{"product_id":"bently-nevada-330101-00-10-05-02-05-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330101-00-10-05-02-05 3300 XL 8 mm Proximity Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330101-00-10-05-02-05\u003c\/strong\u003e is a high-precision \u003cstrong\u003e3300 XL 8 mm proximity probe\u003c\/strong\u003e engineered to deliver reliable non-contact vibration and shaft position measurements in demanding industrial environments. This specific configuration features a fully threaded 1.0-inch case (with 0.0 inches of unthreaded length) and an unarmored, standard 0.5-meter (1.6 feet) triaxial cable terminated with a miniature coaxial ClickLoc connector. Certified under option 05, this probe meets stringent CSA, ATEX, and IECEx requirements, making it ideal for deployment within hazardous environments where explosive gases or dust may be present.\u003c\/p\u003e\n\n\u003cp\u003eOperating on the eddy-current principle, the 3300 XL 8 mm transducer system delivers an exceptionally stable linear voltage output proportional to the distance between the probe tip and the target material, typically AISI 4140 steel. This 0.5-meter probe is designed for continuous machinery protection chains, seamlessly pairing with a 3300 XL extension cable and a matching 330180 series Proximitor sensor. Because this variant features a fully threaded body without unthreaded casing sections, it is highly suited for shallow-depth bearing mounts or flush-bracket configurations where mechanical installation space is highly constrained.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise Eddy-Current Sensing:\u003c\/strong\u003e Features an 8 mm tip diameter optimized for non-contact displacement and dynamic vibration tracking.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFully Threaded Standard Casing:\u003c\/strong\u003e Threaded 3\/8-24 UNF-2A body with 1.0-inch overall case length and 0.0-inch unthreaded length for flush-mount flexibility.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Reliability Coaxial Connector:\u003c\/strong\u003e Equipped with a miniature coaxial ClickLoc connector (option 02) and standard unarmored cable for a low-profile installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHazardous Area Certified:\u003c\/strong\u003e Pre-approved for explosive environments with ATEX, IECEx, and CSA certifications (option 05).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRobust Environmental Construction:\u003c\/strong\u003e High-durability polyphenylene sulfide (PPS) tip and AISI 303\/304 stainless steel case resist chemicals, moisture, and high pressures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eThis proximity probe is typically deployed across critical heavy industry operations, including:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteam and gas turbine shaft vibration, thermal expansion, and axial displacement monitoring.\u003c\/li\u003e\n  \u003cli\u003eHigh-speed centrifugal compressor, expander, and pump rotor protection.\u003c\/li\u003e\n  \u003cli\u003eFluid-film bearing clearance checks and oil-film thickness tracking on utility-scale rotating assets.\u003c\/li\u003e\n  \u003cli\u003eMachinery protection inside hazardous petrochemical plants, refineries, pipelines, and gas processing facilities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption \/ Segment Position\u003c\/th\u003e\n      \u003cth\u003eCode Value on This SKU\u003c\/th\u003e\n      \u003cth\u003eMeaning \/ Configuration Specification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eBase Model\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330101\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm Proximity Probe, 3\/8-24 UNF thread, without armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSegment A: Unthreaded Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e00\u003c\/td\u003e\n      \u003ctd\u003e0.0 in (0 mm) unthreaded length (fully threaded case)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSegment B: Overall Case Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e10\u003c\/td\u003e\n      \u003ctd\u003e1.0 in (25.4 mm) overall case length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSegment C: Total Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003e0.5 meters (1.6 feet) total length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSegment D: Connector \u0026amp; Cable Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSegment E: Agency Approvals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003eCSA, ATEX, and IECEx Approvals (Hazardous Area Rated)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification Parameter\u003c\/th\u003e\n      \u003cth\u003eVerified Value\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330101-00-10-05-02-05\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Diameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e8 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMeasurement Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDynamic vibration, shaft position, and displacement\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOperating Principle\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eEddy