{"product_id":"bently-nevada-330101-00-48-10-02-05-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330101-00-48-10-02-05 3300 XL 8 mm Proximity Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330101-00-48-10-02-05\u003c\/strong\u003e is a high-performance, non-armored \u003cstrong\u003e8 mm proximity probe\u003c\/strong\u003e designed as a core component of the industry-standard 3300 XL series. Operating on eddy-current measurement principles, this non-contacting sensor provides highly precise dynamic measurements of static shaft position and dynamic vibration against rotating machinery shaft targets (typically AISI 4140 steel). It plays an essential role in machinery protection and condition monitoring chains, interfacing seamlessly with 3300 XL series Proximitor sensors and extension cables.\u003c\/p\u003e\n\n\u003cp\u003eThis specific configuration is built with a \u003cstrong\u003e4.8-inch fully threaded case\u003c\/strong\u003e (indicated by the 0.0-inch unthreaded option and 4.8-inch case length code) using standard 3\/8-24 UNF threads, allowing for direct mounting into bearing housings or machine casings where maximum threaded adjustability is required. It is equipped with a 1.0-meter standard triaxial FEP-insulated cable terminated in a gold-plated miniature coaxial ClickLoc connector (without connector protector) and is fully certified under CSA, ATEX, and IECEx approvals for safe installation in hazardous industrial zones.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRugged polyphenylene sulfide (PPS) probe tip provides structural and chemical resistance in harsh machine environments.\u003c\/li\u003e\n  \u003cli\u003eFully threaded 4.8-inch AISI 303\/304 stainless steel case offers heavy-duty mechanical protection and installation depth flexibility.\u003c\/li\u003e\n  \u003cli\u003eHigh-tensile probe-to-cable design withstands up to 330 N (75 lbf) of pull force.\u003c\/li\u003e\n  \u003cli\u003eGold-plated miniature coaxial ClickLoc connector ensures a vibration-proof, low-loss electrical connection to extension cables.\u003c\/li\u003e\n  \u003cli\u003eStandard FEP-insulated 75-ohm triaxial cable rated for wide operating temperatures.\u003c\/li\u003e\n  \u003cli\u003ePhysically and electrically interchangeable with other Bently Nevada 3300 XL 8 mm proximity probe system components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSteam and gas turbine shaft vibration monitoring.\u003c\/li\u003e\n  \u003cli\u003eRotor axial displacement and radial vibration tracking on compressors, pumps, and cooling tower fans.\u003c\/li\u003e\n  \u003cli\u003ePermanent mounting installations on critical rotating machinery within petrochemical, oil and gas, and power generation plants.\u003c\/li\u003e\n  \u003cli\u003eHigh-reliability protective monitoring chains interfacing with Bently Nevada 3500 rack systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption Segment\u003c\/th\u003e\n      \u003cth\u003eCode on This SKU\u003c\/th\u003e\n      \u003cth\u003eDescription \/ Meaning\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOrderable Part Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330101-00-48-10-02-05\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm Proximity Probe, 3\/8-24 UNF thread, without armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eA - Unthreaded Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e00\u003c\/td\u003e\n      \u003ctd\u003e0.0 inches (fully threaded probe body)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eB - Overall Case Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e48\u003c\/td\u003e\n      \u003ctd\u003e4.8 inches overall case length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eC - Total Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e10\u003c\/td\u003e\n      \u003ctd\u003e1.0 meter (3.3 feet) total cable length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eD - Connector and Cable-Type Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable (no connector protector)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eE - Agency Approval Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003eCSA, ATEX, IECEx Approvals for hazardous locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification Value\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModel \/ Part Number\u003c\/td\u003e\n      \u003ctd\u003e330101-00-48-10-02-05\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Family\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm Proximity Transducer System\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMeasurement Type\u003c\/td\u003e\n      \u003ctd\u003eDisplacement (proximity)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating Principle\u003c\/td\u003e\n      \u003ctd\u003eEddy current\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Diameter\u003c\/td\u003e\n      \u003ctd\u003e8 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCase Thread Size\u003c\/td\u003e\n      \u003ctd\u003e3\/8-24 UNF\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eArmor Option\u003c\/td\u003e\n      \u003ctd\u003eNone (unarmored standard cable)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCable Construction\u003c\/td\u003e\n      \u003ctd\u003e75 ohm triaxial fluoroethylene propylene (FEP) insulated cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNominal Probe DC Resistance\u003c\/td\u003e\n      \u003ctd\u003e7.59 ohms +\/- 0.50 ohms (center conductor to outer conductor)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTensile Strength (Maximum)\u003c\/td\u003e\n      \u003ctd\u003e330 N (75 lbf) probe case to probe lead; 270 N (60 lbf) at probe-to-extension connector\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMinimum Cable Bend Radius\u003c\/td\u003e\n      \u003ctd\u003e25.4 mm (1.0 inch)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended Probe Case Torque\u003c\/td\u003e\n      \u003ctd\u003e11.2 N-m (100 in-lbf) standard forward-mount; 7.5 N-m (66 in-lbf) first three threads\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum Probe Case Torque\u003c\/td\u003e\n      \u003ctd\u003e33.9 N-m (300 in-lbf) standard forward-mount; 22.6 N-m (200 in-lbf) first three threads\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n      \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Case Material\u003c\/td\u003e\n      \u003ctd\u003eAISI 303 or 304 stainless steel (SST)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating and Storage Temperature\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +177 degC (-62 degF to +350 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEnvironmental Notes\u003c\/td\u003e\n      \u003ctd\u003eExposing the probe to temperatures below -34 degC (-30 degF) may cause premature pressure seal failure\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRelative Humidity Limits\u003c\/td\u003e\n      \u003ctd\u003eLess than 3% change in Average Scale Factor (ASF) when tested in 93% humidity (IEC 68-2-3 for up to 56 days)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e45 mm x 95 mm x 95 mm (H x W x D)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.14 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the proximity probe is installed in accordance with standard Bently Nevada engineering practices. Mount with an appropriate probe gap per system calibration (typically gapped at 1.27 mm or 50 mils against an AISI 4140 steel target for standard 3300 XL systems). Always route the coaxial cable with proper shielding and grounding practices to prevent electrical noise in the vibration monitoring paths. Ensure minimum cable bend radius limits of 25.4 mm (1.0 inch) are respected. Avoid overtightening the probe casing; apply torque up to the recommended 11.2 N-m (100 in-lbf) to prevent damaging thread engagements.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eThis configuration complies with the following approvals and directives:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEMC Directive 2014\/30\/EU:\u003c\/strong\u003e Compliant with EN 61000-6-2 (Industrial Immunity) and EN 61000-6-4 (Industrial Emissions).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoHS Directive 2011\/65\/EU:\u003c\/strong\u003e Complies with restrictive hazardous substances standards.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHazardous Area Approvals (Option 05):\u003c\/strong\u003e Certified for intrinsically safe (ia) and non-incendive (nA\/ec) environments under CSA, ATEX, and IECEx approvals.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Safety:\u003c\/strong\u003e SIL 2 capability (HFT=0), SIL 3 capability (HFT=1) when used as part of a complete safety-instrumented system monitoring chain.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666620543339,"sku":"330101-00-48-10-02-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330101-00-48-10-02-05-3300xl-8-mm-proximity-probe-e1pvahbigus_7e5264a6-d810-460a-92b0-5789021611cc.jpg?v=1765444252","url":"https:\/\/www.plcprotech.com\/id\/products\/bently-nevada-330101-00-48-10-02-05-3300-xl-8-mm-proximity-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}