{"product_id":"bently-nevada-330930-060-02-05-3300-nsv-extension-cable","title":"Bently Nevada 330930-060-02-05 3300 NSv Extension Cable","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e330930-060-02-05\u003c\/strong\u003e specifies this \u003cstrong\u003e3300 NSv extension cable\u003c\/strong\u003e configured with a 6.0-meter length, stainless steel armor protection without an FEP jacket, and multiple international hazardous area agency approvals. This option combination utilizes robust stainless steel armoring to protect the internal 75-ohm coaxial cable from abrasive wear, mechanical crushing, and environmental impacts while omitting the outer fluoropolymer sheath for installations where extra chemical-washdown protection is unnecessary.\u003c\/p\u003e\n\u003cp\u003eOperating as an intermediate link within the 3300 XL NSv Proximity Transducer System, the cable maintains electrical and mechanical compatibility with Bently Nevada 3300 NSv proximity probes and 330980 Proximitor sensors. The system is optimized for machinery vibration and shaft position measurements in applications with tight target geometries or restricted clearance, such as small-bore rotating equipment and aeroderivative gas turbines.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e6.0-meter (19.7 feet) cable length matching specific calibrated system length configurations.\u003c\/li\u003e\n  \u003cli\u003eStainless steel armor protection (without outer FEP jacket) shielding the inner coaxial line from physical damage and severe industrial wear.\u003c\/li\u003e\n  \u003cli\u003eAgency Approval Option 05 specifying multiple hazardous area certifications, including CSA, ATEX, and IECEx.\u003c\/li\u003e\n  \u003cli\u003eGold-plated brass ClickLoc coaxial connectors providing self-locking mechanics to prevent loosening during operation.\u003c\/li\u003e\n  \u003cli\u003e75-ohm characteristic impedance designed to maintain stable signal transmission without attenuation.\u003c\/li\u003e\n  \u003cli\u003ePatented CableLoc design compatibility withstanding high pulling forces up to 220 N (50 lb) at standard interfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVibration and axial position monitoring in high-speed, small-bore turbocompressors.\u003c\/li\u003e\n  \u003cli\u003eAeroderivative gas turbines and compact rotating machines with limited target geometries.\u003c\/li\u003e\n  \u003cli\u003eIndustrial gearboxes, pumps, and centrifuges requiring mechanical armoring against external physical hazards.\u003c\/li\u003e\n  \u003cli\u003eHazardous-area installations requiring intrinsically safe or non-incendive transducer loops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption Position\u003c\/th\u003e\n      \u003cth\u003eCode on This SKU\u003c\/th\u003e\n      \u003cth\u003eDescription\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOrderable Part Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003e330930-060-02-05\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3300 NSv Extension Cable, Armored\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eA - Cable Length Option\u003c\/td\u003e\n      \u003ctd\u003e060\u003c\/td\u003e\n      \u003ctd\u003e6.0 meters (19.7 feet)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eB - Connector and Cable Option\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003eWith stainless steel armor, without FEP jacket\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eC - Agency Approval Option\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003eMultiple Approvals (including CSA, ATEX, IECEx, and NEPSI certifications)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePart Number \/ Model\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330930-060-02-05\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTransducer System Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3300 XL NSv Proximity Transducer System\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCable Impedance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e75 ohms\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eExtension Cable Capacitance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e69.9 pF\/m (21.3 pF\/ft) typical\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eExtension Cable DC Resistance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eCenter Conductor: 0.220 ohms\/m (0.067 ohms\/ft)\u003cbr\u003eShield: 0.066 ohms\/m (0.020 ohms\/ft)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eGold-plated brass ClickLoc miniature female and male coaxial connectors\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTensile Strength\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e220 N (50 lb) probe lead to extension cable connectors\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMinimum Bend Radius\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOperating and Storage Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +177 degC (-62 degF to +351 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eRelative Humidity\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e100% condensing, non-submersible when connectors are protected\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCable Weight\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e64 g\/m (0.7 oz\/ft) typical for armored cable variants\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eTo maintain correct sensor system calibration, the combined length of the proximity probe and this extension cable must match the calibrated total length of the compatible Proximitor sensor (for example, pairing a 1.0-meter probe with this 6.0-meter extension cable to complete a 7.0-meter system). Ensure a minimum bend radius of 25.4 mm (1.0 in) is maintained along the entire cable path. Connectors must be mated finger-tight, with a maximum allowable connector-to-connector torque of 0.56 Nm (5 in lb). The use of silicone self-fusing tape or a connector protector kit is recommended to prevent fluid ingress at mated joints; however, silicone tape should not be used inside a machinery casing exposed to turbine oil.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eThe Multiple Approvals (05) option complies with major global hazardous area requirements for intrinsic safety, non-incendive, and non-sparking protection concepts. Standards include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eATEX\/IECEx:\u003c\/strong\u003e Ex ia IIC T5...T1 Ga; Ex nA IIC T5...T1 Gc; Ex ec IIC T5...T1 Gc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDust Approvals:\u003c\/strong\u003e Ex ia IIIC T90 degC...T280 degC Dc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCSA:\u003c\/strong\u003e Class I, Division 1, Groups A, B, C, and D; Class II, Groups E, F, G; Class III\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666569458027,"sku":"330930-060-02-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330930-060-02-05-3300-nsv-extension-cable-ecvjlzowudp_59b214f4-5b04-4a77-84a7-a4445f95ea3b.jpg?v=1765440811","url":"https:\/\/www.plcprotech.com\/de\/products\/bently-nevada-330930-060-02-05-3300-nsv-extension-cable","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}