1-system-800xa-communication-module","title":"ABB PU515A 3BSE032401R1 System 800xA Communication Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe ABB \u003cstrong\u003ePU515A\u003c\/strong\u003e (Product ID: \u003cstrong\u003e3BSE032401R1\u003c\/strong\u003e) is a hardware-integrated \u003cstrong\u003eReal-Time Accelerator (RTA) board\u003c\/strong\u003e designed to facilitate high-speed industrial network communication within the \u003cstrong\u003eSystem 800xA\u003c\/strong\u003e control environment. This professional PCI interface card functions as a dedicated processing interface that links standard PC-based control architectures with Master and MOD eDCN automation systems. Featuring an onboard CS503V1 dual-channel MB300 communication subsystem and an independent 25 MHz processor, the \u003cstrong\u003ePU515A 3BSE032401R1\u003c\/strong\u003e unloads deterministic time-critical communication tasks from the host operating system. It handles data translation, dual-channel protocol execution, and physical bus routing over standard 15-pin connection interfaces to prevent process control disruptions in complex Advant OCS network configurations.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in CS503V1 dual-channel MB300 communication module delivering high-throughput data transfer rates up to 10,000 kbit\/s.\u003c\/li\u003e\n\u003cli\u003eIndependent onboard 25 MHz processing core dedicated strictly to handling real-time network traffic acceleration.\u003c\/li\u003e\n\u003cli\u003eEquipped with 16 megabytes (MB) of local integrated RAM to optimize sequence buffers and network queues.\u003c\/li\u003e\n\u003cli\u003eDual 15-pin female D-sub connectors providing independent interfaces for redundant network physical media routing.\u003c\/li\u003e\n\u003cli\u003eHighly versatile physical bus interface supporting standard 32-bit or 64-bit PCI slots as well as legacy PCI-X slots.\u003c\/li\u003e\n\u003cli\u003eSolid-state component selection utilizing zero internal batteries to reduce long-term preventative maintenance demands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReal-time network interfaces connecting System 800xA server platforms to legacy Advant Master controllers.\u003c\/li\u003e\n\u003cli\u003eHigh-speed industrial data acquisition and supervisory tracking loops via MB300 networks.\u003c\/li\u003e\n\u003cli\u003eCommunication subsystem acceleration for server connectivity in MOD eDCN distribution environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eModel Designation\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eProduct ID\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eCatalog Description\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eExchange Part Number\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePU515A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e3BSE032401R1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePU515A Real-Time Accelerator, RTA, board.\u003c\/td\u003e\n\u003ctd\u003eEXC3BSE032401R1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePU515A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct ID\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3BSE032401R1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCommunication Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtocol Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMB300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCommunication Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10000 kbit\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Processors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCPU Clock Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMemory Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16 MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Batteries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardware Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V 32-bit 33MHz PCI, 64-bit PCI, or 100\/133MHz PCI-X slot (runs at 33MHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSweden (SE) \/ Poland (PL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCustoms Tariff Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85389091\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGross Volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 m³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eConnections\/Interfaces\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eInterface Port\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eFunction \/ Assignment\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel 1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15-pin female D-sub connector\u003c\/td\u003e\n\u003ctd\u003eMain MB300 bus connection channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15-pin female D-sub connector\u003c\/td\u003e\n\u003ctd\u003eRedundant or secondary MB300 bus connection channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrostatic Discharge (ESD) Protection:\u003c\/strong\u003e Handle the PCB assembly strictly at its physical edges and metal mounting brackets while using an approved ESD ground strap to avoid component damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlot Interface Selection:\u003c\/strong\u003e Insert the card directly into a matching 3.3V or 5V 32-bit\/64-bit standard PCI slot, or a compatible 100\/133MHz PCI-X slot. Note that the card interfaces at a 33MHz bus speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Mounting:\u003c\/strong\u003e Fasten the integrated faceplate retaining screw firmly onto the server or industrial PC chassis rail to secure appropriate ground pathing and prevent physical card shifting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Strain Relief:\u003c\/strong\u003e Secure the connected 15-pin female D-sub network cables to prevent unneeded physical torque from altering the connection seating at the backplane interfaces.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668514959723,"sku":"PU515A 3BSE032401R1","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-pu515a-3bse032401r1-real-time-accelerator-board-p0xz0slwd1p_cdc35145-404f-4c4a-8051-2f1183399373.jpg?v=1765532647"},{"product_id":"abb-sdcs-dsl-h10-dcslink-communication-options-board","title":"ABB SDCS-DSL-H10 DCSLink Communication Options Board","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe ABB SDCS-DSL-H10 is a specialized DCSLink communication options board designed for integration within ABB industrial drive systems, including the DCS880 series. This interface board establishes high-speed, reliable communication links between power units, multi-drive configurations, and external control hardware. It serves a vital role in coordinating complex motion applications, enabling synchronized multi-motor setups, 12-pulse operations, and external exciter control.\u003c\/p\u003e\n\u003cp\u003eEquipped with dual-channel DCSLink connections and support for fiber optic channels, the SDCS-DSL-H10 ensures noise immunity and extended transmission distances in electrically noisy industrial environments. The module features dedicated terminal connections for power supply and communication routing, alongside configurable bus termination to maintain signal integrity across the network architecture.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-channel DCSLink connectivity via X52 and X53 interface terminals\u003c\/li\u003e\n  \u003cli\u003eSupports up to 4 fiber optic channels for remote synchronization and high EMI immunity\u003c\/li\u003e\n  \u003cli\u003eConfigurable bus termination jumper (J1) for network optimization\u003c\/li\u003e\n  \u003cli\u003eCompatible with master-follower configurations, 12-pulse setups, and external exciters\u003c\/li\u003e\n  \u003cli\u003eOperates on a standard 24VDC external control voltage input via X51 connector\u003c\/li\u003e\n  \u003cli\u003eMaximum cable length of 100 meters at a communication speed of 500kBd\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-drive industrial automation systems\u003c\/li\u003e\n  \u003cli\u003eHigh-power DC drive configurations and 12-pulse retrofits\u003c\/li\u003e\n  \u003cli\u003eRolling mills, extruders, and heavy-duty conveyor drives\u003c\/li\u003e\n  \u003cli\u003eMaster-follower and parallel drive synchronization\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eABB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExact Model\u003c\/td\u003e\n      \u003ctd\u003eSDCS-DSL-H10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eDCSLink Communication Options Board\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n      \u003ctd\u003eABB DCS880 \/ Advant OCS \/ 800xA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower Supply\u003c\/td\u003e\n      \u003ctd\u003e24VDC (X51 connector)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCommunication Interfaces\u003c\/td\u003e\n      \u003ctd\u003eDCSLink (copper) and Fiber Optic channels\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMax Baud Rate \/ Distance\u003c\/td\u003e\n      \u003ctd\u003e500kBd at 100 meters\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBus Termination\u003c\/td\u003e\n      \u003ctd\u003eConfigurable via J1 jumper\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eSweden\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e10.4 cm x 6.1 cm x 3 cm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight\u003c\/td\u003e\n      \u003ctd\u003e0.05 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eVerify that the drive system and auxiliary power supplies are completely de-energized and locked out before handling internal option boards.\u003c\/li\u003e\n  \u003cli\u003eInspect the SDCS-DSL-H10 module and packaging for any signs of transit damage or electrostatic discharge vulnerability.\u003c\/li\u003e\n  \u003cli\u003eMount the communication board securely into the designated slot within the compatible ABB drive or control rack.\u003c\/li\u003e\n  \u003cli\u003eConnect the 24VDC supply to terminal X51 and attach the DCSLink copper or fiber optic cables to interfaces X52 and X53 according to system wiring diagrams.\u003c\/li\u003e\n  \u003cli\u003eConfigure the bus termination jumper (J1) correctly based on the node position in the network topology.\u003c\/li\u003e\n  \u003cli\u003ePower on the system and verify communication link status via drive diagnostics before commissioning.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668515090795,"sku":"SDCS-DSL-H10","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-sdcs-dsl-h10-dcslink-communication-options-board-symm2qaswwp_d727fee4-464b-45c0-aa43-2f884833e344.jpg?v=1765532652"},{"product_id":"abb-1tge120021r0010-pcd530-a102-communication-gateway","title":"ABB 1TGE120021R0010 PCD530 A102 Communication Gateway","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe ABB 1TGE120021R0010 (PCD530 A102) is a communication gateway and industrial control module engineered to provide data routing and protocol translation across heterogeneous automation networks. Operating on MLink Hardware Version 2 architecture, this unit functions as a central bridging node within distributed control systems, linking upper-layer TCP\/IP networks with lower-layer fieldbus instruments.