{"product_id":"bently-nevada-330907-05-30-10-02-00-3300-nsv-reverse-mount-probe","title":"Bently Nevada 330907-05-30-10-02-00 3300 NSv Reverse Mount Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e330907-05-30-10-02-00\u003c\/strong\u003e is a non-contacting eddy-current transducer designed for precision shaft displacement and dynamic vibration monitoring within machine diagnostic loops. This specific part number configuration operates as an embedded sensor input within the \u003cstrong\u003e3300 NSv Proximity Transducer System\u003c\/strong\u003e, which is purposefully deployed inside industrial centrifugal air compressors, refrigeration compressors, and process gas machinery characterized by highly restricted internal space and tight installation envelopes. By projecting a high-frequency radio frequency (RF) carrier field into the adjacent target area, the sensor continuously captures micro-gap transitions caused by surface-level eddy currents and relays this raw analog displacement wave back to a remote Proximitor module for evaluation.\u003c\/p\u003e\n\u003cp\u003eUnlike traditional forward-mount hardware designs, this reverse-mount mechanical configuration is engineered to be threaded directly from the rear side of specialized installation sleeves, internal guide tubes, or machine bulkheads. This architectural profile allows field engineering teams to adjust probe gaps or swap replacement hardware completely from outside the main bearing housing without requiring a full teardown of the casing or bearing cover layouts. The \u003cstrong\u003e330907-05-30-10-02-00\u003c\/strong\u003e features an M10X1 metric threaded body configuration executed without armor, minimizing the routing cross-section through internal machinery ports. It is factory-calibrated to measure dynamic radial vibration on narrow shafts smaller than 51 mm (2 in) or axial thrust coordinates on flat target surfaces smaller than 15 mm (0.6 in). Operating under this general-purpose designation without specialized hazardous location approvals, it delivers a continuous linear displacement signal directly to host monitoring platforms.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReverse-mount mechanical architecture enabling rear-insertion and outer-casing calibration adjustment inside tight internal machinery envelopes.\u003c\/li\u003e\n\u003cli\u003eM10X1 metric threaded stainless steel casing profile without an armor wrap, providing a low-clearance routing execution for restricted guide paths.\u003c\/li\u003e\n\u003cli\u003eIntegrated gold-plated brass ClickLoc miniature coaxial plug delivering a low-loss, vibration-proof positive locking wire link.\u003c\/li\u003e\n\u003cli\u003ePatented TipLoc molding technique creating a high-integrity, robust bond between the polyphenylene sulfide tip and the stainless steel body.\u003c\/li\u003e\n\u003cli\u003ePatented CableLoc design providing up to 220 N (50 lb) of tensile pull strength securely coupling the probe cable to the tip assembly.\u003c\/li\u003e\n\u003cli\u003eDirect electrical and mechanical backward compatibility with legacy Bently Nevada 3300 RAM transducer systems and 190 series processing architectures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear-access radial shaft vibration and fluid-film bearing displacement tracking on industrial high-speed centrifugal air compressors.\u003c\/li\u003e\n\u003cli\u003eInternal rotor axial thrust position offset capture inside compact turbo-expander gearboxes via specialized reverse sleeve brackets.\u003c\/li\u003e\n\u003cli\u003eRotating target speed detection, zero-speed confirmation, and Keyphasor phase reference signal generation in deep housing bulkheads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMechanical Profile \u0026amp; Exact Weight Formulas\u003c\/h3\u003e\n\u003cp\u003eIn high-integrity asset tracking, non-specific bulk weight estimations fail to satisfy the constraints of precise mechanical design. Per official Bently Nevada 147385 datasheet constants, the physical geometry and cumulative dry mass metrics for this specific 1.0-meter unarmored reverse mount probe are calculated below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded Case Length (Option A):\u003c\/strong\u003e Exactly \u003cstrong\u003e5 mm\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Case Length (Option B):\u003c\/strong\u003e Exactly \u003cstrong\u003e30 mm\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded Case Section:\u003c\/strong\u003e Calculated as Overall Case Length minus Unthreaded Length (30 mm - 5 mm) = \u003cstrong\u003e25 mm\u003c\/strong\u003e of active M10X1 threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Physical Cable Length (Option C):\u003c\/strong\u003e Exactly \u003cstrong\u003e1.0 meter (39 inches)\u003c\/strong\u003e measured from the probe tip face to the terminal coaxial joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Mass Density of Unarmored Cable:\u003c\/strong\u003e Nominal \u003cstrong\u003e33 grams per meter\u003c\/strong\u003e driven by the unarmored, lightweight fluoroethylene propylene (FEP) insulated coaxial probe line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Probe Head and Reverse-Mount Case Mass:\u003c\/strong\u003e Approximately \u003cstrong\u003e22 grams\u003c\/strong\u003e including the compact M10 stainless steel housing, internal sensing coil, and localized transition junction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Net Hardware Weight:\u003c\/strong\u003e Calculated as (33 g\/m x 1.0 m) + 22 g = \u003cstrong\u003e55 grams\u003c\/strong\u003e absolute net hardware weight per unit (excluding heavy field packaging box materials).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable style=\"width: 99.9009%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 32.8048%;\"\u003e\u003cstrong\u003eOption Code Slot\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth style=\"width: 30.3458%;\"\u003e\u003cstrong\u003eSelected Option Value\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth style=\"width: 36.105%;\"\u003e\u003cstrong\u003eTechnical Detail\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.8048%;\"\u003e\u003cstrong\u003eModel Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 30.3458%;\"\u003e330907\u003c\/td\u003e\n\u003ctd style=\"width: 36.105%;\"\u003e3300 NSv Probe, M10X1 thread, reverse mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.8048%;\"\u003e\u003cstrong\u003eA: Unthreaded Length Option\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 30.3458%;\"\u003e-05\u003c\/td\u003e\n\u003ctd style=\"width: 36.105%;\"\u003e5 mm unthreaded section length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.8048%;\"\u003e\u003cstrong\u003eB: Overall Case Length Option\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 30.3458%;\"\u003e-30\u003c\/td\u003e\n\u003ctd style=\"width: 36.105%;\"\u003e30 mm overall case length profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.8048%;\"\u003e\u003cstrong\u003eC: