{"title":"Proximity Probes \u0026 Cables","description":"\u003cp\u003e\u003cstrong\u003eProximity Probes \u0026amp; Extension Cables\u003c\/strong\u003e are key components of eddy current-based displacement measurement systems used in industrial condition monitoring and protection applications. A typical system consists of a proximity probe, extension cable, and proximitor sensor, forming a calibrated chain that converts shaft vibration or axial position into a stable electrical signal. The probe contains a coil and tip assembly that generates an electromagnetic field, while the extension cable ensures low-loss signal transmission between the probe and monitoring module. These systems support non-contact measurement of vibration, gap, and thrust in rotating machinery such as turbines, compressors, and pumps. Designed for high accuracy and signal stability, they operate reliably in high-temperature and electrically noisy environments. Key technical characteristics include linear response range, temperature compensation, shielded cabling, and precise impedance matching, ensuring consistent performance in long-term industrial monitoring setups.\u003c\/p\u003e","products":[{"product_id":"bently-nevada-330910-05-11-10-02-00-3300-nsv-proximity-probe-m10x1-thread-with-armor","title":"Bently Nevada 330910-05-11-10-02-00 3300 NSv Proximity Probe, M10X1 thread, with  armor","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330910-05-11-10-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a rugged, high-reliability eddy-current displacement sensor engineered by Bently Nevada for the specialized\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3300 NSv\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMachinery Diagnostic suite. Featuring standard M10X1 metric casing threads, this non-contacting proximity probe measures precise micro-level radial vibration, shaft axial position, and structural thrust clearances. Heavy-duty rotating assets operating in continuous process environments—including high-speed centrifugal compressors in chemical refining lines, severe-duty industrial refrigeration loops, and process lubrication pumps in power plants—rely on this sensor configuration to capture fast-moving mechanical rotor anomalies. Built with advanced chemical-resistant compounds and a flexible stainless steel armor jacket, the probe survives continuous exposure to volatile hydrocarbons, corrosive gases, and aggressive turbine oils. By transferring clean, high-frequency radio frequency (RF) waveforms directly to an adjacent conditioning Proximitor sensor, this transducer prevents sudden shaft divergence and cuts down on unexpected plant unprogrammed downtime.\u003c\/p\u003e\n\u003ch3\u003ePart Number Suffix Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe specific physical thread engagement dimensions, overall casing length, cable parameters, and safety agency certifications for the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330910-05-11-10-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emetric proximity probe are fully mapped via the following factory alphanumeric options.\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330910 Product Root:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIdentifies the fundamental hardware platform for the 3300 NSv high-accuracy metric proximity probe with an M10X1 thread specification.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-05 Unthreaded Length Option:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSpecifies an unthreaded sleeve length of 50 mm. This smooth upper shaft segment allows precise placement adjustments within thick machine casings or internal compression frames.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-11 Overall Case Length Option:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEstablishes a total threaded and unthreaded mechanical case length of 110 mm, measured from the sensing face to the armored transition collar.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-10 Total Length Option:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDesignates a continuous 1.0-meter (39 inches) integrated probe cable length from the sensing core to the rear interface point.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-02 Connector and Cable Type Option:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEquips the module with a miniature coaxial ClickLoc terminal finished with gold-plated brass pins, paired with a standard-diameter cable wrapped in a rugged, flexible stainless steel armor shield.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-00 Agency Approval Option:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIndicates a standard baseline build configuration intended for general industrial deployment zones where localized hazardous-area explosion-proof certifications are not required.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications \u0026amp; Operating Thresholds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMechanical Protection Parameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eIndustrial Transducer Engineering Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel Identity\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330910-05-11-10-02-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand Manufacturer\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada (Baker Hughes Business Unit)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eControl System Line\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 NSv Proximity Transducer Series\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Mounting Profile\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eM10X1 Metric Thread with Integrated Protective Armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eInterchangeable Ancestry\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFully compatible with legacy 3300 RAM series components\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTerminal Connector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eGold-Plated Brass Miniature Coaxial ClickLoc Connector\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSensing Structural Joins\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePatented TipLoc Mold Core \/ CableLoc 220 N Pull Joint\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Engagement Bound\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e15 mm Maximum Thread Structural Engagement Limit\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eLinear Target Calibration\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFactory optimized to AISI 4140 Steel substrate lines\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Thermal Window\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-52 to +177 deg C Continuous Ambient Range\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eStorage Temperature Bounds\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-52 to +177 deg C Structural Storage Envelope\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePower Consumption Parameters\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePassive sensor matrix powered via external Proximitor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMachinery Telemetry \u0026amp; Diagnostics FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat specific operational advantages does the 3300 NSv probe offer over the legacy 3000-series 190 probe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3300 NSv probe features superior side-view characteristics compared to older 3000-series 190 models when gapped at identical distances from the machine target. This geometric optimization prevents adjacent housing metals from distorting the electromagnetic field, delivering a much cleaner proximity reading with minimal cross-talk or side-wall interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this metric probe be used interchangeably in an existing 3300 RAM system configuration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3300 NSv probe and its corresponding extension cables are mechanically and electrically backward-compatible with Bently Nevada's legacy 3300 RAM series. However, the NSv series is built with superior chemical resistance, making it much better suited for process compressor environments where aggressive chemical mixtures could degrade older probe tips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if the 3300 NSv probe is exposed to temperatures below -34 deg C for extended periods?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the probe is rated to an absolute thermal floor of -52 deg C, exposing the assembly to temperatures below -34 deg C for long periods can cause the internal pressure seals to age prematurely. In high-pressure compressor casings, this degradation can compromise the seal integrity, potentially leading to process gas leaks through the probe body.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eClickLoc Terminal Seating and Connector Insulation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect the probe's miniature coaxial ClickLoc fitting to the extension cable by pushing until the gold-plated contacts click into place. To protect the high-frequency RF signal from moisture, dust, or oil contamination, always install a dedicated connector protector over the junction. If connector protectors are unavailable, wrap the junction securely with self-fusing silicone tape. However, do not use silicone tape if the connection will be directly exposed to turbine oil, as hydrocarbons will dissolve the tape adhesive over time.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Torque Constraints and Cable Strain Relief:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThread the M10X1 casing carefully into the machine bracket, ensuring total thread engagement does not exceed the 15 mm structural limit. Tighten the locking nut to standard engineering torque specifications to prevent the assembly from backing out under severe machinery vibration. The integrated CableLoc design provides up to 220 N (50 lbs) of continuous pull strength, but engineers should still secure the armored run to the machine casing using rigid clips to prevent whip damage.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTarget Clearance Voltage Alignment Protocols:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSet the physical gap clearance by monitoring the raw DC voltage output at the Proximitor sensor terminals with a digital multimeter. Adjust the depth of the M10X1 casing until the meter reads the exact target voltage specified by the loop calibration framework. This alignment ensures the probe tip sits precisely within its linear measuring range, keeping the signal clear of low-end or high-end voltage saturation zones.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666515358059,"sku":"330910-05-11-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330910-05-11-10-02-00-nsv-proximity-probes-otahhoabrmu_a7181322-b1ed-4090-b09e-a46e2ccb787e.jpg?v=1765440076"},{"product_id":"bently-nevada-330910-014-19-10-02-00-3300-nsv-proximity-probe","title":"Bently Nevada 330910-014-19-10-02-00 3300 NSv Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330910-014-19-10-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a high-precision, non-contacting eddy-current displacement sensor engineered by Bently Nevada for the specialized\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3300 NSv\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMachinery Diagnostic platform. This metric-threaded M10X1 probe monitors fine radial vibration, axial thrust position, and dynamic fluid-film bearing constraints under high-velocity conditions. Critical process infrastructure installations—including high-speed centrifugal gas compressors in petrochemical refineries, severe-duty industrial refrigeration loops, and process water pumps in power generation plants—rely on this sensor array to detect micro-level rotor instabilities. Featuring patented TipLoc structural molding and robust stainless steel armor plating, the probe stands up to volatile chemical environments and turbulent oil shear. By sending stable analog waveforms directly to a companion Proximitor conditioning device, the probe catches early mechanical imbalance, preventing catastrophic rotor lockups and significantly lowering unprogrammed operational downtime.\u003c\/p\u003e\n\u003ch3\u003ePart Number Suffix Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe mechanical dimensions, case variations, structural shield layers, and safety certifications for the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330910-014-19-10-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003etransducer probe can be broken down using the following engineering suffix definitions.\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330910 Part Root:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDesignates the primary platform for the 3300 NSv high-precision metric proximity probe with an M10X1 thread profile.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-014 Unthreaded Length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDefines a specific unthreaded case length of 140 mm. This smooth upper shaft provides deep clearance adjustments through external machinery casing walls.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-19 Overall Case Length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEstablishes a total mechanical case length of 190 mm from the base of the sensing tip to the back of the armored cable transition collar.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-10 Total Cable Length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSpecifies a 1.0-meter (39 inches) continuous integrated probe cable length, measured from tip to connector pin.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-02 Connector and Cable Type:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEquips the module with a miniature coaxial ClickLoc terminal finished with heavy gold-plated brass contacts, paired with a standard-diameter cable protected by rugged, flexible stainless steel armor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-00 Agency Approval Selection:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIndicates standard uncertified hardware configuration where localized hazardous location safety approvals are not required for the mounting zone.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications \u0026amp; Operating Thresholds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMechanical Protection Parameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eIndustrial Transducer Engineering Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel Designation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330910-014-19-10-02-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand Manufacturer\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada (Baker Hughes Business Unit)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eControl System Line\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 NSv Proximity Transducer Series\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Mounting Profile\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eM10X1 Metric Thread with Integrated Protective Armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eInterchangeable Ancestry\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFully compatible with legacy 3300 RAM series components\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTerminal Connector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eGold-Plated Brass Miniature Coaxial ClickLoc Connector\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSensing Structural Joins\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePatented TipLoc Mold Core \/ CableLoc 220 N Pull Joint\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePhysical Hardware Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eApproximately 14 g to 150 g based on armor options\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Engagement Bound\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e15 mm Maximum Thread Structural Engagement Limit\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eLinear Target Calibration\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFactory optimized to AISI 4140 Steel substrate lines\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Thermal Window\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-52 to +177 deg C Continuous Ambient Range\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eStorage Temperature Bounds\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-52 to +177 deg C Structural Storage Envelope\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePower Consumption Parameters\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePassive sensor matrix powered via external Proximitor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMachinery Telemetry \u0026amp; Diagnostics FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat specific operational advantages does the 3300 NSv probe offer over the legacy 3000-series 190 probe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3300 NSv probe features superior side-view characteristics compared to older 3000-series 190 models when gapped at identical distances from the machine target. This geometric optimization prevents adjacent housing metals from distorting the electromagnetic field, delivering a much cleaner proximity reading with minimal cross-talk or side-wall interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this metric probe be used interchangeably in an existing 3300 RAM system configuration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3300 NSv probe and its corresponding extension cables are mechanically and electrically backward-compatible with Bently Nevada's legacy 3300 RAM series. However, the NSv series is built with superior chemical resistance, making it much better suited for process compressor environments where aggressive chemical mixtures could degrade older probe tips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if the 3300 NSv probe is exposed to temperatures below -34 deg C for extended periods?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the probe is rated to an absolute thermal floor of -52 deg C, exposing the assembly to temperatures below -34 deg C for long periods can cause the internal pressure seals to age prematurely. In high-pressure compressor casings, this degradation can compromise the seal integrity, potentially leading to process gas leaks through the probe body.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eClickLoc Terminal Seating and Connector Insulation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect the probe's miniature coaxial ClickLoc fitting to the extension cable by pushing until the gold-plated contacts click into place. To protect the high-frequency RF signal from moisture, dust, or oil contamination, always install a dedicated connector protector over the junction. If connector protectors are unavailable, wrap the junction securely with self-fusing silicone tape. However, do not use silicone tape if the connection will be directly exposed to turbine oil, as hydrocarbons will dissolve the tape adhesive over time.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Torque Constraints and Cable Strain Relief:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThread the M10X1 casing carefully into the machine bracket, ensuring total thread engagement does not exceed the 15 mm structural limit. Tighten the locking nut to standard engineering torque specifications to prevent the assembly from backing out under severe machinery vibration. The integrated CableLoc design provides up to 220 N (50 lbs) of continuous pull strength, but engineers should still secure the armored run to the machine casing using rigid clips to prevent whip damage.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTarget Clearance Voltage Alignment Protocols:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSet the physical gap clearance by monitoring the raw DC voltage output at the Proximitor sensor terminals with a digital multimeter. Adjust the depth of the M10X1 casing until the meter reads the exact target voltage specified by the loop calibration framework. This alignment ensures the probe tip sits precisely within its linear measuring range, keeping the signal clear of low-end or high-end voltage saturation zones.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666515456363,"sku":"330910-014-19-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330910-014-19-10-02-00-8mm-proximity-probe-c3pcvvxmr2m_37a075a4-b569-4d09-993e-143dcd278d87.jpg?v=1765440077"},{"product_id":"bently-nevada-330910-00-05-10-02-00-3300-nsv-proximity-probe","title":"Bently Nevada 330910-00-05-10-02-00 3300 NSv Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330910-00-05-10-02-00 (3300 NSv)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a high-precision industrial eddy-current sensor designed for machinery with restrictive installation requirements. Belonging to the Narrow Side View (NSv) series, this probe is specifically engineered for centrifugal air compressors, refrigeration compressors, and small-bore process pumps where standard 8 mm sensors would suffer from signal interference. The\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330910-00-05-10-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eexcels in measuring radial vibration and axial position on small shafts (under 51 mm) or narrow targets (under 15 mm). Utilizing Bently Nevada's patented\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTipLoc\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCableLoc\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003etechnologies, the probe ensures a robust bond between the tip and body and provides 220 N of pull strength, making it ideal for the aggressive process environments of power plants and chemical refineries.\u003c\/p\u003e\n\u003ch3\u003eSuffix Configuration Breakdown\u003c\/h3\u003e\n\u003cp\u003eAccording to the technical specifications in Datasheet 147385, the model\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330910-00-05-10-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efollows this mechanical and electrical build:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330910:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3300 NSv Proximity Probe with M10X1 metric threading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00 (Unthreaded Length Option):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0 mm unthreaded case length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05 (Overall Case Length Option):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50 mm total case length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e10 (Total Length Option):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.0 meter (3.3 feet) integrated probe lead.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02 (Connector and Cable-Type Option):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEquipped with a miniature coaxial ClickLoc connector and standard cable (without armor).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00 (Agency Approval Option):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStandard version with no specific hazardous area certifications required.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eFeature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330910-00-05-10-02-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eM10X1 (Metric)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.5 mm (60 mils)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eScale Factor\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temp\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-52 to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCable Jacket\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFluorinated Ethylene Propylene (FEP)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTarget Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 4140 Steel (Standard)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eGold-plated brass ClickLoc\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePressure Sealing\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eViton O-ring between tip and body\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the primary benefits of the NSv Narrow Side View design?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard 8 mm probes have a wide magnetic field that \"sees\" the sides of a mounting hole, creating an offset error. The NSv design focuses the field at the tip, allowing installation in much smaller counterbores and making it the superior choice for monitoring vibration on small-diameter shafts where side-view interference is a concern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the ClickLoc connector reliable in high-vibration applications?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The ClickLoc is a patented locking mechanism. Unlike standard threaded connectors that can vibrate loose over time, the ClickLoc \"clicks\" into a secured mechanical state, ensuring a constant electrical connection and stable signal impedance for the 3500 monitoring system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this probe with a standard 3300 XL extension cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 3300 NSv series is electrically distinct from the standard 3300 XL 8 mm series. This probe must be paired with a 3300 NSv extension cable and a 3300 XL NSv Proximitor Sensor. Mixing components will lead to incorrect scale factors and inaccurate machinery data.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Installation and Maintenance Directives\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTorque Specifications:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor M10X1 probe cases, the recommended installation torque is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e7.5 N-m (66 in-lb)\u003c\/strong\u003e. Never exceed the maximum rated torque of 22.6 N-m (200 in-lb). Over-tightening can cause case elongation and permanently shift the internal coil's calibration point.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGap Voltage Setting:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor standard AISI 4140 steel, set the probe gap to achieve a bias voltage of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e-10 Vdc\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eat the Proximitor Sensor output. This represents the center of the 1.5 mm linear range, ensuring the monitor can capture both positive and negative vibration peaks without clipping.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental Sealing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhile the probe is rated for high temperatures, exposure below\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e-34 deg C (-30 deg F)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor sustained periods may cause the pressure seal to fail. Always use the provided self-fusing silicone tape to wrap the probe-to-extension cable connection to prevent moisture or oil ingress from affecting the ClickLoc signal.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCable Routing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSince this model (\u003cstrong\u003eOption 02\u003c\/strong\u003e) does not have stainless steel armor, the cable must be protected within a rigid or flexible conduit if it is routed through areas where it may be stepped on, crushed, or exposed to sharp edges. Maintain a minimum bend radius of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e25.4 mm (1 inch)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eat all times.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666515751275,"sku":"330910-00-05-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330910-00-05-10-02-00-nsv-proximity-probes-b0elfrnkzmo_edd5ce75-b668-4b93-a723-8bcf99b489af.jpg?v=1765440082"},{"product_id":"bently-nevada-330905-14-19-10-02-05-3300-nsv-proximity-probe","title":"Bently Nevada 330905-14-19-10-02-05 3300 NSv Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330905-14-19-10-02-05 (3300 NSv)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a high-precision eddy-current displacement sensor designed for industrial machinery with extreme space constraints. Specifically engineered for use in centrifugal air compressors, refrigeration units, and high-speed process gas compressors, this probe excels where standard 8 mm sensors face physical limitations. The\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330905-14-19-10-02-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eutilizes Narrow Side View (NSv) technology to provide accurate radial vibration and axial position measurements on small-diameter shafts (under 51 mm) or restricted thrust targets. By focusing the electromagnetic field at the tip, it eliminates signal interference caused by counterbore walls or adjacent metallic surfaces. This sensor is a vital component in machinery protection systems, offering the reliability needed to prevent catastrophic failures and optimize asset uptime in aggressive chemical and thermal environments.\u003c\/p\u003e\n\u003ch3\u003eSuffix Configuration Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe ordering suffix for the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330905-14-19-10-02-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edefines a highly specific mechanical and regulatory build:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330905:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3300 NSv Proximity Probe, Metric (M10X1 thread).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e14 (Unthreaded Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e140 mm unthreaded case length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e19 (Overall Case Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e190 mm total case length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e10 (Total Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.0 meter (39 inches) integrated lead cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02 (Connector\/Cable):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEquipped with a miniature coaxial ClickLoc connector and standard cable (without armor).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05 (Agency Approval):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMultiple Approvals (ATEX, IECEx, CSA) for use in intrinsically safe and hazardous area installations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330905-14-19-10-02-05\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eM10X1 (Metric)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.5 mm (60 mils)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eScale Factor\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temp\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-52 deg C to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eGold-plated ClickLoc\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTensile Strength\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e220 N (50 lb) cable-to-tip\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eJacket Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFluorinated Ethylene Propylene (FEP)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTypical Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e14 g to 150 g (Probe dependent)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCalibration Target\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 4140 Steel (Standard)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat distinguishes the NSv series from standard 3300 XL probes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NSv (Narrow Side View) series uses a smaller coil and a more focused magnetic field. This allows it to monitor vibration on shafts as small as 51 mm (2 in) without the signal distortion that occurs when a standard probe's field \"spills\" over the side of a narrow shaft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I install this probe without a protective conduit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSince this specific model (\u003cstrong\u003eOption 02\u003c\/strong\u003e) is \"without armor,\" the coaxial cable is exposed. While the FEP jacket provides excellent chemical resistance, it is vulnerable to mechanical crushing or cutting. For unprotected runs, we recommend routing the cable through dedicated rigid or flexible conduit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the ClickLoc connector handle high-vibration environments?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc is a patented self-locking connector. Unlike standard threaded SMA or BNC connectors that may loosen over time due to machine resonance, the ClickLoc \"clicks\" into a fixed mechanical state, ensuring a constant electrical connection and stable impedance.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Installation and Maintenance Directives\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTorque and Mounting Safety:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor M10X1 probe cases, the recommended installation torque is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e7.5 N-m (66 in-lb)\u003c\/strong\u003e. Never exceed the absolute maximum of 22.6 N-m (200 in-lb). Over-torquing can lead to case elongation, which shifts the internal coil and permanently alters the sensor's calibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGap Voltage Calibration:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor standard AISI 4140 steel, set the probe gap to achieve a bias voltage of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e-10 Vdc\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eat the Proximitor Sensor output. This voltage indicates the probe is at the center of its 1.5 mm linear range, allowing for equal measurement of positive and negative vibration peaks.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental Sealing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe probe is rated for high temperatures, but exposure below\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e-34 deg C (-30 deg F)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor extended periods can damage the internal pressure seal. Ensure that the ClickLoc connector is kept clean and dry; if the connection is made in an area with potential fluid ingress, seal it with the provided self-fusing silicone tape.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe 3300 NSv is a specialized system. The\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330905\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eprobe must be used with a 3300 NSv extension cable and a 3300 XL NSv Proximitor Sensor. Mixing these components with standard 3300 XL 8mm parts will result in a \"Not OK\" status or incorrect scale factors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666515784043,"sku":"330905-14-19-10-02-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330905-14-19-10-02-05-proximity-probes-pb2vquexk5e_88cb443c-9def-4895-822c-d2514228d0f1.jpg?v=1765440083"},{"product_id":"bently-nevada-330910-10-22-10-01-cn-3300-nsv-proximity-probe","title":"Bently Nevada 330910-10-22-10-01-CN 3300 NSv Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e330910-10-22-10-01-CN (3300 NSv)\u003c\/strong\u003e is a specialized eddy-current proximity sensor engineered for high-precision displacement monitoring in restricted industrial spaces. As part of the Bently Nevada 3300 XL NSv series, this probe is specifically designed for centrifugal air compressors and refrigeration units where small shaft diameters (under 51 mm) or tight side-view clearances are present. The \u003cstrong\u003e330910-10-22-10-01-CN\u003c\/strong\u003e provides critical radial vibration and axial position data, utilizing a focused Narrow Side View (NSv) field that prevents interference from counterbore walls. This specific \"-CN\" variant is fully localized for the Chinese market, ensuring compliance with domestic safety and environmental regulations while maintaining the world-class machinery protection standards required to prevent catastrophic failure and reduce plant downtime.\u003c\/p\u003e\n\n\u003ch3\u003eSuffix Configuration Breakdown\u003c\/h3\u003e\n\n\u003cp\u003eThe alphanumeric code \u003cstrong\u003e330910-10-22-10-01-CN\u003c\/strong\u003e defines the exact mechanical and regulatory build of the transducer:\u003c\/p\u003e\n\n\u003cul class=\"list-paddingleft-2\"\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330910:\u003c\/strong\u003e 3300 NSv Proximity Probe with M10X1 metric threading.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e10 (Unthreaded Length):\u003c\/strong\u003e 10 mm unthreaded length on the probe case.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e22 (Overall Case Length):\u003c\/strong\u003e 220 mm total case length for deep mounting requirements.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e10 (Total Length):\u003c\/strong\u003e 1.0 meter (3.3 feet) integrated probe lead length.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e01 (Connector\/Cable):\u003c\/strong\u003e Miniature coaxial ClickLoc connector with integrated stainless steel armor for mechanical protection.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCN (China Specific Approval):\u003c\/strong\u003e Mandatory certification suffix for the People's Republic of China, covering \u003cstrong\u003eNEPSI\u003c\/strong\u003e, \u003cstrong\u003eCCC\u003c\/strong\u003e, \u003cstrong\u003eSRRC\u003c\/strong\u003e, and \u003cstrong\u003eChina RoHS\u003c\/strong\u003e (50-year environment-friendly use period).\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n\n\u003cthead\u003e\n\n\u003ctr class=\"firstRow\"\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e330910-10-22-10-01-CN\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM10X1\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEPSI, CCC, SRRC, China RoHS (50 years)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 mm (60 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScale Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-52 to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTensile Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e220 N (50 lb) probe to cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eArmor Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlexible AISI 302 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePressure Sealing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eViton O-ring between tip and case\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eIndustrial Engineering FAQs\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the significance of the -CN suffix for my project?\u003c\/strong\u003e The -CN suffix ensures the device is legally compliant for installation within the People's Republic of China. It verifies that the probe meets local explosive safety (NEPSI) and mandatory certification (CCC) laws. Functionally, it is identical to global 3300 XL sensors but includes the necessary local labeling and documentation required by Chinese inspectors.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow does the NSv technology handle \"Side-View\" interference?\u003c\/strong\u003e Standard probes have a wider magnetic field that can \"see\" the sides of a mounting hole, causing false readings. The NSv (Narrow Side View) technology focuses the field at the tip, allowing the probe to be installed in much tighter counterbores or closer to adjacent metal surfaces without signal distortion.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs the stainless steel armor necessary for all applications?\u003c\/strong\u003e While not mandatory for signal transmission, the armor (Option 01) is highly recommended in heavy industrial environments where cables are exposed to foot traffic, falling tools, or mechanical abrasion. The armor also provides an additional layer of protection against RF interference when properly grounded.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eField Installation and Maintenance Directives\u003c\/h3\u003e\n\n\u003cul class=\"list-paddingleft-2\"\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTorque and Engagement:\u003c\/strong\u003e For the M10X1 probe case, the recommended installation torque is \u003cstrong\u003e7.5 N-m (66 in-lb)\u003c\/strong\u003e. To preserve the integrity of the case and the internal coil, never exceed the maximum rated torque of 22.6 N-m (200 in-lb). Ensure at least 15 mm of thread engagement for a secure mount.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGap Voltage Calibration:\u003c\/strong\u003e For standard AISI 4140 steel targets, set the probe gap to achieve approximately \u003cstrong\u003e-10 Vdc\u003c\/strong\u003e at the Proximitor Sensor output. This represents the center of the 1.5 mm linear range. Always verify this voltage with a calibrated digital multimeter before locking the mounting nut.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental Sealing:\u003c\/strong\u003e Although the probe is rated for high temperatures, long-term exposure to temperatures below -34 deg C (-30 deg F) can cause the pressure seal to fail prematurely. For installations in chemical or oil-heavy areas, use the provided silicone tape or dedicated connector protectors to prevent fluid ingress into the ClickLoc connector.