{"product_id":"bently-nevada-330910-05-25-10-02-00-3300-nsv-proximity-probes","title":"Bently Nevada 330910-05-25-10-02-00 3300 NSv Proximity Probes","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eOption 05 (50 mm unthreaded length) and Option 25 (250 mm overall case length) specify this 3300 NSv proximity probe configuration — \u003cstrong\u003e330910-05-25-10-02-00\u003c\/strong\u003e \u003cstrong\u003e3300 NSv proximity probe\u003c\/strong\u003e. This metric-threaded, standard-mount probe features an M10x1 thread style with integrated stainless steel armor, making it suitable for applications with physical or mechanical hazards. It has a 1.0 m (39 in) total cable length terminated with a miniature coaxial ClickLoc connector, and requires no hazardous area agency approvals (Option 00).\u003c\/p\u003e\n\u003cp\u003eThe 330910-05-25-10-02-00 probe is used in restricted-space installations where standard 5 mm or 8 mm systems cannot fit due to small target sizes or minimal side clearances. When used as part of a complete 3300 XL NSv transducer system, which includes a 330980 Proximitor sensor and a 330930 extension cable, it measures non-contact shaft vibration and axial displacement. Its TipLoc molding provides a secure seal between the probe tip and case, while the CableLoc design offers 220 N (50 lb) of pull strength to withstand demanding machinery environments.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOption 05 designates a 50 mm unthreaded length for custom mounting depth configurations.\u003c\/li\u003e\n  \u003cli\u003eOption 25 specifies a 250 mm overall case length with an M10x1 metric thread pattern.\u003c\/li\u003e\n  \u003cli\u003eOption 10 provides a 1.0 meter (39 inches) total cable length for routing directly to an extension cable.\u003c\/li\u003e\n  \u003cli\u003eOption 02 equips a miniature coaxial ClickLoc connector on standard, non-FluidLoc cable.\u003c\/li\u003e\n  \u003cli\u003eOption 00 denotes that agency approval certifications are not required.\u003c\/li\u003e\n  \u003cli\u003eStainless steel armor provides physical protection against impact, abrasion, and debris.\u003c\/li\u003e\n  \u003cli\u003eTipLoc molding technology creates a cohesive, high-strength bond between the PPS probe tip and the brass case.\u003c\/li\u003e\n  \u003cli\u003eCableLoc design delivers up to 220 N (50 lb) of cable pull strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSmall-bore rotating machinery monitoring including high-speed compressors, pumps, and fans.\u003c\/li\u003e\n  \u003cli\u003eAeroderivative gas turbine vibration and axial position measurement.\u003c\/li\u003e\n  \u003cli\u003eHigh-speed machinery with limited target geometry where standard probes encounter cross-talk or side-view limitations.\u003c\/li\u003e\n  \u003cli\u003eTight clearance thrust and radial displacement measurements in general-purpose industrial environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption \/ Segment\u003c\/th\u003e\n      \u003cth\u003eCode on This SKU\u003c\/th\u003e\n      \u003cth\u003eDescription \/ Meaning\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOrderable Part Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003e330910-05-25-10-02-00\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3300 NSv Probe, M10x1 thread, with armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eA - Unthreaded Length Option\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003e50 mm unthreaded length (order in increments of 10 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eB - Overall Case Length Option\u003c\/td\u003e\n      \u003ctd\u003e25\u003c\/td\u003e\n      \u003ctd\u003e250 mm overall case length (order in increments of 10 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eC - Total Length Option\u003c\/td\u003e\n      \u003ctd\u003e10\u003c\/td\u003e\n      \u003ctd\u003e1.0 meter (39 inches) total system probe length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD - Connector and Cable-Type Option\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eE - Agency Approval Option\u003c\/td\u003e\n      \u003ctd\u003e00\u003c\/td\u003e\n      \u003ctd\u003eNo approvals \/ Agency approvals not required\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePart Number \/ Model\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330910-05-25-10-02-00\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3300 NSv Proximity Probe (with armor)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eM10x1 metric thread\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e50 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOverall Case Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e250 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTotal Probe Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1.0 meter (39 inches)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial male ClickLoc connector\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eStandard 75 ohm coaxial cable with integrated stainless steel armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1.5 mm (60 mils), from approximately 0.25 to 1.75 mm (10 to 70 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eRecommended Gap Setting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1.0 mm (40 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAverage Scale Factor (ASF)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIncremental Scale Factor (ISF) Deviation\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e+12.5% \/ -20% over ambient range (0 degC to +45 degC)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDeviation from Best Fit Straight Line (DSL)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eLess than +\/-0.06 mm (+\/-2.3 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e0 to 10 kHz: +0, -3 dB typical (up to 305 m of field wiring)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe DC Resistance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e4.2 +\/- 0.5 ohms (from center conductor to outer shield)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOperating and Storage Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +177 degC (-62 degF to +351 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Pressure Seal\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eViton O-ring differential pressure tip-to-case seal\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCable Pull Strength\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eCableLoc design offering 220 N (50 lb) maximum pull strength\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eArmor Protection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eStainless steel armor (maximum O.D. 7.0 mm uncoated \/ 7.6 mm coated if applicable)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTarget Alignment:\u003c\/strong\u003e Ensure the target size is at least 13 mm (0.5 in) in diameter. Small shaft diameters or target sizes will affect the scale factor; gapping closer may be required to offset this.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProbe Threading:\u003c\/strong\u003e Mount standard-mount probes securely using M10x1 threaded holes. Avoid excessive thread engagement lengths to prevent binding during installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector Protection:\u003c\/strong\u003e Use a connector protector on the probe-to-extension cable connection to prevent oil and liquid ingress. Slide the protector over the connection until it locks into position.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArmor Routing:\u003c\/strong\u003e Route the armored cable carefully to avoid sharp bends. The stainless steel armor prevents mechanical damage but requires a minimum bend radius to protect internal coaxial conductors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem Matching:\u003c\/strong\u003e Verify that the total length of the probe (1.0 m) combined with the extension cable equals the Proximitor sensor's calibrated system length (typically 5.0 m or 7.0 m).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eThis general-purpose configuration is optioned without hazardous area certification requirements (Option 00). It is designed for standard, non-classified industrial environments.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666625098091,"sku":"330910-05-25-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330910-05-25-10-02-00-3300-nsv-proximity-probes-oqlsm0xuzlm_d8ceb9ab-0d18-47b3-9965-93c6d4e706f8.jpg?v=1765444323","url":"https:\/\/www.plcprotech.com\/de\/products\/bently-nevada-330910-05-25-10-02-00-3300-nsv-proximity-probes","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}