{"product_id":"bently-nevada-330103-17-22-10-12-05-3300-xl-8-mm-proximity-probe","title":"Sonde de proximité 8 mm Bently Nevada 330103-17-22-10-12-05 3300 XL","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330103-17-22-10-12-05\u003c\/strong\u003e base model \u003cstrong\u003e330103\u003c\/strong\u003e is a non-contacting eddy-current sensor that generates a high-frequency electromagnetic field to convert physical distances into proportional electrical impedance shifts for static gap and dynamic vibration monitoring. This proximity probe interfaces directly with a matching 3300 XL Proximitor sensor to condition field measurements into a linear voltage output signal suitable for machine protection systems.\u003c\/p\u003e\n\u003ch3\u003eTechnical Summary\u003c\/h3\u003e\n\u003cp\u003eThe probe operates via eddy-current scaling principles where a high-frequency RF field emitted from the tip induces eddy currents when interacting with a conductive target. The proximity probe circuit experiences an impedance shift relative to the proximity of the target surface. The 3300 XL Proximitor sensor translates this continuous change into a linear voltage signal calibrated for rotor dynamics and shaft vibration analysis.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003e330103-17-22-10-12-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003eProximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003e\u003cstrong\u003eSeries\/Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003e-51 degC to +177 degC (-60 degF to +350 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003e\u003cstrong\u003eSignal Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003eLinear voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"8\"\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"8\"\u003e2.0 mm (80 mils), starting at approximately 0.25 mm (10 mils) from the probe tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"9\"\u003e\u003cstrong\u003eScale Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"9\"\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"10\"\u003e\u003cstrong\u003eMounting Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"10\"\u003eM10 x 1 metric thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngineering Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Length Tuning:\u003c\/strong\u003e The 1.0 m total length of this probe requires an additional 4.0 m extension cable to achieve the standard 5.0 m system tuning requirement for precise Proximitor sensor calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTarget Material Calibration:\u003c\/strong\u003e Factory calibration is executed specifically for AISI 4140 steel. Alternative target materials alter eddy-current scaling and necessitate corrective variables or dedicated recalibration due to variations in magnetic permeability and electrical conductivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Target Dimensions:\u003c\/strong\u003e The observed target surface must present a continuous diameter of at least 15.2 mm (0.6 in) to mitigate edge effects that compromise measurement linearity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTightening Torque:\u003c\/strong\u003e Limit torque to a maximum of 4.7 N-m (42 in-lb) during thread installation into the machine casing to prevent mechanical deformation or structural failure of the probe tip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread and Side Clearance:\u003c\/strong\u003e Maintain a minimum lateral clearance of 22 mm from any surrounding counterbore or metallic sidewalls to eliminate parasitic calibration shifts and signal cross-talk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding and Insulation:\u003c\/strong\u003e Wrap the miniature coaxial ClickLoc connectors with the supplied silicone self-insulation tape. This isolates the coaxial shield grounding from the machine ground and prevents internal fluid ingress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing and Bend Radius:\u003c\/strong\u003e Route the fluid-resistant cable ensuring a minimum bend radius of 25.4 mm (1.0 in) to protect the internal dielectric layers from physical fatigue or fracturing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e17:\u003c\/strong\u003e 17 mm unthreaded length for depth positioning control inside the machine housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22:\u003c\/strong\u003e 22 mm overall case length providing low-profile dimensions for clearance constraint zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10:\u003c\/strong\u003e 1.0 m (3.3 ft) total cable length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12:\u003c\/strong\u003e Miniature coaxial ClickLoc connector with integrated fluid-resistant cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e05:\u003c\/strong\u003e ATEX, IECEx, and CSA intrinsic safety and non-incendive certifications for hazardous locations (Zone 0, Zone 1, and Zone 2 applications).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666638795115,"sku":"330103-17-22-10-12-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada330103-17-22-10-12-05-3300-xl-8-mm-probes-bxomorefi1r_31a372c1-6b96-4651-acf0-8817c6be8987.jpg?v=1765444523","url":"https:\/\/www.plcprotech.com\/fr\/products\/bently-nevada-330103-17-22-10-12-05-3300-xl-8-mm-proximity-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}