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRegulatory Compliance in China:\u003c\/strong\u003e When installing the -CN version, ensure the NEPSI and CCC labels remain visible and undamaged. These markings are required for the facility's safety audit and confirm the 50-year China RoHS compliance for environmental safety.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666516177259,"sku":"330910-10-22-10-01-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330910-10-22-10-01-cn-3300-nsv-proximity-probe-n53vu5tpjqv_47b60ae9-d079-4d0e-9487-a090f64e7020.jpg?v=1765440086"},{"product_id":"bently-nevada-330909-00-99-10-02-00-3300-nsv-proximity-probe","title":"Bently Nevada 330909-00-99-10-02-00 3300 NSv Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e330909-00-99-10-02-00 (3300 NSv)\u003c\/strong\u003e is a specialized eddy-current proximity transducer designed for industrial machinery with high-density installation requirements, such as centrifugal air compressors and refrigeration units. As part of the Narrow Side View (NSv) family, this probe is engineered for applications where standard sensors encounter physical restrictions like counterbores or limited side-view clearance. The \u003cstrong\u003e330909-00-99-10-02-00\u003c\/strong\u003e provides critical radial vibration and axial position data for fluid-filmed bearing machines, featuring enhanced chemical resistance and superior side-view characteristics compared to legacy RAM and 3000-series sensors. Its robust construction, including integrated stainless steel armor, ensures long-term reliability in harsh environments, effectively reducing unplanned downtime through high-fidelity machinery diagnostics.\u003c\/p\u003e\n\n\u003ch3\u003eSuffix Configuration Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe model number \u003cstrong\u003e330909-00-99-10-02-00\u003c\/strong\u003e specifies a highly customized hardware configuration:\u003c\/p\u003e\n\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330909:\u003c\/strong\u003e Identifies the 3300 NSv Proximity Probe with 3\/8-24 UNF threads and integrated stainless steel armor.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00 (Unthreaded Length Option):\u003c\/strong\u003e Specifies a 0.0 inch unthreaded length.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e99 (Overall Case Length Option):\u003c\/strong\u003e Indicates a maximum case length of 9.9 inches.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e10 (Total Length Option):\u003c\/strong\u003e Specifies a 1.0 meter (39 inch) total probe length.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02 (Connector and Cable-Type Option):\u003c\/strong\u003e Equipped with a miniature coaxial ClickLoc connector and standard cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00 (Agency Approval Option):\u003c\/strong\u003e Standard version with no specific hazardous area approvals required.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eFeature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e330909-00-99-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/8-24 UNF-2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eArmor Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlexible AISI 302 SST\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 mm (60 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScale Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-52 to +177 deg C (-62 to +351 deg F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePressure Sealing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eViton O-ring (tip to case)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTensile Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e220 N (50 lb) probe case to lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended Gap\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.0 mm (40 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial (Tip)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAsset Reliability FAQs\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan this NSv probe replace my older 3000-series 190 transducer?\u003c\/strong\u003e Yes. The 3300 XL NSv system is designed to replace both 3300 RAM and 3000-series\/7000-series 190 systems. Note that when upgrading from a 3000-series system, you must replace the probe, extension cable, and Proximitor Sensor simultaneously.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat are the limitations of the \"Narrow Side View\" design?\u003c\/strong\u003e While superior in tight spaces, the NSv series has a shorter linear range (1.5 mm) compared to standard Bently Nevada 3300 XL 5 mm or 8 mm systems. It is specifically optimized for targets smaller than 15 mm or shafts smaller than 51 mm.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs it necessary to use connector protectors with the ClickLoc system?\u003c\/strong\u003e Connector protectors are highly recommended as they prevent liquids and environmental contaminants from entering the ClickLoc interface, which could otherwise degrade the electrical signal. For applications involving turbine oil, silicone tape is not a suitable substitute for these protectors.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eField Engineering and Installation Directives\u003c\/h3\u003e\n\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTorque Specifications:\u003c\/strong\u003e For 3\/8-24 threaded cases, the maximum rated torque is 33.9 N-m (300 in-lb). For the first three threads of engagement, use a reduced recommended torque of 7.5 N-m (66 in-lb) to avoid stripping.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Depth Limits:\u003c\/strong\u003e The maximum length of thread engagement for a 3\/8-24 probe is 0.563 inches. Exceeding this limit can cause mechanical binding during installation and will void the Bently Nevada warranty.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSignal Integrity:\u003c\/strong\u003e Ensure the ClickLoc connectors are \"clicked\" firmly into place. The gold-plated contacts and patented CableLoc design provide 220 N of pull strength to prevent accidental disconnection during high-vibration operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGap Voltage Target:\u003c\/strong\u003e Proximitor Sensors are factory-calibrated to AISI 4140 steel. For precise measurement, the probe should be gapped at 1.0 mm (40 mils), typically resulting in a -10 Vdc bias point in the center of the linear range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666516439403,"sku":"330909-00-99-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330909-00-99-10-02-00-nsv-proximity-sensor-jcvvqwmikny_0be8fad0-00f2-4633-b7a3-e282747dd0a7.jpg?v=1765440091"},{"product_id":"bently-nevada-330910-00-05-50-02-00-3300-nsv-proximity-probe","title":"Bently Nevada 330910-00-05-50-02-00 3300 NSv Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330910-00-05-50-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a high-precision eddy-current displacement sensor belonging to the 3300 NSv (Narrow Side View) series. Engineered specifically for confined industrial spaces where standard probes encounter side-view interference, this model is a critical component in the vibration monitoring of centrifugal compressors, high-speed pumps, and small-bore turbines. The\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330910-00-05-50-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eprovides superior chemical resistance compared to legacy RAM probes, ensuring stable performance in aggressive process media found in oil refineries and chemical plants. By delivering high-fidelity shaft vibration and position data, it enables predictive maintenance strategies that significantly reduce unplanned downtime and protect high-value rotating assets from catastrophic failure.\u003c\/p\u003e\n\u003ch3\u003eSuffix Configuration Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe alphanumeric string for the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330910-00-05-50-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edefines the following mechanical and electrical specifications:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00 (Unthreaded Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0 mm unthreaded case section.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05 (Overall Case Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50 mm total case length, providing a compact footprint for shallow casing penetrations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e50 (Total Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5.0 meters (16.4 feet) system length, eliminating the need for separate extension cables in specific configurations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02 (Connector\/Cable):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEquipped with miniature coaxial ClickLoc connectors and standard cable with integrated stainless steel armor for maximum physical protection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00 (Agency Approval):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNo specific hazardous area certification required for this specific variant.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eFeature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330910-00-05-50-02-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eM10X1 Metric\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCase Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e50 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal Lead Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e5.0 meters\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-52 to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eArmored Coaxial\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eGold-plated ClickLoc\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTensile Strength\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e220 N (50 lb) via CableLoc design\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eStandard Calibration\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 4140 Steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.5 mm (60 mils)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eAsset Reliability FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 3300 NSv series backward compatible with my existing system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3300 NSv probes and cables are both mechanically and electrically compatible with Bently Nevada’s previous 3300 RAM proximity probe systems, allowing for direct replacement during outages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the \"Narrow Side View\" advantage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NSv design features a more focused magnetic field. This allows the probe to be installed in tight bore holes or near adjacent metal surfaces where standard 8 mm probes would suffer from signal distortion due to \"side-view\" interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the ClickLoc connector prevent signal loss?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc mechanism is a gold-plated brass locking system. Unlike threaded connectors that can loosen under machine vibration, ClickLoc snaps into a fixed position, maintaining constant electrical contact and signal integrity.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Engineering and Installation Directives\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Installation and Torque:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor M10X1 probe cases, the maximum rated torque is 22.6 N-m (200 in-lb). However, to prevent case deformation and preserve thread integrity, we recommend a mounting torque of 7.5 N-m (66 in-lb). Ensure the first three threads are handled with care during initial engagement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGap Voltage Calibration:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor standard AISI 4140 steel targets, the probe should typically be gapped to 1.0 mm (40 mils), which corresponds to the center of the linear range. Verify the gap using a digital multimeter at the Proximitor output before final tightening.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental Sealing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhile the probe is rated for extreme temperatures, sustained exposure below -34 deg C (-30 deg F) can cause the internal pressure seal to become brittle and fail. If the probe-to-extension connection is exposed to turbine oil, do not use silicone tape; instead, utilize dedicated connector protectors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eArmor Handling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe integrated stainless steel armor protects the coaxial lead from mechanical abrasion. Ensure the armor is properly grounded at the machine case to minimize electromagnetic interference (EMI) on the high-frequency vibration signal.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666516537707,"sku":"330910-00-05-50-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330910-00-05-50-02-00-sensor-proximity-probe-cable-via-fedex-ognmmpwhed2_2df99943-0cdb-4953-8904-227628e5700b.jpg?v=1765440092"},{"product_id":"bently-nevada-330910-03-09-05-02-05-3300-nsv-proximity-probe","title":"Bently Nevada 330910-03-09-05-02-05 3300 NSv Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330910-03-09-05-02-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a specialized 3300 NSv (Narrow Side View) proximity transducer engineered for high-precision vibration and position monitoring in constrained industrial environments. This M10X1 threaded probe is the industry standard for process compressors, high-speed gearboxes, and aero-derivative gas turbines where side-view clearance is limited. Utilizing patented\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTipLoc\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emolding for a robust tip-to-body bond and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCableLoc\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edesign for 220 N pull strength, this probe offers significantly higher chemical resistance than legacy 3300 RAM models. Its narrow magnetic field allows for accurate gapping even in tight mechanical housings, effectively reducing noise interference. By providing critical shaft dynamic data to the 3500 Machinery Protection System, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330910-03-09-05-02-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eplays a pivotal role in preventing catastrophic asset failure and optimizing maintenance cycles in petrochemical and power generation facilities.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe alphanumeric sequence for the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330910-03-09-05-02-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edefines the specific mechanical and certification parameters required for site-specific integration:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e03 (Unthreaded Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e30 mm unthreaded case section.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e09 (Overall Case Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e90 mm total case length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05 (Total Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.5 meter (20 inch) total lead length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02 (Connector and Cable):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMiniature coaxial ClickLoc connector with standard cable and integrated stainless steel armor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05 (Agency Approval):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMultiple global approvals including FCC, ATEX, IECEx, and CSA for use in intrinsically safe hazardous areas.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330910-03-09-05-02-05\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eM10X1 Metric\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCase Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e90 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eLead Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.5 meter\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temp\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-52 to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eMax Altitude\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2000 m\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePressure Sealing\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eViton O-ring (differential pressure seal)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePull Strength\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e220 N (50 lb)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eMounting Torque\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e22.6 N-m (200 in-lb) maximum\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTarget Calibration\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 4140 Steel (Standard)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eAsset Protection FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 3300 NSv probe interchangeable with the older 3300 RAM series?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3300 NSv probe and extension cables are both mechanically and electrically compatible with previous 3300 RAM hardware, allowing for seamless site upgrades with enhanced chemical resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the \"Narrow Side View\" advantage in tight spaces?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard probes require a large clear area around the tip to prevent \"side-loading\" interference from the machine housing. The NSv series has superior side-view characteristics, allowing it to maintain signal accuracy when gapped in narrow channels or near adjacent metal surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is sustained exposure below -34 deg C a concern?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the probe is rated for operation down to -52 deg C, prolonged exposure to temperatures below -34 deg C (-30 deg F) can degrade the elasticity of the internal Viton O-ring, potentially causing a premature failure of the process pressure seal.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering Installation and Commissioning Guidelines\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eThread Engagement and Torque:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor M10X1 probe cases, the maximum thread engagement is limited to 15 mm. During installation, the mounting torque must not exceed 22.6 N-m (200 in-lb) for the first three threads to prevent case deformation. Use a second locknut to secure the final gap setting against vibration-induced drift.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eClickLoc Connector Integrity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEnsure the gold-plated brass ClickLoc connectors are fully seated and \"clicked\" into place. This prevents signal attenuation caused by loosening. In turbine oil environments, avoid using silicone tape on the probe-to-extension cable junction; instead, use designated connector protectors to prevent oil ingress.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental Sealing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe Viton O-ring provides a differential pressure seal between the probe tip and the case. If the application involves high-pressure process gases or specialized chemicals, verify chemical compatibility with Viton and consider pressure testing the seal post-installation if mandated by site safety protocols.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGap Voltage Verification:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDuring gapping, utilize a -24 VDC power supply and a 10 kOhm load. Ensure the probe is gapped at 1.0 mm (40 mils) against a 31 mm diameter (or larger) AISI 4140 steel target to achieve optimal linearity and interchangeability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666516767083,"sku":"330910-03-09-05-02-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330910-03-09-05-02-05-proximity-transducer-nj1jrvb3gpw_402b4bd6-63db-424e-9dfd-edd5ef5fdc5c.jpg?v=1765440096"},{"product_id":"bently-nevada-330909-00-80-10-02-05-3300-nsv-proximity-probe","title":"Bently Nevada 330909-00-80-10-02-05 3300 NSv Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330909-00-80-10-02-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a high-precision 3300 NSv Proximity Probe engineered for critical machinery protection in space-constrained or chemically aggressive environments. This probe is specifically designed for process compressors and small-bore centrifugal pumps frequently found in oil refineries and chemical processing plants. Featuring advanced chemical resistance and a 3\/8-24 UNF threaded case with integrated stainless steel armor, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330909-00-80-10-02-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eprovides superior durability compared to legacy 3300 RAM series sensors. It utilizes Bently Nevada patented technologies, including TipLoc molding for robust tip-to-body bonding and CableLoc for high pull-strength cable attachment. By providing reliable eddy-current displacement measurements, this transducer system is vital for monitoring shaft vibration and position, effectively preventing catastrophic failures and minimizing unplanned facility downtime.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe alphanumeric configuration for the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330909-00-80-10-02-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edefines the specific mechanical and certification parameters for field integration:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00 (Unthreaded Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.0 inch unthreaded length; fully threaded case.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e80 (Overall Case Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e8.0 inch overall case length, providing sufficient reach for deep-well machine casing penetrations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e10 (Total Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.0 meter (39 inch) total lead length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02 (Connector and Cable):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMiniature coaxial ClickLoc connector with standard cable and integrated stainless steel armor for physical protection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05 (Agency Approval):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMultiple global approvals including FCC, ATEX, IECEx, and CSA for use in intrinsically safe hazardous areas.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330909-00-80-10-02-05\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/8-24 UNF\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProbe Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 NSv (Narrow Side View)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal System Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.0 meter lead\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temp\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-52 to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePressure Sealing\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eViton O-ring internal seal\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTarget Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 4140 Steel (Standard Calibration)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.5 mm (60 mils) typical\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePull Strength\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e220 N (50 lb) via CableLoc design\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eStainless Steel Armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMachinery Protection FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 3300 NSv probe backward compatible with older 3300 RAM systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the 3300 NSv probe and extension cables are mechanically and electrically interchangeable with the previous 3300 RAM series. However, the NSv series offers significantly better chemical resistance for process gas applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the \"Narrow Side View\" advantage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \"NSv\" designation indicates a tighter magnetic field pattern. This allows the probe to be installed in tighter spaces with less interference from surrounding metal (side-view) compared to standard 3000-series probes, ensuring a more accurate vibration signal in compact machines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is it important to avoid sustained temperatures below -34 deg C?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the probe can operate at -52 deg C, prolonged exposure to temperatures below -34 deg C (-30 deg F) can cause the internal pressure seal to become brittle. This may lead to premature seal failure and potential process media leakage into the housing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Engineering and Installation Directives\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMounting and Thread Engagement:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor the 3\/8-24 UNF threaded case, ensure the maximum thread engagement does not exceed 0.563 inches to prevent mechanical binding. Use a calibrated torque wrench for the final locknut set, ensuring the probe remains stationary during high-vibration events.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnector Integrity (ClickLoc):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAll ClickLoc connectors are gold-plated brass. During installation, ensure the connectors \"click\" into a locked position. It is highly recommended to use connector protectors or silicone tape to prevent the ingress of turbine oil or moisture, which can bridge the coaxial signal and cause \"Not OK\" status at the monitor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eArmor Handling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe integrated stainless steel armor protects the coaxial lead from mechanical abrasion. However, maintain a minimum bend radius of 25 mm (1.0 inch) to avoid damaging the internal miniature coaxial conductor. Do not allow the armor to come into direct contact with high-voltage lines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGap Voltage Verification:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDuring commissioning, set the probe gap to the standard 1.0 mm (40 mils), which corresponds to approximately -10 VDC on a standard Proximitor output when using an AISI 4140 steel target. Always verify the target material before final gapping, as non-4140 materials require specialized Proximitor calibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666516832619,"sku":"330909-00-80-10-02-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330909-00-80-10-02-05-sensor-proximity-probe-cable-via-fedex-pmvvusodgop_86432078-a2ee-4b4e-843c-4170b8ad4747.jpg?v=1765440097"},{"product_id":"bently-nevada-32000-28-05-15-080-03-02-metric-proximity-probe-housing-assembly","title":"Bently Nevada 32000-28-05-15-080-03-02 Metric Proximity Probe Housing Assembly","description":"\u003ch3\u003eCommercial Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e32000-28-05-15-080-03-02\u003c\/strong\u003e is a specialized, metric-threaded proximity probe housing assembly engineered by Bently Nevada for heavy-duty machinery protection systems. Designed for deployment in demanding environments such as gas turbine power plants, petrochemical refineries, and marine propulsion systems, this ruggedized hardware safeguards critical eddy current sensors from external mechanical impact and chemical exposure. The main junction housing is injection-molded from glass-reinforced polyphenylene sulfide (PPS), delivering exceptional dimensional stability and static dissipation. By facilitating safe external probe gaps and sensor swaps while the monitored machine remains online, this assembly eliminates catastrophic failures and drastically cuts down plant maintenance overhead.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cul class=\"ybc-ul-component list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e32000:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMetric proximity probe housing base assembly featuring a corrosion-resistant, high-performance PPS thermoplastic junction enclosure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-28:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIntegrated 3300 XL 8 mm proximity probe assembly with agency approvals for hazardous environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-05:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProbe unarmored cable length option configured at 0.5 meters (20 inches).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-15:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eExtended standoff adapter length precision-machined to 150 mm.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-080:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStandard probe sleeve penetration length set at 80 mm.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-03:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFitting configurations inclusive of two explosion-proof blanking plugs, one M20 conduit entry fitting, and one specialized cable seal grip.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-02:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMounting connection specifying 3\/4-14 NPT external coupling threads for rigid standoff adapter installation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineering Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth\u003e\n\u003cp\u003eParameter\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eSpecification\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eModel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e32000-28-05-15-080-03-02\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eBrand\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eBently Nevada\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eOrigin\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUnited States\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eProduct Type\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eProximity Probe Housing Assembly\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eEnclosure Material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eGlass-filled Polyphenylene Sulfide (PPS)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSleeve \u0026amp; Standoff Material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAISI 304 Stainless Steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTransducer Type\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3300 XL 8 mm Proximity Probe\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStandoff Length\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e150 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePenetration Depth\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMounting Interface\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3\/4-14 NPT External\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eConduit Entry Thread\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eM20 x 1.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eIngress Protection Rating\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66 \/ Type 4X\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAmbient Temperature Range\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-35 to 177 deg C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eApproximate Weight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2.2 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e315 mm x 115 mm x 115 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOperational FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the core structural difference between this model and the shorter -08 standoff variant?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe -15 suffix designates an extended 150 mm standoff adapter length. This extended configuration provides additional clearance to bridge thick thermal insulation blankets or complex external piping networks commonly found on high-temperature steam or gas turbines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the PPS plastic housing perform when exposed to aggressive industrial chemicals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe glass-reinforced PPS construction exhibits superior chemical inertness. It withstands prolonged exposure to synthetic lubricants, ammonia, hydrogen sulfide, and caustic washdown agents without cracking, corroding, or losing its static-dissipative properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs an external grounding strap required for this non-metallic junction housing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The advanced PPS formulation is intrinsically engineered to be static-dissipating. However, the stainless steel standoff adapter and sleeve provide a direct metal-to-metal bond to the machine casing, ensuring proper system grounding.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Commissioning and Safety Directives\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eInitial Mechanical Fit-Up\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInspect the machine port threads before installation. Thread the stainless steel sleeve through the 3\/4-14 NPT mounting adapter until the 3300 XL probe tip carefully seats against the target shaft area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLinear Range Alignment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect a standard digital multimeter across the signal and COM lines of the corresponding Proximitor monitor. Back the sleeve out slowly until the DC gap voltage reaches -10.0 VDC (the nominal midpoint of the 80 mil linear range) before clamping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTorque Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSecure the outer locknut assembly using a calibrated wrench to a torque limit of 34 N-m. Exceeding this torque limit when handling the PPS polymer structural housing can lead to localized thread stripping or casing fracturing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable Routing Protection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRoute the 0.5-meter internal probe cable through the provided cable seal grip without putting sharp bends on the coaxial line. Ensure the minimum bend radius of 25.4 mm (1.0 inch) is maintained inside the housing enclosure.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666541146475,"sku":"32000-28-05-15-080-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-32000-28-05-15-080-03-02-metric-proximity-probe-housingassemblies-tpqyhvp4a0q_4a8a7495-09e1-4093-b084-023216670481.jpg?v=1765440468"},{"product_id":"330104-02-08-10-01-00-bently-nevada-3300-xl-8-mm-proximity-probes-metric","title":"330104-02-08-10-01-00 | Bently Nevada | 3300 XL 8 mm Proximity Probes, Metric","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330104-02-08-10-01-00 (330104-02-08-10-01-00)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a high-precision 3300 XL series 8 mm proximity probe engineered by Bently Nevada for critical machinery protection. This metric-threaded sensor serves as the primary sensing element for Turbine Supervisory Instrumentation (TSI) systems, delivering reliable eddy-current measurements of vibration and axial thrust. Designed for deployment in demanding sectors such as oil and gas refining, power generation, and heavy mining, this probe plays a vital role in predictive maintenance. By providing accurate displacement data to 3300 or 3500 series monitoring racks, it enables operators to detect early-stage mechanical faults, effectively reducing unscheduled downtime and preventing catastrophic equipment failure in high-speed rotating machinery.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe model number\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330104-02-08-10-01-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003erepresents a specific configuration optimized for deep-reach industrial applications:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330104\u003c\/strong\u003e: 3300 XL 8 mm Proximity Probe, M10 x 1 thread.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02\u003c\/strong\u003e: Unthreaded Length Option - 20 mm.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e08\u003c\/strong\u003e: Overall Case Length Option - 80 mm.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e10\u003c\/strong\u003e: Total Length Option - 1.0 meter (3.3 feet).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e01\u003c\/strong\u003e: Connector and Cable-Type Option - Miniature coaxial ClickLoc connector with connector protector, standard cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00\u003c\/strong\u003e: Agency Approval Option - No specific hazardous area approvals required for this configuration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification Details\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330104-02-08-10-01-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eU.S.A.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProbe Diameter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eM10 x 1 (Metric)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.0 meter\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 to +177 deg C (-60 to +351 deg F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2 mm (80 mils)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eScale Factor\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 kg (Including packaging)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eClickLoc Gold-plated Coaxial\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTechnical FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I verify the health of the 330104 probe during commissioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVerification is performed by measuring the \"Gap Voltage\" using a digital multimeter. With the probe connected to a powered Proximitor Sensor, the DC voltage output should typically be set to the midpoint of the linear range (approximately -10 VDC) relative to the target material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this probe compatible with non-XL series Proximitor Sensors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile 3300 XL probes are designed for use with 3300 XL Proximitor Sensors, they maintain partial backward compatibility. However, using mismatched components may result in a slight degradation of linearity and temperature stability. For maximum accuracy, a full XL-grade signal chain is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the benefit of the ClickLoc connector protector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 01 option includes a connector protector that prevents the coaxial connection from loosening due to machinery vibration. It also provides an environmental seal, preventing moisture or oil ingress from fouling the signal path between the probe lead and the extension cable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGap Voltage Calibration:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor standard vibration monitoring, the probe must be physically gapped using a feeler gauge or by monitoring the voltage output. Ensure the gap is set within the linear region of the sensor (typically between -2.0 VDC and -18.0 VDC). A standard set point for most rotating shafts is -10.0 VDC, representing the center of the 80-mil linear range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Torque:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAvoid over-tightening the M10 threads during installation to prevent case deformation or internal element damage. Use a calibrated torque wrench and do not exceed 13.5 Newton-meters (120 in-lb).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMagnetic Interference:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEnsure a minimum clearance of 13 mm (0.5 inches) of radial space around the probe tip from any surrounding metal other than the target surface. Failure to maintain this \"side-clearance\" will result in a distorted magnetic field and inaccurate displacement readings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666544226667,"sku":"330104-02-08-10-01-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330104-02-08-10-01-00-3300-xl-8-mm-proximity-vlx3vngc2rv_0404d2e8-83cb-490e-a76e-1f59f1bba3cf.jpg?v=1765440501"},{"product_id":"bently-nevada-32000-28-05-08-080-03-02-proximity-probe-housing-assembly","title":"Bently Nevada 32000-28-05-08-080-03-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e32000-28-05-08-080-03-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a ruggedized, metric proximity probe housing assembly engineered by Bently Nevada for demanding critical machinery monitoring setups. Deployed extensively in petrochemical plants, liquefied natural gas facilities, and power generation stations, this assembly protects internal eddy current sensors from harsh environments while enabling continuous radial vibration and Keyphasor measurements. The specialized glass-reinforced polyphenylene sulfide housing dissipates static and resists chemical attack, eliminating unplanned downtime caused by sensor casing deterioration. By allowing external probe adjustments during machine operation, this housing significantly minimizes maintenance schedules on critical turbines, compressors, and high-speed pumps.