{"product_id":"general-electric-ic670alg320-field-control-analog-output-module","title":"General Electric IC670ALG320 Field Control Analog Output Module","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe General Electric IC670ALG320 is a high-performance Field Control Analog Output Module designed for distributed control and I\/O applications. This module features four grouped current and voltage analog output channels capable of providing simultaneous current and voltage signals from each D\/A converter. It supports flexible output configurations, including 4 to 20 mA and 0 to 20 mA current spans, as well as 0 to 10 V and 0 to 12.5 V voltage spans, easily selectable via jumper placement on the corresponding I\/O Terminal Block.\u003c\/p\u003e\n\u003cp\u003eEngineered for seamless integration within the General Electric Field Control architecture, the IC670ALG320 requires a Bus Interface Unit (BIU) to communicate output data to the host processor. It includes a built-in LED indicator visible through the transparent module top to verify correct field and backplane power status. With robust 12-bit digital resolution and built-in transient protection, this module ensures accurate and reliable signal generation for demanding industrial automation environments.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  schemaLocation=\"features\"\n  \u003cli\u003eFour grouped analog output channels supporting simultaneous current and voltage outputs\u003c\/li\u003e\n  \u003cli\u003eConfigurable current output ranges of 0 to 20 mA and 4 to 20 mA\u003c\/li\u003e\n  \u003cli\u003eConfigurable voltage output ranges of 0 to 10 V and 0 to 12.5 V via terminal jumpers\u003c\/li\u003e\n  \u003cli\u003eStandard 12-bit digital resolution with 4-word (8-byte) analog output data mapping\u003c\/li\u003e\n  \u003cli\u003eIntegrated open-wire diagnostic monitoring functionality on current output channels\u003c\/li\u003e\n  \u003cli\u003eRobust optical and electrical isolation rated at 1500 VAC for 1 minute to ground and logic\u003c\/li\u003e\n  \u003cli\u003eFront-panel status LED for quick verification of field and backplane power\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDistributed process control systems\u003c\/li\u003e\n  \u003cli\u003eAnalog actuator and valve positioning\u003c\/li\u003e\n  \u003cli\u003eInterfacing with chart recorders and analog meters\u003c\/li\u003e\n  \u003cli\u003eIndustrial manufacturing and assembly lines\u003c\/li\u003e\n  \u003cli\u003eData acquisition and remote telemetry units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eGeneral Electric\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Number\u003c\/td\u003e\n      \u003ctd\u003eIC670ALG320\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Family\u003c\/td\u003e\n      \u003ctd\u003eField Control\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModule Type\u003c\/td\u003e\n      \u003ctd\u003eAnalog Output Module\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNumber of Channels\u003c\/td\u003e\n      \u003ctd\u003e4 Points (Grouped)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower Supply Voltage Range\u003c\/td\u003e\n      \u003ctd\u003e20 to 29 VDC (5% max. ripple)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating Input Current\u003c\/td\u003e\n      \u003ctd\u003e180 mA max. (including loop current)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStandby Power Current\u003c\/td\u003e\n      \u003ctd\u003e80 mA typical (no output)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModule Power Dissipation\u003c\/td\u003e\n      \u003ctd\u003e1.5 W min. to 4.3 W max.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDigital Resolution\u003c\/td\u003e\n      \u003ctd\u003e12 bits typical\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCurrent Output Ranges\u003c\/td\u003e\n      \u003ctd\u003e0–20 mA, 4–20 mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVoltage Output Ranges\u003c\/td\u003e\n      \u003ctd\u003e0–10 V, 0–12.5 V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIsolation\u003c\/td\u003e\n      \u003ctd\u003e1500 VAC for 1 min (ground and logic)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUnited States\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConnections \/ Interfaces\u003c\/h3\u003e\n\u003cp\u003eThe IC670ALG320 module interfaces with the system via a compatible Bus Interface Unit and mounts onto an appropriate I\/O Terminal Block (such as box terminal, barrier terminal, or wire-to-board connector variants). Field wiring should utilize instrumentation-grade shielded twisted-pair or triad cable with shields grounded at a local panel ground near the module to ensure optimal noise immunity.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEnsure all power supplies are turned off before installing or removing the module and terminal blocks.\u003c\/li\u003e\n  \u003cli\u003eVerify that the correct wire jumpers are installed between the JMP and RET terminals on the I\/O Terminal Block when utilizing 0 to 20 mA or 0 to 12.5 V ranges.\u003c\/li\u003e\n  \u003cli\u003eGround the module chassis using the chassis ground terminal on the module base for superior electromagnetic interference (EMI) protection.\u003c\/li\u003e\n  \u003cli\u003eMaintain recommended wire gauges (AWG #14 to AWG #22) depending on the selected terminal block type.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"General Electric","offers":[{"title":"Default Title","offer_id":53770259890539,"sku":"IC670ALG320","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/IC670ALG320_1200x1200_b6600423-5978-4a6a-90ee-3b5eaa7f856e.jpg?v=1787739681","url":"https:\/\/www.plcprotech.com\/it\/products\/general-electric-ic670alg320-field-control-analog-output-module","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}