\u003c\/p\u003e\n\u003cp\u003eThe gateway natively supports multi-protocol conversion environments, facilitating data exchange between Modbus TCP, Modbus RTU, Profibus, and PROFINET IO interfaces. This multi-protocol capability allows engineers to integrate legacy field devices into modern supervisory systems without requiring complete infrastructure replacement.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMLink Hardware Version 2 architecture designed for industrial automation control environments\u003c\/li\u003e\n  \u003cli\u003eMulti-protocol support including Modbus RTU, Modbus TCP, Profibus, and PROFINET IO\u003c\/li\u003e\n  \u003cli\u003eInternal Ethernet routing capabilities for high-speed communication with central control nodes\u003c\/li\u003e\n  \u003cli\u003eDual-side network compatibility streamlining data flow between process controllers and field instrumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProtocol conversion between Ethernet-based supervisory networks and fieldbus networks\u003c\/li\u003e\n  \u003cli\u003eIntegration of legacy Profibus instrumentation into modern Modbus TCP or PROFINET control systems\u003c\/li\u003e\n  \u003cli\u003eNetwork routing and data aggregation within ABB distributed control system architectures\u003c\/li\u003e\n  \u003cli\u003eFactory and process automation data concentration for monitoring and supervisory control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eABB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCatalog \/ Ordering Code\u003c\/td\u003e\n      \u003ctd\u003e1TGE120021R0010\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModel Designation\u003c\/td\u003e\n      \u003ctd\u003ePCD530 A102\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eCommunication Gateway\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHardware Version\u003c\/td\u003e\n      \u003ctd\u003eMLink Version 2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCommunication Services\u003c\/td\u003e\n      \u003ctd\u003eEthernet router, protocol converter\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSupported Protocols\u003c\/td\u003e\n      \u003ctd\u003eModbus RTU, Modbus TCP, Profibus, PROFINET IO\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eSweden\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668515221867,"sku":"1TGE120021R0010","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-1tge120021r0010-communication-gateway-ljxcs1rbh1e_6b17ce29-4919-4b49-a018-d8c6d6f00828.jpg?v=1765532657"},{"product_id":"abb-dscs116-57520001-bz-synchronous-communication-board","title":"ABB DSCS116 57520001-BZ Synchronous Communication Board","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eABB DSCS116 57520001-BZ\u003c\/strong\u003e is a specialized synchronous communication board designed for integration within ABB industrial automation and distributed control systems. This communication module serves as a critical hardware interface, engineered to manage deterministic data exchange and maintain precise synchronization between system nodes and controllers. It acts as an exchange unit supporting reliable network communication in complex industrial control environments.\u003c\/p\u003e\n\u003cp\u003eBuilt for demanding process applications, the DSCS116 module ensures high reliability and data integrity to prevent communication faults or latency in real-time control architectures. It is deployed primarily in legacy and active ABB control platforms where synchronized data transmission is essential for operational continuity and coordinated multi-device performance.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDedicated synchronous communication architecture for ABB control systems\u003c\/li\u003e\n  \u003cli\u003eFacilitates reliable, deterministic data exchange between system components\u003c\/li\u003e\n  \u003cli\u003eDesigned for seamless integration into standard control cabinet layouts\u003c\/li\u003e\n  \u003cli\u003eMaintains precise timing and synchronization for real-time process control\u003c\/li\u003e\n  \u003cli\u003eSupports lifecycle maintenance and service routines as an authorized exchange part\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDistributed Control Systems (DCS)\u003c\/li\u003e\n  \u003cli\u003ePower generation and distribution facilities\u003c\/li\u003e\n  \u003cli\u003eContinuous process manufacturing plants\u003c\/li\u003e\n  \u003cli\u003eHeavy industrial automation infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eABB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExact Model \/ Ordering Number\u003c\/td\u003e\n      \u003ctd\u003eDSCS116 57520001-BZ\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eSynchronous Communication Board\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n      \u003ctd\u003eABB Advant \/ DCS Platforms\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCommunication Function\u003c\/td\u003e\n      \u003ctd\u003eSynchronous data exchange and network routing\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eSweden\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight\u003c\/td\u003e\n      \u003ctd\u003e0.48 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e24 x 19 x 5.3 cm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eVerify the exact model number and part code against system documentation before installation.\u003c\/li\u003e\n  \u003cli\u003eDe-energize the control cabinet and associated rack before handling any internal hardware modules.\u003c\/li\u003e\n  \u003cli\u003eInspect the communication board and connector pins for any signs of transit damage or contamination.\u003c\/li\u003e\n  \u003cli\u003eSecurely mount the DSCS116 board into the designated slot within the control rack or chassis.\u003c\/li\u003e\n  \u003cli\u003eConnect all required network cables and verify terminal seating.\u003c\/li\u003e\n  \u003cli\u003eReapply system power and confirm proper communication status via controller diagnostics.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668520202603,"sku":"DSCS116 57520001-BZ","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-dscs116-57520001-bz-synchronous-communication-board-uocs2qhn1bx_5ea91e37-3246-4e3c-92de-fc8fd4a67058.jpg?v=1765532734"},{"product_id":"abb-07mk92-gjr5253300r3161-advant-controller-31-communications-processor","title":"ABB 07MK92 GJR5253300R3161 Advant Controller 31 Communications Processor","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe ABB 07MK92 (GJR5253300R3161) is a dedicated communications processor and Ethernet router designed for deployment within the ABB Advant Controller 31 (AC31) industrial automation and control architecture. This module serves as a critical networking interface, facilitating data exchange, remote programming, and system integration across distributed control nodes.\u003c\/p\u003e\n\u003cp\u003eEngineered for panel-mounted rack integration, the 07MK92 interfaces directly with the Advant Controller 31 system bus, managing network traffic and protocol handling to offload processing overhead from the central CPU. Its hardware architecture is built to withstand industrial electrical noise and operational temperature variations typical of factory floor and process control environments.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFunctions as a dedicated Ethernet router and communications processor within the Advant Controller 31 ecosystem\u003c\/li\u003e\n  \u003cli\u003eSupports network communication services for multi-node system configurations and supervisory data access\u003c\/li\u003e\n  \u003cli\u003eDirectly mounts onto standard AC31 rack architecture with dedicated backplane bus connectivity\u003c\/li\u003e\n  \u003cli\u003eDesigned for continuous operation in industrial panel enclosures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvant Controller 31 network expansion and remote diagnostic interfacing\u003c\/li\u003e\n  \u003cli\u003eIndustrial plant floor Ethernet routing and PLC data integration\u003c\/li\u003e\n  \u003cli\u003eLegacy DCS infrastructure maintenance and communication node replacement\u003c\/li\u003e\n  \u003cli\u003eDistributed control network supervision and programming access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eABB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Series\u003c\/td\u003e\n      \u003ctd\u003eAdvant Controller 31 (AC31)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCatalog \/ Ordering Code\u003c\/td\u003e\n      \u003ctd\u003e07MK92 \/ GJR5253300R3161\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModule Type\u003c\/td\u003e\n      \u003ctd\u003eCommunications Processor \/ Ethernet Router\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLifecycle Status\u003c\/td\u003e\n      \u003ctd\u003eDiscontinued\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eSweden\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight\u003c\/td\u003e\n      \u003ctd\u003e0.36 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e13.0 x 13.7 x 8.5 cm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668525576555,"sku":"07MK92 GJR5253300R3161","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-07mk92-gjr5253300r3161-communications-processor-25wci1jsyvn_132f8fae-4930-4a38-81ce-26087c724563.jpg?v=1765532782"},{"product_id":"abb-yt204001-hc-ypk-107e-legacy-dc-drives-communication-module","title":"ABB YT204001-HC YPK 107E Legacy DC Drives Communication Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp style=\"color: #2d3748;\"\u003eThe ABB YT204001-HC YPK 107E is a dedicated multi-processor communication interface board equipped with pre-loaded factory software, engineered for legacy ABB industrial DC drive systems. Operating as a critical data exchange bridge within the specialized YGMP and YHMP hardware architectures, this unit executes high-speed serial processing and bus management protocols to synchronize drive control metrics with supervisory automation layers. By maintaining exact signal timing and bus arbitration, the YPK 107E mitigates network latency and communication drops, serving as an essential component for sustaining older industrial powertrain installations.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 20px;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Firmware:\u003c\/strong\u003e Comes configured with factory MP-COMM system software pre-installed for immediate deployment.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlatform Specificity:\u003c\/strong\u003e Designed for native electrical and physical interface compatibility with YGMP and YHMP legacy DC drives.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLifecycle Support Path:\u003c\/strong\u003e Acts as the certified update pathway for the older, obsolete YT204001-FY product ID.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Bus Reliability:\u003c\/strong\u003e Engineered to stabilize processing pipelines between core drive hardware and peripheral control units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul style=\"list-style-type: square; color: #2d3748; padding-left: 20px;\"\u003e\n  \u003cli\u003eNetwork communication expansion in legacy ABB industrial DC drive cubicles.