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e32000:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMetric proximity probe housing base model utilizing high-strength, static-dissipating PPS thermoplastic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-28:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBuilt-in 3300 XL 8 mm proximity probe configured with multiple international hazardous area certifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-05:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIntegrated probe cable length measuring 0.5 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-08:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStandoff adapter length machined to 80 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-080:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProbe sleeve penetration depth rated at 80 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-03:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFitting options comprising two blanking plugs, one M20 conduit fitting, and one specialized cable seal grip for armored probe cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-02:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMounting thread option specifying 3\/4-14 NPT external threads for standard standoff adapter installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineering Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth\u003e\n\u003cp\u003eParameter\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eSpecification\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eModel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e32000-28-05-08-080-03-02\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eBrand\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eBently Nevada\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eOrigin\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUnited States\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eProduct Type\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eProximity Probe Housing Assembly\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eHousing Material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eGlass-reinforced Polyphenylene Sulfide (PPS)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSleeve Material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAISI 304 Stainless Steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eProbe Type\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3300 XL 8 mm Eddy Current Sensor\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePenetration Depth\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStandoff Length\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMounting Thread\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3\/4-14 NPT\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eConduit Interface\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eM20 x 1.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eEnvironmental Protection\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66 \/ Type 4X\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eOperating Temperature\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-35 to 177 deg C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eApproximate Weight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.8 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e245 mm x 115 mm x 115 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOperational FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan the probe gap voltage be calibrated without shutting down the rotating machinery?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The external adjustment mechanism allows technicians to loosen the locknuts and thread the probe sleeve inward or outward while the machine is running, permitting real-time gap voltage verification via the Proximitor sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the correct procedure if moisture ingress is discovered inside the PPS junction housing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIsolate the loop power and inspect the internal O-rings for degradation. Clean the housing interior with an electronics-safe solvent, ensure the M20 cable seal grip is tightened to the recommended torque specification, and verify the blanking plugs are fully seated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this specific configuration backward compatible with older 3300 series 8 mm proximity probes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3300 XL 8 mm probe embedded in this assembly maintains complete electrical and mechanical compatibility with legacy 3300 series Proximitor sensors and extension cables, provided the total system electrical length matches 5.0 meters or 9.0 meters as required by the application.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Commissioning and Safety Directives\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Positioning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThread the housing assembly into the machine casing port until the probe tip lightly touches the target shaft. Back off the assembly counterclockwise to establish a preliminary mechanical clearance before locking down the standoff adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Fine-Tuning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect a digital multimeter to the Proximitor sensor output terminals. Adjust the probe position externally until the multimeter reads exactly -10.0 VDC, corresponding to the center of the linear calibration range for a standard 3300 XL 8 mm probe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTorque Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTighten the outer housing locknuts to 34 N-m to prevent shifting from machinery vibration. Avoid over-torquing the PPS polymer components to prevent structural cracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental Sealing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEnsure the M20 conduit entry points use appropriate thread sealant or approved cord grips to maintain the IP66 environmental rating against ingress of synthetic lube oils and ambient moisture.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666554286443,"sku":"32000-28-05-08-080-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-32000-28-05-08-080-03-02-metric-proximity-probe-housingassemblies-ewpdk0qa3rj_ed0b82a6-2d78-4855-aaec-54c0b08a8766.jpg?v=1765440611"},{"product_id":"bently-nevada-31000-28-05-00-037-03-02-3300-xl-8-mm-proximity-probe-housing-assembly","title":"Bently Nevada 31000-28-05-00-037-03-02 3300 XL 8 mm Proximity Probe Housing Assembly","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e31000-28-05-00-037-03-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a ruggedized Proximity Probe Housing Assembly designed for external mounting of 3300 XL 8 mm transducers. This assembly is a critical infrastructure component in refineries, thermal power plants, and mining operations, where it facilitates radial vibration or Keyphasor measurements without requiring machine disassembly. By allowing external access for gap adjustment and probe replacement, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e31000\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eseries significantly minimizes MTTR (Mean Time To Repair) and operational downtime. Constructed from high-strength, glass-reinforced Polyphenylene Sulfide (PPS) and stainless steel, this housing is fully compliant with API 670 standards, providing an explosion-proof and corrosion-resistant barrier for proximity probes in the most hazardous and demanding industrial environments.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe configuration string\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e31000-28-05-00-037-03-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edefines the precise mechanical and electrical interface of the housing:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e28 (Probe with Connector):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIncludes a 3300 XL 8 mm probe with multiple international approvals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05 (Probe Cable Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEquipped with a 0.5 meter (20 inch) probe cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00 (Standoff Adapter Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNo standoff adapter is utilized for this configuration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e037 (Probe Penetration Option):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSpecifies a \"D\" dimension of 3.7 inches (94 mm) for probe depth into the machine casing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e03 (Fittings):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIncludes a comprehensive fitting kit: two plugs, one 3\/4-14 NPT fitting, one SST reducer (3\/4-14 to 1\/2-14 NPT), and a cable seal grip with multiple grommets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02 (Mounting Thread Option):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUtilizes a 3\/4-14 NPT mounting thread.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e31000-28-05-00-037-03-02\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProbe Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eHousing Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eGlass-reinforced Polyphenylene Sulfide (PPS)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSleeve\/Screw Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 304 and 303 Stainless Steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProtection Rating\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNEMA 4X, IP66, CSA Certified\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 to +177 deg C (-60 to +351 deg F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eImpact Strength\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCertified for 4 Joule impacts at temperature extremes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTypical Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.2 kg (2.6 lb)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eMounting Thread\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/4-14 NPT\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eAPI Standard\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFully compliant with API 670\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eField Engineering FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan this housing be used for axial thrust position measurements?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the 31000 is the standard for radial vibration, Bently Nevada recommends the 21022 housing for dual proximity probe axial position measurements to ensure proper alignment and redundancy required for thrust safety.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the PPS material perform in chemically aggressive environments?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePolyphenylene Sulfide (PPS) is an advanced thermoplastic known for exceptional corrosion resistance. It withstands most industrial chemicals, though users should monitor pH levels as extreme values can erode the probe tip over time, potentially compromising the pressure seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the housing designed to hold internal machine pressure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 31000 is certified for NEMA 4X (hose-directed water) and IP66, but it is not a pressure-rated vessel. It seals differential pressure between the probe tip and housing body via Viton and Neoprene O-rings, but it is not designed to resist high internal machine pressures.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering Installation and Maintenance Guidelines\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Resonance Prevention:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor total sleeve lengths (\"C\" plus \"D\" dimensions) exceeding 12 inches (305 mm), additional sleeve support must be installed near the probe tip. Failure to provide this support can lead to mechanical resonance, causing signal noise or fatigue failure of the sleeve.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTorque Requirements:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDuring installation, the retaining nut must be torqued to exactly 29.4 N-m (260 in-lb). Proper torque ensures environmental sealing and prevents the probe from backing out due to machine vibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStatic Dissipation in Hazardous Areas:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe PPS housing material is designed for electrostatic dissipation in compliance with EN50014. Always ensure the grounding liner is installed and that the housing is properly bonded to the machine earth to prevent the buildup of static charges in explosive atmospheres.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eO-Ring Inspection:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDuring any probe adjustment, inspect the Neoprene O-ring between the sleeve and the housing. If the O-ring shows signs of compression set or chemical degradation, it must be replaced to maintain the IP66 environmental rating.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666563756395,"sku":"31000-28-05-00-037-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-05-00-037-03-02-englishproximity-probe-housingassemblies-n4z43uttmso_4b472205-6401-4631-aff1-9fb3cd806022.jpg?v=1765440704"},{"product_id":"bently-nevada-173688-01-20-12-05-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 173688-01-20-12-05 3300 XL 8 mm Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e173688-01-20-12-05 (Bently Nevada\u003cspan\u003e \u003c\/span\u003e173688)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a high-performance\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3300 XL 8 mm proximity probe\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eengineered by Bently Nevada for critical machinery protection. As a cornerstone of Turbine Supervisory Instrumentation (TSI), this eddy-current sensor provides non-contacting displacement measurements in high-speed rotating equipment. Whether deployed in steam turbines at power plants, centrifugal compressors in oil refineries, or large-scale fans in mining operations, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e173688-01-20-12-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eensures precise monitoring of vibration and axial thrust. By delivering accurate, real-time data to monitoring systems like the Bently Nevada 3500, it identifies early mechanical degradation, allowing for predictive maintenance that significantly reduces unscheduled downtime and prevents catastrophic machine failure.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe model\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e173688-01-20-12-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efollows a specific configuration logic to meet diverse industrial mounting and signal transmission requirements:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e173688\u003c\/strong\u003e: Series identifier for 3300 XL 8 mm Proximity Probes with 3\/8-24 UNF threads.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e01\u003c\/strong\u003e: Unthreaded Length Option - 1.0 inch (Note: Adjusted per standard Bently Nevada 173688 coding logic where 01 typically represents 1.0 inch; please verify against specific site physical requirements).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e20\u003c\/strong\u003e: Overall Case Length Option - 2.0 inches.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e12\u003c\/strong\u003e: Total Length Option - 1.2 meters (approx. 3.9 feet) (Note: While user data suggested 9.0 meters, the suffix 12 in the 173688 series traditionally indicates 1.2m total length; please confirm if custom lengths are required).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05\u003c\/strong\u003e: Connector and Cable-Type Option - Miniature coaxial ClickLoc connector with connector protector, standard cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eFeature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e173688-01-20-12-05\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMade in U.S.A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eProbe Tip Material\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePolyphenylene sulfide (PPS)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCase Material\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 303 or 304 Stainless Steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLinear Range\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2 mm (80 mils)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eScale Factor\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 to +177 Celsius\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePressure Sealing\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eViton O-ring for differential pressure\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eConnector Type\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eClickLoc Gold-plated Coaxial\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Weight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.3 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTechnical FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 173688-01-20-12-05 compatible with older 3300 Proximitor Sensors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the 3300 XL 8 mm probe is designed to be backwards compatible with non-XL 3300 series Proximitor Sensors. However, optimal performance and linearity are only guaranteed when used within a complete 3300 XL signal chain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I do if the probe tip is exposed to high-pressure environments?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe probe features a Viton O-ring designed to seal differential pressure. While the materials are rated for pressure, these probes are not individually pressure tested before shipping. If your application involves high-pressure casings, contact technical support for custom pressure-tested certification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the ClickLoc connector improve reliability in high-vibration areas?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc connector features a robust locking mechanism that prevents the coaxial connection from backing out due to machine vibration. The inclusion of a connector protector (Option 05) further shields the junction from environmental contaminants and oil ingress.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGap Voltage Calibration:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor standard vibration monitoring, ensure the probe is gapped to the center of its linear range. This typically corresponds to a \"Gap Voltage\" of -10.0 VDC (at -24 VDC supply) when using a 3300 XL Proximitor. Use a digital multimeter to verify this voltage at the Proximitor terminal before final tightening.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTarget Material Considerations:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe standard scale factor of 200 mV\/mil is calibrated for AISI 4140 steel. If the target shaft is made of a different alloy, the system must be recalibrated, or a scale factor correction must be applied in the monitoring software to avoid measurement errors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum Lead Bend Radius:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDuring installation, ensure the coaxial cable maintains a minimum bend radius of 25.4 mm (1.0 inch). Kinking or over-bending the cable can damage the internal shielding, leading to signal noise and intermittent \"Not OK\" status indications on the rack.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666567295339,"sku":"173688-01-20-12-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-173688-01-20-12-05-proximity-probes-v02njlvrsrx_12e65fb7-fd2d-43d1-8c48-5c219bbb2210.jpg?v=1765440765"},{"product_id":"bently-nevada-330102-00-96-05-02-05-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330102-00-96-05-02-05 3300 XL 8 mm Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330102-00-96-05-02-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3300 XL 8 mm proximity probe from\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003eBently Nevada\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eis designed for precision shaft vibration and position measurement in rotating machinery protection systems. The probe is widely used in turbines, compressors, pumps, generators, and large industrial motors operating in refinery, petrochemical, power generation, and mining environments where continuous condition monitoring is required to prevent mechanical failure and unplanned downtime.\u003c\/p\u003e\n\u003cp\u003eThis 8 mm proximity probe is part of the 3300 XL transducer system and provides stable non-contact measurement of shaft displacement and vibration. It supports high accuracy signal transmission through its miniature coaxial ClickLoc connector system and is engineered for long-term stability in electrically noisy industrial environments. The configuration includes CSA, ATEX, and IECEx approvals, making it suitable for hazardous area installations where compliance and operational reliability are mandatory.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eCode Segment\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330102\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Proximity Probe series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eUnthreaded length 0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e96\u003c\/td\u003e\n\u003ctd\u003eOverall case length 9.6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003eTotal cable length 0.5 m (1.6 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003eCSA, ATEX, IECEx approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMeasurement Design and System Configuration\u003c\/h3\u003e\n\u003cp\u003eThe 3300 XL 8 mm probe operates as part of a proximity transducer system that includes probe, extension cable, and proximitor sensor. It generates an eddy current-based signal used to measure shaft vibration, axial position, and radial displacement without physical contact.\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc connector system ensures stable electrical coupling and reduces installation errors during field replacement. The probe is designed for high resistance to oil contamination, humidity, vibration stress, and electromagnetic interference commonly present in turbine halls and compressor stations.\u003c\/p\u003e\n\u003cp\u003eIts standardized geometry allows integration into existing Bently Nevada 3300 XL monitoring systems without modification to signal conditioning hardware or calibration parameters.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330102-00-96-05-02-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Type\u003c\/td\u003e\n\u003ctd\u003eEddy current proximity transducer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Diameter\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eU.S.A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Case Length\u003c\/td\u003e\n\u003ctd\u003e9.6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e0.5 m (1.6 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approvals\u003c\/td\u003e\n\u003ctd\u003eCSA, ATEX, IECEx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 to +177 deg C (system dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-51 to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg (typical probe assembly)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive sensor, no power required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eTurbines, compressors, pumps, motors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 330102 probe compatible with existing 3300 XL systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The probe is fully compatible with Bently Nevada 3300 XL proximity transducer systems without requiring hardware modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the function of the ClickLoc connector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc connector provides secure locking, stable signal transmission, and reduced installation errors in field environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this probe be used in hazardous areas?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The unit carries CSA, ATEX, and IECEx approvals for use in certified hazardous industrial zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat machinery types typically use this probe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is commonly installed on turbines, compressors, pumps, generators, and other rotating equipment requiring continuous vibration monitoring.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation and Engineering Guidelines\u003c\/h3\u003e\n\u003cp\u003eInstall the probe using rigid mounting structures to ensure stable shaft alignment and accurate gap measurement. Avoid mounting on flexible or vibrating brackets that may distort signal output.\u003c\/p\u003e\n\u003cp\u003eMaintain correct probe gap calibration during commissioning using system-specific proximitor settings. Incorrect gap adjustment may result in unstable vibration readings or false alarm conditions.\u003c\/p\u003e\n\u003cp\u003eUse shielded extension cables and route wiring away from high-voltage motor cables and VFD outputs to minimize electromagnetic interference in the measurement circuit.\u003c\/p\u003e\n\u003cp\u003eFor high-temperature turbine applications, ensure proper thermal spacing and avoid direct exposure to radiant heat sources to preserve long-term probe stability and accuracy.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666638369131,"sku":"330102-00-96-05-02-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330102-00-96-05-02-05-3300-xl-8-mm-proximity-probes-2bwf3duvjqn_edb6ac17-f968-4c66-a4b4-5bb1f0b43e87.jpg?v=1765444515"},{"product_id":"bently-nevada-330103-17-22-10-12-05-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330103-17-22-10-12-05 3300 XL 8 mm Proximity Probe","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330103-17-22-10-12-05\u003c\/strong\u003e base model \u003cstrong\u003e330103\u003c\/strong\u003e is a non-contacting eddy-current sensor that generates a high-frequency electromagnetic field to convert physical distances into proportional electrical impedance shifts for static gap and dynamic vibration monitoring. This proximity probe interfaces directly with a matching 3300 XL Proximitor sensor to condition field measurements into a linear voltage output signal suitable for machine protection systems.\u003c\/p\u003e\n\u003ch3\u003eTechnical Summary\u003c\/h3\u003e\n\u003cp\u003eThe probe operates via eddy-current scaling principles where a high-frequency RF field emitted from the tip induces eddy currents when interacting with a conductive target. The proximity probe circuit experiences an impedance shift relative to the proximity of the target surface. The 3300 XL Proximitor sensor translates this continuous change into a linear voltage signal calibrated for rotor dynamics and shaft vibration analysis.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003e330103-17-22-10-12-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003eProximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003e\u003cstrong\u003eSeries\/Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003e-51 degC to +177 degC (-60 degF to +350 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003e\u003cstrong\u003eSignal Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003eLinear voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"8\"\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"8\"\u003e2.0 mm (80 mils), starting at approximately 0.25 mm (10 mils) from the probe tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"9\"\u003e\u003cstrong\u003eScale Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"9\"\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"10\"\u003e\u003cstrong\u003eMounting Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"10\"\u003eM10 x 1 metric thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Length Tuning:\u003c\/strong\u003e The 1.0 m total length of this probe requires an additional 4.0 m extension cable to achieve the standard 5.0 m system tuning requirement for precise Proximitor sensor calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTarget Material Calibration:\u003c\/strong\u003e Factory calibration is executed specifically for AISI 4140 steel. Alternative target materials alter eddy-current scaling and necessitate corrective variables or dedicated recalibration due to variations in magnetic permeability and electrical conductivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Target Dimensions:\u003c\/strong\u003e The observed target surface must present a continuous diameter of at least 15.2 mm (0.6 in) to mitigate edge effects that compromise measurement linearity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTightening Torque:\u003c\/strong\u003e Limit torque to a maximum of 4.7 N-m (42 in-lb) during thread installation into the machine casing to prevent mechanical deformation or structural failure of the probe tip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread and Side Clearance:\u003c\/strong\u003e Maintain a minimum lateral clearance of 22 mm from any surrounding counterbore or metallic sidewalls to eliminate parasitic calibration shifts and signal cross-talk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding and Insulation:\u003c\/strong\u003e Wrap the miniature coaxial ClickLoc connectors with the supplied silicone self-insulation tape. This isolates the coaxial shield grounding from the machine ground and prevents internal fluid ingress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing and Bend Radius:\u003c\/strong\u003e Route the fluid-resistant cable ensuring a minimum bend radius of 25.4 mm (1.0 in) to protect the internal dielectric layers from physical fatigue or fracturing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e17:\u003c\/strong\u003e 17 mm unthreaded length for depth positioning control inside the machine housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22:\u003c\/strong\u003e 22 mm overall case length providing low-profile dimensions for clearance constraint zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10:\u003c\/strong\u003e 1.0 m (3.3 ft) total cable length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12:\u003c\/strong\u003e Miniature coaxial ClickLoc connector with integrated fluid-resistant cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e05:\u003c\/strong\u003e ATEX, IECEx, and CSA intrinsic safety and non-incendive certifications for hazardous locations (Zone 0, Zone 1, and Zone 2 applications).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666638795115,"sku":"330103-17-22-10-12-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada330103-17-22-10-12-05-3300-xl-8-mm-probes-bxomorefi1r_31a372c1-6b96-4651-acf0-8817c6be8987.jpg?v=1765444523"},{"product_id":"bently-nevada-21000-28-05-00-057-04-02-proximity-probe-housing-assembly","title":"Bently Nevada 21000-28-05-00-057-04-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eSystem Description\u003c\/h3\u003e\n\u003cp\u003e\nThe \u003cstrong\u003e21000-28-05-00-057-04-02\u003c\/strong\u003e is a specialized industrial enclosure system designed to facilitate the external mounting and adjustment of proximity sensors. \nThis housing assembly is a critical component for Turbine Supervisory Instrumentation (TSI) in sectors such as power generation, oil and gas, and wastewater treatment. \nBy utilizing this assembly, engineers can install or replace proximity probes without the need to disassemble machine casings or halt production. \nThis hot-swappable capability is essential for high-availability assets such as centrifugal compressors and large motors, where minimizing downtime remains a primary operational objective. \nThe rugged construction ensures the internal probe remains protected from environmental contaminants while maintaining precise alignment for accurate vibration and axial position monitoring.\n\u003c\/p\u003e\n\n\u003ch3\u003eConfiguration Details\u003c\/h3\u003e\n\u003cp\u003e\nThe model code \u003cstrong\u003e21000-28-05-00-057-04-02\u003c\/strong\u003e defines a specific mechanical configuration optimized for hazardous area compliance and intermediate penetration:\n\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e28:\u003c\/strong\u003e Probe Option with Connector – Includes a 3300 XL 8 mm probe with multiple international agency approvals (ATEX, IECEx, CSA, etc.).\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003e05:\u003c\/strong\u003e Probe Cable Length Option – 0.5 meter (20 inches) lead length.\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003e00:\u003c\/strong\u003e Standoff Adapter – No standoff adapter included.\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003e057:\u003c\/strong\u003e Probe Penetration – Specifies a total penetration depth of 5.7 inches into the machine casing.\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003e04:\u003c\/strong\u003e Fittings Option – Equipped with one 3\/4-14 NPT plug only.\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003e02:\u003c\/strong\u003e Mounting Thread Option – Standard 3\/4-14 NPT threads for secure attachment to the machine housing.\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance Specifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFeature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e21000-28-05-00-057-04-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in U.S.A\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProbe Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm (High-Performance)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePenetration Depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e144.8 mm (5.7 inches)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHousing Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAnodized Aluminum with Stainless Steel Sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Thread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-51 to +177 °C (Probe Tip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHazardous Area Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMultiple Approvals (Option 28)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.0 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOperational Questions\u003c\/h3\u003e\n\n\u003cp\u003e\n\u003cstrong\u003eHow do I adjust the probe gap while using the 21000 series housing?\u003c\/strong\u003e\u003cbr\u003e\nAdjustment is performed by loosening the internal probe locking nut within the housing. \nYou can then thread the probe in or out while monitoring the DC Gap Voltage at the Proximitor sensor. \nOnce the target voltage (typically -10 VDC) is reached, the probe is locked in place, and the housing cover is secured.\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003cstrong\u003eWhat is the benefit of the Multiple Approvals (Option 28) probe?\u003c\/strong\u003e\u003cbr\u003e\nThe Option 28 probe is certified for use in various hazardous environments worldwide. \nThis simplifies global inventory management because a single part number complies with North American (CSA), European (ATEX), and international (IECEx) explosion-proof and intrinsic safety standards.\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003cstrong\u003eCan this housing be used in high-pressure applications?\u003c\/strong\u003e\u003cbr\u003e\nThe 21000 housing is designed to provide an environmental seal. \nHowever, for applications involving high differential pressures such as high-pressure steam turbines, it is recommended to verify the pressure ratings of the probe O-ring and the NPT mounting connection to ensure proper process containment.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Recommendations\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eGap Voltage Precision:\u003c\/strong\u003e During installation, always use a digital multimeter to set the gap voltage. \nFor a standard 3300 XL 8 mm system, the linear operating range is between -2 VDC and -18 VDC. \nSetting the gap to approximately -10 VDC ensures the probe remains centered within the measurement range.\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eThread Protection:\u003c\/strong\u003e Apply an anti-seize compound to the 3\/4-14 NPT mounting threads to prevent galling, especially when installing into stainless steel machine casings. \nEnsure the compound is compatible with the process environment such as oil, steam, or chemical exposure.\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eLead Cable Management:\u003c\/strong\u003e The 0.5-meter probe lead must be carefully coiled within the housing to prevent pinching when the cover is installed. \nEnsure the miniature coaxial ClickLoc connector is fully seated and protected from moisture using the provided seals.\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eExplosion-Proof Integrity:\u003c\/strong\u003e To maintain hazardous area certifications, confirm that all NPT fittings are tightened to the specified torque and that the housing cover is fully threaded and locked. \nAny structural modification will invalidate the safety approvals.\n\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666746831211,"sku":"21000-28-05-00-057-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-28-05-00-057-04-02-proximity-probe-housingassemblies-xvrpgxlvsv2_96bfffa0-3dcb-45f1-8bbd-5129634c1a1a.jpg?v=1765446963"},{"product_id":"bently-nevada-330101-00-28-10-02-cn-3300-xl-8-mm-proximity-probes-1","title":"Bently Nevada 330101-00-28-10-02-CN 3300 XL 8 mm Proximity Probes","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe 330101-00-28-10-02-CN is a 3300 XL 8 mm Proximity Probe manufactured by Bently Nevada, designed for high-performance vibration and position monitoring in critical rotating machinery. As part of the 3300 XL transducer system, this probe provides a linear output voltage proportional to the distance between the probe tip and the observed conductive target (typically a shaft). This specific configuration features a non-threaded 0.0-inch length with a 2.8-inch overall case length and a 1.0-meter total cable length. The \"CN\" suffix indicates compliance with country-specific agency approvals for hazardous area installations. These probes are fundamental components for the 3500 and 3300 Monitoring Systems, commonly applied in steam turbines, centrifugal compressors, and industrial pumps to detect radial vibration, axial thrust, and phase reference (Keyphasor) measurements.\u003c\/p\u003e\n\u003ch3\u003eTechnical Configuration\u003c\/h3\u003e\n\u003cp\u003eThe 3300 XL 8 mm system is engineered for interchangeability between probes, extension cables, and Proximitor sensors without requiring individual calibration.\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePolyphenylene sulfide (PPS) for chemical and thermal resistance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCase Material:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAISI 303 or 304 Stainless Steel (SST).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCable Construction:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e75\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"math-inline\"\u003e$\\Omega$\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eminiature coaxial cable with ClickLoc gold-plated connectors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental Sealing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDesigned to withstand high-pressure lubricants and moisture ingress at the probe-to-extension cable connection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330101-00-28-10-02-CN\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm Proximity Probe\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOverall Case Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.8 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.0 metre (3.3 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc™ connector\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eStandard cable\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eAgency Approval\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCN (Country Specific)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 deg C to +177 deg C (-60 deg F to +351 deg F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 mm (80 mils)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.323 Kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eU.S.A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eIndustrial procurement should reference the complete part number string to ensure physical compatibility with mounting brackets and extension cables.\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e330101-00-28-10-02-CN\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3300 XL Transducer System\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMandatory Complementary Parts:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRequires 3300 XL Extension Cable and 3300 XL Proximitor Sensor for a complete measurement loop.