{"product_id":"bently-nevada-330909-00-20-10-02-05-3300-nsv-proximity-probe","title":"Bently Nevada 330909-00-20-10-02-05 3300 NSv Proximity Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eSteel probe body with 3\/8-24 UNF thread and integral stainless steel armor (Option 00 unthreaded length, Option 20 case length) defines the \u003cstrong\u003e330909-00-20-10-02-05\u003c\/strong\u003e \u003cstrong\u003e3300 NSv proximity probe\u003c\/strong\u003e. This transducer component is used in the 3300 XL NSv proximity transducer system to measure non-contact static and dynamic displacement in applications with restricted target geometry or tight clearances.\u003c\/p\u003e\n\u003cp\u003eThis configuration incorporates a 1.0 m total length (Option 10) of FEP-insulated coaxial cable protected by flexible AISI 302 stainless steel armor. It terminates in a miniature coaxial ClickLoc connector (Option 02, without connector protector) and includes multiple international hazardous area certifications (Option 05). While standard 3300 XL 8 mm probes require larger targets, the 3300 NSv system is calibrated for smaller shaft diameters and narrow counterbores down to 9.5 mm (0.375 in), resolving cross-talk issues in high-density machine configurations.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreaded Case with Armor: Built with 3\/8-24 UNF-2A threads and flexible AISI 302 stainless steel armor for physical protection in harsh operating environments.\u003c\/li\u003e\n\u003cli\u003eOption 00 Unthreaded: Specifies 0.0 in of unthreaded case length, making the entire 2.0 in (Option 20) case length fully threaded.\u003c\/li\u003e\n\u003cli\u003eOption 10 Cable Length: Includes a 1.0 m (39 in) total probe cable length, designed to match the total system length when combined with a 3300 NSv extension cable.\u003c\/li\u003e\n\u003cli\u003eOption 02 Connector: Equipped with a miniature coaxial ClickLoc connector on a standard coaxial cable without a connector protector.\u003c\/li\u003e\n\u003cli\u003eOption 05 Approvals: Certified under multiple international agencies for hazardous area installations, including CSA, ATEX, and IECEx approvals.\u003c\/li\u003e\n\u003cli\u003eTight-Clearance Target Calibration: Calibrated for reduced target sizes, small-bore machinery, and shaft diameters smaller than 20 mm (0.8 in).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCentrifugal and axial compressors with limited installation space\u003c\/li\u003e\n\u003cli\u003eHigh-speed aeroderivative gas turbines\u003c\/li\u003e\n\u003cli\u003eSmall shaft vibration and axial position measurements under 20 mm (0.8 in) diameter\u003c\/li\u003e\n\u003cli\u003eFluid-film bearing monitoring in small-bore pumps and generators\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable border=\"1\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003eOption\u003c\/th\u003e\n    \u003cth\u003eCode on This SKU\u003c\/th\u003e\n    \u003cth\u003eDescription\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n    \u003ctd\u003e330909-00-20-10-02-05\u003c\/td\u003e\n    \u003ctd\u003e3300 NSv Proximity Probe, 3\/8-24 UNF thread, with stainless steel armor\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eA - Unthreaded Length Option\u003c\/td\u003e\n    \u003ctd\u003e00\u003c\/td\u003e\n    \u003ctd\u003e0.0 in (0 mm) unthreaded length\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eB - Overall Case Length Option\u003c\/td\u003e\n    \u003ctd\u003e20\u003c\/td\u003e\n    \u003ctd\u003e2.0 in (51 mm) case length\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eC - Total Length Option\u003c\/td\u003e\n    \u003ctd\u003e10\u003c\/td\u003e\n    \u003ctd\u003e1.0 meter (39 in) total length\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eD - Connector and Cable-Type Option\u003c\/td\u003e\n    \u003ctd\u003e02\u003c\/td\u003e\n    \u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eE - Agency Approval Option\u003c\/td\u003e\n    \u003ctd\u003e05\u003c\/td\u003e\n    \u003ctd\u003eMultiple Approvals (CSA, ATEX, IECEx)\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable border=\"1\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003eParameter\u003c\/th\u003e\n    \u003cth\u003eValue\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eManufacturer\u003c\/td\u003e\n    \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eModel \/ Part Number\u003c\/td\u003e\n    \u003ctd\u003e330909-00-20-10-02-05\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eSystem Association\u003c\/td\u003e\n    \u003ctd\u003e3300 XL NSv Transducer System\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eThread Size\u003c\/td\u003e\n    \u003ctd\u003e3\/8-24 UNF-2A\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eArmor Type\u003c\/td\u003e\n    \u003ctd\u003eFlexible AISI 302 stainless steel armor\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eUnthreaded Length (Option A)\u003c\/td\u003e\n    \u003ctd\u003e0.0 in (0 mm)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eCase Length (Option B)\u003c\/td\u003e\n    \u003ctd\u003e2.0 in (51 mm)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eTotal Length (Option C)\u003c\/td\u003e\n    \u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eConnector Type (Option D)\u003c\/td\u003e\n    \u003ctd\u003eMiniature coaxial ClickLoc connector (no connector protector)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eCable Type\u003c\/td\u003e\n    \u003ctd\u003e75 ohm coaxial, fluoroethylene propylene (FEP) insulated\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eLinear Range\u003c\/td\u003e\n    \u003ctd\u003e1.5 mm (60 mils), from approximately 0.25 to 1.75 mm (10 to 70 mils)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eRecommended Gap Setting\u003c\/td\u003e\n    \u003ctd\u003e1.0 mm (40 mils)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eIncremental Scale Factor (ISF)\u003c\/td\u003e\n    \u003ctd\u003e7.87 V\/mm (200 mV\/mil) +12.5% \/ -20%\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eDeviation from Best Fit Straight Line (DSL)\u003c\/td\u003e\n    \u003ctd\u003eLess than +\/-0.06 mm (+\/-2.3 mils)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eFrequency Response\u003c\/td\u003e\n    \u003ctd\u003e0 to 10 kHz: +0, -3 dB typical (with up to 305 m of field wiring)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n    \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eProbe Case Material\u003c\/td\u003e\n    \u003ctd\u003eAISI 304 stainless steel (SST)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eTensile Strength\u003c\/td\u003e\n    \u003ctd\u003e220 N (50 lb) max probe case to armor \/ lead\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eOperating Temperature (Probe)\u003c\/td\u003e\n    \u003ctd\u003e-55 degC to +177 degC (-67 degF to +350 degF)\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the probe tip is isolated from nearby metal structures; a minimum target diameter of 8.9 mm (0.35 in) and a recommended counterbore diameter of 13 mm (0.5 in) should be maintained to prevent side-view interference.\u003c\/li\u003e\n\u003cli\u003eAvoid over-torqueing the probe during installation; the maximum rated torque for the 3\/8-24 thread case is 33.9 N-m (300 in-lb), with a recommended installation torque of 11.3 N-m (100 in-lb).\u003c\/li\u003e\n\u003cli\u003eMaintain the minimum bend radius of 25.4 mm (1.0 in) for the armored coaxial cable to prevent internal conductor damage.\u003c\/li\u003e\n\u003cli\u003eEnsure the combined length of the probe cable and the 3300 NSv extension cable equals the total system length calibration of the 3300 XL NSv Proximitor Sensor (either 5.0 m or 7.0 m).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCSA\/NRTL: Class I, Zone 0: AEx\/Ex ia IIC T5...T1 Ga; Class I, Division 1, Groups A, B, C, D; Class II, Groups E, F, G; Class III\u003c\/li\u003e\n\u003cli\u003eATEX\/IECEx: II 1 G Ex ia IIC T5...T1 Ga; II 3 G Ex nA IIC T5...T1 Gc; Ex ec IIC T5...T1 Gc\u003c\/li\u003e\n\u003cli\u003eEMC Directive: 2014\/30\/EU (EN 61000-6-2, EN 61000-6-4)\u003c\/li\u003e\n\u003cli\u003eRoHS Directive: 2011\/65\/EU\u003c\/li\u003e\n\u003cli\u003eFunctional Safety: SIL 2 capable (HFT=0), SIL 3 capable (HFT=1)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666628145515,"sku":"330909-00-20-10-02-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330909-00-20-10-02-05-3300-xl-8-mm-proximity-probes-qavkhsfkdfg_4650201d-3731-4fbd-951c-6a33b326bbb8.jpg?v=1765444360","url":"https:\/\/www.plcprotech.com\/fa\/products\/bently-nevada-330909-00-20-10-02-05-3300-nsv-proximity-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}