\u003c\/li\u003e\n  \u003cli\u003eReplacement of failed multi-processor link boards in heavy metal rolling mills and paper processing lines.\u003c\/li\u003e\n  \u003cli\u003eSustaining factory automation systems reliant on legacy YGMP and YHMP serial architectures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; width: 100%;\"\u003e\n  \u003ctable style=\"width: 100%; border-collapse: collapse; color: #2d3748;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"border-bottom: 2px solid #1a365d; text-align: left;\"\u003e\n        \u003cth style=\"padding: 8px; font-weight: bold;\"\u003eParameter\u003c\/th\u003e\n        \u003cth style=\"padding: 8px; font-weight: bold;\"\u003eValue\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eManufacturer\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eABB\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eABB Type Designation\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eYPK 107E\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eProduct ID\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eYT204001-HC\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eReplaced Product ID (Old)\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eYT204001-FY\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eReplacement Product ID (New)\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e3ASD489301A410\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eSystem Compatibility\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eLegacy DC Drives (YGMP \/ YHMP)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eSoftware Configuration\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eMP-COMM Software Included\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eCondition\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eOriginal New\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eCountry of Origin\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003eSweden (SE)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eCustoms Tariff Number\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e85389091\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eProduct Net Weight\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e0.001 kg\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003eShipping Weight (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e0.250 kg\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"border-bottom: 1px solid #e2e8f0;\"\u003e\n        \u003ctd style=\"padding: 8px; font-weight: bold;\"\u003ePackage Dimensions (Calculated)\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px;\"\u003e180 x 130 x 40 mm\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cdiv style=\"background-color: #fff5f5; border-left: 4px solid #c53030; padding: 12px; margin-bottom: 15px;\"\u003e\n  \u003cstrong style=\"color: #9b2c2c;\"\u003eCRITICAL WARNING:\u003c\/strong\u003e\n  \u003cp style=\"color: #9b2c2c; margin: 4px 0 0 0;\"\u003eIsolate all primary and control power sources supplying the DC drive housing before removing covers or handling internal electronics. Communications links may carry induced voltages from surrounding power components. Confirm a total zero-energy state across all terminals prior to intervention to prevent component frying or personal injury.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"margin-bottom: 10px;\"\u003e\n  \u003cdiv style=\"display: inline-block; background-color: #2b6cb0; color: #ffffff; width: 24px; height: 24px; border-radius: 50%; text-align: center; font-weight: bold; margin-right: 8px;\"\u003e1\u003c\/div\u003e\n  \u003cdiv style=\"display: inline-block; color: #2d3748;\"\u003eDon an approved ESD grounding wrist strap and verify its connection to the system panel frame before handling the communication board.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"margin-bottom: 10px;\"\u003e\n  \u003cdiv style=\"display: inline-block; background-color: #2b6cb0; color: #ffffff; width: 24px; height: 24px; border-radius: 50%; text-align: center; font-weight: bold; margin-right: 8px;\"\u003e2\u003c\/div\u003e\n  \u003cdiv style=\"display: inline-block; color: #2d3748;\"\u003eCarefully unseat the existing interface module by unlocking any plastic retention standoffs or side brackets, then pull the board straight out from the bus connector.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"margin-bottom: 10px;\"\u003e\n  \u003cdiv style=\"display: inline-block; background-color: #2b6cb0; color: #ffffff; width: 24px; height: 24px; border-radius: 50%; text-align: center; font-weight: bold; margin-right: 8px;\"\u003e3\u003c\/div\u003e\n  \u003cdiv style=\"display: inline-block; color: #2d3748;\"\u003eAlign the replacement module pins precisely with the targeted backplane slot. Apply uniform, gentle pressure on both edges until the board snaps into the mounting tracks.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"margin-bottom: 10px;\"\u003e\n  \u003cdiv style=\"display: inline-block; background-color: #2b6cb0; color: #ffffff; width: 24px; height: 24px; border-radius: 50%; text-align: center; font-weight: bold; margin-right: 8px;\"\u003e4\u003c\/div\u003e\n  \u003cdiv style=\"display: inline-block; color: #2d3748;\"\u003eSecure all serial, ribbon, or specialized connection cables. Execute standard diagnostic power-up sequences to verify initialization of the onboard MP-COMM software.\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668526526827,"sku":"YT204001-FY","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-ypk107e-yt204001-fy-circuit-board-zpt3adsnobn_0bd11a7d-b704-4144-92ca-6235dfef9c81.jpg?v=1765532819"},{"product_id":"abb-rdco-03-64606964-ddcscomm-optkit-communication-option-module","title":"ABB RDCO-03 64606964 DDCSCOMM OPTKIT Communication Option Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eRDCO-03\u003c\/strong\u003e is an industrial communication option kit designed to establish and manage high-speed fiber optic data transmission lines within variable speed drive control hardware. Identified by product ID \u003cstrong\u003e64606964\u003c\/strong\u003e, this module functions as a \u003cstrong\u003eDDCS communication\u003c\/strong\u003e interface adapter, allowing processing units to transmit deterministic control commands and diagnostics over specialized network configurations. The \u003cstrong\u003eRDCO-03\u003c\/strong\u003e features hardware channels supporting four 5M-baud fiber optic receiver\/transmitter links, which are treated with a specialized protective coating to ensure robust operation in contaminated or humid processing atmospheres. This communication framework ensures accurate real-time fieldbus networking and drive-to-drive synchronization in heavy industrial automation plants.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCoated electronic board surface to protect internal circuitry against humidity and particulate contamination\u003c\/li\u003e\n\u003cli\u003eNative interface support for multiple high-speed DDCS fiber optic communication channels\u003c\/li\u003e\n\u003cli\u003eFactory-configured assembly engineered for direct slot integration into compatible drive control mainframes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-speed drive-to-drive communication and master-follower link configurations\u003c\/li\u003e\n\u003cli\u003eIntegration of variable speed drive systems with centralized process control systems over DDCS networks\u003c\/li\u003e\n\u003cli\u003eFiber optic fieldbus communication interface expansion in heavy industrial facilities\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRDCO-03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct ID\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e64606964\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eABB Type Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRDCO-03C OPTION\/SP KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCatalog Description\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDDCS COMMUN. OPTI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5M, 5M, 5M, 5M (COATED)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.011 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFinland (FI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCustoms Tariff Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85049099\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaced Product IDs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e64379275, 64606930\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.000 piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD Precautionary Handling:\u003c\/strong\u003e Ensure proper anti-static grounding measures are active prior to handling or unpacking the board assembly to mitigate electro-static trace damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Optic Connection:\u003c\/strong\u003e Connect the 5M fiber optic transmitter and receiver cables carefully into their assigned channels, verifying clean connector faces to prevent signal attenuation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Securing:\u003c\/strong\u003e Mount the module into the designated slot on the drive control board interface, tightening any internal hardware to guarantee persistent physical connection and grounding path stability.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668526952811,"sku":"RDCO-03C","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-rdco-03c-ddcs-communications-module-w2ndc44o0ou_469e83e2-cb8d-429c-b89b-43bca83e7119.jpg?v=1765532834"},{"product_id":"abb-pu410k01-3bse051826r1-masterbus-300-interface-communication-kit","title":"ABB PU410K01 3BSE051826R1 MasterBus 300 Interface Communication Kit","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003ePU410K01\u003c\/strong\u003e is a complete hardware communication kit configured to bridge process control networks with standard computing platforms. Tracked under product ID \u003cstrong\u003e3BSE051826R1\u003c\/strong\u003e, this specialized sub-assembly provides the vital physical and electrical interfaces required to deploy a \u003cstrong\u003eMasterBus 300 Interface\u003c\/strong\u003e link for Advant Common Hardware architectures. The kit contains a central external RTA communication hardware unit alongside a regional selection of power cables and shielded twisted-pair lines. Engineered specifically for operation within control frameworks such as Control Builder A and 800xA for Advant Master setups, the \u003cstrong\u003ePU410K01\u003c\/strong\u003e facilitates either single or dual structural connections directly to a workstation PC. This combination enables deterministic transmission of diagnostics, automated logs, and system commands across demanding industrial processing networks.