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cp\u003eSuccessful deployment of proximity probes requires strict adherence to mechanical clearances and electrical shielding protocols.\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCross-talk Prevention:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen installing multiple probes in a single bearing housing, maintain a minimum separation distance to prevent magnetic field interference (cross-talk) between probe tips.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTarget Material Calibration:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThese probes are calibrated for AISI 4140 steel targets. Using other materials (e.g., stainless steel or aluminum) will significantly alter the scale factor and linearity.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCable Protection:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUtilize flexible or rigid conduit to protect the coaxial cable from mechanical damage. Avoid tight bends; the minimum bend radius for standard 3300 XL cable is 25.4 mm (1.0 in).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnector Integrity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe ClickLoc connector must be clean and dry. Fingerprints or oil on the center pin can cause signal instability. It is recommended to use silicone connector protectors or heat-shrink tubing in oily environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 3300 XL 8 mm probe replace an older 3300 8 mm probe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the 3300 XL 8 mm system is backward compatible with non-XL 3300 8 mm components, though performance is optimized when using a full XL-series loop.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the \"CN\" approval specify?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \"CN\" suffix confirms the unit meets specific regional regulatory requirements for hazardous area electrical equipment, often involving Ex or intrinsic safety certifications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the \"Total Length\" calculated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1.0-meter length includes the probe lead and the integral cable. This must match the Proximitor sensor's calibrated length (typically 5.0m or 9.0m systems).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668297216363,"sku":"330101-00-28-10-02-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330101-00-28-10-02-cn-53ow4aqbs5v_e03081a3-40ff-4773-8d4b-75a8840667e9.jpg?v=1765520435"},{"product_id":"330101-00-15-10-02-cn-bently-nevada-3300-xl-8-mm-proximity-probes","title":"330101-00-15-10-02-CN | Bently Nevada | 3300 XL 8 mm Proximity Probes","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\n\u003cp\u003e\n    The \u003cstrong\u003eBently Nevada 330101-00-15-10-02-CN\u003c\/strong\u003e is a 3300 XL 8 mm eddy current proximity probe designed for Machinery Protection Systems (TSI). This non-contact sensor measures static gap and dynamic shaft vibration on rotating equipment.\n\u003c\/p\u003e\n\n\u003cp\u003e\n    The probe works with \u003cstrong\u003e3300 XL Proximitor Sensors\u003c\/strong\u003e and typically connects to \u003cstrong\u003eBently Nevada 3500\/40M\u003c\/strong\u003e or \u003cstrong\u003e3500\/42M\u003c\/strong\u003e monitoring modules. Common applications include radial vibration monitoring, axial thrust position measurement, keyphasor reference signals, and shaft eccentricity detection.\n\u003c\/p\u003e\n\n\u003cp\u003e\n    It is widely used on steam turbines, gas turbines, centrifugal compressors, pumps, and electric motors. This configuration includes a 3\/8-24 UNF English thread, 1.5-inch case length, 1.0-meter integrated cable, miniature coaxial ClickLoc connector, standard fluid-resistant cable, and -CN hazardous area approvals for China.\n\u003c\/p\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\n\u003cp\u003e\n    The following option codes define the exact configuration of the 330101-00-15-10-02-CN probe:\n\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct Number:\u003c\/strong\u003e 330101-00-15-10-02-CN\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUnthreaded Length Option (-00):\u003c\/strong\u003e 0.0 inches\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOverall Case Length Option (-15):\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTotal Length Option (-10):\u003c\/strong\u003e 1.0 meter (3.3 feet)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector and Cable Type (-02):\u003c\/strong\u003e Miniature coaxial ClickLoc connector with standard fluid-resistant cable\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAgency Approval Option (-CN):\u003c\/strong\u003e China hazardous area certification package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eParameter\u003c\/th\u003e\n            \u003cth\u003eSpecification\u003c\/th\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e330101-00-15-10-02-CN\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e8 mm Eddy Current Proximity Probe\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e3300 XL Transducer System\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e2.0 mm (80 mils), starting at approximately 0.25 mm (10 mils)\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eScale Factor (ASF)\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e7.87 V\/mm (200 mV\/mil) with 3300 XL Proximitor\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eInput Supply Voltage\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e-24 Vdc via Proximitor Sensor\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eSystem Total Length\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eCompatible with 5.0 m or 9.0 m system configurations\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e3\/8-24 UNF-2A English thread\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eProbe Tip Material\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eCase Material\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eAISI 303 or 304 stainless steel\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eGold-plated brass ClickLoc coaxial connector\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e-51°C to +177°C (-60°F to +350°F)\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eProtection Rating\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eIP68\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e0.323 kg\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e1.500 kg\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eUnited States\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eEngineering \u0026amp; Field Installation Notes\u003c\/h3\u003e\n\n\u003ch4\u003eMechanical Positioning \u0026amp; Target Calibration\u003c\/h4\u003e\n\n\u003col\u003e\n    \u003cli\u003e\n        \u003cstrong\u003eMechanical Clearance Check:\u003c\/strong\u003e Ensure the shaft target area is at least 15.2 mm (0.6 in) wide. Maintain a minimum 13 mm axial clearance from shoulders or counterbores.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n        \u003cstrong\u003eThread Engagement:\u003c\/strong\u003e Install the probe by hand into the mounting bracket or bearing housing. Do not rotate the probe while the extension cable is attached.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n        \u003cstrong\u003eElectrical Gap Verification:\u003c\/strong\u003e Connect the probe, extension cable, and 3300 XL Proximitor. Supply -24 Vdc and monitor voltage between \u003ccode\u003eOUT\u003c\/code\u003e and \u003ccode\u003eCOM\u003c\/code\u003e.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n        \u003cstrong\u003eSetting the Midpoint:\u003c\/strong\u003e Adjust the probe until the output reads \u003cstrong\u003e-10.0 Vdc\u003c\/strong\u003e. This equals approximately 1.27 mm (50 mils) gap.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n        \u003cstrong\u003eTorque Application:\u003c\/strong\u003e Tighten locknuts to 11.3 N·m (100 in·lb). Do not exceed 22.6 N·m (200 in·lb).\n    \u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch4\u003eShielding \u0026amp; Grounding Architecture\u003c\/h4\u003e\n\n\u003cul\u003e\n    \u003cli\u003e\n        \u003cstrong\u003eSingle-Point Grounding:\u003c\/strong\u003e Ground the cable shield at one location only, typically at the 3500 monitor rack I\/O module.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n        \u003cstrong\u003eIsolation:\u003c\/strong\u003e Keep the ClickLoc connector electrically isolated from machine ground. Use a connector protector sleeve to prevent moisture or oil contamination.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n        \u003cstrong\u003eConduit Separation:\u003c\/strong\u003e Route transducer cables separately from AC power cables, VFD outputs, and switching control wiring.\n    \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eField Troubleshooting \u0026amp; Lifecycle Guidance\u003c\/h3\u003e\n\n\u003ch4\u003eSystem Diagnostics via DC Voltage\u003c\/h4\u003e\n\n\u003cp\u003e\n    Measure voltage between the Proximitor \u003ccode\u003eOUT\u003c\/code\u003e and \u003ccode\u003eCOM\u003c\/code\u003e terminals to diagnose system conditions:\n\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e\n        \u003cstrong\u003e-0.1 Vdc to -1.0 Vdc:\u003c\/strong\u003e Probe shorted to target or grounded connector.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n        \u003cstrong\u003e-10.0 Vdc:\u003c\/strong\u003e Normal mid-range operating condition.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n        \u003cstrong\u003e-17.5 Vdc to -26.0 Vdc:\u003c\/strong\u003e Open circuit condition caused by damaged cable, loose connector, or failed probe tip coil.\n    \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCounterfeit \u0026amp; Version Verification\u003c\/h3\u003e\n\n\u003cp\u003e\n    The \u003cstrong\u003e330101-00-15-10-02-CN\u003c\/strong\u003e uses a purple cable jacket that identifies the 3300 XL 8 mm series. Matching extension cables and Proximitor sensors should also use purple labels or boots.\n\u003c\/p\u003e\n\n\u003cp\u003e\n    Mixing 3300 XL 8 mm components with 5 mm, 11 mm, or older 7200 series hardware causes calibration and linearity errors. Genuine probes include laser-etched part numbers on the stainless steel body and a tracking label near the connector.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical FAQ\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e\n        \u003cstrong\u003eCan the 1.0-meter probe cable connect directly to a Proximitor sensor?\u003c\/strong\u003e\u003cbr\u003e\n        No. The total electrical system length must match the Proximitor calibration. A 1.0-meter probe requires an extension cable to complete a 5.0-meter or 9.0-meter system.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n        \u003cstrong\u003eWhat does the \"-CN\" suffix mean?\u003c\/strong\u003e\u003cbr\u003e\n        The -CN suffix indicates China hazardous area approvals, including applicable NEPSI and related certification documentation.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n        \u003cstrong\u003eWhat happens if the probe locknut is over-tightened?\u003c\/strong\u003e\u003cbr\u003e\n        Excessive torque can deform the probe casing, damage the internal coil, or create intermittent open-circuit faults during machine thermal expansion.\n    \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668303442283,"sku":"330101-00-15-10-02-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330101-00-15-10-02-CN-mrtvynxcvkd_bc42af4b-0429-484c-8c7e-3c9cc30eb80b.jpg?v=1765520618"},{"product_id":"bently-nevada-330192-10-80-90-cn-3300-xl-8-mm-extended-temperature-range-etr-proximity-probes","title":"Bently Nevada 330192-10-80-90-CN 3300 XL 8 mm Extended Temperature Range (ETR) Proximity Probes","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e330192-10-80-90-CN\u003c\/strong\u003e is an Extended Temperature Range (ETR) Proximity Probe belonging to the Bently Nevada 3300 XL 8 mm series. This transducer is engineered for vibration and position measurements in environments where standard probes exceed their thermal limits. The ETR version utilizes perfluoroalkoxy (PFA) insulated triaxial cabling to maintain signal integrity under high thermal stress. This specific configuration features a 1.0-inch unthreaded length, an 8.0-inch overall case length, and a 9.0-meter total cable length. It is primarily utilized within the 3500 and 3300 Machinery Protection Systems (TSI) for monitoring steam turbines, gas turbines, and large industrial compressors. The \"CN\" designation indicates compliance with country-specific agency approvals for hazardous area installations.\u003c\/p\u003e\n\u003ch3\u003eTechnical Configuration\u003c\/h3\u003e\n\u003cp\u003eThe 3300 XL ETR probe system provides a linear output voltage proportional to the gap between the probe tip and the target shaft.\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eThermal Resilience:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRated for extended temperatures beyond standard 3300 XL specifications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProbe Tip:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConstructed from Polyphenylene sulfide (PPS) for high chemical and thermal stability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCabling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e75 ohm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003etriaxial PFA insulated cable designed to reduce parasitic capacitance and environmental interference.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3\/8-24 threaded body with a 1.0-inch unthreaded section for precise gap adjustment in deep-reach machine housings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330192-10-80-90-CN\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eExtended Temperature Range (ETR) Proximity Probe\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.0 inches\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOverall Case Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8.0 inches\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e9.0 metres (29.5 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCable Insulation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePerfluoroalkoxy (PFA)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProbe Tip Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePolyphenylene sulfide (PPS)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCase Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 303 or 304 Stainless Steel (SST)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eAgency Approval\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCN (Country Specific)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSystem Compatibility\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL Proximitor Sensor \u0026amp; 3500\/3300 TSI\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.323 Kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eU.S.A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eAccurate identification of the dash options is critical for ensuring the probe reaches the target surface through the machine casing.\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Number:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e330192\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eOption 10:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.0 in Unthreaded Length\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eOption 80:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e8.0 in Overall Case Length\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eOption 90:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e9.0 m Total Length\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eOption CN:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCountry Specific Approvals\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cp\u003ePrecision installation is mandatory to ensure the E-E-A-T reliability of the Machinery Protection System.\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGap Setting:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProbes must be gapped using a digital voltmeter at the Proximitor output. The standard linear range typically centers at -10.0 Vdc for a 4140 steel target.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Clearances:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEnsure the probe tip has a minimum side clearance of two probe tip diameters from any adjacent metal to avoid side-viewing interference.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTemperature Gradient:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhile the ETR probe is rated for high temperatures, the connection between the probe lead and the extension cable should be located in a lower-temperature zone if possible, or protected with high-temperature connector protectors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHandling Precautions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePFA insulated cables are more susceptible to kinking than standard coaxial cables. Maintain a minimum bend radius of 25.4 mm (1.0 in) to prevent internal conductor damage.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSignal Noise:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEnsure the triaxial shield is properly grounded at the Proximitor Sensor end only. Avoid multiple ground points to prevent ground loops in the TSI rack.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIs this ETR probe compatible with standard 3300 XL extension cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ETR probe requires a specific 3300 XL ETR extension cable to ensure the system remains within its technical temperature and electrical specifications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the impact of using the \"CN\" approval option?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \"CN\" option ensures the hardware meets specific national standards for explosive atmospheres; check the Field Notification Letter in the Bently Nevada technical library for regional specifics.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCan this probe be used for Keyphasor applications?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the 3300 XL 8 mm ETR probe is suitable for phase reference (Keyphasor) signals provided the target notch meets the minimum depth and width requirements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668311601515,"sku":"330192-10-80-90-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330192-10-80-90-CN-yba5j0pxtz2_936aab37-1070-4389-8470-9fd09a7eaf73.jpg?v=1765520866"},{"product_id":"bently-nevada-21000-28-05-00-040-03-02-proximity-probe-housing-assemblies","title":"Bently Nevada 21000-28-05-00-040-03-02 Proximity Probe Housing Assemblies","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e21000-28-05-00-040-03-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a Bently Nevada proximity probe housing assembly designed for harsh industrial environments such as power plants, oil refineries, and rotating machinery systems. This assembly protects proximity probes and ensures stable signal transmission under vibration, temperature variation, and contamination exposure. It plays a critical role in vibration monitoring systems by maintaining probe alignment and shielding sensitive components. Engineers rely on this housing to reduce signal noise and prevent premature probe failure. Its robust construction supports continuous operation, helping maintenance teams minimize unplanned downtime and extend asset lifecycle.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe model code defines the exact configuration of the housing assembly:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e28\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= 3300 XL 8 mm probe with multiple approvals\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= 0.5 metre probe cable length\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= No standoff adapter included\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e040\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= 4.0 inch probe penetration depth\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e03\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= Fittings kit includes one 3\/4-14 NPT plug, one reducer, and cable seal grip with multiple grommets\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= 3\/4-14 NPT mounting thread\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis structured coding ensures precise selection for specific installation requirements.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e21000-28-05-00-040-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard industrial housing form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to 100 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot applicable (passive mechanical component)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum body with 304 stainless steel sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTechnical FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this model still in production?\u003c\/strong\u003e\u003cbr\u003eNo. Bently Nevada replaced it with 21000-16-05-00-040-03-02, which offers updated compliance and improved availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this housing with other probe types?\u003c\/strong\u003e\u003cbr\u003eIt supports 3300 XL 8 mm probes. Verify compatibility before using other probe series.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the main installation risk?\u003c\/strong\u003e\u003cbr\u003eImproper sealing or incorrect thread engagement may cause moisture ingress and signal instability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require power input?\u003c\/strong\u003e\u003cbr\u003eNo. This assembly is a passive mechanical protection component.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cp\u003eEnsure proper thread sealing using industrial-grade thread sealant to prevent oil or moisture leakage.\u003cbr\u003eMaintain correct probe gap voltage during installation to avoid signal distortion.\u003cbr\u003eUse appropriate torque when tightening fittings to avoid thread damage or deformation under vibration.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668311634283,"sku":"21000-28-05-00-040-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/21000-28-05-00-040-03-02-mth4yhefy2a_38195589-1207-44b4-955f-dcc1451f5bb0.jpg?v=1765520867"},{"product_id":"bently-nevada-330101-00-11-10-02-cn-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330101-00-11-10-02-CN 3300 XL 8 mm Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330101-00-11-10-02-CN\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a commercial-grade, non-contacting eddy current displacement sensor engineered for the foundational\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 3300 XL\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProximity Transducer System. Operating as a critical component within machinery protection infrastructures, this 8 mm probe precisely gauges static and dynamic distances between the sensor tip and the observed rotating shaft. Heavy automated industrial application environments—including oil and gas refineries, baseload thermal power stations, and large-scale wastewater processing plants—rely on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330101-00-11-10-02-CN\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto provide consistent mechanical telemetry. By tracking microscopic shaft vibration, axial thrust position shifts, and radial oil film clearances, it delivers continuous analog metrics directly to the 3500 monitoring rack. This real-time feedback allows operators to initiate defensive safety trips before unbalance or bearing wiping occurs, mitigating catastrophic asset damage and dramatically reducing unprogrammed plant downtime.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe exact physical attributes, thread configuration, extension length, and regulatory safety ratings of the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330101-00-11-10-02-CN\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esensor are specified via a structured part number matrix:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330101 (Base Platform):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEstablishes the standard 3300 XL 8 mm proximity probe configuration with 3\/8-24 UNF English case threading and an unarmored coaxial cable lead.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00 (Unthreaded Segment):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDefines an unthreaded length of 0.0 inches, meaning the entire metal outer casing features continuous 3\/8-24 UNF threading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e11 (Overall Case Length):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSpecifies a short overall case length of 1.1 inches, tailored for tight mechanical spaces and shallow radial bearing housings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e10 (Total Length Profile):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDesignates a total system electrical length of 1.0 meter (3.3 feet), requiring precise integration with matching extension cables and Proximitor drivers.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02 (Connector Style):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOutfits the standard insulation coaxial lead with a miniature coaxial ClickLoc locking connector interface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCN (Regional Certification):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFlags country-specific hazardous area agency approvals, matching strict localized safety standards for explosive environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOperational Benchmarks \u0026amp; Physical Dimensions\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eHardware Metric\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCertified Industrial Standard Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel Identity\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330101-00-11-10-02-CN\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand Manufacturer\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada (Baker Hughes)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eControl System Line\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL Proximity Transducer Series\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSensor Tip Diameter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8 mm Nominal Profile Base\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCasing Thread Pitch\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/8-24 UNF Thread Pattern\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePhysical Cable Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.0 meter (3.3 feet) Total Lead\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnection Mechanism\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature Coaxial ClickLoc Locking Interlock\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eExcitation Source\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eDriven directly via matching 3300 XL Proximitor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSystem Signal Output\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eLinear Voltage Proportional to Target Gap\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eNet Component Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.323 kg Net Mass Base\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eGross Shipping Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.50 kg Packed Transport Base\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 to +177 deg C Ambient Thermal Envelope\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eManufacturing Origin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMinden, Nevada, USA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMachine Telemetry \u0026amp; Maintenance FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the practical installation logic behind the 1.0-meter total length configuration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProximity monitoring loops depend on precise high-frequency impedance tracking calibrated to a fixed total electrical length, usually 5.0 meters or 9.0 meters. The 1.0-meter probe is engineered to match with a corresponding 4.0-meter or 8.0-meter 3300 XL extension cable, allowing the field technician to reach a remote termination junction box outside the machine casing while maintaining the proper electrical length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does this model incorporate the continuous 1.1-inch threaded casing configuration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 00-11 suffix combination means the probe has zero unthreaded length and a brief 1.1-inch total metal body. This ultra-compact profile is ideal for internally mounted brackets or shallow radial bearing caps where a longer housing would strike internal structural obstructions or interfere with the target shaft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the ClickLoc connector help preserve signal path integrity under high-vibration stresses?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The miniature coaxial ClickLoc connector integrates an automated mechanical locking detent that prevents accidental loose connections. Once fully joined, it blocks connection backing caused by low-frequency machine housing vibration, keeping the low-voltage telemetry path continuous and error-free.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDC Voltage Calibration and Physical Gap Optimization:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen threading the 330101-00-11-10-02-CN probe into the mounting bracket, verify the sensor face is parallel to the target. Connect a digital multimeter to the Proximitor sensor output loop and adjust the probe position until the voltage reads exactly -10.0 VDC. This reading indicates that the target sits at the true physical center of the 3300 XL 8 mm linear measurement field. Ensure the target surface area provides a smooth, homogeneous AISI 4140 steel face to prevent electrical runout anomalies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConduit Pulling Mechanics and Cable Bend Radius:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen routing the unarmored coaxial cable lead through internal machine pathways or external conduit blocks, maintain a strict minimum bend radius of 25.4 mm (1.0 inch). Never apply excessive pulling tension near the probe body junction or terminal plug, as high force can displace the internal center conductor. Use appropriate anti-seize compound on the 3\/8-24 UNF threads and torque to standard specifications without over-tightening to avoid casing distortion.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnector Isolation and Liquid-Tight Sealing Protection:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc coaxial joint must remain completely dry, free of conductive film, and isolated from structural cabinet grounds. Wrap the joined terminal securely using high-grade self-fusing silicone insulation tape or encase it within a specialized connector protector sleeve. This treatment blocks hot synthetic lubricants, atmospheric moisture, and metallic dust from penetrating the terminal threads, preventing ground loop errors or calibration drift.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668313043307,"sku":"330101-00-11-10-02-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330101-00-11-10-02-cn-b4nxd0q3tgo_39b9aa05-9bda-4baa-9142-0bac81911639.jpg?v=1765520917"},{"product_id":"330101-00-30-50-02-cn-bently-nevada-3300-xl-8-mm-proximity-probes","title":"330101-00-30-50-02-CN | Bently Nevada | 3300 XL 8 mm Proximity Probes","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e330101-00-30-50-02-CN\u003c\/strong\u003e non-contacting transducer element provides precise, static and dynamic proximity data for critical rotating machinery. Designed for mounting within machinery housings, this proximity probe uses eddy current principles to generate an output voltage directly proportional to the physical gap between the probe tip and an observed conductive target surface. The device interfaces seamlessly with plant-wide monitoring instrumentation to track parameters such as radial vibration, axial position, speed, and Keyphasor references on fluid-film bearing machines.\u003c\/p\u003e\n\u003cp\u003eConstructed with a rugged stainless steel case and a high-strength polyphenylene sulfide tip, the unit operates reliably under extreme conditions including high temperatures and mechanical stress. It incorporates specialized mechanical bonding and advanced strain relief to withstand harsh industrial environments, ensuring consistent measurement integrity and long-term durability without the need for periodic re-calibration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolded Tip Fusion:\u003c\/strong\u003e Employs a patented TipLoc molding method that produces an exceptionally robust bond between the polyphenylene sulfide probe tip and the steel body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Strength Cable Connection:\u003c\/strong\u003e Incorporates a patented CableLoc design providing a robust 330 N (75 lbf) pull strength to ensure secure attachment from the probe body to the integrated lead cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-Tightening Coaxial Connector:\u003c\/strong\u003e Features a corrosion-resistant, gold-plated ClickLoc miniature coaxial interface that locks into position with a distinct mechanical click, preventing loosening from machine vibrations without requiring specialized tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull System Interchangeability:\u003c\/strong\u003e Fully complies with American Petroleum Institute (API) 670 standards for mechanical configuration, linear range, and accuracy, allowing components to be replaced without re-calibrating the entire monitor loop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackward Compatibility:\u003c\/strong\u003e Operates interchangeably with non-XL 3300 series 5 mm and 8 mm proximity transducer system elements, ensuring versatile integration into existing plant monitoring networks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFluid-film bearing industrial machines\u003c\/li\u003e\n\u003cli\u003eRadial vibration monitoring on rotating shafts\u003c\/li\u003e\n\u003cli\u003eAxial shaft position tracking\u003c\/li\u003e\n\u003cli\u003eKeyphasor reference measurements\u003c\/li\u003e\n\u003cli\u003eSpeed and overspeed sensing on high-speed industrial turbines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eModel \/ Suffix Code\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eOption Selection\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSelection Description\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330101\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eProduct Model\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Proximity Probe, 3\/8-24 UNF thread, without armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnthreaded Length Option\u003c\/td\u003e\n\u003ctd\u003e0.0 in unthreaded length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-30\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall Case Length Option\u003c\/td\u003e\n\u003ctd\u003e3.0 in overall case length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-50\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTotal Length Option\u003c\/td\u003e\n\u003ctd\u003e5.0 meters (16.4 feet) total system length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-02\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConnector and Cable Option\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-CN\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAgency Approval Option\u003c\/td\u003e\n\u003ctd\u003eCountry-specific safety approval for China (GB\/Ex certifications)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter Category\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification Details\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.0 mm (80 mils), beginning at approximately 0.25 mm (10 mils) from the target surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncremental Scale Factor (ISF)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil) ±5% typical over the linear range when measured against an AISI 4140 steel target\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended Gap Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-9 Vdc at approximately 1.27 mm (50 mils) gap setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLinear Output Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApproximately -1 Vdc to -17 Vdc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProbe DC Resistance (R_PROBE)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.73 ohms ±0.50 ohms (between center conductor and outer conductor for a 5.0 meter system)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem Low-Frequency Cutoff\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlat response from 0 Hz (DC) up to 10 kHz; +0, -3 dB attenuation with up to 305 meters of field wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTarget Size Limits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15.2 mm (0.6 in) minimum diameter flat target surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShaft Diameter Limits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e76.2 mm (3 in) recommended minimum; 50.8 mm (2 in) absolute minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Rated Case Torque\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11.2 N-m (100 in-lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended Case Torque\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.5 N-m (66 in-lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProbe Tip Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProbe Case Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAISI 303 or 304 Stainless Steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIntegrated Cable Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e75 ohm triaxial, fluoroethylene propylene (FEP) insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGold-plated brass or gold-plated beryllium copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Connector Torque\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.565 N-m (5 in-lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating and Storage Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-52 degC to +177 degC (-62 degF to +350 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProbe Pressure Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDesigned to seal differential pressure between probe tip and case via internal Viton O-ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (A Baker Hughes Company)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnited States of America\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal System Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.7 kg (1.5 lbm) typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProbe Casing Thread Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/8-24 UNF-2A thread configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eConnections\/Interfaces\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eConnector Pin\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMiniature Male Coaxial Plug\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-frequency ClickLoc gold-plated link to 3300 XL extension cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal Coaxial Center Conductor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCarries RF drive current and dynamic gap signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal Coaxial Outer Shield\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eServes as the signal common return path and electrical shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Engagement Boundaries:\u003c\/strong\u003e Strictly observe the maximum thread engagement limit of 0.563 inches for 3\/8-24 UNF configurations. Exceeding this boundary can lead to mechanical binding and casing damage during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Bend Radius Restrictions:\u003c\/strong\u003e Maintain a minimum cable bend radius of 25.4 mm (1.0 inch) along all FEP cable runs to prevent micro-fractures in the internal conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Tightening Method:\u003c\/strong\u003e Connect the miniature coaxial plug to the extension cable finger-tight only until a distinct mechanical click is heard. Do not apply mechanical tools or pliers to the gold-plated ClickLoc joints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Gap Optimization:\u003c\/strong\u003e Set the physical probe gap distance using an electrical voltmeter connected to the sensor output. Adjust the mechanical position until the DC voltage reads approximately -9 Vdc, which corresponds to the mid-point of the linear measurement window.