{"product_id":"bently-nevada-330102-00-35-05-02-05-3300-xl-8-mm-armored-proximity-probe","title":"Bently Nevada 330102-00-35-05-02-05 3300 XL 8 mm Armored Proximity Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eFully threaded 3\/8-24 UNF steel probe body (Option 00) with 3.5 in case (Option 35) and 0.5 m armored cable (Option 05) defines the \u003cstrong\u003e330102-00-35-05-02-05\u003c\/strong\u003e \u003cstrong\u003e3300 XL 8 mm Proximity Probe\u003c\/strong\u003e configuration. This transducer configuration includes integrated stainless steel protective armor over the coaxial cable and is terminated with a miniature ClickLoc coaxial connector.\u003c\/p\u003e\n\n\u003cp\u003eThis specific configuration differs from non-armored siblings (such as the 330101 series) by utilizing mechanical armor to protect the probe lead from abrasion and physical damage in harsh operating environments. The 0.5-meter total length is intended for short-reach installations or where terminal boxes are situated close to the probe mounting point, connecting directly to a 3300 XL extension cable and Proximitor sensor.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOption 00 specifies an unthreaded body length of 0.0 inches (0 mm), maximizing threaded contact area inside the mounting bracket.\u003c\/li\u003e\n  \u003cli\u003eOption 35 provides a 3.5 inch (88.9 mm) overall case length with 3\/8-24 UNF threads.\u003c\/li\u003e\n  \u003cli\u003eOption 05 establishes a 0.5 meter (1.6 feet) total probe length, reducing excess cable slack in compact machinery housings.\u003c\/li\u003e\n  \u003cli\u003eOption 02 equips the probe with a miniature coaxial ClickLoc connector and standard cable.\u003c\/li\u003e\n  \u003cli\u003eOption 05 provides CSA, ATEX, and IECEx hazardous area approvals.\u003c\/li\u003e\n  \u003cli\u003eProtective stainless steel armor covers the entire length of the probe cable to resist cuts and wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eThis proximity probe is used with rotating machinery for critical machinery protection and condition monitoring. Typical installation environments include steam turbines, gas turbines, centrifugal compressors, expanders, pumps, and electric generators. The transducer system measures dynamic shaft vibration, axial thrust position, speed, and phase reference (Keyphasor) over a linear range of 2.0 mm.\u003c\/p\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption Segment\u003c\/th\u003e\n      \u003cth\u003eCode Value\u003c\/th\u003e\n      \u003cth\u003eMeaning \/ Description\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOrderable Part Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330102-00-35-05-02-05\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm Proximity Probe, 3\/8-24 UNF thread, with armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eA - Unthreaded Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e00\u003c\/td\u003e\n      \u003ctd\u003e0.0 in (0 mm) unthreaded length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eB - Overall Case Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e35\u003c\/td\u003e\n      \u003ctd\u003e3.5 in (88.9 mm) overall case length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eC - Total Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003e0.5 meter (1.6 feet) total length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eD - Connector \u0026amp; Cable-Type Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eE - Agency Approval Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003eCSA, ATEX, IECEx Approvals\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSuffix Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eNone (Not Selected)\u003c\/td\u003e\n      \u003ctd\u003eThe -CN China hazardous area approval package (NEPSI + CCC) is not selected for this standard configuration.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification Value\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330102-00-35-05-02-05\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm Proximity Probe with Armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3\/8-24 UNF-2A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Tip Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Case Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAISI 303 or 304 stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCable Jacket\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFluorinated Ethylene Propylene (FEP) inside flexible stainless steel armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eMiniature male coaxial ClickLoc connector\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e2.0 mm (80 mils), starting at 0.25 mm (10 mils) to 2.3 mm (90 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIncremental Scale Factor (ISF)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e7.87 V\/mm (200 mV\/mil) nominal\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe DC Resistance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e7.45 +\/-0.50 ohms (center conductor to outer shield)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOperating Temperature (Probe)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +177 degC (-62 degF to +350 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Pressure Seal\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eViton O-ring pressure seal between probe tip and case\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e150 mm x 150 mm x 45 mm (H x W x D) (Packaged Probe)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e0.16 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eConnector Component\u003c\/th\u003e\n      \u003cth\u003eElectrical \/ Signal Function\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCenter Conductor\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRF \/ Signal High (Sensor excitation and output)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOuter Shield\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSignal Return \/ Ground Reference\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eTo avoid signal degradation and mechanical binding, observe these guidelines:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFor 3\/8-24 UNF threads, ensure the thread engagement does not exceed 0.563 inches to prevent case binding.\u003c\/li\u003e\n  \u003cli\u003eEnsure gold-plated ClickLoc coaxial connections are made finger tight only. Do not use tools or pliers on standard 3300 XL click connectors.\u003c\/li\u003e\n  \u003cli\u003eMaintain a minimum bend radius of 25.4 mm (1.0 inch) for the armored cable to avoid kinking the internal conductor.\u003c\/li\u003e\n  \u003cli\u003eAlign the probe tip perpendicular to the shaft target area, utilizing standard AISI 4140 steel target calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eFor Option 05 configurations, the probe complies with the following certifications:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCSA:\u003c\/strong\u003e Class I, Zone 0, AEx ia IIC T5...T1 Ga; Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eATEX\/IECEx:\u003c\/strong\u003e Ex ia IIC T5...T1 Ga; Ex ia IIIC T90degC...T280degC Dc; Ex nA IIC T5...T1 Gc; Ex ec IIC T5...T1 Gc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoHS:\u003c\/strong\u003e Compliant with European Directive 2011\/65\/EU and China RoHS regulations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuffix -CN:\u003c\/strong\u003e NEPSI + CCC (China hazardous area approvals) apply only to configurations ordered with the -CN suffix (not selected for this configuration).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666577584491,"sku":"330102-00-35-05-02-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330102-00-35-05-02-05-3300-xl-8mm-industrial-probe-5nvqjsp103b_0f8a25e9-7d60-4f44-8e73-6185ebbafe3f.jpg?v=1765440927","url":"https:\/\/www.plcprotech.com\/fr\/products\/bently-nevada-330102-00-35-05-02-05-3300-xl-8-mm-armored-proximity-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}