{"product_id":"bently-nevada-330104-01-06-10-02-00-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330104-01-06-10-02-00 3300 XL 8 mm Proximity Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e330104-01-06-10-02-00\u003c\/strong\u003e specifies this metric-threaded \u003cstrong\u003e3300 XL 8 mm proximity probe\u003c\/strong\u003e configuration, which features an M10 x 1 threaded body with integrated stainless steel armor, a 10 mm unthreaded length (Option 01), a 60 mm overall case length (Option 06), a 1.0 meter total length (Option 10), a miniature coaxial ClickLoc connector on standard cable (Option 02), and no hazardous area approvals (Option 00). Unlike unarmored or connector-protected variants, this configuration utilizes flexible stainless steel armor with an outer FEP jacket to prevent mechanical wear and abrasion on the coaxial cable while maintaining standard cable-to-connector clearances.\u003c\/p\u003e\n\u003cp\u003eThis non-contact eddy-current displacement sensor is used in industrial machinery protection systems. It operates as part of a 3300 XL transducer chain to measure static axial shaft position or dynamic shaft vibration on rotating machinery with fluid-film bearings, such as steam turbines, compressors, and generators. When paired with a compatible 3300 XL Proximitor sensor and extension cable, the probe provides a linear sensitivity of 7.87 V\/mm (200 mV\/mil) over a 2.0 mm (80 mils) linear range.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOption 01 specifies a 10 mm unthreaded length on an M10 x 1 threaded case.\u003c\/li\u003e\n  \u003cli\u003eOption 06 defines a 60 mm overall case length made of corrosion-resistant 303 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eOption 10 provides a 1.0 meter total length of 75-ohm coaxial cable with integrated stainless steel armor.\u003c\/li\u003e\n  \u003cli\u003eOption 02 includes a miniature coaxial ClickLoc connector without an external connector protector.\u003c\/li\u003e\n  \u003cli\u003eOption 00 indicates that agency approval is not required.\u003c\/li\u003e\n  \u003cli\u003eIntegrated FEP-jacketed stainless steel armor provides protection against abrasive environments and physical wear.\u003c\/li\u003e\n  \u003cli\u003ePolyphenylene sulfide (PPS) probe tip is rated for harsh chemical and turbine oil environments.\u003c\/li\u003e\n  \u003cli\u003eFully compatible and interchangeable with non-XL 3300 series 5 mm and 8 mm system components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShaft radial vibration and axial position monitoring on fluid-film bearing machines.\u003c\/li\u003e\n  \u003cli\u003eShaft speed and Keyphasor reference measurements.\u003c\/li\u003e\n  \u003cli\u003eMachinery protection systems on steam turbines, gas turbines, centrifugal compressors, and cooling tower fans.\u003c\/li\u003e\n  \u003cli\u003eHydroelectric generators and large industrial electric motors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption Segment\u003c\/th\u003e\n      \u003cth\u003eCode on This SKU\u003c\/th\u003e\n      \u003cth\u003eDescription \/ Meaning\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOrderable Part Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003e330104-01-06-10-02-00\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm proximity probe, M10 x 1 thread, with armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eA - Unthreaded Length\u003c\/td\u003e\n      \u003ctd\u003e01\u003c\/td\u003e\n      \u003ctd\u003e10 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eB - Overall Case Length\u003c\/td\u003e\n      \u003ctd\u003e06\u003c\/td\u003e\n      \u003ctd\u003e60 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eC - Total Length\u003c\/td\u003e\n      \u003ctd\u003e10\u003c\/td\u003e\n      \u003ctd\u003e1.0 meter (3.3 feet)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD - Connector\/Cable\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eE - Agency Approval\u003c\/td\u003e\n      \u003ctd\u003e00\u003c\/td\u003e\n      \u003ctd\u003eNot required\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification Value\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePart Number\u003c\/td\u003e\n      \u003ctd\u003e330104-01-06-10-02-00\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm Proximity Probe, Metric, with Armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread Type\u003c\/td\u003e\n      \u003ctd\u003eM10 x 1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n      \u003ctd\u003e10 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCase Length\u003c\/td\u003e\n      \u003ctd\u003e60 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCable Length\u003c\/td\u003e\n      \u003ctd\u003e1.0 meter (3.3 feet)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConnector Type\u003c\/td\u003e\n      \u003ctd\u003eMiniature male coaxial ClickLoc\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLinear Range\u003c\/td\u003e\n      \u003ctd\u003e2.0 mm (80 mils), starting at 0.25 mm (10 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLinear Sensitivity\u003c\/td\u003e\n      \u003ctd\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n      \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCase Material\u003c\/td\u003e\n      \u003ctd\u003e303 stainless steel (SST)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMechanical Protection\u003c\/td\u003e\n      \u003ctd\u003eStainless steel armor with FEP outer jacket\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Temperature Range\u003c\/td\u003e\n      \u003ctd\u003e-52 to +177 Celsius\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePressure Sealing\u003c\/td\u003e\n      \u003ctd\u003eViton O-ring (probe tip and case)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e150 mm x 150 mm x 30 mm (H x W x D)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.14 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eConnection Point\u003c\/th\u003e\n      \u003cth\u003eFunction\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoaxial Center Conductor\u003c\/td\u003e\n      \u003ctd\u003eSignal path for eddy-current driver circuit\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoaxial Outer Shield\u003c\/td\u003e\n      \u003ctd\u003eCommon return path \/ shielding\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProbe gap must be set using the standard 3300 XL Proximitor sensor output voltage (typically -9 Vdc for radial vibration, corresponding to approximately 1.27 mm or 50 mils gap).\u003c\/li\u003e\n  \u003cli\u003eEnsure the thread engagement of the M10 x 1 case does not exceed 15 mm to avoid binding during installation.\u003c\/li\u003e\n  \u003cli\u003eHand-tighten the miniature coaxial ClickLoc connector to the extension cable; do not use tools unless mating to a non-XL connector.\u003c\/li\u003e\n  \u003cli\u003eMaintain a minimum clearance of 3.0 mm around the probe tip from surrounding metal to prevent side-view interference.\u003c\/li\u003e\n  \u003cli\u003eAvoid pulling the FEP-jacketed armor with excessive tension; keep bend radii above the recommended limit of 25 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCE compliant (EMC Directive)\u003c\/li\u003e\n  \u003cli\u003eRoHS compliant\u003c\/li\u003e\n  \u003cli\u003eWEEE compliant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666850312555,"sku":"330104-01-06-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330104-01-06-10-02-00-proximity-probes-yfewefercju_bfa0e2cb-4056-4fd6-8d0d-910ec25bfc80.jpg?v=1765449024","url":"https:\/\/www.plcprotech.com\/fa\/products\/bently-nevada-330104-01-06-10-02-00-3300-xl-8-mm-proximity-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}