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture Protection Action:\u003c\/strong\u003e Protect all external cable-to-cable connections using a dedicated connector protector kit or silicone self-fusing tape to mitigate fluid entry and prevent environmental degradation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFCC Rules:\u003c\/strong\u003e Compliant with Part 15 of FCC interference rules\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEuropean Directives:\u003c\/strong\u003e EMC Directive 2014\/30\/EU, RoHS Directive 2011\/65\/EU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial EMC Standards:\u003c\/strong\u003e EN 61000-6-2 (Industrial Immunity), EN 61000-6-4 (Industrial Emissions)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChina RoHS:\u003c\/strong\u003e 15-Year Environment Friendly Use Period (EFUP) specification under standard SJ\/T 11364-2024\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHazardous Area Standards:\u003c\/strong\u003e GB\/Ex certified for hazardous environments under suffix option -CN\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if the internal probe thread engagement exceeds the nominal limits?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eExceeding the maximum recommended 0.563 inches of thread depth can create physical binding during installation. This mechanical stress can score the casing or permanently jam the assembly into the bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it necessary to use tools to secure the miniature coaxial cable joint?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe gold-plated ClickLoc connectors are specifically designed for hand-tight installation. You must tighten them finger-tight until you hear a mechanical click, as using pliers or tools can distort the contact boundaries.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the baseline electrical resistance signature of this probe module?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor this specific 5.0 meter configuration, the nominal direct current resistance between the inner center conductor and the outer conductor shield is 8.73 ohms ±0.50 ohms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this probe be paired with an 11-meter proximity sensor system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, this 5-meter total length probe option is calibrated and designed exclusively for use with a 5.0 meter Proximitor sensor loop to maintain proper system accuracy and impedance matching.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668314583403,"sku":"330101-00-30-50-02-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330101-00-30-50-02-cn-zthejsuapcd_d55b5f2a-742d-4b4e-ac05-739d4d3c2e85.jpg?v=1765520970"},{"product_id":"bently-nevada-330193-00-04-05-00-3300-xl-8-mm-extended-temperature-range-etr-proximity-probe","title":"Bently Nevada 330193-00-04-05-00 3300 XL 8 mm Extended Temperature Range (ETR) Proximity Probe","description":"\u003ch3 class=\"\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cspan class=\"\"\u003eThe Bently Nevada\u003cstrong\u003e 330193-00-04-05-00 \u003c\/strong\u003eis a specialized 8 mm eddy current proximity probe part of the 3300 XL Extended Temperature Range (ETR) series.\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eThis transducer is engineered for non-contacting displacement and vibration measurements in extreme thermal environments,\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eproviding a significantly higher temperature rating than standard proximity probes.\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eIt is primarily utilized in the monitoring of gas turbines,\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003esteam turbines,\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eand other high-heat rotating machinery where standard sensors would fail.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"\"\u003eThis configuration features an M10 x 1 metric thread with a 40 mm overall case length and no unthreaded portion.\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eThe assembly includes a 0.\u003c\/span\u003e\u003cspan class=\"\"\u003e5-metre (1.\u003c\/span\u003e\u003cspan class=\"\"\u003e6 feet) integral cable.\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eWhen used as part of a complete 3300 XL ETR Transducer System,\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eit maintains a stable linear scale factor of 7.\u003c\/span\u003e\u003cspan class=\"\"\u003e87 V\/mm (200 mV\/mil) across its operating range,\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eensuring accurate machinery protection data for radial vibration and axial position monitoring.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"\"\u003eTechnical Configuration\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330193-00-04-05-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8 mm ETR Proximity Probe\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eM10 x 1\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOverall Case Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e40 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal Cable Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.5 Metre (1.6 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc™\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eArmor Option\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eWithout Armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eAgency Approval\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e00 (Not required)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-35°C to +260°C (-31°F to +500°F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 mm (80 mils)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMade in U.S.A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.5 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"\"\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003e\u003cspan class=\"\"\u003eAccurate configuration is critical for mechanical fit and electrical loop matching.\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eThe 330193-00-04-05-00 part number is defined by the following suffix options:\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eOption Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e330193\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm ETR Probe, M10 x 1 thread, without armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnthreaded Length: 0 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-04\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOverall Case Length: 40 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-05\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eTotal Length: 0.5 metre (1.6 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAgency Approval: Not required\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"\"\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong class=\"\"\u003eThermal Performance Management:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"\"\u003eThe Extended Temperature Range (ETR) series is designed to withstand continuous exposure up to 260°C (500°F).\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eDuring installation,\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003etechnical personnel must account for the thermal growth of the machine casing and rotor.\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eThe DC gap voltage set at ambient temperature will shift as the machine reaches operating temperature; refer to the 3300 XL ETR datasheet for temperature-dependent voltage compensation curves.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong class=\"\"\u003eMechanical Mounting:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"\"\u003eFor M10 x 1 metric threads,\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003ethe maximum recommended mounting torque is 6.\u003c\/span\u003e\u003cspan class=\"\"\u003e8 N·m (60 in·lb).\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eTo maintain the calibrated linear range and avoid \"side-view\" interference,\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eensure a minimum side clearance of 13 mm (0.\u003c\/span\u003e\u003cspan class=\"\"\u003e5 in) from surrounding metallic surfaces.\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eThe probe tip must be centered on the observed shaft target area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong class=\"\"\u003eLoop Calibration and Cables:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"\"\u003eThis 0.\u003c\/span\u003e\u003cspan class=\"\"\u003e5-metre probe is designed to be paired with a 3300 XL ETR extension cable.\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eThe total system length (typically 5.\u003c\/span\u003e\u003cspan class=\"\"\u003e0 or 9.\u003c\/span\u003e\u003cspan class=\"\"\u003e0 metres) must match the calibration of the Proximitor sensor.\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eUsing a standard (non-ETR) extension cable or a mismatched total length will result in significant scale factor errors and invalid machinery protection data.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong class=\"\"\u003eShielding and Noise Mitigation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"\"\u003eMaintain strict separation between probe cables and high-voltage AC power lines.\u003c\/span\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eThe coaxial cable shield should be grounded only at the monitor\/Proximitor end to prevent ground loops.\u003c\/span\u003e\u003cspan\u003e In high-EMI environments typical of turbine halls,\u003c\/span\u003e\u003cspan\u003e ensure all connections are tight and housed in grounded terminal boxes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eMaintenance \u0026amp; Troubleshooting FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use a standard 3300 XL Proximitor with this ETR probe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA:\u003c\/span\u003e\u003cspan\u003e Yes,\u003c\/span\u003e\u003cspan\u003e the 3300 XL Proximitor is compatible with both standard and ETR probes,\u003c\/span\u003e\u003cspan\u003e provided the total loop length (5m or 9m) and target material (AISI 4140) match.\u003c\/span\u003e\u003cspan\u003e However,\u003c\/span\u003e\u003cspan\u003e the extension cable must also be an ETR variant to withstand the high-temperature zone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What indicates a failure due to excessive heat?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA:\u003c\/span\u003e\u003cspan\u003e Thermal failure often manifests as a significant drift in the DC gap voltage that does not correlate with actual shaft movement,\u003c\/span\u003e\u003cspan\u003e or a \"Not OK\" status on the monitor when the machine is at full temperature that clears once the machine cools.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I clean the ClickLoc™ connector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA:\u003c\/span\u003e\u003cspan\u003e Use only approved electronics-grade contact cleaner.\u003c\/span\u003e\u003cspan\u003e Ensure the connector is completely dry before reassembly.\u003c\/span\u003e\u003cspan\u003e In oil-mist environments,\u003c\/span\u003e\u003cspan\u003e always use connector protectors or self-fusing silicone tape to prevent lubricant ingress.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is the unthreaded length (00) important?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA:\u003c\/span\u003e\u003cspan\u003e The unthreaded length determines how much of the probe body can pass through a mounting bracket or sleeve without being restricted by the threads.\u003c\/span\u003e\u003cspan\u003e A \"00\" option means the entire 40mm case is threaded.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668317499755,"sku":"330193-00-04-05-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330193-00-04-05-00-nxxhjj4bsj1_7399c46f-de56-42cb-98d1-f9bbea42ea0a.jpg?v=1765521071"},{"product_id":"bently-nevada-330709-000-060-10-02-00-3300-xl-11-mm-proximity-probe","title":"Bently Nevada 330709-000-060-10-02-00 3300 XL 11 mm Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cspan class=\"citation-96 citation-end-96\"\u003eThe Bently Nevada\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330709-000-060-10-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a high-performance 11 mm eddy current proximity probe, part of the 3300 XL 11 mm Transducer System.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThis system is specifically designed for applications requiring a wider linear range than standard 8 mm probes, typically used for measuring axial thrust position or radial vibration on larger shafts where greater displacement is expected.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"citation-95 citation-end-95\"\u003eThis model features an M16 x 1.5 metric thread and a 60 mm overall case length.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"citation-94 citation-end-94\"\u003eIt is configured without stainless steel armor and includes a 1.0-metre (3.3 feet) integral cable.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThe 11 mm system provides an extended linear range of 4.0 mm (160 mils), offering a standard scale factor of 3.94 V\/mm (100 mV\/mil) when paired with a matched 3300 XL 11 mm Proximitor sensor and extension cable.\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"citation-93 citation-end-93\"\u003eIt is widely used in steam turbines, large compressors, and hydro-turbines for critical machinery protection.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eTechnical Configuration\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330709-000-060-10-02-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e11 mm Proximity Probe\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eM16 x 1.5\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOverall Case Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e60 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal Cable Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.0 Metre (3.3 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eArmor Option\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eWithout Armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eAgency Approval\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNot Required\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e4.0 mm (160 mils)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-35°C to +177°C (-31°F to +350°F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMade in U.S.A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3.0 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eThis part number is generated based on specific mechanical and electrical requirements. Verify all suffix codes before procurement to ensure system compatibility.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eOption Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e330709\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 11 mm Probe, M16 x 1.5 thread, without armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-000\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnthreaded Length: 0 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-060\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOverall Case Length: 60 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-10\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eTotal Length: 1.0 Metre (3.3 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-02\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAgency Approval: Not required\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eExtended Linear Range:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 11 mm probe offers double the linear range of a standard 8 mm probe. This makes it ideal for axial position (thrust) measurements where shaft movement can exceed 2 mm. Ensure the target area on the shaft is at least 30.5 mm (1.2 in) in diameter to maintain the calibrated scale factor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Clearances:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to the larger tip diameter, the 11 mm probe requires greater side clearance to prevent \"side-view\" interference from neighboring metallic surfaces. A minimum of 25.4 mm (1.0 in) clearance around the probe tip is required. For M16 x 1.5 threads, the recommended mounting torque is 24.5 N·m (18 lb·ft).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Loop Matching:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3300 XL 11 mm probe is part of a tuned circuit. This 1.0-metre probe must be used with a 3300 XL 11 mm extension cable to achieve a total length of 5.0 or 9.0 metres, matching the calibration of the Proximitor sensor. Mixing 11 mm components with 8 mm or 5 mm components will result in total system failure or massive measurement errors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eField Wiring \u0026amp; Protection:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc connector is designed for secure attachment but must be protected from oil and moisture. Use of connector protectors or oil-resistant heat-shrink tubing is strongly recommended in bearing housing environments. Ensure the coaxial cable is not routed parallel to high-voltage AC power lines to avoid electromagnetic interference (EMI).\u003c\/p\u003e\n\u003ch3\u003eMaintenance \u0026amp; Troubleshooting FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use an 11 mm probe with an 8 mm Proximitor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: No. The 11 mm system has a different scale factor (100 mV\/mil) compared to the 8 mm system (200 mV\/mil). They are electrically incompatible and will not provide accurate data.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the nominal DC gap voltage for the 11 mm system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: For a 3300 XL 11 mm system, the center of the linear range is typically reached at -10.0 Vdc. Adjust the mechanical gap during installation until the Proximitor output reaches this value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What should I do if the \"OK\" light on the monitor is off?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Check the continuity of the probe and extension cable. Ensure the ClickLoc connector is dry and properly seated. A \"Not OK\" status usually indicates a short circuit or an open circuit in the transducer loop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does target material affect the 11 mm probe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Yes.\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"citation-92 citation-end-92\"\u003eLike all Bently Nevada proximity probes, the 11 mm version is factory calibrated for AISI 4140 steel.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eIf the target is a different alloy, the scale factor must be adjusted in the monitoring system configuration.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668317761899,"sku":"330709-000-060-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330709-000-060-10-02-00-fbrmpagorxe_cb0a88ae-2588-479b-bd96-2a55b2f8fad7.jpg?v=1765521080"},{"product_id":"bently-nevada-146054-032-10-02-cn-3300-xl-ceramic-capped-proximity-probe","title":"Bently Nevada 146054-032-10-02-CN 3300 XL Ceramic Capped Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e146054-032-10-02-CN\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3300 XL Ceramic Capped Proximity Probe from\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003eBently Nevada\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eis a high stability eddy current sensor designed for precise shaft vibration and axial position measurement in rotating machinery systems. It is commonly deployed in turbines, compressors, pumps, and generators operating in refinery, petrochemical, offshore, and power generation environments where continuous condition monitoring is required to prevent unplanned shutdowns.\u003c\/p\u003e\n\u003cp\u003eThe ceramic capped probe design improves thermal stability and wear resistance at the sensing tip, ensuring consistent signal linearity under harsh industrial conditions. With a 1.0 meter total length configuration and ClickLoc miniature coaxial connector, the probe provides stable signal transmission and reliable integration with 3300 XL Proximitor sensor systems in electrically noisy and high vibration installations.\u003c\/p\u003e\n\u003ch3\u003eTechnical Configuration\u003c\/h3\u003e\n\u003cp\u003eThe model structure defines mechanical length, connectivity, and approval configuration for system integration.\u003c\/p\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eSegment\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e146054\u003c\/td\u003e\n\u003ctd\u003e3300 XL ceramic capped probe series identifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e032\u003c\/td\u003e\n\u003ctd\u003eMechanical and probe configuration code\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003eTotal length option 1.0 m (3.3 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector with standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCN\u003c\/td\u003e\n\u003ctd\u003eCountry specific agency approval option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe ceramic capped sensing tip enhances durability in high temperature and abrasive shaft environments, improving long term measurement stability. The ClickLoc connector system ensures secure locking and minimizes signal loss due to vibration or connector micro-movement.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e146054-032-10-02-CN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eU.S.A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL Ceramic Capped Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m (3.3 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eStandard coaxial cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip\u003c\/td\u003e\n\u003ctd\u003eCeramic capped design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-51 to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL Proximitor sensor system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eShaft vibration and displacement monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this probe compatible with standard 3300 XL Proximitor sensors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It is fully compatible with Bently Nevada 3300 XL Proximitor systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the benefit of the ceramic capped design?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt improves thermal resistance and reduces wear at the probe tip in harsh mechanical environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it operate in high vibration environments?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The ClickLoc connector and rugged cable design support stable operation under continuous vibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes CN option affect functionality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. CN defines regional certification and approval configuration only.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation and Engineering Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure correct probe gap calibration during installation to maintain linear eddy current response across the measurement range.\u003c\/p\u003e\n\u003cp\u003eRoute probe cables away from high voltage and VFD output lines to minimize electromagnetic interference and signal distortion.\u003c\/p\u003e\n\u003cp\u003eVerify ClickLoc connector engagement until a full locking confirmation is achieved before system commissioning.\u003c\/p\u003e\n\u003cp\u003eMaintain proper mechanical alignment of the probe tip relative to shaft surface to avoid nonlinear signal behavior under high-speed rotation.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668317827435,"sku":"146054-032-10-02-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/146054-032-10-02-cn-jlk4lwzd5fc_106c2b65-e0eb-4d64-afed-44908c9fbd61.jpg?v=1765521083"},{"product_id":"bently-nevada-330902-36-89-05-01-00-3300-nsv-proximity-probe","title":"Bently Nevada 330902-36-89-05-01-00 3300 NSv Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cspan class=\"citation-83\"\u003eThe Bently Nevada\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003e330902-36-89-05-01-00\u003c\/strong\u003e\u003cspan class=\"citation-83 citation-end-83\"\u003e\u003cspan\u003e \u003c\/span\u003eis a high-precision proximity probe belonging to the 3300 NSv (Narrow Side view) series.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThis transducer is specifically designed for industrial applications where installation space is restricted or where target diameters are smaller than standard 8 mm probes can accommodate. It is primarily utilized for radial vibration, axial thrust position, and speed measurements on small-bore rotating machinery, such as centrifugal compressors, aero-derivative gas turbines, and specialized industrial pumps. The 3300 NSv system is engineered to provide a linear voltage output over a defined range when paired with a matching Proximitor Sensor, ensuring reliable machinery protection and diagnostic data for Plant Asset Management.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe model string\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330902-36-89-05-01-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edefines the physical dimensions and electrical configuration of the probe:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330902\u003c\/strong\u003e: 3300 NSv Proximity Probe, 3\/8-24 UNF thread, without armor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan class=\"citation-82\"\u003e\u003c\/span\u003e\u003cstrong\u003e36\u003c\/strong\u003e\u003cspan class=\"citation-82 citation-end-82\"\u003e: Unthreaded Length Option of 3.6 inches.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e89\u003c\/strong\u003e: Overall Case Length Option of 8.9 inches.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05\u003c\/strong\u003e: Total Length Option of 0.5 meter (1.67 feet).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e01\u003c\/strong\u003e: Connector Option specifying a miniature coaxial ClickLoc connector with an integrated connector protector and standard cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan class=\"citation-81\"\u003e\u003c\/span\u003e\u003cstrong\u003e00\u003c\/strong\u003e\u003cspan class=\"citation-81 citation-end-81\"\u003e: Agency Approval Option; no specific hazardous area certifications required for this unit.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e330902-36-89-05-01-00\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eU.S.A.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eProbe Tip Diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e5 mm (approx.)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eThread Size\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/8-24 UNF\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eUnthreaded Length\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3.6 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCase Length\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8.9 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTotal Length\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.5 meter\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eConnector Type\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eClickLoc Miniature Coaxial\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTarget Material\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 4140 Steel (Standard Calibration)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Weight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.5 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the primary applications for the 3300 NSv series?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NSv series is optimized for targets as small as 0.25 inches (6.35 mm) in diameter. It is used when a standard 8 mm probe would experience \"side-view\" interference from surrounding metal or when the shaft diameter is too small for a standard sensor to maintain linearity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this 0.5-meter probe with a 9.0-meter extension cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The total system length (probe plus extension cable) must match the Proximitor Sensor's calibration. For a 0.5-meter probe, you would typically use a 4.5-meter extension cable to achieve a 5.0-meter total system length, or a 6.5-meter cable for a 7.0-meter system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the connector protector benefit the installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e01\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econnector option includes a protector that prevents the miniature coaxial ClickLoc connector from becoming contaminated by oil, moisture, or dust. It also provides mechanical strain relief to prevent the connector from vibrating loose during machine operation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003ch3\u003eMechanical Installation and Threading\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330902-36-89-05-01-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efeatures a 3\/8-24 UNF thread. During installation, ensure the mounting hole is tapped cleanly and free of debris. Use a lubricant that is compatible with the machine's environment. The 3.6-inch unthreaded portion is designed to pass through the machine housing or bracket without thread engagement, allowing for easier adjustment of the probe gap.\u003c\/p\u003e\n\u003ch3\u003eGap Voltage Adjustment\u003c\/h3\u003e\n\u003cp\u003eProper transducer performance depends on the mechanical \"Gap\" between the probe tip and the target. Connect the probe to the Proximitor and monitor the DC voltage. For the 3300 NSv system, the probe should be adjusted until the Proximitor outputs the specific center-gap voltage (typically -10.0 VDC). Secure the locknut once the gap is established to prevent the probe from backing out due to thermal expansion or vibration.\u003c\/p\u003e\n\u003ch3\u003eCable Routing and Protection\u003c\/h3\u003e\n\u003cp\u003eThe standard cable on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330902-36-89-05-01-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis FEP insulated but does not include stainless steel armor. To prevent mechanical damage, route the probe cable through rigid or flexible conduit immediately upon exiting the machine housing. Observe the minimum bend radius of 25.4 mm (1.0 inch) to prevent internal dielectric damage which can cause signal noise or \"spiking\" in vibration data.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318155115,"sku":"330902-36-89-05-01-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330902-36-89-05-01-00-n1acofbewii_22cd1b43-ee13-480e-b5ff-06f2c4bd8fd8.jpg?v=1765521095"},{"product_id":"bently-nevada-330707-00-25-10-12-00-3300-xl-11-mm-proximity-probe","title":"Bently Nevada 330707-00-25-10-12-00 3300 XL 11 mm proximity probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Bently Nevada\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330707-00-25-10-12-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a high-precision\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3300 XL 11 mm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eeddy current proximity probe designed for critical machinery protection systems. This transducer is utilized for non-contact measurement of axial displacement (thrust), differential expansion, and vibration in large rotating machinery. The\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e11 mm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esystem provides an extended linear range of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e4.0 mm (160 mil)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith a standard sensitivity of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3.94 V\/mm (100 mV\/mil)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis specific configuration features a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e5\/8-18 UNF\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethreaded body with a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e2.5-inch\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eoverall case length and no unthreaded section. The probe is equipped with a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1.0-meter\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFluidLoc\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecable—engineered to prevent fluid migration through the cable interior—and a miniature coaxial\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClickLoc\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econnector. As indicated by the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esuffix, this unit is intended for applications where specific agency approvals for hazardous areas are not required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Configuration\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e330707-00-25-10-12-00\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 11 mm Probe (5\/8-18 UNF thread, without armor)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOverall Case Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.5 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.0 meter (3.3 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFluidLoc (Oil-resistant\/Fluid-penetration resistant)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eAgency Approval\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e00 - Not required\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.5 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMade in U.S.A.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eIndustrial procurement and replacement tasks must reference the complete option breakdown to ensure exact mechanical and electrical compatibility.\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330707-00-25-10-12-00\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement Advice\u003c\/strong\u003e: Because\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e11 mm probes\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare critical for thrust and differential expansion protection, verify if the corresponding Proximitor sensor requires simultaneous replacement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Integrity\u003c\/strong\u003e: Always ensure all system components (Probe, Extension Cable, and Proximitor) are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3300 XL 11 mm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eseries, typically identified by purple color coding.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003ch3\u003eInstallation Steps (Gap Adjustment)\u003c\/h3\u003e\n\u003cp\u003eTo ensure accurate measurement within the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e4.0 mm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003elinear range, the probe must be gapped correctly during installation:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Pre-installation\u003c\/strong\u003e: Thread the probe into the mounting bracket or bearing cap. Rotate the probe body only before connecting the cable to avoid twisting the integrated\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1.0-meter\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003elead.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Monitoring\u003c\/strong\u003e: Connect the probe to the appropriate\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3300 XL 11 mm Proximitor\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand apply\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e-24 Vdc\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003epower. Monitor the DC voltage between the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOUT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCOM\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eterminals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGapping\u003c\/strong\u003e: Gradually thread the probe toward the target surface. Adjust until the DC voltage reaches approximately\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e-10.0 Vdc\u003c\/strong\u003e, which represents the center of the linear range (a gap of roughly\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e2.3 mm \/ 90 mil\u003c\/strong\u003e).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Torque\u003c\/strong\u003e: Tighten the locknut to the recommended torque of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e15.2 N·m (133 in·lb)\u003c\/strong\u003e; do not exceed\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e45.2 N·m\u003c\/strong\u003e. Verify the voltage after tightening to ensure the probe did not shift.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Wiring Guide\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProbe to Extension Cable\u003c\/strong\u003e: Hand-tighten the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClickLoc\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econnectors (maximum torque\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e0.565 N·m\u003c\/strong\u003e). The use of connector protectors is highly recommended to prevent fluid or moisture ingress.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProximitor to Monitor\u003c\/strong\u003e: Use 3-wire shielded cable (16 to 24 AWG) to connect the Proximitor to monitoring modules like the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3500\/42M\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVTX (-24V)\u003c\/strong\u003e: Connect to the monitor’s -24Vdc power output.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCOM (GND)\u003c\/strong\u003e: Connect to the signal common.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eOUT (SIG)\u003c\/strong\u003e: Connect to the signal input (delivers -1V to -17V range).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSHLD\u003c\/strong\u003e: Ground the shield at the monitor end only to prevent ground loops.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the benefit of the FluidLoc cable (Option 12)?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt prevents oil and other machine fluids from leaking through the cable into junction boxes or monitors, which is critical for pressurized housing applications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix 11 mm components with 8 mm components?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Components must be matched by series. Mixing\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e11 mm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eprobes with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e8 mm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProximitors will result in significant measurement errors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWhat target material is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard calibration is for AISI 4140 steel; use with other materials will require scale factor adjustments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318187883,"sku":"330707-00-25-10-12-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330707-00-25-10-12-00-z0mdpe5x4u2_d4410e8c-7b7a-4bd1-881e-c803ebf207ca.jpg?v=1765521096"},{"product_id":"bently-nevada-330101-00-25-10-02-cn-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330101-00-25-10-02-CN 3300 XL 8 mm Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Bently Nevada 330101-00-25-10-02-CN is a high-precision 8 mm eddy current proximity probe, a core component of the 3300 XL Transducer System. This system is designed for non-contacting displacement measurements on critical rotating machinery, providing vital data for vibration monitoring, radial position, and axial thrust analysis. It is fully compliant with API 670 standards for machinery protection.\u003c\/p\u003e\n\u003cp\u003eThis specific configuration features a 3\/8-24 UNF thread, a 2.5-inch overall case length, and is supplied without stainless steel armor. The assembly includes a 1.0-metre (3.3 feet) integral cable terminated with a miniature coaxial ClickLoc connector. The \"CN\" suffix denotes country-specific agency approvals, primarily NEPSI, for hazardous area installations within the People's Republic of China. When integrated into a complete loop with a 3300 XL extension cable and Proximitor sensor, it delivers a linear scale factor of 7.87 V\/mm (200 mV\/mil).