{"product_id":"bently-nevada-330907-05-30-05-02-05-3300-nsv-reverse-mount-probe","title":"Bently Nevada 330907-05-30-05-02-05 3300 NSv Reverse Mount Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eOption 05 (5.0 mm unthreaded length) and Option 30 (30 mm case length) specify this metric M10x1 threaded configuration — \u003cstrong\u003e330907-05-30-05-02-05\u003c\/strong\u003e, a 3300 NSv \u003cstrong\u003ereverse mount proximity probe\u003c\/strong\u003e. This non-contact eddy-current displacement sensor is designed specifically for tight clearances and reduced target areas in high-speed rotating machinery, offering an average scale factor of 7.87 V\/mm (200 mV\/mil) over a 1.5 mm (60 mils) linear range. Because it is a reverse-mount model, it is designed to be installed from the rear side of a machine housing or bulkhead, making it ideal for small-bore applications, aeroderivative gas turbines, and installations where access to the target area is highly restricted.\u003c\/p\u003e\n\n\u003cp\u003eUnlike standard-mount 3300 NSv probes (such as the 330905) which thread from the front and support protective armor, this reverse-mount configuration does not support armor or connector protectors. It comes equipped with a 0.5-meter (20 inches) standard unarmored FEP-insulated coaxial cable and a miniature coaxial ClickLoc connector. Certified under Option 05 for hazardous area approvals, this probe is fully compatible with the 330980 Proximitor Sensor and 330930 extension cables to form a complete 5-meter or 7-meter transducer system.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eM10x1 threaded probe body made of AISI 304 stainless steel with a high-durability polyphenylene sulfide (PPS) tip.\u003c\/li\u003e\n  \u003cli\u003eOption 05 unthreaded length provides a 5.0 mm unthreaded segment to fit specific machine bulkhead mounting envelopes.\u003c\/li\u003e\n  \u003cli\u003eOption 30 case length provides a compact 30 mm overall case length designed for reverse-mount insertion.\u003c\/li\u003e\n  \u003cli\u003eOption 05 total length provides a 0.5-meter (20 inches) FEP-insulated coaxial probe cable with 75-ohm impedance.\u003c\/li\u003e\n  \u003cli\u003eOption 02 connector comes terminated with a miniature male coaxial ClickLoc connector for secure, twist-locking connection.\u003c\/li\u003e\n  \u003cli\u003eOption 05 agency approval includes multiple international approvals (CSA, ATEX, IECEx) for intrinsically safe installations.\u003c\/li\u003e\n  \u003cli\u003eClickLoc connectors are gold-plated brass to resist corrosion and maintain solid contact in high-vibration industrial environments.\u003c\/li\u003e\n  \u003cli\u003eTipLoc molding process creates a molecular bond between the PPS tip and the stainless steel case, preventing separation.\u003c\/li\u003e\n  \u003cli\u003eCableLoc design provides up to 220 N (50 lb) of pull-strength resistance at the probe-to-cable junction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShaft vibration and axial position measurements in small-bore machinery.\u003c\/li\u003e\n  \u003cli\u003eAeroderivative gas turbines and auxiliary equipment where target geometry is limited.\u003c\/li\u003e\n  \u003cli\u003eHigh-speed compressors, pumps, and gearboxes with tight clearance envelopes.\u003c\/li\u003e\n  \u003cli\u003eRestricted-access retrofits where front-access standard probe installation is impossible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption \/ Segment\u003c\/th\u003e\n      \u003cth\u003eCode on This SKU\u003c\/th\u003e\n      \u003cth\u003eDescription\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOrderable Part Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330907-05-30-05-02-05\u003c\/td\u003e\n      \u003ctd\u003e3300 NSv Reverse Mount Probe, M10X1 threads\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eA - Unthreaded Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003e5.0 mm (0.20 in) unthreaded length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eB - Overall Case Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e30\u003c\/td\u003e\n      \u003ctd\u003e30 mm (1.18 in) overall case length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eC - Total Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003e0.5 meter (20 in) probe cable length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eD - Connector Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable (no armor)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eE - Agency Approval\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003eMultiple Approvals (CSA, ATEX, IECEx) for hazardous areas\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330907-05-30-05-02-05\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSystem Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3300 XL NSv Proximity Transducer System\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTarget Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAISI 4140 steel (standard calibration)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eThread Size\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eM10x1 metric thread\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eReverse Mount\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCase Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e30 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTotal Probe Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e0.5 meter (20 inches)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Tip Diameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e5.26 mm (0.207 in) maximum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Case Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAISI 304 stainless steel (SST)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Tip Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Cable Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e75-ohm coaxial, fluoroethylene propylene (FEP) insulated\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCable Pull Strength\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e220 N (50 lb) maximum rated probe-to-cable pull strength\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnector Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eGold-plated brass ClickLoc connector\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1.5 mm (60 mils), beginning at approximately 0.25 mm (10 mils) from target\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAverage Scale Factor (ASF)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eRecommended Gap\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1.0 mm (40 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOperating and Storage Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +177 degC (-62 degF to +351 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePressure Seal\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eViton O-ring (designed to seal differential pressure between tip and case)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eHumidity Resistance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e100% condensing, non-submersible (when connectors are protected)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e0 to 10 kHz: +0, -3 dB typical with up to 305 m of field wiring\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eFunctional Safety\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSIL 2 (HFT = 0), SIL 3 (HFT = 1) capable\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Engagement:\u003c\/strong\u003e Reverse-mount probes must be threaded carefully from the rear of the bracket or bulkhead. Maximum recommended thread engagement for M10x1 threads is 15 mm.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTorque Specifications:\u003c\/strong\u003e For M10x1 reverse-mount probe cases, the recommended installation torque is 7.5 N-m (66 in-lb), with a maximum rated torque of 22.6 N-m (200 in-lb).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable Bend Radius:\u003c\/strong\u003e Observe the minimum bend radius of 25.4 mm (1.0 inch) for the FEP-insulated coaxial cable to prevent shielding degradation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector Handling:\u003c\/strong\u003e Clean connectors with a lint-free swab and isopropyl alcohol before mating. Connection should be finger tight; maximum recommended mating torque is 0.56 N-m (5 in-lb) to prevent damage to the miniature coaxial ClickLoc threads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Ensure the transducer system is grounded properly through the monitor backplane. The probe shield is isolated from the case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eATEX\/IECEx:\u003c\/strong\u003e Ex ia IIC T5...T1 Ga \/ Ex ia IIIC T90C...T280C Dc \/ Ex nA IIC T5...T1 Gc \/ Ex ec IIC T5...T1 Gc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCSA\/NRTL:\u003c\/strong\u003e Class I, Zone 0, Class I, Div 1, Groups A, B, C, D; Class I, Div 2, Groups A, B, C, D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCE Mark:\u003c\/strong\u003e Compliant with EMC Directive 2014\/30\/EU and RoHS Directive 2011\/65\/EU\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChina RoHS:\u003c\/strong\u003e 15-year Environment-Friendly Use Period (EFUP)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666759840107,"sku":"330907-05-30-05-02-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330907-05-30-05-02-05-3300-nsv-reverse-mount-probe-kht2xpjq5nk_b55aaee6-cdc6-44d6-9d4c-7abe88d0d34a.jpg?v=1765447110","url":"https:\/\/www.plcprotech.com\/fr\/products\/bently-nevada-330907-05-30-05-02-05-3300-nsv-reverse-mount-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}