{"product_id":"330180-x1-cn-mod-145004-14-bently-nevada-3300-xl-proximitor-sensor","title":"330180-X1-CN MOD 145004-14 | Bently Nevada | 3300 XL Proximitor Sensor","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330180-X1-CN MOD 145004-14 (330180-X1-CN-145004-14)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eby Bently Nevada is a specialized 3300 XL Proximitor Sensor designed for advanced machinery protection in demanding sectors like heavy mining, offshore oil platforms, and thermal power plants. This specific MOD 145004-14 variant is factory-calibrated for AISI 1040 steel target material, ensuring maximum linearity and accuracy when standard 4140 calibration is insufficient. By converting the complex eddy current signal from the probe into a stable voltage output, this sensor enables real-time tracking of radial vibration and axial thrust. Its robust design is critical for detecting early-stage rotor imbalances and shaft misalignments, allowing operators to execute predictive maintenance and significantly reduce the probability of catastrophic machine failure or unplanned outages.\u003c\/p\u003e\n\u003ch3\u003eSuffix \u0026amp; Modification Breakdown\u003c\/h3\u003e\n\u003cp\u003eEach segment of this model number represents a critical hardware or calibration specification tailored for industrial compliance:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330180\u003c\/strong\u003e: Base series identifier for the 3300 XL Proximitor Sensor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eX1\u003c\/strong\u003e: Specifies the total system length and mounting hardware configuration (typically compatible with 5.0 or 9.0 meter systems).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCN\u003c\/strong\u003e: Denotes global and regional agency approvals, including ATEX\/IECEx for explosive atmospheres and the Chinese NEPSI hazardous area certification.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMOD 145004-14\u003c\/strong\u003e: Indicates a factory-level modification for non-standard requirements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e14\u003c\/strong\u003e: Target Material Calibration. This unit is specifically tuned for AISI 1040 steel targets, adjusting the scale factor to maintain the standard 7.87 V\/mm (200 mV\/mil) output.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEssential Hardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eFeature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTechnical Detail\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330180-X1-CN MOD 145004-14\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eU.S.A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eTarget Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 1040 Steel (Custom Calibration)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eStandard Scale Factor\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eInput Power\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-17.5 VDC to -26 VDC\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temp\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-52 to 100 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eApprovals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eATEX, IECEx, NEPSI\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecialist Inquiry \u0026amp; Support\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is AISI 1040 calibration necessary for this MOD version?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard Bently Nevada sensors are calibrated for AISI 4140 steel. If your shaft material is AISI 1040, using a standard sensor would result in significant linearity errors and incorrect vibration readings. This MOD version ensures the 200 mV\/mil output remains accurate for the specific metallurgy of your machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this Proximitor be mounted in a high-vibration area?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the 3300 XL series is robust, it should ideally be mounted in a weather-tight housing (like a 3300 XL internal or external housing) to shield it from direct environmental impact and excessive structural vibration, ensuring long-term signal stability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this unit compatible with non-XL 3300 probes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3300 XL Proximitor is designed for use with 3300 XL probes; however, it provides backward compatibility with some non-XL 3300 5 mm and 8 mm probes. Always verify total system length (5 m or 9 m) before commissioning.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eField Engineering \u0026amp; Installation Protocol\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eShielding and Grounding Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo prevent EMI (Electromagnetic Interference) from distorting the vibration signal, the coaxial cable shield must be isolated from the machine ground. Ensure the Proximitor is mounted on a DIN rail that is properly bonded to a clean instrument ground. Failure to maintain a single-point ground can lead to \"noise\" that the monitoring system may misinterpret as actual machinery vibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTarget Material Sensitivity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSince this unit is modified for AISI 1040 steel (MOD 145004-14), ensure that the probe is not installed on a shaft made of 4140 or other alloys. Using the wrong calibration will cause a Scale Factor Error (SFE). We recommend verifying the shaft material via the original equipment manufacturer (OEM) documentation prior to replacing existing sensors with this modified version.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668323889515,"sku":"145004-14","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/330180-x1-cn-mod-145004-14-azh4mdn1qhi_909cbd1b-cb4a-461a-b55e-44f40171d56c.jpg?v=1765521250","url":"https:\/\/www.plcprotech.com\/products\/330180-x1-cn-mod-145004-14-bently-nevada-3300-xl-proximitor-sensor","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}