{"product_id":"bently-nevada-330171-00-08-10-02-00-3300-5mm-proximity-probes","title":"پراب‌های نزدیکی بنتلی نوادا 330171-00-08-10-02-00 3300 5 میلی‌متر","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eOption 00 (0.0 in unthreaded length), Option 08 (0.8 in case length), Option 10 (1.0 m total length), and Option 02 (ClickLoc connector without protector) define this specific \u003cstrong\u003e3300 5 mm proximity probe\u003c\/strong\u003e configuration — \u003cstrong\u003e330171-00-08-10-02-00\u003c\/strong\u003e. This non-armored eddy-current displacement sensor is used in tight mechanical spaces where larger 8 mm or 11 mm probes cannot physically fit, such as between thrust bearing pads or within compact machinery housings. Operating on the eddy-current principle, the sensor measures static gap (position) and dynamic motion (vibration) against a conductive AISI 4140 steel target.\u003c\/p\u003e\n\u003cp\u003eThis specific variant features a 1\/4-28 UNF threaded body without protective stainless steel armor. By utilizing a 1.0-meter integrated standard cable terminating in a miniature coaxial ClickLoc connector, this configuration provides direct connection to a 3300 XL extension cable and Proximitor sensor, establishing a complete 5 mm transducer system with an incremental scale factor of 7.87 V\/mm (200 mV\/mil).\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnarmored 1\/4-28 UNF Body:\u003c\/strong\u003e Threaded stainless steel case with no external metal armor braid for standard installations with routing space.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0.0 Inch Unthreaded Length:\u003c\/strong\u003e Fully threaded 0.8-inch case length allows for maximum adjustability within mounting brackets or tapped machine casings.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0-Meter Total Cable Length:\u003c\/strong\u003e Short-run integrated 75-ohm triaxial cable for compact spacing, terminating in a gold-plated ClickLoc connector.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMiniature ClickLoc Connector:\u003c\/strong\u003e Gold-plated brass coaxial connection with a positive-locking mechanism that resists vibration without requiring special tools.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5 mm Tip Diameter:\u003c\/strong\u003e Slim-profile probe tip for space-constrained locations while maintaining a linear range of 2.0 mm (80 mils) comparable to standard 8 mm probes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eTypically used for shaft vibration and axial position measurement on industrial rotating machinery, including:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmall fluid-film bearing machines with constrained interior clearances\u003c\/li\u003e\n  \u003cli\u003eThrust bearing housings with minimal space between pads\u003c\/li\u003e\n  \u003cli\u003eElectric motors, generators, pumps, and high-speed turbomachinery\u003c\/li\u003e\n  \u003cli\u003eKeyphasor phase-reference measurements and speed tracking applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption \/ Segment\u003c\/th\u003e\n      \u003cth\u003eCode on This SKU\u003c\/th\u003e\n      \u003cth\u003eDescription \/ Meaning\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOrderable Part Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330171-00-08-10-02-00\u003c\/td\u003e\n      \u003ctd\u003e3300 5mm Proximity Probe, 1\/4-28 UNF thread, without armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eA - Unthreaded Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e00\u003c\/td\u003e\n      \u003ctd\u003e0.0 in (0.0 mm) unthreaded length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eB - Overall Case Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e08\u003c\/td\u003e\n      \u003ctd\u003e0.8 in (20 mm) case length (order in increments of 0.1 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eC - Total Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e10\u003c\/td\u003e\n      \u003ctd\u003e1.0 meter (3.3 feet) integrated cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eD - Connector Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable (no connector protector)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eE - Agency Approval Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e00\u003c\/td\u003e\n      \u003ctd\u003eAgency Approval Option: Not required\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eValue \/ Specification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel \/ Part Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330171-00-08-10-02-00\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTransducer Tip Diameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e5.2 mm (0.21 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1\/4-28 UNF-2A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eArmor Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eWithout armor (unarmored standard cable)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e2.0 mm (80 mils), begins at approx 0.25 mm (10 mils) from target (from 0.25 to 2.25 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIncremental Scale Factor (ISF)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e7.87 V\/mm (200 mV\/mil) typical\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTarget Material Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAISI 4140 steel (calibrated target by default)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe DC Resistance (Rprobe)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e7.59 ohms +\/- 0.50 ohms (center conductor to outer conductor)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCable Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e75 ohm triaxial, fluoroethylene propylene (FEP) insulated\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnector Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eGold-plated brass or gold-plated beryllium copper\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Tensile Strength\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e222 N (50 lbf) probe case to probe lead\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e0 to 10 kHz: +0, -3 dB (with up to 305 meters of field wiring)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMinimum Target Size\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e15.2 mm (0.6 in) diameter (flat target)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOperating Temperature (Probe)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-35 degC to +177 degC (-31 degF to +351 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Pressure Seal\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSealed with a fluorocarbon O-ring to prevent leakage\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting Hole Preparation:\u003c\/strong\u003e When drilling and tapping a mounting hole for this 1\/4-28 UNF probe, use a #3 or larger tap drill to avoid binding.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Engagement:\u003c\/strong\u003e Maximum thread engagement is per the industry standard of 1.5 times the nominal thread diameter. Avoid over-tightening or excessive thread engagement which can cause binding during installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable Bend Radius:\u003c\/strong\u003e Maintain a minimum cable bend radius of 25.4 mm (1.0 inch) to prevent internal conductor damage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector Torque:\u003c\/strong\u003e ClickLoc connectors must be joined finger-tight until they click. Do not use special tools unless joining with a non-XL stainless steel connector, which requires finger-tight plus 1\/8 turn using pliers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Ensure proper shield grounding of the integrated triaxial cable through the companion extension cable to the Proximitor sensor's common terminal to prevent electrostatic noise interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEMC Directive:\u003c\/strong\u003e EN 61000-6-2, EN 61000-6-4, Directive 2014\/30\/EU\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoHS Directive:\u003c\/strong\u003e 2011\/65\/EU\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaritime:\u003c\/strong\u003e ABS 2009 Steel Vessels Rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666866139499,"sku":"330171-00-08-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330171-00-08-10-02-00-proximity-cable-3sjqbxuhyzs_b82f5746-b9b7-432a-91f3-bb73aa16b21e.jpg?v=1765449455","url":"https:\/\/www.plcprotech.com\/fa\/products\/bently-nevada-330171-00-08-10-02-00-3300-5mm-proximity-probes","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}