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete installation package including an external RTA communication unit, standard accessory kit, and a shielded twisted-pair connection line \u003c\/li\u003e\n\u003cli\u003eMulti-region power infrastructure compliance containing separate functional power cables specified for US, UK, and European mains networks \u003c\/li\u003e\n\u003cli\u003eDual host flexibility supporting isolated single or dual hardware connection architecture to the target control room PC \u003c\/li\u003e\n\u003cli\u003eNative system compatibility designed to seamlessly dock within industrial Advant Common-Communication module racks \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-fidelity communication interfacing for MasterBus 300, eDCN, and Control Builder A (CBA) industrial network infrastructures \u003c\/li\u003e\n\u003cli\u003eProcess control automation monitoring using 800xA systems for Advant Master architectures \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eIdentifier\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eQty\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eUnit Of Measure\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSTU3BSE077311R1\u003c\/td\u003e\n\u003ctd\u003eStepUp of PU51x to PU410K01 \u003c\/td\u003e\n\u003ctd\u003e1 \u003c\/td\u003e\n\u003ctd\u003epiece \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eABB \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePU410K01 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct ID\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3BSE051826R1 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCatalog Description\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePU410K01 RTA Communication Kit for MB300 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCommunication_Module \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eKit Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1pc PU410 3BSE056478R1 External RTA Communication Unit \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e1pc Installation instruction 3BSE081242R1 \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e1pc Power cable; US (2.5m) 3BUC950012R1 \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e1pc Power cable; UK (2.0m) 3BSC950349R1 \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e1pc Power cable; European (3.5m) 5385430-2 \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e1pc TK852V010 3BSC950342R1 shielded twisted pair \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e1pc 3BSE056488R1 Accessory Kit \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCustoms Tariff Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85389091 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Depth \/ Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e425 mm \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e90 mm \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e252 mm \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.325 kg \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWEEE Category\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5. Small Equipment (No External Dimension More Than 50 cm) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Batteries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Selection:\u003c\/strong\u003e Select the correct region-specific mains power cable from the assembly box matching local socket geometry (US power cable at 2.5m, UK power cable at 2.0m, or European power cable at 3.5m).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Mitigation:\u003c\/strong\u003e Deploy the provided TK852V010 shielded twisted-pair communication line during installation to protect signal pathways from electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Topology:\u003c\/strong\u003e Follow the provided installation manual to map out single or dual lines linking the external communication unit directly to the control PC interface.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668551397739,"sku":"PU410K01 3BSE051826R1","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-pu410k01-3bse051826r1-rta-communication-kit-4y3s1e4nbnv_7fc58673-2855-410c-874a-d52eab4a50bc.jpg?v=1765532941"},{"product_id":"abb-ci810b-3bse020520r1-fieldbus-communication-interface","title":"ABB CI810B 3BSE020520R1 Fieldbus Communication Interface","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe ABB CI810B (3BSE020520R1) is a dedicated Fieldbus Communication Interface designed for seamless integration within the ABB System 800xA distributed control system environment. This hardware module acts as a vital communication gateway connecting higher-level control architecture to field-level instrumentation, drives, and decentralized I\/O networks. By bridging the control network with industrial fieldbuses, the unit ensures deterministic data exchange and supports the platform's advanced asset management, device configuration, and diagnostic capabilities.\u003c\/p\u003e\n\u003cp\u003eEngineered for high-availability process control applications, the CI810B supports redundant configurations to prevent single points of failure in mission-critical industrial environments. The module facilitates real-time monitoring and parameterization of field devices, integrating smoothly into the object-oriented architecture of System 800xA. Its robust physical design ensures reliable operation inside industrial control cabinets subjected to standard electrical and thermal operating conditions.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for ABB System 800xA distributed control system architectures\u003c\/li\u003e\n  \u003cli\u003eProvides high-speed data communication between central controllers and field instrumentation\u003c\/li\u003e\n  \u003cli\u003eSupports redundant system configurations for high-availability requirements\u003c\/li\u003e\n  \u003cli\u003eEnables comprehensive device management, diagnostics, and parameter configuration\u003c\/li\u003e\n  \u003cli\u003eStandard DIN-rail mountable form factor for organized control cabinet installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous process manufacturing and chemical plants\u003c\/li\u003e\n  \u003cli\u003eOil and gas production and transmission facilities\u003c\/li\u003e\n  \u003cli\u003ePower generation and distribution control systems\u003c\/li\u003e\n  \u003cli\u003eWater and wastewater treatment automation\u003c\/li\u003e\n  \u003cli\u003ePharmaceutical manufacturing and batch processing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eABB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eFieldbus Communication Interface\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCatalog \/ Ordering Number\u003c\/td\u003e\n      \u003ctd\u003eCI810B\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePart Number\u003c\/td\u003e\n      \u003ctd\u003e3BSE020520R1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n      \u003ctd\u003eABB System 800xA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Type\u003c\/td\u003e\n      \u003ctd\u003eDIN Rail\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eSweden\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight\u003c\/td\u003e\n      \u003ctd\u003e0.36 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n      \u003ctd\u003e170 mm x 85 mm x 120 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eVerify that the part number 3BSE020520R1 matches your system engineering documentation before installation.\u003c\/li\u003e\n  \u003cli\u003eDe-energize the control cabinet and relevant backplane power supplies prior to handling hardware modules.\u003c\/li\u003e\n  \u003cli\u003eInspect the module and backplane connectors for any signs of physical damage or debris.\u003c\/li\u003e\n  \u003cli\u003eSecurely mount the CI810B onto the designated DIN rail within the system enclosure.\u003c\/li\u003e\n  \u003cli\u003eConnect fieldbus cables and verify secure terminal connections according to system wiring diagrams.\u003c\/li\u003e\n  \u003cli\u003eRestore power and configure the node address and communication parameters via the System 800xA engineering tools.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668583838059,"sku":"CI810B 3BSE020520R1","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-ci810b-3bse020520r1-fieldbus-communication-interface-ajle21cvlks_fbee0275-b4e1-4f38-849c-aed55e06d61f.jpg?v=1765532977"},{"product_id":"abb-nmpp02-bailey-network-90-module-power-panel","title":"ABB NMPP02 Bailey Network 90 Module Power Panel","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNMPP02 (NMPP02)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a heavy-duty Module Power Panel engineered for the ABB Bailey Network 90 and Harmony Rack control architectures. Operating as a critical power infrastructure component within demanding processing sectors like baseload power plants, petrochemical refineries, and continuous-pulp paper mills, this power panel manages and distributes primary power rails directly to downstream module mounting units (MMU). The\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNMPP02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eaggregates bulk DC voltages, integrates precision overcurrent circuit protection, and routes clean, uninterrupted power across the system backplane bus. Incorporating this physical power distribution panel into your control cabinet matrix mitigates the risk of localized power sags, protects processing cards from cascading short-circuit faults, and eliminates unexpected process upsets to ensure maximum system availability and reduced plant MTBF.\u003c\/p\u003e\n\u003ch3\u003eInfrastructure Design and Power Distribution Architecture\u003c\/h3\u003e\n\u003cp\u003eThe physical layout and electrical framework of the NMPP02 panel prioritize absolute power isolation, line protection, and simplified serviceability under live cabinet environments.\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Current Bus Isolation:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFeatures isolated solid copper bus segments capable of routing primary DC rails (+5 VDC, +15 VDC, -15 VDC, and auxiliary 24 VDC systems) with minimal resistive voltage drops across the entire termination area.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent Circuit Protection:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEquipped with dedicated, front-accessible circuit breakers or high-rupture fuses mapped to individual rack slots or chassis groups. If a downstream module suffers a catastrophic electrical short, the localized breaker trips instantly, preventing system-wide voltage collapse.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFail-Safe Monitoring Interface:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIncludes auxiliary status contacts and terminal points designed to wire directly into system alarm networks. This layout provides the central Multi-Function Processor with instantaneous warning of a tripped power branch or breaker failure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRugged Passive Thermal Frame:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe heavy steel backplate chassis acts as a natural heat sink, dissipating thermal energy generated at the connection junctions without requiring active, failure-prone motorized fan kits.