{"product_id":"emerson-kj4001x1-nb1-12p3368x012-deltav-horizontal-localbus-dual-left-cable","title":"Câble double gauche local DeltaV horizontal Emerson KJ4001X1-NB1 12P3368X012","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Emerson KJ4001X1-NB1 (Part Number 12P3368X012) serves as the high-speed data lifeline within the DeltaV™ Distributed Control System. This Horizontal LocalBus Dual Left Cable facilitates the critical interconnection between redundant carrier segments, extending the system's backplane power and communication buses. Engineered for high-availability architectures, the \"Dual\" configuration ensures that both primary and standby data paths remain synchronized across separate hardware carriers. This specific \"Left\" orientation cable enables the expansion of I\/O capacity while maintaining the millisecond-level determinism required for complex process control. By providing a low-impedance, shielded path for the LocalBus signals, the KJ4001X1-NB1 protects the system against data packet loss and electromagnetic interference in demanding industrial environments.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTechnical Configuration\u003c\/h2\u003e\n\u003ch3\u003eDual-Path Redundancy\u003c\/h3\u003e\n\u003cp\u003eThe cable assembly contains two independent sets of shielded conductors. This physical separation supports the DeltaV redundant architecture, allowing the \"A\" and \"B\" switches of the LocalBus to operate concurrently. If one physical path sustains damage, the system continues to function via the secondary path without triggering a processor reset.\u003c\/p\u003e\n\u003ch3\u003eLocalBus Extension Logic\u003c\/h3\u003e\n\u003cp\u003eThe KJ4001X1-NB1 acts as a transparent extension of the carrier backplane. It carries the 12.5 VDC power for I\/O modules along with the address and data lines. The \"Horizontal\" designation indicates its optimized length and flexibility for cabinets where carriers are mounted side-by-side rather than stacked vertically.\u003c\/p\u003e\n\u003ch3\u003eShielding and Connector Integrity\u003c\/h3\u003e\n\u003cp\u003eThe cable features heavy-duty industrial shielding and high-density pin connectors. The connector housings include integrated thumb screws to prevent accidental disconnection due to vibration or mechanical strain, ensuring a constant \"Gas-Tight\" electrical bond.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eFeature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel Number\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eKJ4001X1-NB1\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e12P3368X012\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eSystem Compatibility\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eEmerson DeltaV M-Series \/ S-Series\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eLocalBus Redundant Extension\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOrientation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eHorizontal \/ Dual Left\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eHigh-Density Multi-Pin\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eJacket Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eIndustrial Grade PVC \/ Flame Retardant\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-40°C to 70°C (-40°F to 158°F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eVibration Resistance\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eIEC 60068-2-6 (1g, 10 to 150 Hz)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eRoHS, CE\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; Maintenance Guide\u003c\/h2\u003e\n\u003ch3\u003eBend Radius and Routing\u003c\/h3\u003e\n\u003cp\u003eTechnicians must respect the minimum bend radius of the cable (typically 10x the cable diameter). Avoid sharp 90-degree bends which can cause internal impedance mismatches or physical fatigue in the copper strands. Route the cable through dedicated wire ducts to keep it separate from high-voltage AC motor leads.\u003c\/p\u003e\n\u003ch3\u003eConnector Alignment\u003c\/h3\u003e\n\u003cp\u003eBefore tightening the captive screws, ensure the connector is perfectly flush with the carrier port. Forced insertion can bend the high-density pins, leading to \"LocalBus Fault\" errors that are difficult to diagnose. Tighten the screws evenly to ensure uniform pressure across the pin matrix.\u003c\/p\u003e\n\u003ch3\u003eContinuity Testing\u003c\/h3\u003e\n\u003cp\u003eIn the event of a communication error, perform a continuity check on both the primary and redundant paths. However, never perform a \"Megger\" or high-voltage insulation test on the cable while it is connected to the DeltaV carriers, as the test voltage will destroy the sensitive I\/O electronics.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eEngineering Advantages\u003c\/h2\u003e\n\u003cp\u003eThe KJ4001X1-NB1 simplifies complex system expansions by providing a standardized, \"Plug-and-Play\" connection for extended I\/O carriers. Its specialized \"Dual Left\" design is mission-critical for maintaining the spatial integrity of redundant systems, ensuring that the controller can address all field modules across the horizontal plane with zero latency penalties. The use of high-flex, oxygen-free copper ensures that the cable maintains its electrical characteristics over years of thermal cycling within a control cabinet. For engineers designing for harsh chemical or offshore environments, the cable's rugged jacket provides a high level of resistance to oil, moisture, and atmospheric contaminants.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTechnical FAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: What does the \"Left\" orientation refer to in the cable description?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA1: This refers to the physical port location on the carrier. \"Dual Left\" cables are designed to connect the left-hand ports of redundant carriers to the preceding segment in the bus chain, maintaining the correct logical sequence of the DeltaV nodes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: Can I use a KJ4001X1-NB1 to connect carriers vertically?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA2: While the electrical pinout is the same, this cable's length and molded strain relief are specifically optimized for horizontal mounting. Using it for vertical segments may cause excessive strain on the connectors; for vertical stacking, the \"Vertical LocalBus\" variants are recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: How does the system react if one half of the dual cable is disconnected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA3: The DeltaV controller will generate a \"LocalBus Redundancy Lost\" alarm. The process will continue to run normally using the remaining cable path, but the system is no longer fault-tolerant until the connection is restored.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ4: Is this cable compatible with both M-Series and S-Series hardware?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA4: Yes, the LocalBus physical layer is consistent across these DeltaV generations, provided the carriers utilized support the standard multi-pin LocalBus interface.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Emerson","offers":[{"title":"Default Title","offer_id":52695423811947,"sku":"KJ4001X1-NB1 12P3368X012","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/emerson-kj4001x1-nb1-12p3368x012-horizontal-localbus-dual-left-cable-2fpbkwaw0h5_f3ff21bb-e40c-4ea8-9070-3205884e6204.jpg?v=1766135504","url":"https:\/\/www.plcprotech.com\/fr\/products\/emerson-kj4001x1-nb1-12p3368x012-deltav-horizontal-localbus-dual-left-cable","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}