{"product_id":"bently-nevada-330851-02-000-060-50-00-05-3300-xl-25-mm-proximity-probe","title":"Bently Nevada 330851-02-000-060-50-00-05 3300 XL Sonde de proximité 25 mm","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e330851-02-000-060-50-00-05\u003c\/strong\u003e: 3300 XL 25 mm proximity probe with M30x2 metric thread (Option 02), 0.0 mm unthreaded length (Option 000), 60 mm overall case length (Option 060), 5.0 metres total length (Option 50), non-armored FluidLoc cable (Option 00), and multiple approvals (Option 05).\u003c\/p\u003e\n\u003cp\u003eThis metric threaded eddy-current sensor is part of the 3300 XL 25 mm Proximity Transducer System and measures large-target physical displacement on rotating machinery. Unlike English 1-1\/2-12 thread variants (Option 01), this probe is configured with an M30x2 metric thread case for installation in metric threaded machinery ports. The 25 mm probe tip is double-sealed with both front and rear seals, working in tandem with the perfluoroalkoxyethylene (PFA) insulated FluidLoc coaxial cable to resist moisture, oil, and chemical intrusion. The 5.0-metre system length (Option 50) connects directly to a 5.0-metre Proximitor sensor, eliminating the requirement for an intermediate extension cable in standard installations.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOption 02 metric M30x2 thread case constructed from corrosion-resistant AISI 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003eOption 000 fully threaded case with 0.0 mm unthreaded length for maximum thread engagement in shallow or deep ports.\u003c\/li\u003e\n\u003cli\u003eOption 060 overall case length of 60 mm to facilitate optimal positioning of the probe tip.\u003c\/li\u003e\n\u003cli\u003eOption 50 total system length (5.0 metres) of perfluoroalkoxyethylene (PFA) insulated triaxial FluidLoc coaxial cable.\u003c\/li\u003e\n\u003cli\u003eOption 00 non-armored cable configuration with standard FluidLoc seal to block moisture ingress.\u003c\/li\u003e\n\u003cli\u003eOption 05 multiple approvals package covering hazardous area certifications from ATEX, IECEx, and CSA.\u003c\/li\u003e\n\u003cli\u003eClickLoc miniature coaxial connectors with gold-plated brass and gold-plated beryllium copper contacts.\u003c\/li\u003e\n\u003cli\u003eInterchangeable removable nut design on the ClickLoc connector simplifies routing through tight conduit and clearances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eTypical applications include differential expansion (DE) measurements on mid-size to large steam turbine generators, rotor axial position monitoring, thrust position tracking, large shaft target displacement analysis, and industrial machinery protection in hazardous power generation and petrochemical environments.\u003c\/p\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e330851-02-000-060-50-00-05\u003c\/td\u003e\n\u003ctd\u003e3300 XL 25 mm Proximity Probe, M30x2 thread case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Probe Case Type Option\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eM30x2 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Unthreaded Length Option\u003c\/td\u003e\n\u003ctd\u003e000\u003c\/td\u003e\n\u003ctd\u003e0.0 mm (fully threaded case)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Overall Case Length Option\u003c\/td\u003e\n\u003ctd\u003e060\u003c\/td\u003e\n\u003ctd\u003e60 mm overall case length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Total Length Option\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e5.0 metres (16.4 feet) total system length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE - Armor Option\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eNo Armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF - Agency Approval Option\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003eMultiple Approvals (including ATEX, IECEx, CSA, NEPSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification Value\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e330851-02-000-060-50-00-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransducer Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 25 mm Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Measurement Range\u003c\/td\u003e\n\u003ctd\u003e12.7 mm (500 mils), beginning at approximately 0.63 mm (25 mils) from target\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Output Sensitivity\u003c\/td\u003e\n\u003ctd\u003e0.787 V\/mm (20 mV\/mil) Average Scale Factor (ASF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeviation from Best Fit Straight Line (DSL)\u003c\/td\u003e\n\u003ctd\u003eLess than +\/-0.31 mm (+\/-12 mils) under standard temperature range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e0 to 2.7 kHz (+0, -3 dB typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Minimum Target Size\u003c\/td\u003e\n\u003ctd\u003e61 mm (2.4 in) diameter flat target\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyetheretherketone (PEEK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocknut Hex Wrench Size\u003c\/td\u003e\n\u003ctd\u003e27 mm wrench flats (supplied with M30x2 thread probe)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003e75 ohm triaxial, PFA insulated FluidLoc cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Material\u003c\/td\u003e\n\u003ctd\u003eGold-plated brass and gold-plated beryllium copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Cable Bend Radius\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength (Maximum Rated)\u003c\/td\u003e\n\u003ctd\u003e330 N (75 pounds) probe case to probe lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Locknut Torque\u003c\/td\u003e\n\u003ctd\u003e68 N-m (50 ft-lb) recommended; 163 N-m (120 ft-lb) maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector-to-Connector Torque\u003c\/td\u003e\n\u003ctd\u003eFinger tight recommended; 0.565 N-m (5 in-lb) maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Temperature Range (Operating\/Storage)\u003c\/td\u003e\n\u003ctd\u003e-35 degC to +200 degC (-31 degF to +392 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShort Term Operating Temperature Limit\u003c\/td\u003e\n\u003ctd\u003e+250 degC (482 degF) maximum for less than 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity Limits\u003c\/td\u003e\n\u003ctd\u003e100% condensing, non-submersible with protected connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMaintain a minimum bend radius of 25.4 mm (1.0 in) along all sections of the triaxial coaxial cable to prevent electrical degradation. Tighten the metric M30x2 probe case nuts to the recommended installation torque of 68 N-m (50 ft-lb), not exceeding the maximum rated limit of 163 N-m (120 ft-lb). Secure the standard locknut using safety wire through the predrilled safety holes to mitigate loosening under heavy mechanical vibration. Always route the probe leads through dedicated conduits and avoid parallel proximity to high-voltage AC cabling to avoid electromagnetic noise. Apply the supplied fluorosilicone connector protectors during final assembly to shield the ClickLoc connections from process fluids, oil, and humidity.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCertification Standard\u003c\/th\u003e\n\u003cth\u003eDetails and Ratings\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCE Mark\u003c\/td\u003e\n\u003ctd\u003eComplies with European RFI\/EMI immunity requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntrinsically Safe (Option 05)\u003c\/td\u003e\n\u003ctd\u003eATEX\/IECEx Ex ia IIC T5...T1 Ga; Class I Zone 0 AEx\/Ex ia IIC T5...T1 Ga\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNon-Incendive \/ Division 2\u003c\/td\u003e\n\u003ctd\u003eClass I Division 2 Groups A, B, C, D; Ex nA\/ec IIC T5...T1 Gc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRegional Certifications\u003c\/td\u003e\n\u003ctd\u003eCSA, ATEX, IECEx, NEPSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666856866155,"sku":"330851-02-000-060-50-00-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330851-02-000-060-50-00-05-3300-xl-25-mm-proximity-probe-ifl3lhjdiby_40ef8f10-62e7-45a3-a291-b3e7d176f47c.jpg?v=1765449200","url":"https:\/\/www.plcprotech.com\/fr\/products\/bently-nevada-330851-02-000-060-50-00-05-3300-xl-25-mm-proximity-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}