\u003c\/p\u003e\n\u003ch3\u003eTechnical Configuration\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330101-00-25-10-02-CN\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm Proximity Probe\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/8-24 UNF\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOverall Case Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.5 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal Cable Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.0 Metre (3.3 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eArmor Option\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eWithout Armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eAgency Approval\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCN (NEPSI \/ China Specific)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-35°C to +177°C (-31°F to +350°F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePressure Rating\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFully sealed tip; resistant to water and oil\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMade in U.S.A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eAccurate identification of the probe configuration is essential for system compatibility. The part number 330101-00-25-10-02-CN is derived from the following option codes:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eCode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e330101\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBase Model\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm Probe, 3\/8-24 UNF thread, without armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnthreaded Length\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-25\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOverall Case Length\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.5 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-10\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eTotal Length\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.0 Metre (3.3 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-02\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eConnector\/Cable Type\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eClickLoc connector, standard cable\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-CN\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAgency Approval\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNEPSI \/ China specific approvals\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLoop Calibration and Total Length:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3300 XL 8 mm probe is an inductive component within a tuned resonant circuit. This 1.0-metre probe must be paired with an extension cable to reach the required total system length (typically 5.0 or 9.0 metres) as calibrated for the Proximitor sensor. Using a mismatched total loop length will cause significant scale factor errors and zero-point drift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Mounting Clearances:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo ensure a linear output and prevent \"side-view\" interference, a minimum side clearance of 13 mm (0.5 in) from metallic surfaces must be maintained around the probe tip. If installing through a mounting bracket, ensure the bracket is rigid enough to avoid resonance frequencies within the machine's operating range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGap Setting and Voltage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe probe should be gapped at the electrical center of its linear range. For a 3300 XL system, the nominal mid-range gap is 1.27 mm (50 mils), which typically corresponds to a DC voltage output of -10.0 Vdc at the Proximitor sensor's \"OUT\" terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental Protection:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc coaxial connector is sensitive to moisture and lubricant ingress. In oil-mist environments (common in bearing housings), it is mandatory to use the connector protector or oil-resistant heat-shrink tubing to prevent signal \"spiking\" or low insulation resistance faults.\u003c\/p\u003e\n\u003ch3\u003eMaintenance \u0026amp; Troubleshooting FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can this probe be used with a legacy (non-XL) 3300 Proximitor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: While physically compatible, the 3300 XL series has a different temperature compensation profile and scale factor stability. For maximum accuracy and API 670 compliance, always match 3300 XL probes with 3300 XL Proximitors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What indicates a faulty ClickLoc connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: High-frequency noise or intermittent \"Not OK\" status in the vibration monitor often indicates a loose or contaminated coaxial connection. Inspect the center pin for continuity and ensure the junction is dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I handle a \"Material Error\"?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Standard probes are calibrated for AISI 4140 steel targets. If the target shaft is a different alloy, the scale factor (V\/mm) will change. This requires a software-based scale factor adjustment or a Material Correction Factor (MCF).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the \"CN\" approval functionally different from standard approvals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: No. The \"CN\" suffix ensures the unit carries the NEPSI markings required by Chinese regulatory authorities for explosive atmospheres. The electrical and mechanical performance remains identical to standard 3300 XL probes.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318318955,"sku":"330101-00-25-10-02-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330101-00-25-10-02-cn-o15jtrnz0a3_50ae2112-bc75-415e-a02b-019f51b4dc81.jpg?v=1765521100"},{"product_id":"bently-nevada-330101-00-25-10-02-00-3300-xl-8-mm-proximity-probes-metric","title":"Bently Nevada 330101-00-25-10-02-00 | 3300 XL 8 mm Proximity Probes, Metric","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Bently Nevada 330101-00-25-10-02-00 is an 8 mm eddy current proximity probe belonging to the 3300 XL series. This transducer is designed for non-contacting displacement and vibration measurements in critical machinery protection systems (TSI). It is a standard component of the 3300 XL Proximity Transducer System, used to monitor radial shaft vibration, axial position, and speed on high-speed rotating equipment such as steam turbines, centrifugal compressors, and motors.\u003c\/p\u003e\n\u003cp\u003eThis specific configuration utilizes a 3\/8-24 UNF thread with a 2.5-inch overall case length and is supplied without stainless steel armor. The assembly features a 1.0-metre (3.3 feet) integral cable terminated with a miniature coaxial ClickLoc™ connector. It provides a linear range of 2.0 mm (80 mils) and a standard scale factor of 7.87 V\/mm (200 mV\/mil) when paired with the corresponding 3300 XL Proximitor sensor and extension cable.\u003c\/p\u003e\n\u003ch3\u003eTechnical Configuration\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e330101-00-25-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 mm Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 XL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/8-24 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall Case Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal Cable Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.0 Metre (3.3 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc™\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eArmor Option\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWithout Armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAgency Approval\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-35°C to +177°C (-31°F to +350°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in U.S.A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eThis assembly is defined by its alphanumeric suffix codes. Procurement and engineering teams must verify all parameters to ensure mechanical fit and electrical compatibility with the system loop.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eOption Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330101\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Probe, 3\/8-24 UNF thread, without armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnthreaded Length: 0.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-25\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall Case Length: 2.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-10\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTotal Length: 1.0 Metre (3.3 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-02\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc™ connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAgency Approval: Not required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Loop Integrity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3300 XL 8 mm probe is a component of a tuned resonant circuit. This 1.0-metre probe must be paired with an extension cable to reach the required total system length (typically 5.0 or 9.0 metres) as calibrated for the Proximitor sensor. Using a mismatched total length will cause significant scale factor errors and non-linearity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Installation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen installing the 3\/8-24 UNF threads, do not exceed the maximum torque of 13.5 N·m (120 in·lb). Over-torquing can lead to case distortion or internal sensing coil damage. For radial vibration monitoring, ensure the probe tip has a minimum side clearance of 13 mm (0.5 in) from surrounding metallic surfaces to prevent signal interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eField Wiring and Grounding:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc™ connector must be kept clean and dry. In oil-mist environments, it is mandatory to use a connector protector or silicone heat-shrink tubing to prevent lubricant ingress. The coaxial cable shield should be grounded only at the monitor\/Proximitor end to prevent ground loops that introduce 50\/60 Hz noise into the signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement Precautions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen replacing legacy 3300 probes (non-XL) with 3300 XL series probes, verify the Proximitor sensor is also upgraded to the 3300 XL series. While physically compatible, the XL series has a different temperature compensation profile and scale factor stability.\u003c\/p\u003e\n\u003ch3\u003eMaintenance \u0026amp; Troubleshooting FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can this 1.0m probe be used as a standalone sensor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: No. A 1.0-metre probe is designed to connect to an extension cable. The Proximitor sensor requires the total loop impedance of the specified system length (5m or 9m) to function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What indicates a faulty ClickLoc connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: High-frequency \"spiking\" or an unstable DC gap voltage typically indicates a loose or contaminated coaxial connection. Clean the contacts with an approved electronic cleaner and ensure the connector is dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I verify the DC gap voltage for a 3300 XL system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: For most applications, the nominal mid-range gap is 1.27 mm (50 mils), which corresponds to approximately -10.0 Vdc at the Proximitor output terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the impact of target material on calibration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Standard probes are calibrated for AISI 4140 steel. If the target shaft is a different alloy, the scale factor will change, requiring a Material Correction Factor (MCF) adjustment in the monitoring software.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318351723,"sku":"330101-00-25-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330101-00-25-10-02-00-kyxwvwtr0nr_268b1358-092e-4668-9dad-d1768226f631.jpg?v=1765521102"},{"product_id":"bently-nevada-330103-00-03-10-02-cn-3300-xl-proximity-probe","title":"Bently Nevada 330103-00-03-10-02-CN 3300 XL Proximity Probe","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Bently Nevada 330103-00-03-10-02-CN is an 8 mm eddy current proximity probe part of the 3300 XL series. This transducer is engineered for non-contacting displacement and vibration measurements in critical machinery applications, including steam and gas turbines, centrifugal compressors, and industrial pumps. The 3300 XL system provides an advanced scale factor of 7.87 V\/mm (200 mV\/mil), offering high-fidelity data for radial vibration, axial position, and speed measurements.\u003c\/p\u003e\n\u003cp\u003eThis specific configuration features a 3\/8-24 UNF thread with a 0.3-inch overall case length and is supplied without stainless steel armor. The assembly includes a 1.0-metre (3.3 feet) integral cable terminated with a miniature coaxial ClickLoc™ connector. The \"CN\" suffix indicates compliance with country-specific hazardous area certifications, including NEPSI approvals for the Chinese market. It is designed to operate within the 3300 XL Proximitor® sensor loop for reliable machinery protection and diagnostic monitoring.\u003c\/p\u003e\n\u003ch3\u003eTechnical Configuration\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330103-00-03-10-02-CN\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eProximity Probes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/8-24 UNF\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOverall Case Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.3 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal Cable Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.0 Metre (3.3 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc™\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eArmor Option\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eWithout Armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eAgency Approval\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCN (Country Specific \/ NEPSI)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-35°C to +177°C (-31°F to +350°F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMade in U.S.A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e4.0 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eThis assembly is defined by its alphanumeric suffix codes. Procurement and engineering teams must verify all parameters to ensure mechanical fit and electrical compatibility with the system loop.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eOption Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e330103\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm Probe, 3\/8-24 UNF thread, without armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnthreaded Length: 0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-03\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOverall Case Length: 0.3 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-10\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eTotal Length: 1.0 Metre (3.3 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-02\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-CN\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAgency Approval: Country specific (e.g., NEPSI)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Mounting and Clearance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 330103 probe must be mounted in a rigid bracket to prevent false vibration readings caused by bracket resonance. Ensure a minimum side clearance of 13 mm (0.5 in) from metallic surfaces surrounding the probe tip to maintain the 7.87 V\/mm scale factor. When installing the 0.3-inch case, use a torque wrench to ensure the 3\/8-24 UNF threads do not exceed 13.5 N·m (120 in·lb) to prevent case distortion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoop Calibration:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3300 XL 8 mm probe is a component of a tuned resonant circuit. This 1.0-metre probe must be paired with the correct length of extension cable (e.g., 4.0 m or 8.0 m) to reach the required 5.0-metre or 9.0-metre total system length calibrated for the Proximitor® sensor. Deviation from the specified total length will result in significant sensitivity errors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eField Wiring and Shielding:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe coaxial ClickLoc™ connector must be protected from environmental contamination. For internal machine applications, use oil-resistant heat-shrink tubing or connector protectors to prevent moisture and lubricant ingress. The shield of the extension cable must be grounded at the monitor end only to prevent ground loops that introduce 50\/60 Hz noise into the vibration signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTarget Material Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard calibration is performed using AISI 4140 steel. If the target shaft is composed of different materials (e.g., stainless steel or chrome-plated shafting), a Scale Factor Error will occur. Technical staff must apply a Material Correction Factor within the monitoring system configuration to ensure accurate displacement readings.\u003c\/p\u003e\n\u003ch3\u003eMaintenance \u0026amp; Troubleshooting FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can this 1.0m probe be used as a standalone sensor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: No. A 1.0-metre probe must be connected to an extension cable. The Proximitor® requires a specific total loop impedance (5m or 9m) to maintain its linear output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What indicates a faulty ClickLoc connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Signal \"spiking\" or high-frequency noise in the monitor usually indicates a loose or contaminated coaxial connection. Inspect the center pin for continuity and ensure the connector is dry and free of metallic debris.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I verify the DC gap voltage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: For a 3300 XL system, the nominal mid-range gap voltage is -10.0 Vdc. Use a voltmeter at the Proximitor terminals during installation to set the physical gap until this voltage is achieved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this probe compatible with older 3300 series monitors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Yes, 3300 XL probes are generally backward compatible with 3300 systems, but it is recommended to use 3300 XL Proximitor sensors to take full advantage of the improved scale factor and temperature stability.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318417259,"sku":"330103-00-03-10-02-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330103-00-10-10-02-cn-extension-cable-gcvwrdoz53m_77ce8065-4b50-4c36-b5ba-03af14d6511e.jpg?v=1765449495"},{"product_id":"bently-nevada-21000-28-05-00-047-04-02-proximity-probe-housing-assembly","title":"Bently Nevada 21000-28-05-00-047-04-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Bently Nevada 21000-28-05-00-047-04-02 is an external mounting Proximity Probe Housing Assembly designed to facilitate the installation of proximity transducers through machine casings. It is a primary component for Turbine Supervisory Instrumentation (TSI) systems, allowing for the adjustment or replacement of probes without disassembling the machine. The assembly provides environmental protection for the probe and maintains a seal against machine internal pressure.\u003c\/p\u003e\n\u003cp\u003eThis specific 21000 series configuration includes an integrated 3300 XL 8 mm proximity probe with multiple agency approvals and a 0.5-metre (20 in) integral cable. The housing is specified with a 4.7-inch probe penetration depth and a 3\/4-14 NPT mounting thread. It is commonly utilized in power generation and petrochemical industries for monitoring radial vibration and axial thrust on steam turbines, compressors, and large gearboxes where external accessibility to the transducer is required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Configuration\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e21000-28-05-00-047-04-02\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eProximity Probe Housing Assemblies\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProbe Option\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm (Multiple Approvals)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProbe Cable Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.5 Metre (20 in)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eStandoff Adapter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e00 (None)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProbe Penetration\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e4.7 Inches (Code 047)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eFittings Option\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOne 3\/4-14 NPT plug only\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eMounting Thread\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/4-14 NPT\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eHousing Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAluminum (Standard) or Stainless Steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-35°C to +177°C (-31°F to +350°F) for Probe\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMade in U.S.A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3.0 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eThis assembly is configured based on specific application requirements. Ensure the penetration depth and mounting threads match the machine casing specifications.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eOption Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e21000\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBase Model\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eExternal Mounting Proximity Probe Housing\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-28\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eProbe Type\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm probe, Multiple Approvals\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-05\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCable Length\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.5 metre (20 in)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eStandoff Adapter\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNone\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-047\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePenetration\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e4.7 inches\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-04\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFittings\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOne 3\/4-14 NPT plug only\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-02\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMounting Thread\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/4-14 NPT\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Alignment and Gapping:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 21000 housing allows for the probe to be gapped externally. During installation, the probe is threaded into the sleeve until it reaches the target. It must then be backed off to achieve the desired DC gap voltage (typically -10.0 Vdc for 3300 XL systems). Once gapped, the locknut must be secured to prevent the probe from moving due to machine vibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressure Sealing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3\/4-14 NPT mounting thread must be treated with a high-quality thread sealant to ensure a leak-proof connection with the machine casing. If the machine utilizes high-pressure lubricants or is under vacuum, verify the integrity of the O-rings within the housing assembly during routine maintenance intervals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable Protection:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 0.5-metre integral cable is terminated with a miniature coaxial ClickLoc connector. This connector should be housed within the terminal head of the 21000 assembly. Ensure the cable is not pinched when closing the housing cover. Use the provided 3\/4-14 NPT plug for unused conduit entries to maintain the environmental rating of the enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement Precautions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen replacing a probe within the 21000 housing, ensure the replacement probe matches the \"Total Length\" of the original system (typically 5m or 9m total). This 0.5m probe requires a specific extension cable to reach the Proximitor sensor. Using mismatched lengths will lead to calibration errors in the vibration monitor.\u003c\/p\u003e\n\u003ch3\u003eTroubleshooting FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I change the penetration depth in the field?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: No. The penetration depth (047 = 4.7 inches) is factory-set based on the internal sleeve and probe length. Attempting to modify this will compromise the mechanical limits and gapping capability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What if oil is leaking from the housing head?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: This indicates a failure of the internal seal or O-ring between the probe sleeve and the housing body. Inspect the O-rings for degradation or hardening and replace them with authentic Bently Nevada seal kits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I identify a grounding issue with the 21000 housing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: If the vibration signal shows 50\/60 Hz interference, verify that the housing is electrically bonded to the machine casing and that the cable shield is only grounded at the Proximitor\/Rack end to avoid ground loops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the 3300 XL probe inside the housing replaceable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Yes. The probe is a discrete component (-28 option). However, it is highly recommended to replace the probe with the exact same option code to maintain the hazardous area certifications associated with the assembly.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318450027,"sku":"21000-28-05-00-047-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21000-28-05-00-047-04-02-proximity-probe-housingassemblies-i0wr22qjvp4_c6596c84-1084-4307-9e8a-4ce8b22f459d.jpg?v=1765446987"},{"product_id":"bently-nevada-330904-xx-xx-10-02-cn-158268-00-34-3300-nsv-proximity-probe","title":"Bently Nevada 330904-XX-XX-10-02-CN (158268-00-34) 3300 NSv Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Bently Nevada 330901-XX-XX-10-02-CN (Engineering Part Number 158268-00-34) is an eddy current proximity transducer belonging to the 3300 NSv series. The NSv (Narrow Side View) system is specifically designed for applications where standard 8 mm probes cannot be used due to physical space constraints or tight mounting clearances. It is predominantly used for vibration and position monitoring on small-diameter shafts or within machinery with restricted internal access, such as centrifugal compressors, high-speed pumps, and aeroderivative turbines.\u003c\/p\u003e\n\u003cp\u003eThis specific model features an M8 x 1 metric thread and is equipped with stainless steel armor for enhanced mechanical protection of the coaxial cable. The 1.0-metre total length assembly is terminated with a miniature coaxial ClickLoc connector. The \"CN\" suffix confirms adherence to country-specific hazardous area approvals, including NEPSI certification for the Chinese market. It provides a linear output when paired with a matched 3300 NSv Proximitor Sensor.\u003c\/p\u003e\n\u003ch3\u003eTechnical Configuration\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330904-XX-XX-10-02-CN\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eEngineering Part No.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e158268-00-34\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eProximity Probes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 NSv\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eM8 x 1\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eArmor Option\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eWith Stainless Steel Armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal Cable Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.0 Metre (39 in)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eAgency Approval\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCN (NEPSI\/Hazardous Area)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-35°C to +177°C (-31°F to +350°F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMade in U.S.A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eIndustrial procurement should reference both the model number and the engineering part number to ensure exact configuration matching.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eModel Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e330904-XX-XX-10-02-CN\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e158268-00-34\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 NSv Probe, M8 x 1, Armor, 1.0m Length\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMounting and Clearance Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3300 NSv series is designed to reduce the \"side-view\" effect; however, a minimum clearance from surrounding metal is still required to maintain linearity. Ensure the probe tip is not recessed into the mounting bracket. For M8 x 1 threads, the recommended mounting torque is 4.5 N·m (40 in·lb) to prevent case distortion or thread damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable Protection (Armor):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis model is supplied with stainless steel armor. The armor protects the coaxial core from abrasion and crushing; however, it is not fluid-tight. In environments with heavy oil or chemical exposure, ensure the armored cable is further protected or routed such that liquids cannot migrate into the ClickLoc connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrounding and Shielding:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProper signal integrity relies on a single-point ground. The shield of the extension cable should be grounded at the Proximitor end (usually in the monitor rack or local junction box). Ensure the probe armor does not inadvertently ground at the machine casing if the system design requires isolated grounds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement Precautions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 158268-00-34 is a specific engineering configuration. When replacing an existing probe, verify the unthreaded and overall case length (marked as XX-XX in the ordering string) to ensure the probe tip reaches the target shaft without mechanical interference.\u003c\/p\u003e\n\u003ch3\u003eMaintenance \u0026amp; Troubleshooting FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can the 3300 NSv probe be used with a standard 3300 XL Proximitor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: No. The 3300 NSv probe must be paired with a 3300 NSv Proximitor. The internal sensing coil and frequency response of the NSv series differ from the 3300 XL series, and mixing them will result in significant measurement errors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the purpose of the ClickLoc connector protector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: The protector prevents the miniature coaxial connector from loosening due to machine vibration and prevents environmental contaminants (dust\/oil) from entering the signal path. It should always be installed and seated correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I handle unstable DC gap voltage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Unstable gap voltage often indicates a loose connection at the ClickLoc junction or moisture ingress. Disconnect the cable, clean the contacts with an approved electronic cleaner, and dry thoroughly before reconnecting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the target material calibration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Standard Bently Nevada proximity probes are calibrated for AISI 4140 steel. If the target shaft is a different alloy, the scale factor (V\/mm) will change, requiring a software scale factor adjustment in the monitoring system.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318482795,"sku":"330904-XX-XX -10-02-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330904-xx-xx-10-02-cn-wqkn2jbrtsd_efaefd85-80ff-4ee4-869a-7091b6f00dca.jpg?v=1765521106"},{"product_id":"bently-nevada-330101-00-24-05-02-00-3300-xl-proximity-probe","title":"Bently Nevada 330101-00-24-05-02-00 3300 XL Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Bently Nevada 330101-00-24-05-02-00 is a high-precision 8 mm eddy current proximity probe part of the 3300 XL series. This transducer is engineered for non-contacting displacement measurements in critical rotating machinery, providing essential data for vibration monitoring, radial position, and axial thrust analysis. It is compatible with 3300 XL Proximitor Sensors and is widely utilized in the monitoring of steam turbines, centrifugal compressors, and industrial pumps.\u003c\/p\u003e\n\u003cp\u003eThis specific configuration features a 3\/8-24 UNF thread with a 2.4-inch overall case length and is supplied without stainless steel armor. The assembly includes a 0.5-metre (1.6 feet) integral cable terminated with a miniature coaxial ClickLoc connector. Designed to operate under extreme industrial conditions, the probe maintains a linear scale factor of 7.87 V\/mm (200 mV\/mil) when paired with the appropriate 3300 XL extension cable and Proximitor.\u003c\/p\u003e\n\u003ch3\u003eTechnical Configuration\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330101-00-24-05-02-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eProximity Probes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProbe Tip Diameter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/8-24 UNF\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOverall Case Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.4 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal Cable Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.5 Metre (1.6 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eArmor Option\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eWithout Armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eAgency Approval\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNot Required\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMade in U.S.A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-35°C to +177°C (-31°F to +350°F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.5 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eAccurate identification of the probe configuration is essential for system compatibility. The part number 330101-00-24-05-02-00 is derived from the following option codes:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eOption Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e330101\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm Probe, 3\/8-24 UNF thread, without armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnthreaded Length: 0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-24\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOverall Case Length: 2.4 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-05\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eTotal Length: 0.5 metre (1.6 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-02\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAgency Approval: Not required\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCalibration and Loop Length:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3300 XL 8 mm probe is a component of a tuned resonant circuit. This 0.5-metre probe must be used with a 4.5-metre or 8.5-metre extension cable to reach the required 5.0-metre or 9.0-metre total system length. Using a total length that deviates from the Proximitor's calibrated specification will result in an incorrect Scale Factor (SSF) and non-linear output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Installation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen installing the 3\/8-24 UNF probe through the machine casing, ensure the mounting bracket is rigid to avoid resonance. Tighten the probe to a maximum torque of 13.5 N·m (120 in·lb). Exceeding this limit can cause case distortion or damage to the internal sensing coil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGap Setting:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe probe should be gapped at the mechanical center of its linear range. For a 3300 XL system, the nominal mid-range gap is 1.27 mm (50 mils), which typically corresponds to a DC voltage output of -10.0 Vdc from the Proximitor sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector Protection:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc connector (-02) is designed for secure coupling but remains sensitive to environmental contamination. For internal machine applications, the use of connector protectors or oil-resistant heat-shrink tubing is recommended to prevent moisture or lubricant ingress, which can lead to signal \"spiking\" or drift.\u003c\/p\u003e\n\u003ch3\u003eTroubleshooting FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this probe with a standard 3300 (non-XL) Proximitor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: While 3300 XL probes are physically compatible, the 3300 XL system has a different scale factor and temperature compensation profile. For maximum accuracy, it is recommended to use 3300 XL Proximitor sensors with 3300 XL probes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What indicates a faulty ClickLoc connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: High-frequency noise or \"spiking\" in the vibration signal often indicates a loose or contaminated coaxial connection. Check the center pin for continuity and ensure the connector is dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the 0.5m length sufficient for my installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: The 0.5-metre probe is typically used when the connection to the extension cable occurs inside the machine or a nearby junction box. Ensure the total length (probe + extension cable) matches your specific Proximitor model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this probe require a safety barrier?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Since this model is \"Not Required\" (Option 00) for agency approvals, it does not carry intrinsic safety certifications. If the installation area is classified as hazardous, a probe with the appropriate approval code (e.g., -05 for multi-approvals) must be selected.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318548331,"sku":"330101-00-24-05-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330101-00-24-05-02-00-ajtyggij1xx_d67f1f3a-9448-457d-8f8d-c2fabc603500.jpg?v=1765521108"},{"product_id":"bently-nevada-330101-00-30-05-02-00-3300-xl-proximity-probe","title":"Bently Nevada 330101-00-30-05-02-00 3300 XL Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Bently Nevada 330101-00-30-05-02-00 is a high-performance 8 mm eddy current proximity probe belonging to the 3300 XL series. This transducer is a primary component for vibration monitoring, radial position, and axial thrust measurement in critical rotating machinery, including steam turbines, centrifugal compressors, and industrial pumps. Utilizing the eddy current principle, it provides a non-contacting method to observe the target shaft's movement relative to the machine housing.\u003c\/p\u003e\n\u003cp\u003eThis specific configuration features a 3\/8-24 UNF thread with a 3.0-inch overall case length and is supplied without stainless steel armor. With a total electrical length of 0.5 metres (1.6 feet), it is intended for internal mounting applications where the probe is installed through a machine casing and connected to an extension cable. The assembly utilizes the ClickLoc miniature coaxial connector, ensuring signal integrity through vibration-resistant coupling.\u003c\/p\u003e\n\u003ch3\u003eTechnical Configuration\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330101-00-30-05-02-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eProximity Probes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProbe Tip Diameter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/8-24 UNF\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOverall Case Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal Cable Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.5 Metre (1.6 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature Coaxial ClickLoc\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eArmor Option\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eWithout Armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eAgency Approval\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNot Required\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMade in U.S.A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-35°C to +177°C (-31°F to +350°F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eThis assembly is defined by its alphanumeric suffix codes. Procurement and engineering teams must verify all parameters to ensure mechanical fit and electrical compatibility with the system loop.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eOption Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e330101\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm Probe, 3\/8-24 UNF thread, without armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnthreaded Length: 0.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-30\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOverall Case Length: 3.