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eComprehensive Hardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003ePerformance Property\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eEngineering Metric and Specification Values\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel Number\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNMPP02\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand Identity\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eABB Bailey\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSystem Compatibility\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNetwork 90 \/ Harmony Rack Systems\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eComponent Classification\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eModule Power Panel (Power Distribution Board)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eInput Voltage Channels\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMultiple DC Rails (+5 VDC, +15 VDC, -15 VDC, 24 VDC Nominal)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eMaximum Current Rating\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBuilt to match full-load Network 90 MMU chassis limits\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCircuit Breaker Ratings\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eIndividual branch-rated thermal-magnetic toggle switches\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eMounting Footprint\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eStandard cabinet rear-rack or utility panel installation\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePhysical Enclosure Protection\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOpen-frame structural design with protective terminal covers\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eAmbient Operating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0 to 70 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eStorage Temperature Limits\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-40 to 85 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eRelative Humidity Range\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e5 to 95% relative humidity (Non-condensing)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering Field FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the primary role of the NMPP02 within a legacy Network 90 cabinet upgrade?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NMPP02 acts as the structural power interface between bulk cabinet power supplies (such as the NKPS series) and the individual module mounting racks. During cabinet upgrades to modern Harmony processors, the NMPP02 remains a critical component because it maintains the core power infrastructure and distribution buses required by legacy terminal blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do engineers identify a tripped branch circuit on the NMPP02 panel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach distinct power distribution loop is governed by a physical, front-facing toggle circuit breaker or an indicator fuse block. A tripped state mechanically forces the breaker switch to the OFF\/TRIP position or activates a high-visibility mechanical flag, allowing technicians to pinpoint the faulted rack layer instantly without applying diagnostic meters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the NMPP02 panel handle dual-redundant power feed configurations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The panel layout features isolated input terminals that allow field engineers to route separate, independent primary and secondary bulk power lines into the bus network. This ensures that if a main power supply bank fails, the parallel feed keeps the processor backplane active without a transfer blip.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eOn-Site Installation and Commissioning Manual\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Grounding and Earthing Matrix:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMount the panel securely to the cabinet structural columns using zinc-plated hardware to pierce any non-conductive paint layers. Connect a heavy-gauge copper ground cable (minimum 6.0 square mm cross-section) from the dedicated copper ground stud directly to the main cabinet system earth bus bar. A low-impedance ground path is vital to drain electromagnetic transients safely.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWiring Torque Specs and Terminal Security:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStrip all primary power input and output lines to OEM specifications and crimp using heavy-duty, insulated ring lugs. Tighten all screw terminal blocks and power bus fasteners to a strict torque setting of 1.2 Nm (10.6 in-lbs). Loose connections under high current loads will cause localized overheating, resulting in progressive terminal damage or voltage drop anomalies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLive Maintenance Safety Clearances:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe NMPP02 handles high current capacities directly from the main power supplies. Always utilize non-conductive terminal barrier shrouds over the live bus bars. When tracing power branches or resetting tripped toggles while the cabinet is energized, engineers must utilize insulated tools and follow local arc-flash safety procedures.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDust Mitigation and Periodic Inspections:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBecause this unit features an open mechanical build for passive convection cooling, conductive dust and ambient chemical residues can settle on top of open terminal strips over long operating periods. Blow out the panel assembly every 12 months using clean, dry low-pressure compressed air, and visually inspect for signs of thermal discoloration on wire insulation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668612051307,"sku":"NMPP02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-nmpp02-power-panel-gtzaye43s35_2fdc5b0b-5924-47cd-b13a-f127a9882a9b.jpg?v=1765535526"},{"product_id":"abb-cma126-ac500-plc-communication-module","title":"ABB CMA126 AC500 PLC Communication Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe ABB CMA126 is a specialized communication module designed for integration within the ABB AC500 modular PLC platform. Operating as an Ethernet router and interface card, this unit facilitates robust data transfer and network communication across industrial automation architectures. It acts as a reliable node for connecting control devices, ensuring synchronized data exchange and system transparency within distributed control systems.\u003c\/p\u003e\n\u003cp\u003eEngineered for standard industrial control panels, the CMA126 supports efficient network routing capabilities without requiring complex configuration. Its hardware architecture is optimized for reliable performance in continuous industrial environments, maintaining data integrity and network availability for connected AC500 central processing units and remote I\/O nodes.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for the ABB AC500 PLC product range\u003c\/li\u003e\n  \u003cli\u003eFunctions as an Ethernet router for industrial network expansion\u003c\/li\u003e\n  \u003cli\u003eEnables seamless data routing between control system layers\u003c\/li\u003e\n  \u003cli\u003eStandardized form factor for DIN rail or direct base mounting\u003c\/li\u003e\n  \u003cli\u003eDirect integration with AC500 backplane communication buses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial manufacturing automation and discrete control\u003c\/li\u003e\n  \u003cli\u003eProcess control and distributed DCS network interfacing\u003c\/li\u003e\n  \u003cli\u003eMachine building and OEM equipment networking\u003c\/li\u003e\n  \u003cli\u003eWater and wastewater treatment plant control systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eABB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Range\u003c\/td\u003e\n      \u003ctd\u003eAC500\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModel \/ Part Number\u003c\/td\u003e\n      \u003ctd\u003eCMA126\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModule Type\u003c\/td\u003e\n      \u003ctd\u003eCommunication Module \/ Ethernet Router\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n      \u003ctd\u003eABB AC500 PLC Platform\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCommunication Service\u003c\/td\u003e\n      \u003ctd\u003eEthernet Routing\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eSweden\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight\u003c\/td\u003e\n      \u003ctd\u003e0.12 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e10 cm x 17.7 cm x 1.5 cm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eVerify the part number and inspect the module for any shipping damage before installation.\u003c\/li\u003e\n  \u003cli\u003eDe-energize the AC500 PLC rack and associated power supply sources prior to handling hardware.\u003c\/li\u003e\n  \u003cli\u003eMount the CMA126 securely onto the designated slot of the AC500 terminal base or DIN rail mounting setup.\u003c\/li\u003e\n  \u003cli\u003eConnect the appropriate Ethernet cables to the module communication ports ensuring secure latching.\u003c\/li\u003e\n  \u003cli\u003eRestore system power and configure network parameters using the appropriate ABB engineering software tool.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668613198187,"sku":"CMA126","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-cma126-plc-controller-module-uvekivrusfv_795ff45b-1833-4c07-9a9d-2d78a1394992.jpg?v=1765535568"},{"product_id":"abb-bailey-infi-90-iimcl01-multibus-communication-link","title":"ABB Bailey Infi 90 IIMCL01 Multibus Communication Link","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIIMCL01\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a high-reliability Multibus Communication Link termination module engineered by ABB Bailey for the legacy\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eInfi 90\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand Network 90 distributed control system (DCS) architectures. Serving as the primary physical termination interface for high-capacity industrial workstations, this module works alongside the IIMLM01 multi-bus loop module to establish a seamless, high-speed data bridge between multi-bus communication processors (such as the IIMCP01 or IIMCP02) and the broader INFI-NET or Plant Loop communication highway. Heavy continuous-process facilities—including automated thermal power generation stations, pulp and paper processing plants, and oil refining complexes—rely on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIIMCL01\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto sustain deterministic data highways for Operator Interface Stations (OIS). By providing dedicated mechanical termination and precise line impedance matching for redundant communication channels, this interface card stabilizes data throughput, eliminates signal reflection faults, and cuts down on unprogrammed plant downtime.\u003c\/p\u003e\n\u003ch3\u003eCommunication Architecture \u0026amp; Node Integration\u003c\/h3\u003e\n\u003cp\u003eThe underlying circuit topography, hardware compatibility pathways, and network routing logic of the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIIMCL01\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003etermination link maintain strict data determinism within the DCS framework.