Total Length Option\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 30.3458%;\"\u003e-10\u003c\/td\u003e\n\u003ctd style=\"width: 36.105%;\"\u003e1.0 meter (39 in) physical cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.8048%;\"\u003e\u003cstrong\u003eD: Connector\/Cable Option\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 30.3458%;\"\u003e-02\u003c\/td\u003e\n\u003ctd style=\"width: 36.105%;\"\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.8048%;\"\u003e\u003cstrong\u003eE: Agency Approval Option\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 30.3458%;\"\u003e-00\u003c\/td\u003e\n\u003ctd style=\"width: 36.105%;\"\u003eNot required (General purpose \/ unclassified area rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003ePrecise Engineering Data\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number Identification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e330907-05-30-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Category\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNon-contacting Eddy-Current Proximity Transducer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Architecture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eReverse Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThread Mechanical Interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM10 X 1 thread profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLinear Measurement Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 mm (60 mils) nominal tracking window\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem Scale Factor Calibration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil) when integrated with NSv Proximitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProbe Nominal Tip Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Case Bend Radius\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1.0 in) absolute field bending constraint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProbe Tip Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProbe Case Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProbe Cable Specifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e75 ohm coaxial, fluoroethylene propylene (FEP) insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGold-plated brass ClickLoc connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Case Torque (Reverse Mount)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22.6 N\u003ci\u003em (200 in\u003c\/i\u003elb) maximum rated; 7.5 N\u003ci\u003em (66 in\u003c\/i\u003elb) recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Thread Engagement Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProbe Pressure Sealing Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eViton O-ring designed to seal differential pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature Bounds\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-52 degC to +177 degC (-62 degF to +351 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage Temperature Bounds\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-52 degC to +177 degC (-62 degF to +351 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRelative Humidity Limits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100% condensing, non-submersible when connectors are protected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet Hardware Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55 grams (typical unit net mass calculation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eConnections\/Interfaces\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eInterface Element\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eFunction Assignment\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThreaded M10X1 Reverse Barrel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRear physical insertion interface into internal probe sleeve or machine wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClickLoc Miniature Plug\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMale coaxial terminal linking into the 3300 NSv extension cable path\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal System Loop Matching:\u003c\/strong\u003e This 1.0-meter physical length probe must be paired exclusively with a 4.0-meter extension cable to form a 5.0-meter total system loop, or a 6.0-meter extension cable to form a 7.0-meter total system loop. The total length must precisely match the electrical calibration length specified on the 3300 XL NSv Proximitor sensor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Gap Adjustment:\u003c\/strong\u003e Thread the reverse-mount probe from the back of the installation sleeve until the tip achieves the required gap voltage offset (typically -9.0 Vdc at the linear midpoint, corresponding to a nominal 1.0 mm gap setting) relative to the shaft target before locking the assembly into position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid Ground Contacts:\u003c\/strong\u003e Ensure the miniature coaxial ClickLoc connector junction does not touch the metal walls of the junction box or conduit fittings. Wrap the connected union with self-fusing silicone tape to prevent electrical noise loop interference and ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture and FEP Protection:\u003c\/strong\u003e Because reverse mount probes are not available with armor or connector protector options (per factory design note 6), the raw FEP-jacketed cable must be handled with care. Route it entirely inside sealed, oil-tight internal conduit paths or structural guide channels to prevent abrasive wear from internal oil spray or moving machine parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Engagement Limits:\u003c\/strong\u003e Do not exceed the maximum thread engagement length constraint of 15 mm within internal mount brackets to prevent binding or physical distortion during field installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMC Directive:\u003c\/strong\u003e European Community Directive 2014\/30\/EU compliant, tested to EN 61000-6-2 (Immunity for Industrial Environments) and EN 61000-6-4 (Emissions for Industrial Environments).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoHS Directive:\u003c\/strong\u003e European Community Directive 2011\/65\/EU compliant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChina RoHS:\u003c\/strong\u003e EFUP designation of 15 years in accordance with SJ\/T 11364-2024 for associated cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFCC Rules:\u003c\/strong\u003e Complies with Part 15 of the FCC Rules for industrial digital devices.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666520338795,"sku":"330907-05-30-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330907-05-30-10-02-00-dro02a3al5c_65fb31af-b28d-4e7f-8a8a-0b3e6603851a.jpg?v=1765520821","url":"https:\/\/www.plcprotech.com\/ms\/products\/bently-nevada-330907-05-30-10-02-00-3300-nsv-reverse-mount-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}