current\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3\/8-24 UNF-2A thread\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eArmor Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eNone (unarmored triaxial cable)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eNominal Probe DC Resistance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e7.45 ohms plus\/minus 0.50 ohms (center conductor to outer conductor)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTip Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCase Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAISI 303 or 304 stainless steel (SST)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +177 degC (-62 degF to +350 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePressure Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDesigned to seal differential pressure between tip and case (Viton O-ring)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMaximum Recommended Case Torque\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e11.2 N-m (100 in-lbf)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eStandard Mounting Torque\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e7.5 N-m (66 in-lbf)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMaximum Cable Tensile Strength\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330 N (75 lbf) probe case to probe lead\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMinimum Cable Bend Radius\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e45 mm x 95 mm x 95 mm (H x W x D)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e0.14 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eConnection Type\u003c\/th\u003e\n      \u003cth\u003eComponent Compatibility\u003c\/th\u003e\n      \u003cth\u003eInterconnection Detail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Coaxial Lead\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3300 XL Standard Extension Cable (e.g., 330130 series)\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc connector (option 02, standard coaxial connector with gold-plated brass contacts; finger-tight installation recommended)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCase Mounting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBearing bracket, casing wall, or phenolic bracket (M10x1 or 3\/8-24 UNF)\u003c\/td\u003e\n      \u003ctd\u003e3\/8-24 UNF external threads mated directly to standard machine mounting holes\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eTo ensure precise and maintenance-free measurement loops, adhere to the following standard engineering procedures:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify the target material is AISI 4140 steel, as the standard 3300 XL transducer system is factory-calibrated to this alloy. If using alternative shaft alloys, a custom recalibration of the Proximitor sensor is necessary.\u003c\/li\u003e\n  \u003cli\u003eThread the probe into the mounting bracket or casing wall manually first to prevent cross-threading. Tighten to a standard torque of 7.5 N-m (66 in-lbf) and lock in place using a jam nut.\u003c\/li\u003e\n  \u003cli\u003eEstablish the target probe gap (typically 1.27 mm or 50 mils) by monitoring the DC voltage output from the Proximitor sensor (target gap reads -10 Vdc on a standard calibration curve).\u003c\/li\u003e\n  \u003cli\u003eEnsure the coaxial ClickLoc connectors are kept clean, dry, and free of oil. Moisture or dirt inside the coaxial coupling will result in high-frequency signal noise or measurement drift.\u003c\/li\u003e\n  \u003cli\u003eMaintain a minimum cable bend radius of 25.4 mm (1.0 inch) during final cable dressing and routing inside protective conduit or cable trays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCSA\/cNRTLus:\u003c\/strong\u003e Class I, Zone 0: AEx\/Ex ia IIC T5...T1 Ga; Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III (when installed with approved barriers per drawing 141092).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eATEX\/IECEx:\u003c\/strong\u003e Ex ia IIC T5...T1 Ga, Ex ia IIIC T90C...T280C Dc; EPL Ga and Gc. Ex nA IIC T5...T1 Gc, Ex ec IIC T5...T1 Gc (when installed per non-incendive\/increased safety drawing 140979).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEMC Directive:\u003c\/strong\u003e Compliant with European Union EMC Directive 2014\/30\/EU, standards EN 61000-6-2 (Immunity for Industrial Environments) and EN 61000-6-4 (Emissions).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoHS Directive:\u003c\/strong\u003e Complies with European Directive 2011\/65\/EU for restricted substances.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Safety:\u003c\/strong\u003e SIL 2 certified under standard IEC 61508 (HFT=0); SIL 3 capable with redundant sensor arrays (HFT=1).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666565886315,"sku":"330101-00-10-05-02-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330101-00-10-05-02-05-3300-xl-8-mm-probe-2sf40zlvefn_f03d3dbe-a6b2-4a3c-a7b4-af169784b365.jpg?v=1765440736","url":"https:\/\/www.plcprotech.com\/de\/products\/bently-nevada-330101-00-10-05-02-05-3300-xl-8-mm-proximity-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}