\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWorkstation Highway Interfacing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProvides direct network termination paths specifically optimized for all legacy OIS setups, allowing supervisory engineering consoles to read real-time process graphics.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProcessor-to-Network Bridging:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConnects directly with the IIMLM01 multi-bus loop card to route processed logic commands from the local IIMCP01 or IIMCP02 communication processors out to the main plant network.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSignal Reflection Mitigation:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOutfitted with specialized onboard termination resistors that match the characteristic impedance of the INFI-NET and Plant Loop twinaxial or coaxial cable runs.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanic Noise Isolation:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFeatures advanced electrical isolation logic to shield delicate multi-bus processor components from high-voltage surge transients or inductive ground noise present on long external cable runs.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCertified Specification Standard\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel Identity\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eIIMCL01\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand Manufacturer\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eABB Bailey Controls\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eControl System Line\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eInfi 90 \/ Network 90 DCS Suite\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eFactory Part Number\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e6638438A1\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModule Classification\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMultibus Communication Link Termination Board\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCompatible Processors\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eIIMCP01 \/ IIMCP02 Multi-Bus Communication Processors\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCompanion Loop Card\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eIIMLM01 Multi-Bus Loop Module\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eNetwork Highway Types\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eINFI-NET \/ Plant Loop Communication Highways\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTarget Application\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAll OIS (Operator Interface Station) Architecture\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePCB Environmental Guard\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eIndustrial Grade Protective Conformal Coating\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0 to +70 deg C Continuous Environmental Range\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eStorage Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-40 to +85 deg C Safe Storage Constraints\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eManufacturing Location\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnited States (USA)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNetwork Communication \u0026amp; Troubleshooting FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow do engineers isolate a communication dropout between the IIMCP02 processor and the IIMCL01 link?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTechnicians should first verify the status indicators on the companion IIMLM01 loop module and check the physical ribbon cables connecting the processor to the IIMCL01 termination module. If the multi-bus processor cannot detect the termination link, it will flag a bus error code. Inspecting the terminal connections for loose wire strands or measuring the line resistance often reveals bad signal paths or improper grounding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the IIMCL01 termination module be used on both twinaxial and coaxial versions of the INFI-NET highway?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The board acts as the structural termination block for the communication highway inside the rack. However, the external terminal assembly and dip-switch options must be set correctly to match either the coaxial or twinaxial network line configuration, ensuring proper line impedance and signal levels across the loop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the consequences of removing an active IIMCL01 termination module from a running network?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRemoving an active termination board breaks the continuity of the INFI-NET or Plant Loop highway, causing immediate signal reflection and open-circuit errors across the network. This disruption can cause adjacent Operator Interface Stations to lose their data links, interrupting the live tracking of industrial processes.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Engineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTwinaxial Cable Landing and Ground Shield Separation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen landing the INFI-NET or Plant Loop communication cables onto the IIMCL01 block, separate and ground the outer wire shields strictly according to the system layout instructions. Connect the shield to the designated panel earth ground at a single terminal point only. Leaving cable shields ungrounded or establishing multiple ground points creates ground loops that inject high-frequency noise into the data lines, corrupting process packets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRibbon Cable Strain Relief and Connector Retention:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEnsure the high-density ribbon cables routing from the internal IIMLM01 loop module are seated completely into the header pins of the IIMCL01. Snap the plastic side retention levers inward to lock the connectors in place. Route the cable bundles carefully inside the wireways to avoid sharp right-angle bends, protecting the copper conductors from micro-fractures under long-term cabinet vibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCabinet Thermal Clearance and Environmental Housekeeping:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IIMCL01 operates reliably over a standard continuous temperature window of 0 to +70 deg C. To ensure adequate cooling, avoid overcrowding the termination area with heavy field wiring that could block the natural convection currents inside the rack. Periodically clean away dust or non-conductive dirt to prevent heat retention and preserve the module's long-term performance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668614377835,"sku":"IIMCL01","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-iimcl01-multibus-communication-link-termination-bgw5nzbabxr_d23a7796-9a44-4cca-8efd-424ef682b5a8.jpg?v=1765535613"},{"product_id":"abb-sdcs-com-81-3adt220134r0001-fast-optical-ddcs-communication-module","title":"ABB SDCS-COM-81 3ADT220134R0001 Fast Optical DDCS Communication Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSDCS-COM-81\u003c\/strong\u003e (Product ID \u003cstrong\u003e3ADT220134R0001\u003c\/strong\u003e) functions as a high-speed fiber optic data transmission interface designed to facilitate fieldbus communication networks within industrial drive controllers. This \u003cstrong\u003eFast Optical DDCS Communication Module\u003c\/strong\u003e operates at a transmission rate of 10 MBd, providing synchronous data exchange channels between control processors such as the AC800M and drive processing platforms. By managing distributed drive communication system (DDCS) protocol formatting over optical fibers, the circuit assembly eliminates electrical noise vulnerabilities and ensures galvanic isolation across complex automation topologies. The assembly integrates directly into specialized slot channels of host converters, allowing real-time parameter configuration, torque command distribution, and distributed diagnostics management within demanding high-capacity multi-drive arrays.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Speed Optical Link:\u003c\/strong\u003e Supports reliable 10 MBd data transmission utilizing the distributed drive communication system protocol layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanic Noise Isolation:\u003c\/strong\u003e Implements fiber optic link coupling to eliminate electromagnetic interference across long-distance communications paths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Controller Integration:\u003c\/strong\u003e Engineered for high-speed interoperability with external application processors including the AC800M controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Origin Production:\u003c\/strong\u003e Manufactured under precise quality standards with production origins traceably verified in Thailand and the United States.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-Speed Distributed Control Interfacing in ACS 6000 Medium Voltage Drive Networks \u003c\/li\u003e\n\u003cli\u003eFiber Optic DDCS Automation Communication Linking with AC800M Master Controllers \u003c\/li\u003e\n\u003cli\u003eReal-Time Parameter Mapping and Supervisory Networking within DCS800-S Power Modules \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003ePart Number \/ Identifier\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3ADT220134R0001\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSDCS-COM-81 board 10MBd; Fast optical DDCS Communication Module 10Mbd \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ch4\u003eMechanical\u003c\/h4\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eABB \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThailand (TH) \/ United States (US) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50 mm \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e225 mm \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e150 mm \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5 kg \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCustoms Tariff Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85371098 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch4\u003ePerformance\u003c\/h4\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCommunication Protocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDDCS Communication Protocol \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eData Transmission Velocity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 MBd \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded Hardware Component\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1x Board 3ADT314900R1002 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eConnections\/Interfaces\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eConnection Interface\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOptical Port Interfaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 MBd Fiber optic transmitter and receiver links for DDCS protocol bus streams \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrostatic Control Implementation:\u003c\/strong\u003e Employ a grounded workplace surface mat and wear an approved grounding wrist strap before handling the circuit card to prevent electrostatic breakdown of the optical transceivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical Cable Bend Optimization:\u003c\/strong\u003e Ensure fiber optic transmission cables adhere to the minimum allowable bending radius designated by the installation manual to prevent internal signal attenuation or line loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Cleaning Protocol:\u003c\/strong\u003e Inspect and clean the optical receiver and transmitter connection ports prior to insertion to prevent dust contamination from degrading the 10 MBd transmission integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware Configuration:\u003c\/strong\u003e Align the communication speed configuration settings within the drive control software to match the 10 MBd physical throughput of the fiber optic module interface.