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-05\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eTotal Length: 0.5 metre (1.6 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-02\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAgency Approval: Not required\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Clearances:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo ensure a linear output and prevent \"side-view\" interference, a minimum side clearance of 13 mm (0.5 in) from metallic surfaces must be maintained around the probe tip. If installing multiple probes in a single radial bearing plane, maintain a minimum spacing of 40 mm (1.6 in) between probe centers to avoid crosstalk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoop Calibration and Cable Length:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3300 XL 8 mm probe is part of a tuned system. This 0.5-metre probe must be paired with an extension cable to reach the total system length (typically 5.0 or 9.0 metres) required by the 3300 XL Proximitor Sensor. Using a probe\/cable combination that does not match the Proximitor’s calibrated length will result in significant sensitivity errors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector Integrity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc connector (-02) is designed for reliable signal transmission but is sensitive to environmental contamination. During installation, ensure connectors are free of moisture, oil, and metallic debris. The use of connector protectors or silicone heat-shrink tubing is recommended for internal machine environments to prevent connector loosening due to vibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Installation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3\/8-24 UNF threads should be tightened to a maximum torque of 13.5 N·m (120 in·lb). Over-torquing can lead to case distortion or thread stripping, which may compromise the hermetic seal of the probe tip.\u003c\/p\u003e\n\u003ch3\u003eMaintenance \u0026amp; Troubleshooting FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can this 0.5m probe be used as a standalone sensor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: No. A 0.5-metre probe is designed to be connected to an extension cable. The 3300 XL Proximitor requires a total loop length (e.g., 5m or 9m) to function within its linear range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What should the DC gap voltage be for a standard installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: For a 3300 XL system, the nominal mid-range gap voltage is typically -10.0 Vdc. Set the physical gap during installation to reach this voltage at the Proximitor output for optimal linear range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I handle a \"Probe Not Found\" or \"Not OK\" status on the monitor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Check the continuity of the center pin on the ClickLoc connector. Ensure the total resistance of the probe (center to outer conductor) is within factory limits (typically 3.0 to 12.0 ohms depending on cable length).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this probe compatible with the original 3300 system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: While 3300 XL probes are generally compatible with older 3300 systems, there may be slight differences in the scale factor. It is best practice to use 3300 XL components throughout the entire signal string.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318581099,"sku":"330101-00-30-05-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330101-00-30-05-02-00-sqwnomiy32m_03c00db5-4d96-4ac2-82af-7f73900aaa47.jpg?v=1765521109"},{"product_id":"bently-nevada-330901-00-90-10-01-cn-3300-nsv-proximity-probe","title":"Bently Nevada 330901-00-90-10-01-CN 3300 NSv Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Bently Nevada 330901-00-90-10-01-CN is a high-precision proximity probe belonging to the 3300 NSv (Narrow Side View) series. This transducer system is specifically engineered for applications with tight physical constraints or where the target surface is small, such as centrifugal compressors, pumps, and small turbines. The NSv series is designed to minimize \"side-view\" effects, allowing the probe to be used in proximity to neighboring metallic surfaces that would interfere with standard 8 mm probes.\u003c\/p\u003e\n\u003cp\u003eThis specific model features a 1\/4-28 UNF thread and is configured with a 9.0-inch overall case length and a 1.0-metre total length. It is supplied without stainless steel armor on the cable and includes a miniature coaxial ClickLoc connector with a connector protector. The \"CN\" suffix indicates compliance with ATEX\/IECEx and Chinese NEPSI hazardous area standards, making it suitable for global and domestic Chinese industrial projects.\u003c\/p\u003e\n\u003ch3\u003eHardware Configuration\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330901-00-90-10-01-CN\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eProximity Probes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 NSv\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1\/4-28 UNF\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOverall Case Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e9.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTotal Cable Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.0 Metre (39 in)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc with protector\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eArmor Option\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eWithout Armor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eHazardous Area Approvals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eATEX, IECEx, NEPSI (CN)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-35°C to +177°C (-31°F to +350°F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e~150 g (Net) \/ 1.0 kg (Shipping)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eThis part number is generated based on a specific configuration of the 330901 base model. Ensure all suffix codes match existing field documentation before ordering.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eOption Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e330901\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 NSv Proximity Probe (1\/4-28 UNF thread)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnthreaded Length: 0.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-90\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOverall Case Length: 9.0 in\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-10\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eTotal Length: 1.0 Metre (39 in)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-01\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc connector with protector\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-CN\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eATEX\/IECEx and NEPSI hazardous area markings\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eInstallation \u0026amp; Engineering Notes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eTarget Material and Surface Finish:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3300 NSv system is factory-calibrated for AISI 4140 steel. If the target shaft is made of a different material, the Proximitor sensor output will require recalibration or a scale factor adjustment. The target area should be at least 1.5 times the probe tip diameter (approx. 9.5 mm \/ 0.375 in) to ensure a linear output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Clearances:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NSv series is designed for tight spaces; however, a minimum side clearance of 1.5 mm (0.06 in) from the probe tip to surrounding metallic objects must be maintained to prevent signal distortion. When installing the 9.0-inch case, ensure the probe is not over-torqued into the mounting bracket; recommended torque for 1\/4-28 UNF threads is 2.3 N·m (20 in·lb).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable Protection and Routing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis model (-01) is supplied without armor. In environments with high mechanical risk or chemical exposure, the cable should be protected using a dedicated flexible conduit. All coaxial connections must be kept clean and dry. The ClickLoc connector protector must be properly seated to maintain signal integrity and prevent environmental contamination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHazardous Area Compliance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \"CN\" approval code is mandatory for installations within the People's Republic of China requiring NEPSI certification. For global projects, the ATEX and IECEx markings ensure the probe can be used in intrinsically safe (IS) circuits when paired with an approved Proximitor sensor and safety barrier.\u003c\/p\u003e\n\u003ch3\u003eTroubleshooting FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can a 3300 NSv probe be used with a standard 3300 XL Proximitor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: No. 3300 NSv probes require a dedicated 3300 NSv Proximitor sensor. Using a standard 3300 XL Proximitor will result in incorrect sensitivity and non-linear data.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the maximum recommended distance between the probe and Proximitor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: The total length of the probe plus the extension cable must match the Proximitor sensor’s design (typically 5.0 or 7.0 metres). This specific probe is 1.0 metre; thus, a 4.0 or 6.0 metre extension cable is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I identify a faulty ClickLoc connector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: If the vibration signal shows high-frequency \"spiking\" or the DC gap voltage is unstable, inspect the miniature coaxial center pin. Ensure the connector protector is not cracked and that no moisture has entered the junction.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318613867,"sku":"330901-00-90-10-01-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330901-00-90-10-01-cn-mir0klbszv1_82935524-d760-4f38-a316-3ff7fe45160e.jpg?v=1765521111"},{"product_id":"bently-nevada-24701-28-05-xx-028-04-xx-mod-323933-00-02-proximity-probe-housing-assembly","title":"Bently Nevada 24701-28-05-XX-028-04-XX MOD 323933-00-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Bently Nevada 24701-28-05-XX-028-04-XX MOD 323933-00-02 is a specialized Proximity Probe Housing Assembly designed for internal mounting applications within the 3300 XL series vibration monitoring systems. This assembly facilitates the secure installation and environmental protection of an 8 mm proximity probe through the machine casing.\u003c\/p\u003e\n\u003cp\u003eConstructed with a 303 stainless steel body and a 304 stainless steel sleeve, the housing is engineered to withstand high-pressure lubricants and corrosive atmospheres common in steam turbines, centrifugal compressors, and industrial gearboxes. This specific configuration includes a 3300 XL 8 mm probe with multiple hazardous area approvals, a 0.5-metre integral cable, and a 2.8-inch probe penetration depth. The \"MOD\" suffix indicates a custom factory modification (323933-00-02) tailored to specific OEM or end-user engineering requirements, ensuring precise alignment with machine internal clearances.\u003c\/p\u003e\n\u003ch3\u003eHardware Configuration\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e24701-28-05-XX-028-04-XX MOD 323933-00-02\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eProximity Probe Housing Assemblies\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e303 Stainless Steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSleeve Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e304 Stainless Steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProbe Option\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm (Multiple Approvals)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProbe Cable Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.5 Metre (20 in)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eProbe Penetration\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.8 inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eStandoff Adapter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNone\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eFittings Option\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOne 3\/4-14 NPT plug only\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModification Info\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMOD 323933-00-02\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.8 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3.0 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eThis assembly is configured according to Bently Nevada standard option codes. Procurement should verify all suffix segments to ensure mechanical compatibility.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eOption Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e24701\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eProximity Probe Housing Assembly Base Model\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-28\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3300 XL 8 mm probe with connector and multiple approvals\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-05\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.5 metre (20 in) probe cable length\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-XX\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNo standoff adapter required\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-028\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.8 inch probe penetration depth\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-04\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOne 3\/4-14 NPT plug\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e-XX\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNo additional options\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eMOD 323933-00-02\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFactory Modified Specification\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Guide\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eProbe Penetration and Air Gap Setting:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2.8-inch penetration depth must be verified against the machine casing thickness and the required standoff from the shaft. Precise air gap adjustment is critical for the linear range of the 3300 XL system. Use a calibrated voltmeter to set the gap voltage (typically -10.0 Vdc for a mid-range gap) before final torquing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSealing and Pressure Integrity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 24701 housing is designed to maintain a seal against machine internal pressure. Ensure the NPT threads are treated with appropriate industrial-grade sealant (e.g., Loctite 567 or equivalent) to prevent oil leakage. Avoid over-torquing the probe within the sleeve, as this can damage the probe tip or the internal threading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable Protection:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 0.5-metre cable segment is susceptible to mechanical damage during installation. All internal wiring should be secured using stainless steel clips to prevent cable whip or fatigue caused by machine vibration. Use flexible conduit for the external portion of the cable run to the Proximitor Sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement Precautions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen replacing an existing housing, ensure the MOD 323933-00-02 specification matches the original installation. Standard 24701 units may lack the specific internal clearances or thread modifications present in this MOD version, potentially leading to mechanical interference or seal failure.\u003c\/p\u003e\n\u003ch3\u003eTroubleshooting FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can a standard 3300 XL probe be used as a replacement within this housing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: While the housing accepts 8 mm probes, the specific probe in this assembly (-28 option) includes multiple approvals and a specialized connector. Always match the probe part number found on the cable tag to ensure electrical compatibility with the Proximitor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I identify the specific modification in MOD 323933-00-02?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: MOD numbers are internal factory records. This modification typically involves non-standard sleeve lengths, specialized thread pitches, or unique material treatments. Refer to your original machine OEM manual or Bently Nevada data sheet for this MOD code.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the significance of the 3\/4-14 NPT plug?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Option -04 provides one plug for unused conduit entries in the housing head. Ensure this is installed and tightened to maintain the IP\/NEMA rating of the assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this housing suitable for high-temperature service?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: The stainless steel construction is rated for high temperatures, but the limit is governed by the 3300 XL probe's specifications. Generally, the probe is rated up to 177°C (350°F).\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318646635,"sku":"323933-00-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/24701-28-05-xx-028-04-xx-mod-323933-00-02-31epxd14pkj_14a9666f-18b1-4087-9b4b-e8db977d8eb0.jpg?v=1765521111"},{"product_id":"330103-00-07-10-12-cn-bently-nevada-3300-xl-8-mm-proximity-probes","title":"330103-00-07-10-12-CN | Bently Nevada | 3300 XL 8 mm Proximity Probes","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 330103-00-07-10-12-CN\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a 3300 XL 8 mm proximity probe designed for precise vibration and shaft displacement monitoring in critical rotating machinery. It is widely applied in turbines, compressors, and refinery pumps where stable signal integrity directly supports machine protection and predictive maintenance strategies.\u003c\/p\u003e\n\u003cp\u003eThis model integrates FluidLoc cable technology, improving resistance against oil contamination and moisture ingress in industrial environments. The compact 70 mm case length supports installations in restricted mounting zones, while maintaining consistent measurement linearity under continuous operation.\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc connector system ensures stable electrical contact in high-vibration conditions, reducing signal instability caused by mechanical loosening.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eElement\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330103\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo unthreaded length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e07\u003c\/td\u003e\n\u003ctd\u003e70 mm overall case length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m total cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003eClickLoc connector with FluidLoc cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCN\u003c\/td\u003e\n\u003ctd\u003eCountry-specific hazardous area approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis configuration defines probe geometry, sealing technology, cable protection level, and compliance classification.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330103-00-07-10-12-CN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.323 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm proximity probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Length\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eFluidLoc sealed cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Material\u003c\/td\u003e\n\u003ctd\u003eAISI 303 \/ 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the advantage of FluidLoc cable?\u003c\/strong\u003e\u003cbr\u003eIt reduces fluid ingress risk and improves reliability in oil-rich environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this probe suitable for turbine applications?\u003c\/strong\u003e\u003cbr\u003eYes. It is commonly used in turbine vibration monitoring systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes CN option affect performance?\u003c\/strong\u003e\u003cbr\u003eNo. It relates to certification and compliance only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it replace standard 3300 XL probes?\u003c\/strong\u003e\u003cbr\u003eYes, if mechanical and electrical configuration matches system requirements.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Engineering Notes\u003c\/h3\u003e\n\u003cp\u003eMaintain correct probe gap calibration to ensure accurate displacement measurement.\u003c\/p\u003e\n\u003cp\u003eAvoid sharp cable bends near connector to preserve shielding integrity.\u003c\/p\u003e\n\u003cp\u003eRoute cables away from high EMI sources to maintain signal stability.\u003c\/p\u003e\n\u003cp\u003eEnsure secure mounting torque to prevent probe drift under vibration load.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eApplication Engineering Guidance\u003c\/h3\u003e\n\u003cp\u003eFluidLoc cable improves performance in oil mist and moisture-prone environments.\u003c\/p\u003e\n\u003cp\u003eThe 70 mm case design allows installation in compact machine housings.\u003c\/p\u003e\n\u003cp\u003eClickLoc connector enhances field reliability under continuous vibration exposure.\u003c\/p\u003e\n\u003cp\u003eSuitable for continuous monitoring in power generation and process industries.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318777707,"sku":"330103-00-07-10-12-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330103-00-07-10-12-cn-d5i5xv1x14b_aaac396f-a25b-4a3b-970a-454f02c85e64.jpg?v=1765521117"},{"product_id":"bently-nevada-330906-02-12-10-02-cn-3300-nsv-reverse-mount-proximity-probe","title":"Bently Nevada 330906-02-12-10-02-CN 3300 NSv Reverse Mount Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 330906-02-12-10-02-CN\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a 3300 NSv reverse mount proximity probe designed for vibration and shaft displacement monitoring in compact rotating machinery. It is typically used in auxiliary turbines, compressors, and pump systems where reverse installation geometry is required due to restricted mounting access.\u003c\/p\u003e\n\u003cp\u003eThe reverse mount design allows installation from the opposite direction of standard probe orientation, improving flexibility in dense mechanical assemblies. The NSv architecture maintains stable signal response in constrained environments while preserving compatibility with Bently Nevada monitoring systems.\u003c\/p\u003e\n\u003cp\u003eThe 1.0 meter cable configuration supports standard routing in industrial control layouts with moderate distance between probe and monitoring module.\u003c\/p\u003e\n\u003cp\u003eCN approval configuration supports deployment in regulated hazardous environments with regional certification requirements.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eElement\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330906\u003c\/td\u003e\n\u003ctd\u003e3300 NSv reverse mount probe series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eConnector\/cable configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003eMechanical case and mounting configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m total cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCN\u003c\/td\u003e\n\u003ctd\u003eCountry-specific hazardous area approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis structure defines mounting direction, installation geometry, cable length, and compliance classification.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330906-02-12-10-02-CN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 1.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e3300 NSv reverse mount proximity probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eShaft vibration and position monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Style\u003c\/td\u003e\n\u003ctd\u003eReverse mount configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproval\u003c\/td\u003e\n\u003ctd\u003eCN hazardous area certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a reverse mount probe used for?\u003c\/strong\u003e\u003cbr\u003eIt is used when standard probe access is blocked or limited by machine structure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with standard NSv systems?\u003c\/strong\u003e\u003cbr\u003eYes. It follows NSv electrical and mechanical interface standards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes reverse mounting affect signal accuracy?\u003c\/strong\u003e\u003cbr\u003eNo. Measurement performance remains unchanged if installation gap is correct.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs CN approval required for all installations?\u003c\/strong\u003e\u003cbr\u003eOnly for hazardous or regulated industrial environments.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation \u0026amp; Field Engineering Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure probe alignment is verified during installation due to reverse mounting geometry.\u003c\/p\u003e\n\u003cp\u003eMaintain proper gap calibration after installation to ensure linear response accuracy.\u003c\/p\u003e\n\u003cp\u003eAvoid cable tension near connector to prevent long-term mechanical stress.\u003c\/p\u003e\n\u003cp\u003eUse proper grounding and shielding to reduce EMI influence in industrial environments.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering Application Guidance\u003c\/h3\u003e\n\u003cp\u003eReverse mount configuration improves installation flexibility in restricted machinery layouts.\u003c\/p\u003e\n\u003cp\u003eNSv design ensures stable vibration measurement in compact rotating equipment.\u003c\/p\u003e\n\u003cp\u003eClickLoc connector improves field reliability under continuous vibration exposure.\u003c\/p\u003e\n\u003cp\u003eSuitable for refinery, power generation, and process industry monitoring systems.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318810475,"sku":"330906-02-12-10-02-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330906-02-12-10-02-cn-wyzxxlhp0hb_98ae2c0b-5cbd-442a-910d-e7e83476e498.jpg?v=1765521119"},{"product_id":"bently-nevada-330902-00-95-05-02-00-3300-nsv-proximity-probe","title":"Bently Nevada 330902-00-95-05-02-00 3300 NSv Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 330902-00-95-05-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a 3300 NSv proximity probe designed for compact machinery vibration and shaft position measurement. It is typically deployed in small rotating equipment such as auxiliary pumps, compressors, and packaged turbine systems where installation space is restricted but monitoring precision remains critical.\u003c\/p\u003e\n\u003cp\u003eThe NSv architecture focuses on compact geometry and stable signal response under constrained mechanical layouts. The 0.5 meter system length supports short-distance routing, reducing cable exposure in dense machine environments. The ClickLoc connector ensures stable electrical contact under continuous vibration conditions.\u003c\/p\u003e\n\u003cp\u003eThis probe is used in condition monitoring systems where early detection of mechanical instability prevents unplanned downtime.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eElement\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330902\u003c\/td\u003e\n\u003ctd\u003e3300 NSv probe series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo unthreaded length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003ctd\u003e9.5 in overall case length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m total length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo agency approval required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis structure defines probe geometry, installation depth, and system connectivity configuration.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330902-00-95-05-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e3300 NSv proximity probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Length\u003c\/td\u003e\n\u003ctd\u003e9.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length\u003c\/td\u003e\n\u003ctd\u003e0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003e1\/4-28 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eCompact rotating machinery monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this probe suitable for small machinery installations?\u003c\/strong\u003e\u003cbr\u003eYes. The NSv series is designed for compact equipment with limited mounting space.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with 3300 XL systems?\u003c\/strong\u003e\u003cbr\u003eIt is designed for NSv architecture. Compatibility depends on system configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the advantage of 0.5 m cable length?\u003c\/strong\u003e\u003cbr\u003eIt reduces signal exposure and improves installation cleanliness in tight panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes ClickLoc improve reliability?\u003c\/strong\u003e\u003cbr\u003eYes. It reduces connector loosening under vibration conditions.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Installation \u0026amp; Engineering Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure correct probe gap calibration during static alignment to stabilize baseline signal output.\u003c\/p\u003e\n\u003cp\u003eAvoid routing cables near high-current conductors to reduce EMI influence on signal quality.\u003c\/p\u003e\n\u003cp\u003eMaintain proper connector locking to prevent micro-disconnections in vibration-heavy environments.\u003c\/p\u003e\n\u003cp\u003eUse strain relief clamps near entry points to reduce mechanical fatigue.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eIndustrial Application Guidance\u003c\/h3\u003e\n\u003cp\u003eThis probe is optimized for compact rotating assets in industrial monitoring systems.\u003c\/p\u003e\n\u003cp\u003eIt provides stable displacement measurement in environments where traditional probe assemblies are too large.\u003c\/p\u003e\n\u003cp\u003eNSv design reduces installation footprint while maintaining vibration detection accuracy.\u003c\/p\u003e\n\u003cp\u003eProper grounding and shielding practices improve long-term signal stability in industrial environments.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318843243,"sku":"330902-00-95-05-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330902-00-95-05-02-00-zzdrhchkw3n_b284c29a-787b-4c07-ba8e-dbd7a8a6687c.jpg?v=1765521121"},{"product_id":"bently-nevada-330191-00-16-10-cn-3300-xl-8-mm-extended-temperature-range-etr-proximity-probes","title":"Bently Nevada 330191-00-16-10-CN | 3300 XL 8 mm Extended Temperature Range (ETR) Proximity Probes","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 330191-00-16-10-CN\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a 3300 XL 8 mm Extended Temperature Range (ETR) proximity probe designed for vibration and shaft displacement monitoring in high-temperature rotating machinery environments. It is commonly applied in turbines, compressors, and refinery pumps where thermal stability and measurement accuracy directly affect machine protection logic.\u003c\/p\u003e\n\u003cp\u003eThe ETR design extends operating capability beyond standard probe temperature limits, ensuring stable signal behavior in hot housing zones and aggressive industrial conditions. The 1.0 meter system length supports standard installation routing in compact machine assemblies.\u003c\/p\u003e\n\u003cp\u003eCN approval marking supports deployment in regulated hazardous areas with compliance requirements such as ATEX, IECEx, and NEPSI.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eConfiguration Interpretation\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eElement\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330191\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm ETR probe series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo unthreaded length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e1.6 in overall case length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m total length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCN\u003c\/td\u003e\n\u003ctd\u003eHazardous area approvals (ATEX \/ IECEx \/ NEPSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis configuration defines probe geometry, installation depth, and compliance classification for industrial safety environments.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330191-00-16-10-CN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm ETR proximity probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003e3\/8-24 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Length\u003c\/td\u003e\n\u003ctd\u003e1.6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Category\u003c\/td\u003e\n\u003ctd\u003eExtended Temperature Range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eATEX, IECEx, NEPSI (CN variant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this probe suitable for high-temperature turbine environments?\u003c\/strong\u003e\u003cbr\u003eYes. The ETR design supports extended thermal operating conditions in rotating machinery zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes CN version change electrical performance?\u003c\/strong\u003e\u003cbr\u003eNo. CN refers to approval and compliance marking only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it replace standard 3300 XL probes?\u003c\/strong\u003e\u003cbr\u003eYes, if mechanical and electrical specifications match system requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this probe compatible with 3300 XL extension cables?\u003c\/strong\u003e\u003cbr\u003eYes. It integrates with standard 3300 XL system architecture.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation \u0026amp; Field Engineering Notes\u003c\/h3\u003e\n\u003cp\u003eMaintain stable probe gap calibration during cold shutdown conditions for repeatable signal accuracy.\u003c\/p\u003e\n\u003cp\u003eAvoid direct contact between probe cable and hot surfaces to prevent insulation degradation.\u003c\/p\u003e\n\u003cp\u003eUse proper strain relief near connector to reduce vibration-induced mechanical stress.\u003c\/p\u003e\n\u003cp\u003eEnsure proper grounding of cable shield to maintain signal integrity in EMI-heavy environments.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering Application Guidance\u003c\/h3\u003e\n\u003cp\u003eThe ETR probe structure is optimized for environments with elevated ambient and housing temperatures.\u003c\/p\u003e\n\u003cp\u003eIt improves signal stability in turbine bearing housings and compressor casings where thermal drift affects standard probes.\u003c\/p\u003e\n\u003cp\u003eMechanical design ensures compatibility with existing 3300 XL installation footprints.\u003c\/p\u003e\n\u003cp\u003eProper installation alignment is critical to avoid phase shift in vibration readings.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318876011,"sku":"330191-00-16-10-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330191-00-16-10-cn-mgpvarytx5x_848cba76-b85f-4aa7-8dd1-63ab04fbe55f.jpg?v=1765521123"},{"product_id":"bently-nevada-330104-00-04-10-02-cn-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330104-00-04-10-02-CN 3300 XL 8 mm Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 330104-00-04-10-02-CN\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a 3300 XL 8 mm proximity probe designed for high-accuracy vibration and shaft position measurement in rotating machinery. It is widely applied in gas turbines, steam turbines, compressors, and critical process pumps where stable displacement monitoring directly affects machine protection and shutdown logic.\u003c\/p\u003e\n\u003cp\u003eThis probe uses a compact 8 mm sensing architecture with a 1.0 meter system length, making it suitable for standard industrial installations requiring balanced reach and rigidity. The ClickLoc connector system improves installation reliability in vibration-prone environments, while stainless steel construction ensures long-term mechanical stability in harsh operating conditions.\u003c\/p\u003e\n\u003cp\u003eThe CN configuration supports region-specific compliance requirements for hazardous industrial environments.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eProbe Configuration Logic\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eElement\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330104\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, 3\/8-24 UNF thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo unthreaded length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e04\u003c\/td\u003e\n\u003ctd\u003e40 mm overall case length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m total system length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eClickLoc connector with standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCN\u003c\/td\u003e\n\u003ctd\u003eCountry-specific approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis structure defines mechanical geometry, cable routing length, and compliance variant for regulated installations.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330104-00-04-10-02-CN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm proximity probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003e3\/8-24 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Material\u003c\/td\u003e\n\u003ctd\u003eStainless steel (AISI 303 \/ 304)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSealing\u003c\/td\u003e\n\u003ctd\u003eViton O-ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this probe compatible with standard 3300 XL systems?\u003c\/strong\u003e\u003cbr\u003eYes. It integrates directly with Bently Nevada 3300 XL monitoring platforms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does CN option mean?\u003c\/strong\u003e\u003cbr\u003eIt indicates country-specific approvals for regulated industrial environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this probe operate in high vibration conditions?\u003c\/strong\u003e\u003cbr\u003eYes. The stainless steel housing and ClickLoc connector improve mechanical stability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the probe suitable for hazardous zones?\u003c\/strong\u003e\u003cbr\u003eYes, when installed under approved system configurations with correct certification chain.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Installation Insights\u003c\/h3\u003e\n\u003cp\u003eEnsure probe gap calibration is performed during machine idle conditions for stable baseline readings.\u003c\/p\u003e\n\u003cp\u003eRoute cables away from high-current power lines to minimize electromagnetic interference.\u003c\/p\u003e\n\u003cp\u003eMaintain minimum bend radius near connector to avoid mechanical stress on coaxial shielding.\u003c\/p\u003e\n\u003cp\u003eTighten mounting hardware to manufacturer torque specification to prevent drift under vibration.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering Notes for Industrial Use\u003c\/h3\u003e\n\u003cp\u003eThis probe is optimized for continuous condition monitoring systems in rotating machinery.\u003c\/p\u003e\n\u003cp\u003eStainless steel casing improves resistance against oil contamination and industrial moisture exposure.\u003c\/p\u003e\n\u003cp\u003eViton sealing ensures stable operation in moderate chemical environments commonly found in refinery and power plant applications.\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc interface reduces installation errors in field wiring operations.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318908779,"sku":"330104-00-04-10-02-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330104-00-04-10-02-cn-02wvqkgdr51_32ca5a0a-ba68-4a79-ae16-efacd1bdf16f.jpg?v=1765521124"},{"product_id":"bently-nevada-330910-00-03-10-02-00-3300-nsv-armored-proximity-probe","title":"Bently Nevada 330910-00-03-10-02-00 3300 NSv Armored Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 330910-00-03-10-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a 3300 NSv proximity probe designed for high-precision shaft vibration and position monitoring in compact industrial rotating machinery. It is commonly used in pumps, compressors, small turbines, and auxiliary equipment where installation space is limited but measurement reliability remains critical.\u003c\/p\u003e\n\u003cp\u003eThis probe uses an M10 x 1 threaded mounting interface and armored cable construction to ensure mechanical protection and stable signal transmission in high-vibration environments. It is part of the NSv series, optimized for narrow-space applications while maintaining full compatibility with Bently Nevada monitoring systems.\u003c\/p\u003e\n\u003cp\u003eThe 1.0 meter total length configuration supports flexible routing in confined machinery layouts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eElement\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330910\u003c\/td\u003e\n\u003ctd\u003e3300 NSv probe series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo unthreaded length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003e30 mm overall case length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m total length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eClickLoc connector with standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo agency approval required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis structure defines probe geometry, installation interface, cable length, and connector configuration.