{"product_id":"bently-nevada-330930-060-01-05-3300-nsv-extension-cable","title":"Bently Nevada 330930-060-01-05 3300 NSv Extension Cable","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eCable Option 060 (6.0 meters length), Option 01 (stainless steel armor with FEP jacket), and Option 05 (multiple agency approvals) define the specific configuration of this \u003cstrong\u003e3300 NSv Extension Cable\u003c\/strong\u003e — \u003cstrong\u003e330930-060-01-05\u003c\/strong\u003e. This cable is designed to connect a 3300 NSv proximity probe to a 3300 XL NSv Proximitor Sensor, ensuring matching electrical length for tight-clearance and small-bore machine monitoring applications.\u003c\/p\u003e\n\n\u003cp\u003eUnlike unarmored versions (Option 00) or uncoated armored versions (Option 02), this FEP-jacketed armored extension cable provides robust mechanical protection against physical abrasion and chemical resistance in harsh industrial environments. The 6.0 m length must be selected so that the combined length of the extension cable and the probe matches the required 5.0 m or 7.0 m system calibration of the corresponding Proximitor Sensor.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOption 060 specifies a total cable length of 6.0 meters (19.7 feet).\u003c\/li\u003e\n  \u003cli\u003eOption 01 provides flexible stainless steel armor with a protective FEP outer jacket to prevent moisture and chemical ingress.\u003c\/li\u003e\n  \u003cli\u003eOption 05 includes multiple international hazardous area certifications (CSA, ATEX, IECEx, NEPSI) for intrinsically safe and non-incendive environments.\u003c\/li\u003e\n  \u003cli\u003e75 ohm coaxial cable design ensures low signal attenuation and precise high-frequency response.\u003c\/li\u003e\n  \u003cli\u003eMiniature coaxial ClickLoc connectors on both ends offer secure, vibration-resistant coupling without special tools.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 3300 NSv standard and reverse mount proximity probes and 3300 XL NSv Proximitor Sensors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eThis extension cable is used in machinery protection systems to monitor shaft vibration and axial position in the following scenarios:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmall-bore machinery and high-speed equipment with limited target clearance and small target geometry.\u003c\/li\u003e\n  \u003cli\u003eAeroderivative gas turbine installations where tight structural spaces require high-accuracy eddy-current transducers.\u003c\/li\u003e\n  \u003cli\u003eCentrifugal compressors, pumps, and fans operating in industrial manufacturing facilities.\u003c\/li\u003e\n  \u003cli\u003eHydrocarbon processing, oil and gas production, and petrochemical plants requiring robust, armored, and certified instrumentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption \/ Segment\u003c\/th\u003e\n      \u003cth\u003eCode on This SKU\u003c\/th\u003e\n      \u003cth\u003eDescription\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOrderable Part Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003e330930-060-01-05\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3300 NSv Extension Cable, 6.0 meters, armored with FEP jacket, multiple approvals\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eA - Cable Length Option\u003c\/td\u003e\n      \u003ctd\u003e060\u003c\/td\u003e\n      \u003ctd\u003e6.0 meters (19.7 feet)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eB - Connector and Cable Option\u003c\/td\u003e\n      \u003ctd\u003e01\u003c\/td\u003e\n      \u003ctd\u003eWith stainless steel armor, with FEP jacket\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eC - Agency Approval Option\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003eMultiple Approvals (including CSA, ATEX, IECEx, NEPSI)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330930-060-01-05\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSystem Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3300 XL NSv Proximity Transducer System\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCable Impedance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e75 ohm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCable Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e6.0 meters (19.7 feet)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eArmor Protection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFlexible stainless steel armor with FEP outer jacket\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMaximum Armor O.D.\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e7.6 mm (0.30 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMaximum Coaxial Cable O.D.\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e2.80 mm (0.11 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCenter Conductor Resistance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e0.220 ohm\/m (0.067 ohm\/ft)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eShield Resistance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e0.066 ohm\/m (0.020 ohm\/ft)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCable Capacitance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e69.9 pF\/m (21.3 pF\/ft) typical\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMinimum Bend Radius\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOperating and Storage Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +177 degC (-62 degF to +351 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eRelative Humidity\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e100% condensing, non-submersible when connectors are protected\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnector Torque\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFinger tight recommended; maximum torque 0.56 N m (5 in lb)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCable Weight\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e64 g\/m (0.7 oz\/ft) typical\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eConnector Interface\u003c\/th\u003e\n      \u003cth\u003eConnected To\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFemale ClickLoc Miniature Coaxial Connector\u003c\/td\u003e\n      \u003ctd\u003eConnects to miniature male coaxial connector of the proximity probe\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMale ClickLoc Miniature Coaxial Connector\u003c\/td\u003e\n      \u003ctd\u003eConnects to miniature female coaxial connector of the Proximitor Sensor\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintain a minimum bend radius of 25.4 mm (1.0 in) along the entire cable run to avoid damaging the coaxial shielding or center conductor.\u003c\/li\u003e\n  \u003cli\u003eEnsure that ClickLoc connectors are hand-tightened. Avoid using wrenches or pliers beyond the maximum recommended torque of 0.56 N m (5 in lb).\u003c\/li\u003e\n  \u003cli\u003eUse connector protectors or silicone self-fusing tape (Bently Nevada part number 03200006) to seal the probe-to-cable connection from liquid and debris.\u003c\/li\u003e\n  \u003cli\u003eRoute the extension cable inside dedicated conduit or cable trays separated from high-voltage AC lines to prevent electrical noise coupling.\u003c\/li\u003e\n  \u003cli\u003eUse physical cable clamps or ties to secure the armored jacket near connectors, eliminating mechanical stress on the ClickLoc interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eATEX\/IECEx:\u003c\/strong\u003e Ex ia IIC T5...T1 Ga, Ex ia IIIC Dc (when connected as an approved system); Ex nA IIC Gc, Ex ec IIC Gc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCSA\/CNRTLus:\u003c\/strong\u003e Class I, Zone 0, AEx\/Ex ia IIC Ga; Class I, Division 2, Groups A, B, C, D; Class II, Groups E, F, G; Class III\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoHS:\u003c\/strong\u003e Compliant with European Union RoHS Directive 2011\/65\/EU and China RoHS (EFUP 15 years)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEMC:\u003c\/strong\u003e EN 61000-6-2 (Immunity), EN 61000-6-4 (Emissions) for industrial environments\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Safety:\u003c\/strong\u003e SIL 2 capable (HFT=0), SIL 3 capable (HFT=1) in safety instrumented systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666742374763,"sku":"330930-060-01-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330930-060-01-05-3300-nsv-extension-cable-lnvgp3m02lu_cd9d9515-c2c3-4267-b829-13c02fbae7f4.jpg?v=1765446897","url":"https:\/\/www.plcprotech.com\/fr\/products\/bently-nevada-330930-060-01-05-3300-nsv-extension-cable","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}