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668614410603,"sku":"SDCS-COM-81","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-sdcs-com-81-3adt314900r1002-drives-communication-board-updkzmyhylk_e404b4c1-4951-474e-93bb-d9bfe309bde1.jpg?v=1765535614"},{"product_id":"abb-3bhe028959r0101-ppc902ce101-fibre-optic-communication-board","title":"ABB 3BHE028959R0101 PPC902CE101 Fibre Optic Communication Board","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe ABB 3BHE028959R0101 PPC902CE101 is a specialized fibre optic communication board designed for high-performance industrial automation and control applications. As an integral component within the ABB UNITROL excitation systems portfolio, this module provides high-speed, noise-immune optical communication pathways between system controllers and power conversion hardware. It ensures deterministic data exchange and robust signal integrity in electrically harsh environments typical of large-scale power generation and heavy industrial processes.\u003c\/p\u003e\n\u003cp\u003eEngineered to meet demanding operational requirements, the PPC902CE101 board facilitates reliable data transmission, reducing latency and susceptibility to electromagnetic interference. It integrates directly into the system architecture to support real-time monitoring, synchronization, and control functions, making it a critical asset for maintaining stability and uptime in critical infrastructure.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed fibre optic communication channels for noise-immune data transfer\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for integration within ABB UNITROL excitation and control systems\u003c\/li\u003e\n  \u003cli\u003eRobust circuit layout engineered to withstand high electromagnetic interference environments\u003c\/li\u003e\n  \u003cli\u003eReliable optical transceiver interfaces for long-distance controller-to-drive linkage\u003c\/li\u003e\n  \u003cli\u003ePrecision surface-mount construction ensuring consistent operational performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSynchronous generator excitation control systems\u003c\/li\u003e\n  \u003cli\u003eLarge-scale power generation and turbine management\u003c\/li\u003e\n  \u003cli\u003eHeavy industrial power distribution networks\u003c\/li\u003e\n  \u003cli\u003eHigh-voltage direct current (HVDC) converter stations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eABB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct ID \/ Ordering Code\u003c\/td\u003e\n      \u003ctd\u003e3BHE028959R0101\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBoard Type Designation\u003c\/td\u003e\n      \u003ctd\u003ePPC902CE101\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Family\u003c\/td\u003e\n      \u003ctd\u003eUNITROL Excitation Systems\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCommunication Type\u003c\/td\u003e\n      \u003ctd\u003eFibre Optic\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Type\u003c\/td\u003e\n      \u003ctd\u003eRack \/ Enclosure Slot Mount\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eSweden\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight\u003c\/td\u003e\n      \u003ctd\u003e0.24 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e250 mm x 105 mm x 30 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConnections \/ Interfaces\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eInterface\u003c\/th\u003e\n      \u003cth\u003eFunction\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOptical Transceiver Ports\u003c\/td\u003e\n      \u003ctd\u003eHigh-speed fibre optic data transmission and reception\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInternal Bus Connectors\u003c\/td\u003e\n      \u003ctd\u003eBackplane communication and power supply distribution\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eVerify that the part number 3BHE028959R0101 matches your system replacement requirements.\u003c\/li\u003e\n  \u003cli\u003eEnsure all power sources to the rack or excitation cubicle are completely de-energized and locked out before servicing.\u003c\/li\u003e\n  \u003cli\u003eInspect the board and optical connectors for any signs of transit damage or particulate contamination.\u003c\/li\u003e\n  \u003cli\u003eHandle the module using proper electrostatic discharge (ESD) wrist straps and grounding protocols.\u003c\/li\u003e\n  \u003cli\u003eCarefully slide the board into the designated rack slot, ensuring proper backplane alignment before securing fastening mechanisms.\u003c\/li\u003e\n  \u003cli\u003eConnect the fibre optic cables, ensuring bend radii remain within manufacturer-specified limits to prevent optical attenuation.\u003c\/li\u003e\n  \u003cli\u003eRestore power and verify communication link status via system diagnostic indicators prior to commissioning.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668614705515,"sku":"3BHE028959R0101 PPC902CE101","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-3bhe028959r0101-ppc902ce101-fibre-optic-communication-board-dhl-fedex-zwjg2kwlu3k_f4bee6da-8f33-4bdc-b1f6-53068362566d.jpg?v=1765535624"},{"product_id":"abb-spnpm22-symphony-plus-network-processing-module","title":"ABB SPNPM22 Symphony Plus Network Processing Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSPNPM22\u003c\/strong\u003e is a high-performance hardware communication interface module engineered to manage and execute high-speed data routing within distributed control topologies. This \u003cstrong\u003eSPNPM22 network processing module\u003c\/strong\u003e operates as a vital link inside the rack infrastructure, handling the real-time conversion, reception, transmission, and regeneration of complex voice, image, or process data streams across local and wide-area industrial control networks. Developed specifically for the Harmony Rack architecture within the Symphony Plus platform, the unit interfaces directly with centralized system controllers to distribute process variables, synchronization signals, and diagnostic reports. Its onboard microprocessor independently processes communication protocols to alleviate host controller overhead and maintain determinism during dense network traffic conditions.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDedicated communication processor handling real-time switching and data routing routines.\u003c\/li\u003e\n\u003cli\u003eIntegrates seamlessly within Harmony Rack (HR Series) hardware sub-racks.\u003c\/li\u003e\n\u003cli\u003eOnboard memory backed by a long-life internal lithium button cell battery.\u003c\/li\u003e\n\u003cli\u003eBuilt-in signal regeneration properties to sustain data integrity across extensive physical network loops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-speed process communication bridging inside Symphony Plus control systems.\u003c\/li\u003e\n\u003cli\u003ePlant-wide data highway interfacing and network segment control within HR Series environments.\u003c\/li\u003e\n\u003cli\u003eHigh-volume data conversion and switching in power generation and heavy industrial process automation networks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eABB \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSPNPM22 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct ID\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSPNPM22 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eABB Type Designation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSPNPM22 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCatalog Description\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNetwork Processing Module \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCommunication Module \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Batteries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery Chemical Composition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLithium \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eButton Cell \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 g \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Depth \/ Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e73.66 mm \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e360.68 mm \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e279.4 mm \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Net Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 kg (Card component weights vary by configuration) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHS Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e851762 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCustoms Tariff Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85176200 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWEEE Category\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5. Small Equipment (No External Dimension More Than 50 cm) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Alignment:\u003c\/strong\u003e Match the communications module card guides with the dedicated network processing slots inside the Symphony Plus Harmony Rack chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackplane Connection:\u003c\/strong\u003e Slide the module smoothly until the high-density backplane pin connectors interface completely with the passive rack distribution board. Secure all faceplate locking screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Cable Routing:\u003c\/strong\u003e Arrange communication cables with proper physical segregation from high-voltage motor or drive power lines to minimize potential electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Inspection:\u003c\/strong\u003e Verify the internal 5 g lithium button cell is correctly placed and activated if pre-startup parameters or internal time-clocks must be preserved through prolonged total power outages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation Check:\u003c\/strong\u003e Ensure adjacent slot blanks are fitted with standard panels to preserve correct forced-air thermal circulation streams through the electronics chassis.