{"product_id":"bently-nevada-330104-00-08-50-01-05-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330104-00-08-50-01-05 3300 XL 8 mm Proximity Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eOption 00 (0 mm unthreaded), Option 08 (80 mm overall case length), and Option 50 (5.0 m total length with armor) specify this metric threaded proximity probe configuration — \u003cstrong\u003e330104-00-08-50-01-05\u003c\/strong\u003e \u003cstrong\u003e3300 XL 8 mm Proximity Probe\u003c\/strong\u003e. Featuring an M10 x 1 thread, this configuration is supplied with integrated stainless steel armor to shield the triaxial FEP-insulated cable against mechanical wear, abrasion, and cutting fluids in harsh environments. It features a miniature coaxial ClickLoc connector with a pre-installed connector protector (Option 01) and carries CSA, ATEX, and IECEx agency approvals (Option 05) for deployment in classified hazardous areas.\u003c\/p\u003e\n\u003cp\u003eThis specific configuration differs from unarmored metric siblings by including flexible AISI 302 or 304 stainless steel protective armor with a protective FEP outer jacket over the entire 5-meter lead length. Because it has a total length of 5.0 meters, this probe connects directly to a 5-meter 3300 XL Proximitor sensor without requiring an intermediate extension cable, minimizing electrical connections and transmission noise in the vibration measurement loop. The fully threaded 80 mm case allows for maximum depth adjustment inside threaded mounting ports, facilitating precise sensor gapping for radial vibration, shaft position, or speed measurements.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eM10 x 1 metric thread configuration with integrated flexible AISI 302 or 304 stainless steel armor and FEP outer jacket.\u003c\/li\u003e\n  \u003cli\u003eOption 00 specifies a 0 mm unthreaded length, making the 80 mm probe case fully threaded for maximum mounting adjustment.\u003c\/li\u003e\n  \u003cli\u003eOption 08 specifies an 80 mm overall case length to accommodate typical machine casing penetration depths.\u003c\/li\u003e\n  \u003cli\u003eOption 50 provides a 5.0-meter (16.4 feet) total cable length, designed to match 5-meter Proximitor sensor systems.\u003c\/li\u003e\n  \u003cli\u003eOption 01 includes a miniature coaxial ClickLoc connector with an integrated connector protector to prevent environmental contamination and moisture ingress.\u003c\/li\u003e\n  \u003cli\u003eOption 05 certifies compliance with CSA, ATEX, and IECEx standards for installation in hazardous and explosive gas atmospheres.\u003c\/li\u003e\n  \u003cli\u003ePolyphenylene sulfide (PPS) probe tip material molded for durability against harsh industrial lubricants and chemical exposure.\u003c\/li\u003e\n  \u003cli\u003eViton O-ring pressure seal built into the probe tip to withstand pressure differentials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFluid-film bearing machinery vibration and shaft position monitoring.\u003c\/li\u003e\n  \u003cli\u003eSteam turbines, gas turbines, centrifugal compressors, and electric motors in power generation and petrochemical facilities.\u003c\/li\u003e\n  \u003cli\u003eRadial vibration and axial position (thrust) measurements.\u003c\/li\u003e\n  \u003cli\u003eKeyphasor phase reference and speed measurement applications.\u003c\/li\u003e\n  \u003cli\u003eHarsh industrial environments requiring mechanical protection for cable runs against cutting and abrasion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eThe 330104-00-08-50-01-05 configuration is decoded from the official Bently Nevada 3300 XL 8 mm Proximity Transducer System options:\u003c\/p\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption Segment\u003c\/th\u003e\n      \u003cth\u003eCode Value\u003c\/th\u003e\n      \u003cth\u003eMeaning \/ Specification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eBase Model\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330104\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm Proximity Probe, M10 x 1 thread, with protective armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eA - Unthreaded Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e00\u003c\/td\u003e\n      \u003ctd\u003e0 mm unthreaded length (fully threaded case)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eB - Overall Case Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e08\u003c\/td\u003e\n      \u003ctd\u003e80 mm overall case length (increments of 10 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eC - Total Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e50\u003c\/td\u003e\n      \u003ctd\u003e5.0 meters (16.4 feet) total length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eD - Connector and Cable Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e01\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc connector with connector protector, standard cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eE - Agency Approval Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003eCSA, ATEX, IECEx Approvals\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eValue \/ Specification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePart Number\u003c\/td\u003e\n      \u003ctd\u003e330104-00-08-50-01-05\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm Proximity Probe (Metric, Armored)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread Size\u003c\/td\u003e\n      \u003ctd\u003eM10 x 1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n      \u003ctd\u003e0 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCase Length\u003c\/td\u003e\n      \u003ctd\u003e80 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTotal Cable Length\u003c\/td\u003e\n      \u003ctd\u003e5.0 meters (16.4 feet)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eArmor Material\u003c\/td\u003e\n      \u003ctd\u003eFlexible AISI 302 or 304 SST with FEP outer jacket\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCable Type\u003c\/td\u003e\n      \u003ctd\u003e75 ohm triaxial, fluoroethylene propylene (FEP) insulated\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConnector Type\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc with connector protector\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n      \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Case Material\u003c\/td\u003e\n      \u003ctd\u003eAISI 303 or 304 stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLinear Range\u003c\/td\u003e\n      \u003ctd\u003e2.0 mm (80 mils), from 0.25 to 2.25 mm (10 to 90 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eScale Factor\u003c\/td\u003e\n      \u003ctd\u003e7.87 V\/mm (200 mV\/mil) nominal\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDC Resistance\u003c\/td\u003e\n      \u003ctd\u003e8.73 ohms +\/- 0.50 ohms (center conductor to outer conductor)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n      \u003ctd\u003e-52 to +177 degC (-62 to +350 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePressure Seal Limit\u003c\/td\u003e\n      \u003ctd\u003eDifferential pressure seal up to tip rating (Viton O-ring seal, -34 degC lower limit)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMinimum Cable Bend Radius\u003c\/td\u003e\n      \u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum Cable Tensile Strength\u003c\/td\u003e\n      \u003ctd\u003e330 N (75 lbf) probe case to lead; 270 N (60 lbf) at connectors\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e45 mm x 230 mm x 230 mm (H x W x D) (packaged envelope)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.60 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eConnector Component\u003c\/th\u003e\n      \u003cth\u003eType \/ Function\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Connector\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc male connector (gold-plated brass or beryllium copper)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConnector Protection\u003c\/td\u003e\n      \u003ctd\u003eIntegrated outer sleeve to shield the physical connection from lubricants and moisture\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConnection Torque\u003c\/td\u003e\n      \u003ctd\u003eFinger-tight recommended; maximum torque 0.565 N-m (5 in-lbf)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eProper installation of the metric proximity probe involves several key steps to maintain sensor calibration and prevent physical damage:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify that the thread engagement length does not exceed 15 mm to avoid binding during installation in the M10 x 1 threaded mounting port.\u003c\/li\u003e\n  \u003cli\u003eSet the initial probe gap (typically 1.27 mm or 50 mils) using a voltmeter to measure the Proximitor output voltage (typically -10 Vdc at the center of the linear range).\u003c\/li\u003e\n  \u003cli\u003eEnsure the minimum bend radius of the armored cable is at least 25.4 mm (1.0 in) during routing to prevent internal conductor damage.\u003c\/li\u003e\n  \u003cli\u003eUse the pre-installed connector protector (Option 01) to seal the probe-to-cable junction. Do not use silicone tape if the connection is exposed to turbine oil.\u003c\/li\u003e\n  \u003cli\u003eVerify that the total probe length matches the Proximitor calibration; a 5.0-meter probe must connect only to a 5-meter Proximitor sensor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eThis 3300 XL probe configuration carries certifications for hazardous locations under the Option 05 agency approval package:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eATEX\/IECEx:\u003c\/strong\u003e Intrinsically safe Ex ia IIC T4\/T5 Ga, Ex ia IIIC T90C\/T105C Dc for zones 0, 1, and 2.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCSA\/US:\u003c\/strong\u003e Class I, Zone 0, AEx\/Ex ia IIC T4\/T5 Ga; Class I, Division 1, Groups A, B, C, D; Class II, Groups E, F, G; Class III.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-incendive:\u003c\/strong\u003e Class I, Division 2, Groups A, B, C, D when installed per drawing 140979.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCE Mark:\u003c\/strong\u003e Compliant with relevant European electromagnetic and environmental directives.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666737557867,"sku":"330104-00-08-50-01-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330104-00-08-50-01-05-3300-xl-8-mm-proximity-probes-hivd2k0vj2w_77c13e5e-cf12-498d-a051-c9fbf9a58f71.jpg?v=1765446829","url":"https:\/\/www.plcprotech.com\/ms\/products\/bently-nevada-330104-00-08-50-01-05-3300-xl-8-mm-proximity-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}