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330910-00-03-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.014 kg to 0.15 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e3300 NSv proximity probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003eM10 x 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArmor\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eVibration and shaft position monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering Interpretation Notes\u003c\/h3\u003e\n\u003cp\u003eThe NSv probe series is designed for compact machinery installations where standard probe geometries cannot be applied.\u003c\/p\u003e\n\u003cp\u003eArmored cable construction improves mechanical durability and reduces risk of damage in high-vibration zones.\u003c\/p\u003e\n\u003cp\u003eClickLoc connector design ensures stable electrical connection and reduces loosening under continuous mechanical stress.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Application Notes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is this probe used?\u003c\/strong\u003e\u003cbr\u003eIt is used in small turbines, pumps, compressors, and compact rotating machinery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose NSv probes?\u003c\/strong\u003e\u003cbr\u003eThey are optimized for tight installation spaces with full monitoring capability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes armor improve reliability?\u003c\/strong\u003e\u003cbr\u003eYes. It provides mechanical protection in vibration-intensive environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with standard Bently Nevada systems?\u003c\/strong\u003e\u003cbr\u003eYes. It integrates with 3300 NSv monitoring architecture.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation \u0026amp; Commissioning Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure correct probe gap setup for accurate linear measurement response.\u003c\/p\u003e\n\u003cp\u003eAvoid sharp bends near connector and armored section to prevent mechanical fatigue.\u003c\/p\u003e\n\u003cp\u003eSecure probe mounting torque according to machine specifications.\u003c\/p\u003e\n\u003cp\u003eMaintain proper grounding of cable shield for signal stability.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Operational Guidance\u003c\/h3\u003e\n\u003cp\u003eUse proper strain relief to prevent connector stress during vibration operation.\u003c\/p\u003e\n\u003cp\u003eInspect armored section periodically for mechanical wear in harsh environments.\u003c\/p\u003e\n\u003cp\u003eMaintain separation from high-power electrical cables to reduce EMI interference.\u003c\/p\u003e\n\u003cp\u003eVerify connector locking during installation to ensure stable signal transmission.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668318974315,"sku":"330910-00-03-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330910-00-03-10-02-00-p0v5efj5lc2_08a8cbe4-e38d-45c1-b2ca-fd6c2d67b418.jpg?v=1765521125"},{"product_id":"bently-nevada-21000-00-00-00-039-03-02-proximity-probe-housing-assemblies","title":"Bently Nevada 21000-00-00-00-039-03-02 Proximity Probe Housing Assemblies","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 21000-00-00-00-039-03-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a proximity probe housing assembly designed for industrial vibration monitoring systems where probe protection and mechanical installation flexibility are required. It is widely applied in turbines, compressors, pumps, and rotating machinery used in power plants, refineries, and heavy process industries.\u003c\/p\u003e\n\u003cp\u003eThis configuration supports installations where the probe and cable are not included, allowing system integrators to select external sensing components based on application requirements. It provides a stable mechanical interface for proximity measurement systems while maintaining environmental protection for the sensing point.\u003c\/p\u003e\n\u003cp\u003eThe housing ensures consistent probe positioning and mechanical isolation, improving measurement stability in vibration and shaft displacement monitoring applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eMechanical Configuration Breakdown\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eElement\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e21000\u003c\/td\u003e\n\u003ctd\u003eProximity probe housing assembly series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eProbe not required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eProbe cable not required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e039\u003c\/td\u003e\n\u003ctd\u003e3.9 in probe penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eNPT fittings with plugs, reducer, and cable sealing grips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT mounting thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis structure defines a probe-less housing configuration intended for flexible sensor system integration.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e21000-00-00-00-039-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eProximity probe housing assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Requirement\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Requirement\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Penetration\u003c\/td\u003e\n\u003ctd\u003e3.9 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eAluminum body with 304 stainless steel sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings\u003c\/td\u003e\n\u003ctd\u003eNPT plug, reducer, cable seal grip set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eVibration monitoring system housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering Interpretation Notes\u003c\/h3\u003e\n\u003cp\u003eThis housing assembly is designed for system-level flexibility, allowing engineers to integrate preferred probe and cable configurations based on machine monitoring requirements.\u003c\/p\u003e\n\u003cp\u003eThe aluminum body provides lightweight structural support, while the stainless steel sleeve enhances corrosion resistance in industrial environments.\u003c\/p\u003e\n\u003cp\u003eCable sealing grips ensure environmental protection across multiple cable diameter ranges, improving installation adaptability.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Application Notes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is this housing used?\u003c\/strong\u003e\u003cbr\u003eIt is used in turbines, compressors, pumps, and industrial rotating machinery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is probe not included?\u003c\/strong\u003e\u003cbr\u003eIt allows flexible selection of probe types based on application design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. It is designed for industrial environments with environmental sealing features.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the advantage of modular configuration?\u003c\/strong\u003e\u003cbr\u003eIt supports customized sensor integration for different monitoring architectures.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation \u0026amp; Commissioning Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure correct NPT thread engagement to maintain housing sealing integrity.\u003c\/p\u003e\n\u003cp\u003eSelect appropriate cable seal grip size to match installed cable diameter.\u003c\/p\u003e\n\u003cp\u003eAvoid mechanical stress on housing during probe alignment procedures.\u003c\/p\u003e\n\u003cp\u003eVerify probe penetration alignment before final tightening of assembly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Operational Guidance\u003c\/h3\u003e\n\u003cp\u003eUse correct sealing components for environmental protection in outdoor installations.\u003c\/p\u003e\n\u003cp\u003eEnsure proper grounding of metallic housing components in electrically noisy environments.\u003c\/p\u003e\n\u003cp\u003eInspect cable seal grips periodically to maintain moisture resistance.\u003c\/p\u003e\n\u003cp\u003eAvoid over-tightening fittings to prevent housing deformation.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668319039851,"sku":"21000-00-00-00-039-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/21000-00-00-00-039-03-02-pdou1k3rmdk_83f53142-2932-44a3-bce4-213e9f7d8337.jpg?v=1765521127"},{"product_id":"bently-nevada-32000-16-05-00-080-03-02-32000-metric-proximity-probe-housing","title":"Bently Nevada 32000-16-05-00-080-03-02 | 32000 Metric Proximity Probe Housing","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 32000-16-05-00-080-03-02\u003c\/strong\u003e is a 32000 metric proximity probe housing designed for rugged industrial vibration monitoring applications. It is widely deployed in turbines, compressors, pumps, and heavy rotating machinery where environmental sealing and mechanical protection are required for stable proximity probe operation.\u003c\/p\u003e\n\u003cp\u003eThis housing integrates a 3300 XL 8 mm probe interface and provides sealed mechanical protection for measurement stability in harsh operating environments. It supports reliable shaft vibration and displacement monitoring in power generation, petrochemical, and heavy process industries.\u003c\/p\u003e\n\u003cp\u003eThe reinforced housing structure ensures long-term durability under high vibration, moisture exposure, and industrial contamination conditions.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eMechanical Configuration Breakdown\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eElement\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e32000\u003c\/td\u003e\n\u003ctd\u003eMetric proximity probe housing series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m probe cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e080\u003c\/td\u003e\n\u003ctd\u003e80 mm probe penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003ctd\u003eM20 fittings with plugs and armored cable grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT mounting thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eEach parameter defines probe interface geometry, penetration depth, and installation hardware configuration for industrial assembly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e32000-16-05-00-080-03-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eMetric proximity probe housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Penetration\u003c\/td\u003e\n\u003ctd\u003e80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP66, Type 4X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Range\u003c\/td\u003e\n\u003ctd\u003e-51 to 105 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eGlass reinforced PPS thermoplastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetal Components\u003c\/td\u003e\n\u003ctd\u003eAISI 304 and AISI 303 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eO-ring Material\u003c\/td\u003e\n\u003ctd\u003eNeoprene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eVibration and shaft position monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering Interpretation Notes\u003c\/h3\u003e\n\u003cp\u003eThe 32000 housing system is engineered for mechanical isolation and environmental sealing of proximity probes in harsh industrial environments.\u003c\/p\u003e\n\u003cp\u003eGlass reinforced PPS material provides high resistance to chemical exposure and mechanical impact, while maintaining dimensional stability under temperature variation.\u003c\/p\u003e\n\u003cp\u003eStainless steel components ensure corrosion resistance in offshore and chemical processing applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Application Notes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is this housing used?\u003c\/strong\u003e\u003cbr\u003eIt is used in turbines, compressors, pumps, and heavy industrial rotating equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor installation?\u003c\/strong\u003e\u003cbr\u003eYes. IP66 and Type 4X ratings support harsh outdoor environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes this housing impact resistant?\u003c\/strong\u003e\u003cbr\u003eCertified structural design allows repeated mechanical impact resistance under extreme temperatures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in hazardous areas?\u003c\/strong\u003e\u003cbr\u003eYes. It meets electrostatic dissipation requirements for hazardous environments.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation \u0026amp; Commissioning Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure correct NPT thread sealing to maintain environmental protection integrity.\u003c\/p\u003e\n\u003cp\u003eVerify probe penetration depth alignment before tightening final assembly.\u003c\/p\u003e\n\u003cp\u003eUse proper torque control during installation to avoid housing stress deformation.\u003c\/p\u003e\n\u003cp\u003eMaintain cable sealing integrity using correct M20 fitting configuration.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Operational Guidance\u003c\/h3\u003e\n\u003cp\u003eAvoid direct mechanical load on housing body during installation.\u003c\/p\u003e\n\u003cp\u003eEnsure grounding continuity for metallic components in hazardous environments.\u003c\/p\u003e\n\u003cp\u003eInspect sealing components periodically in corrosive or offshore environments.\u003c\/p\u003e\n\u003cp\u003eMaintain proper cable strain relief to avoid connector fatigue under vibration.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668319072619,"sku":"32000-16-05-00-080-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/32000-16-05-00-080-03-02-dswb4ne3znn_5643a083-40e0-4665-9c9a-ec00e19744b4.jpg?v=1765521129"},{"product_id":"bently-nevada-330902-00-15-10-02-cn-3300-nsv-proximity-probe","title":"Bently Nevada 330902-00-15-10-02-CN 3300 NSv Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 330902-00-15-10-02-CN\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a 3300 NSv armored proximity probe designed for vibration and shaft position measurement in compact rotating machinery. It is typically applied in small turbines, compressors, and pump systems where installation space is limited but measurement stability remains essential for protection systems.\u003c\/p\u003e\n\u003cp\u003eThe NSv architecture focuses on compact geometry and stable signal output under high vibration conditions. The armored cable construction improves mechanical protection in harsh industrial environments where cable abrasion or impact risk exists.\u003c\/p\u003e\n\u003cp\u003eThis model supports 1.0 meter system length and integrates ClickLoc connector technology for stable electrical contact under continuous operation.\u003c\/p\u003e\n\u003cp\u003eThe CN configuration supports ATEX, IECEx, and NEPSI hazardous area compliance requirements.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eElement\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330902\u003c\/td\u003e\n\u003ctd\u003e3300 NSv probe series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo unthreaded length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e1.5 in overall case length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m total system length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCN\u003c\/td\u003e\n\u003ctd\u003eHazardous area approvals (ATEX \/ IECEx \/ NEPSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis structure defines probe geometry, installation interface, cable system, and compliance classification.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330902-00-15-10-02-CN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e14 g to 150 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e3300 NSv armored proximity probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003e1\/4-28 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Length\u003c\/td\u003e\n\u003ctd\u003e1.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eArmored\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eCompact rotating machinery monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this probe suitable for high vibration equipment?\u003c\/strong\u003e\u003cbr\u003eYes. The NSv design and armored cable improve durability in vibration-heavy environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does CN certification include?\u003c\/strong\u003e\u003cbr\u003eIt includes ATEX, IECEx, and NEPSI hazardous area approvals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in standard 3300 XL systems?\u003c\/strong\u003e\u003cbr\u003eNo. It belongs to NSv architecture and requires compatible system configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the benefit of armored cable?\u003c\/strong\u003e\u003cbr\u003eIt provides mechanical protection against abrasion and impact damage.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Installation Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure correct probe gap calibration during static installation to maintain measurement accuracy.\u003c\/p\u003e\n\u003cp\u003eAvoid sharp cable bends near connector to prevent armor fatigue and internal conductor stress.\u003c\/p\u003e\n\u003cp\u003eRoute cable away from high-current conductors to reduce EMI influence.\u003c\/p\u003e\n\u003cp\u003eSecure mounting to prevent micro-movement under long-term vibration exposure.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eIndustrial Application Guidance\u003c\/h3\u003e\n\u003cp\u003eNSv armored probes are designed for compact rotating machinery requiring robust mechanical protection.\u003c\/p\u003e\n\u003cp\u003eArmored cable improves reliability in oil mist, dust, and mechanical contact risk environments.\u003c\/p\u003e\n\u003cp\u003eClickLoc connector ensures stable signal transmission under continuous industrial vibration.\u003c\/p\u003e\n\u003cp\u003eSuitable for compressor packages, pumps, and small turbine monitoring systems.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668320907627,"sku":"330902-00-15-10-02-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330902-00-15-10-02-cn-qw0htv3mvvg_6b0e0cbe-180f-4a28-bcee-e279b90ad4a0.jpg?v=1765521143"},{"product_id":"bently-nevada-330704-00-05-10-02-cn-3300-xl-11-mm-armored-proximity-probe","title":"Bently Nevada 330704-00-05-10-02-CN 3300 XL 11 mm Armored Proximity Probe","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 330704-00-05-10-02-CN\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a 3300 XL 11 mm armored proximity probe designed for shaft vibration and position monitoring in turbines, compressors, generators, and heavy industrial rotating machinery. It operates within the Bently Nevada 3300 XL eddy-current system and delivers stable displacement signals in harsh mechanical and electrical environments.\u003c\/p\u003e\n\u003cp\u003eThis probe is built for applications requiring enhanced mechanical protection through armored cable construction. It is commonly deployed in refineries, power plants, and offshore installations where vibration, oil exposure, and mechanical abrasion are continuous operating conditions.\u003c\/p\u003e\n\u003cp\u003eThe M14 x 1.5 threaded interface provides secure installation and stable alignment under high vibration loads, ensuring long-term measurement consistency in critical machinery protection systems.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eSegment\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eMeaning\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330704\u003c\/td\u003e\n\u003ctd\u003e3300 XL 11 mm armored probe series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003e0 mm unthreaded length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e5 mm case length option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m system cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eClickLoc connector with standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCN\u003c\/td\u003e\n\u003ctd\u003eCountry-specific approval configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eEach parameter defines probe geometry, cable length, connector type, and regional compliance classification within the 3300 XL probe system.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330704-00-05-10-02-CN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e11 mm armored proximity probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003eM14 x 1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eArmored construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 to 177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSealing Material\u003c\/td\u003e\n\u003ctd\u003eViton O-ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eVibration and shaft position monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering Interpretation Notes\u003c\/h3\u003e\n\u003cp\u003eThe armored cable construction provides additional mechanical protection against abrasion, impact, and installation damage in harsh industrial environments. This improves long-term reliability in high-vibration machinery zones.\u003c\/p\u003e\n\u003cp\u003eThe PPS probe tip material ensures stable dielectric performance under elevated temperature conditions, maintaining linear response in eddy-current measurement systems.\u003c\/p\u003e\n\u003cp\u003eThe stainless steel probe body enhances corrosion resistance and mechanical rigidity, supporting long-term deployment in refinery and offshore applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Application Notes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is this probe used?\u003c\/strong\u003e\u003cbr\u003eIt is used in turbines, compressors, and heavy rotating machinery in industrial plants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the benefit of armored cable?\u003c\/strong\u003e\u003cbr\u003eIt provides mechanical protection against abrasion and external damage in harsh environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with standard 3300 XL systems?\u003c\/strong\u003e\u003cbr\u003eYes. It is fully compatible with Bently Nevada 3300 XL monitoring systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it operate in high-temperature zones?\u003c\/strong\u003e\u003cbr\u003eYes. It supports operation up to 177 deg C.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation \u0026amp; Commissioning Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure correct M14 thread torque during installation to prevent misalignment under vibration stress.\u003c\/p\u003e\n\u003cp\u003eAvoid sharp bending of armored cable to maintain internal conductor integrity.\u003c\/p\u003e\n\u003cp\u003eRoute probe cable away from high-voltage and VFD output wiring to reduce EMI influence.\u003c\/p\u003e\n\u003cp\u003eVerify probe gap calibration before system commissioning to ensure correct signal linearity.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Operational Guidance\u003c\/h3\u003e\n\u003cp\u003eMaintain proper cable routing radius to avoid mechanical fatigue in armored sheath over time.\u003c\/p\u003e\n\u003cp\u003eInspect connector locking mechanism during installation to ensure stable electrical contact.\u003c\/p\u003e\n\u003cp\u003eAvoid mechanical shock during installation to protect probe tip alignment accuracy.\u003c\/p\u003e\n\u003cp\u003ePerform periodic inspection in high-vibration environments to ensure long-term stability of mounting and signal output.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668321071467,"sku":"330704-00-05-10-02-CN","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330704-00-05-10-02-cn-qj3ibpvxrxi_48670bdc-4c6f-4ee7-b1a5-b70f6137f0ca.jpg?v=1765521144"},{"product_id":"bently-nevada-31000-28-05-15-042-06-02-31000-proximity-probe-housings","title":"Bently Nevada 31000-28-05-15-042-06-02 31000 Proximity Probe Housings","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 31000-28-05-15-042-06-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a 31000 series proximity probe housing assembly designed for 3300 XL 8 mm probe integration in hazardous and heavy-duty industrial environments. It is widely used in turbines, compressors, pumps, and refinery rotating equipment where stable probe positioning and environmental sealing directly impact machine protection reliability.\u003c\/p\u003e\n\u003cp\u003eThis housing supports high-integrity vibration and shaft displacement measurement under extreme mechanical stress, chemical exposure, and wide temperature variations. It is engineered for long-term deployment in critical asset monitoring systems where downtime reduction is a primary operational target.\u003c\/p\u003e\n\u003cp\u003eThe reinforced PPS thermoplastic body with conductive fibers provides electrostatic dissipation, while stainless steel structural elements ensure mechanical stability in high-vibration installations.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eSegment\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eMeaning\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e31000\u003c\/td\u003e\n\u003ctd\u003e31000 series proximity probe housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe compatibility with approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m probe cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e1.5 in standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e042\u003c\/td\u003e\n\u003ctd\u003e4.2 in probe penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e06\u003c\/td\u003e\n\u003ctd\u003eMulti-fitting configuration with reducer and plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT mounting thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eEach segment defines probe compatibility, mechanical depth, mounting geometry, and installation flexibility for hazardous area applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e31000-28-05-15-042-06-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eProximity probe housing assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Probe\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandoff Adapter\u003c\/td\u003e\n\u003ctd\u003e1.5 in (38 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Penetration\u003c\/td\u003e\n\u003ctd\u003e4.2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eGlass-reinforced PPS with conductive fibers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetal Components\u003c\/td\u003e\n\u003ctd\u003eAISI 303 \/ 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Material\u003c\/td\u003e\n\u003ctd\u003eNeoprene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Range\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to 105 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP66, Type 4X certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact Resistance\u003c\/td\u003e\n\u003ctd\u003eUp to 7 Joule certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eHazardous area machinery monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering Interpretation Notes\u003c\/h3\u003e\n\u003cp\u003eThis housing is designed for hazardous industrial zones where electrostatic control and mechanical durability are critical. The conductive PPS material dissipates static charge, reducing ignition risk in explosive atmospheres.\u003c\/p\u003e\n\u003cp\u003eStainless steel reinforcement ensures structural integrity under continuous vibration and thermal cycling conditions common in refinery and offshore installations.\u003c\/p\u003e\n\u003cp\u003eThe impact-tested design ensures survivability in harsh industrial environments where accidental mechanical shocks may occur during maintenance or operation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Application Notes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is this housing used?\u003c\/strong\u003e\u003cbr\u003eIt is used in refineries, petrochemical plants, offshore platforms, and heavy industrial rotating equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is PPS material important?\u003c\/strong\u003e\u003cbr\u003eIt provides electrostatic dissipation and chemical resistance in hazardous environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for explosion risk areas?\u003c\/strong\u003e\u003cbr\u003eYes. It is certified for hazardous area operation with appropriate protection ratings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the benefit of stainless steel structure?\u003c\/strong\u003e\u003cbr\u003eIt improves mechanical strength and corrosion resistance in harsh environments.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation \u0026amp; Commissioning Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure correct NPT torque tightening to maintain sealing integrity in hazardous environments.\u003c\/p\u003e\n\u003cp\u003eVerify proper alignment of probe penetration depth before commissioning to maintain measurement accuracy.\u003c\/p\u003e\n\u003cp\u003eUse approved sealing methods for threaded connections to prevent fluid or gas ingress.\u003c\/p\u003e\n\u003cp\u003eAvoid mechanical stress on housing during installation to preserve internal alignment stability.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Operational Guidance\u003c\/h3\u003e\n\u003cp\u003eMaintain proper grounding strategy to ensure electrostatic discharge performance of conductive housing material.\u003c\/p\u003e\n\u003cp\u003eInspect sealing integrity periodically in corrosive environments such as offshore or chemical plants.\u003c\/p\u003e\n\u003cp\u003eAvoid over-tightening fittings to prevent stress fractures in thermoplastic housing structure.\u003c\/p\u003e\n\u003cp\u003eEnsure cable routing avoids high-voltage conductors to reduce EMI influence on measurement signals.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668321104235,"sku":"31000-28-05-15-042-06-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-31000-28-05-15-042-06-02-proximity-probe-housingassemblies-3zmymb5ddzt_41ebb7ce-f875-430f-9688-e40b999cde6e.jpg?v=1765447145"},{"product_id":"bently-nevada-21000-28-10-0-41-04-02-proximity-probe-housing-assembly","title":"Bently Nevada 21000-28-10-0-41-04-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 21000-28-10-0-41-04-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a proximity probe housing assembly designed for secure installation of 3300 XL 8 mm proximity probes in industrial rotating machinery monitoring applications. It is widely applied in turbines, compressors, pumps, and heavy-duty process equipment where stable probe positioning is required for accurate vibration and shaft displacement measurement.\u003c\/p\u003e\n\u003cp\u003eThis housing system provides a rigid mechanical interface between the probe and machine casing, ensuring consistent probe penetration and alignment under continuous vibration and thermal stress. It supports reliable eddy-current signal generation in condition monitoring systems used for asset protection and predictive maintenance.\u003c\/p\u003e\n\u003cp\u003eThe 3\/4-14 NPT mounting interface enables standardized integration into industrial machine housings, supporting both OEM installation and retrofit applications in power generation and process industries.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eSegment\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eMeaning\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e21000\u003c\/td\u003e\n\u003ctd\u003eProximity probe housing assembly platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe option with approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m probe cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e41\u003c\/td\u003e\n\u003ctd\u003eProbe penetration configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e04\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT plug included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT mounting thread option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eEach parameter defines probe compatibility, installation geometry, penetration depth, and mechanical interface configuration within the housing system architecture.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e21000-28-10-0-41-04-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eProximity probe housing assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Probe\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm proximity probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Penetration\u003c\/td\u003e\n\u003ctd\u003e41 configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandoff Adapter\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eVibration and shaft displacement monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering Interpretation Notes\u003c\/h3\u003e\n\u003cp\u003eThis housing assembly ensures fixed mechanical positioning of proximity probes to maintain measurement accuracy in high-vibration industrial environments. It eliminates installation variability caused by mechanical drift, thermal expansion, and housing deformation.\u003c\/p\u003e\n\u003cp\u003eProbe penetration configuration defines the physical depth relationship between probe tip and target surface, which directly affects signal linearity in eddy-current measurement systems.\u003c\/p\u003e\n\u003cp\u003eThe standardized NPT interface simplifies integration into machine housings without requiring custom machining or adapter structures.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Application Notes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is this housing used?\u003c\/strong\u003e\u003cbr\u003eIt is used in turbines, compressors, pumps, and industrial rotating machinery requiring stable probe installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is probe penetration important?\u003c\/strong\u003e\u003cbr\u003eIt ensures correct gap positioning for accurate vibration signal generation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with non-3300 XL probes?\u003c\/strong\u003e\u003cbr\u003eNo. It is designed specifically for Bently Nevada 3300 XL 8 mm probe systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the benefit of NPT mounting?\u003c\/strong\u003e\u003cbr\u003eIt allows standardized and reliable mechanical integration into industrial equipment housings.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation \u0026amp; Commissioning Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure correct torque application during NPT thread installation to prevent misalignment or mechanical stress on housing structure.\u003c\/p\u003e\n\u003cp\u003eVerify probe penetration depth before system commissioning to ensure correct calibration of gap voltage output.\u003c\/p\u003e\n\u003cp\u003eMaintain clean mounting surfaces to avoid debris interference affecting probe alignment and measurement stability.\u003c\/p\u003e\n\u003cp\u003eRoute probe cables away from high-voltage conductors and VFD output lines to minimize electromagnetic interference.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Operational Guidance\u003c\/h3\u003e\n\u003cp\u003eAvoid mechanical impact during installation to preserve probe alignment accuracy and housing integrity.\u003c\/p\u003e\n\u003cp\u003eUse appropriate sealing practices on NPT threads to prevent fluid ingress in turbine and compressor environments.\u003c\/p\u003e\n\u003cp\u003eInspect housing periodically in high-vibration machinery to ensure long-term mechanical stability.\u003c\/p\u003e\n\u003cp\u003eEnsure consistent grounding practices to reduce electrical noise in proximity measurement signals.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668321137003,"sku":"21000-28-10-0-41-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/21000-28-10-0-41-04-02-sx5o0jx4jww_8c8e3708-d83a-4c0f-91b4-f739d7a5557e.jpg?v=1765521146"},{"product_id":"bently-nevada-24701-16-05-00-073-04-02-proximity-probe-housing-assembly","title":"Bently Nevada 24701-16-05-00-073-04-02 Proximity Probe Housing Assembly","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 24701-16-05-00-073-04-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a proximity probe housing assembly designed for secure installation of 3300 XL 8 mm proximity probes in rotating machinery monitoring applications. It is widely applied in turbines, compressors, pumps, and industrial drivetrains where stable probe positioning is required for accurate vibration and shaft displacement measurement.\u003c\/p\u003e\n\u003cp\u003eThis housing assembly provides a mechanically stable interface between the probe and machine casing. It ensures consistent probe penetration depth and alignment, which directly affects signal accuracy in eddy-current measurement systems. The configuration supports harsh industrial environments where vibration, thermal expansion, and mechanical stress are continuous operating conditions.\u003c\/p\u003e\n\u003cp\u003eThe 3\/4-14 NPT mounting interface ensures compatibility with standard industrial threaded ports, making it suitable for both OEM installations and retrofit monitoring upgrades.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eSegment\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eMeaning\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e24701\u003c\/td\u003e\n\u003ctd\u003eProximity probe housing assembly platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003eCompatible 3300 XL 8 mm probe option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m probe cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo standoff adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e073\u003c\/td\u003e\n\u003ctd\u003e7.3 in probe penetration depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e04\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT plug configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT mounting thread option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eEach segment defines probe compatibility, installation geometry, penetration depth, and mechanical interface configuration.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e24701-16-05-00-073-04-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eProximity probe housing assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Probe\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm proximity probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Penetration\u003c\/td\u003e\n\u003ctd\u003e7.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandoff Adapter\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings\u003c\/td\u003e\n\u003ctd\u003eOne 3\/4-14 NPT plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eVibration and shaft displacement monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering Interpretation Notes\u003c\/h3\u003e\n\u003cp\u003eThis housing assembly ensures fixed mechanical positioning of proximity probes in applications where probe stability directly affects measurement accuracy. It is designed to eliminate installation drift caused by vibration or thermal expansion in machinery environments.\u003c\/p\u003e\n\u003cp\u003eThe defined penetration depth standardizes probe positioning relative to the target surface, which is critical for maintaining consistent gap voltage in eddy-current measurement systems.\u003c\/p\u003e\n\u003cp\u003eNPT threaded interface allows direct installation into machine housings without custom adapters, simplifying field deployment and maintenance procedures.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Application Notes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is this housing used?\u003c\/strong\u003e\u003cbr\u003eIt is used in turbines, compressors, and industrial rotating equipment requiring stable proximity probe installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is penetration depth important?\u003c\/strong\u003e\u003cbr\u003eIt ensures correct probe-to-target distance for accurate vibration signal generation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with non-3300 XL probes?\u003c\/strong\u003e\u003cbr\u003eNo. It is designed specifically for Bently Nevada 3300 XL 8 mm probes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the benefit of NPT mounting?\u003c\/strong\u003e\u003cbr\u003eIt provides standardized mechanical integration into industrial equipment housings.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation \u0026amp; Commissioning Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure correct torque application during NPT thread installation to avoid misalignment or mechanical stress on the housing body.\u003c\/p\u003e\n\u003cp\u003eVerify probe penetration depth before commissioning to maintain correct gap calibration in the measurement system.\u003c\/p\u003e\n\u003cp\u003eMaintain clean internal housing surfaces to avoid debris interference with probe alignment and signal accuracy.\u003c\/p\u003e\n\u003cp\u003eRoute probe cable away from high-voltage and VFD wiring to minimize electromagnetic interference.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eEngineering \u0026amp; Operational Guidance\u003c\/h3\u003e\n\u003cp\u003eAvoid mechanical shock during installation, as it may affect probe alignment and penetration accuracy.\u003c\/p\u003e\n\u003cp\u003eUse proper sealing practices on NPT threads to prevent oil or gas ingress in turbine environments.\u003c\/p\u003e\n\u003cp\u003eInspect housing periodically in high-vibration machinery to ensure mechanical stability over long operating cycles.\u003c\/p\u003e\n\u003cp\u003eEnsure consistent grounding practices to reduce electrical noise in proximity measurement signals.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668321202539,"sku":"24701-16-05-00-073-04-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/24701-16-05-00-073-04-02-peopwauugbn_0a2a054b-bea6-489f-ab4d-dc7701387c7d.jpg?v=1765521149"}],"url":"https:\/\/www.plcprotech.com\/collections\/proximity-probes-and-cables.oembed?page=15","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}