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668615033195,"sku":"SPNPM22","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-spnpm22-bailey-network-processor-module-cshlmhajdy1_dfb105df-0ed9-4255-948d-9687976bfecd.jpg?v=1765535633"},{"product_id":"abb-ci920s-3bds014111-communication-interface-cipb-ex","title":"ABB CI920S 3BDS014111 Communication Interface CIPB-Ex","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe ABB CI920S 3BDS014111 (3BDS014111-50) is a specialized communication interface module designed for hazardous area applications within the ABB AC500 PLC and control system ecosystem. Operating as a CIPB-Ex interface, this module facilitates secure, explosion-protected data exchange and networking capabilities for distributed control and automation architectures. It provides reliable connectivity between standard control environments and field devices installed in potentially explosive atmospheres.\u003c\/p\u003e\n\u003cp\u003eEngineered for demanding industrial installations, the CI920S module supports robust communication protocols to ensure deterministic data transfer and high network availability. Its design integrates diagnostic features that simplify system monitoring, error detection, and maintenance workflows, contributing to maximized uptime in continuous process industries.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for ABB AC500 control system architectures and related automation platforms\u003c\/li\u003e\n  \u003cli\u003eExplosion-protected CIPB-Ex specification for hazardous industrial locations\u003c\/li\u003e\n  \u003cli\u003eHigh-integrity communication interface supporting reliable field device networking\u003c\/li\u003e\n  \u003cli\u003eIntegrated diagnostic indicators for rapid status monitoring and troubleshooting\u003c\/li\u003e\n  \u003cli\u003eRobust industrial construction built to withstand harsh environmental conditions\u003c\/li\u003e\n  \u003cli\u003eDIN-rail mountable for efficient panel integration and space-saving installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProcess automation and control in oil, gas, and petrochemical facilities\u003c\/li\u003e\n  \u003cli\u003eChemical and pharmaceutical manufacturing plants with hazardous classification areas\u003c\/li\u003e\n  \u003cli\u003eWater and wastewater treatment infrastructure requiring remote telemetry\u003c\/li\u003e\n  \u003cli\u003ePower generation and distribution control systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eABB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExact Model\u003c\/td\u003e\n      \u003ctd\u003eCI920S \/ 3BDS014111\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eCommunication Interface CIPB-Ex\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Range\u003c\/td\u003e\n      \u003ctd\u003eABB AC500\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Type\u003c\/td\u003e\n      \u003ctd\u003eDIN Rail\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eSweden\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight\u003c\/td\u003e\n      \u003ctd\u003e0.12 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e2.0 x 10.5 x 11.0 cm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eVerify the part number and inspect the CI920S module for any transit damage prior to installation.\u003c\/li\u003e\n  \u003cli\u003eEnsure all power to the control panel and associated backplanes is de-energized and locked out.\u003c\/li\u003e\n  \u003cli\u003eMount the communication interface securely onto the designated DIN rail within the cabinet.\u003c\/li\u003e\n  \u003cli\u003eConnect ground and shielding provisions according to hazardous area wiring standards.\u003c\/li\u003e\n  \u003cli\u003eAttach communication cables and apply power to initiate configuration and network handshaking.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668615098731,"sku":"CI920S 3BDS014111","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-ci920s-3bds014111-communication-interface-cipb-ex-rzp1p0jof4j_aae146b1-0581-447d-843a-25d5239298e1.jpg?v=1765535635"},{"product_id":"abb-3bse018137r1-ci858-1-communication-interface-module","title":"ABB 3BSE018137R1 CI858-1 Communication Interface Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe ABB 3BSE018137R1 CI858-1 is a dedicated communication interface module engineered specifically for the ABB AC 800M distributed control system. This module functions primarily as an Ethernet router interface, connecting the control system network to external devices and subsystems. It enables reliable, high-speed data exchange across industrial networks to support real-time process monitoring, system diagnostics, and plant-wide automation integration.\u003c\/p\u003e\n\u003cp\u003eBuilt for demanding industrial environments, the CI858-1 module mounts directly onto the standard Modular Controller DIN rail and interfaces with the system backplane. It supports deterministic data transfer rates required by high-availability process control applications, ensuring stable communication between controllers, operator stations, and third-party systems.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for integration within the ABB AC 800M controller family\u003c\/li\u003e\n  \u003cli\u003eProvides Ethernet routing capabilities for network communication expansion\u003c\/li\u003e\n  \u003cli\u003eHigh-speed data transfer supporting real-time industrial automation demands\u003c\/li\u003e\n  \u003cli\u003eDirect DIN-rail mounting for efficient cabinet space utilization\u003c\/li\u003e\n  \u003cli\u003eLED status indicators for rapid operational diagnostics and troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDistributed Control Systems (DCS)\u003c\/li\u003e\n  \u003cli\u003ePower generation and distribution plants\u003c\/li\u003e\n  \u003cli\u003eOil, gas, and petrochemical processing facilities\u003c\/li\u003e\n  \u003cli\u003eWater and wastewater treatment automation\u003c\/li\u003e\n  \u003cli\u003eLarge-scale discrete and continuous manufacturing plants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eABB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eCommunication Interface Module\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModel \/ Ordering Number\u003c\/td\u003e\n      \u003ctd\u003e3BSE018137R1 CI858-1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Range\u003c\/td\u003e\n      \u003ctd\u003eABB AC 800M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCommunication Service\u003c\/td\u003e\n      \u003ctd\u003eEthernet Router\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Type\u003c\/td\u003e\n      \u003ctd\u003eDIN Rail (System Rail)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eSweden\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight\u003c\/td\u003e\n      \u003ctd\u003e0.08 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e12.2 cm x 9.6 cm x 1.5 cm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eVerify the part number and inspect the 3BSE018137R1 CI858-1 module for any physical shipping damage.\u003c\/li\u003e\n  \u003cli\u003eDe-energize the AC 800M controller rack and associated power supply feeds before installing hardware.\u003c\/li\u003e\n  \u003cli\u003eMount the module onto the designated DIN rail slot according to the system configuration drawings.\u003c\/li\u003e\n  \u003cli\u003eConnect the system bus connectors securely to establish backplane communication.\u003c\/li\u003e\n  \u003cli\u003eAttach all required Ethernet and network cabling to the appropriate interface ports.\u003c\/li\u003e\n  \u003cli\u003eRestore system power and configure the communication parameters using ABB Control Builder Professional software.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668615459179,"sku":"3BSE018137R1 CI858-1","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-3bse018137r1-ci858-1-communication-interface-module-u3kr2ew11h2_9d25d737-7da3-4dd0-9dd5-69cf98d9f449.jpg?v=1765535647"},{"product_id":"abb-ci840-3bse022457r1-profibus-dp-v1-communication-interface-module","title":"ABB CI840 3BSE022457R1 Profibus DP-V1 Communication Interface Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe ABB CI840 (3BSE022457R1) is a dedicated Profibus DP-V1 communication interface module engineered for the ABB Advant OCS and Freelance distributed control system architectures. This hardware unit functions as a master\/slave communication gateway, providing deterministic fieldbus connectivity between controller nodes and distributed peripheral I\/O racks.\u003c\/p\u003e\n\u003cp\u003eDesigned to support redundant configurations, the CI840 interface manages high-speed cyclical and acyclic data exchange over Profibus DP networks. It integrates directly into modular rack assemblies, executing protocol conversion and diagnostic monitoring to maintain real-time process visibility and network stability in continuous industrial operations.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports redundant Profibus DP-V1 master and slave communication configurations\u003c\/li\u003e\n  \u003cli\u003eEnables high-speed cyclical I\/O data transfer and acyclic parameter configuration\u003c\/li\u003e\n  \u003cli\u003eProvides optical isolation on communication ports to mitigate electrical interference\u003c\/li\u003e\n  \u003cli\u003eExecutes continuous hardware and network diagnostic monitoring with LED status indicators\u003c\/li\u003e\n  \u003cli\u003eMounts directly onto standard DIN rails within modular industrial controller racks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eInterfacing decentralized field I\/O stations with central process control systems\u003c\/li\u003e\n  \u003cli\u003eManaging PROFIBUS DP device networks in continuous process manufacturing plants\u003c\/li\u003e\n  \u003cli\u003eImplementing fault-tolerant, redundant communication paths for safety-critical loops\u003c\/li\u003e\n  \u003cli\u003eRetrofitting legacy distributed control network architectures with modern bus interfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eABB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct ID \/ Ordering Code\u003c\/td\u003e\n      \u003ctd\u003e3BSE022457R1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModel\u003c\/td\u003e\n      \u003ctd\u003eCI840\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003eProfibus Communication Module\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCommunication Protocol\u003c\/td\u003e\n      \u003ctd\u003eProfibus DP-V1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRedundancy Support\u003c\/td\u003e\n      \u003ctd\u003eYes (Media and Module Redundancy)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Type\u003c\/td\u003e\n      \u003ctd\u003eDIN Rail \/ Rack Mount\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eSweden\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCE Compliant\u003c\/li\u003e\n  \u003cli\u003eRoHS Compliant\u003c\/li\u003e\n  \u003cli\u003eProfibus DP Standard (IEC 61158 \/ IEC 61784)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52668616540523,"sku":"CI840 3BSE022457R1","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/abb-ci840-3bse022457r1-profibus-communications-d2qezhk5svb_a8d6fcf3-100d-4f09-b59b-c6437b5b026e.jpg?v=1765535688"}],"url":"https:\/\/www.plcprotech.com\/collections\/communication-networking.oembed?page=45","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}