{"product_id":"43501-01-04-01-bently-nevada-low-pressure-cable-seal-1-2-14-npt","title":"43501-01-04-01 Bently Nevada Low Pressure Cable Seal (1\/2-14 NPT)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e43501-01-04-01\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a high-integrity\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eLow Pressure Cable Seal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eengineered by Bently Nevada to provide a robust environmental barrier between a machine's internal housing and the external atmosphere. This component is essential for installations where proximity probe cables must exit a bearing housing or gear box while preventing the leakage of oil mist, splash, or low-pressure gases.\u003c\/p\u003e\n\u003cp\u003eUnlike standard industrial glands, the 43501 series is designed specifically to protect the delicate coaxial cables of the 3300 XL and 7200 series transducer systems. It maintains a tight seal around the cable outer jacket without compressing the dielectric layer, which would otherwise change the cable's capacitance and ruin the sensor's calibration. This unit ensures that your machine's lubrication remains contained while protecting the monitoring system from environmental contamination.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTechnical Configuration\u003c\/h2\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e43501-01-04-01\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eutilizes a modular hardware stack to accommodate multiple cables through a single penetration point.\u003c\/p\u003e\n\u003ch3\u003eHigh Pressure Side Thread (01)\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e01\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edesignation specifies a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1\/2-14 NPT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethread for the high-pressure (machine) side. This standard tapered thread ensures a leak-proof connection when installed into the machine casing or a dedicated seal housing.\u003c\/p\u003e\n\u003ch3\u003eCable Grommet and Washer (04)\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e04\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eoption is a multi-port configuration. The internal grommet is designed to accommodate\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to 4 cables\u003c\/strong\u003e. To maintain sealing integrity, only one hole is fully punched at the factory, while the remaining three are partially pre-drilled. This allows the installer to punch through only the number of ports required for the specific application (e.g., two X-Y radial probes), keeping the unused ports hermetically sealed.\u003c\/p\u003e\n\u003ch3\u003eLow Pressure Side Thread (01)\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e01\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esignifies a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1\/2-14 NPT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethread on the low-pressure (atmospheric) side. This allows for the direct connection of rigid or flexible conduit, protecting the cables as they transit to the Proximitor® junction box.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eChrome-plated Steel or Stainless Steel components\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eGrommet Material\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOil-resistant Neoprene or Fluorocarbon\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eThread Size (Both Sides)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1\/2-14 NPT\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eMax Cable Capacity\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e4 Coaxial Cables (standard 7200\/3300 XL)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003ePressure Rating\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUp to 345 kPa (50 psi)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-34°C to +121°C (-30°F to +250°F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3.0 Kg (Robust industrial packaging)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch2\u003eEngineering Advantages\u003c\/h2\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e43501 Cable Seal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eoffers mechanical advantages that generic cable glands cannot match:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePreservation of Signal Integrity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe internal grommet provides a \"soft\" seal that grips the cable without deforming the coaxial geometry. This prevents impedance changes that lead to false vibration readings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eModular Multi-Cable Entry:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBy allowing up to four cables through a single 1\/2-inch NPT hole, the 43501 reduces the number of penetrations required in the machine casing, maintaining structural integrity and reducing potential leak points.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNPT to NPT Bridge:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe dual-threaded design acts as a structural bridge, allowing for a seamless, sealed transition from the machine wall directly into a conduit system.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; Maintenance Guide\u003c\/h2\u003e\n\u003cp\u003eSuccessful sealing requires careful preparation of the grommet and cable routing.\u003c\/p\u003e\n\u003ch3\u003eGrommet Preparation\u003c\/h3\u003e\n\u003cp\u003eFor the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e-04\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003egrommet, only punch through the holes you intend to use. Use a sharp, clean punch to avoid tearing the neoprene. If you accidentally punch an extra hole, it must be plugged with a dummy cable or a specialized sealing plug to prevent oil bypass.\u003c\/p\u003e\n\u003ch3\u003eAssembly Sequence\u003c\/h3\u003e\n\u003cp\u003eSlide the compression nut, washer, and grommet onto the cables before the connectors are attached (if using field-terminable cables). If the connectors are already installed, ensure they can pass through the 1\/2-inch NPT opening. Tighten the compression nut until the grommet visibly expands around the cables; do not over-torque, as this can crush the coaxial dielectric.\u003c\/p\u003e\n\u003ch3\u003eThread Sealing\u003c\/h3\u003e\n\u003cp\u003eApply a high-quality thread sealant (such as PTFE tape or pipe dope) to the NPT threads before installation into the machine. Ensure no sealant enters the internal chamber of the seal where it could interfere with the grommet's seating.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTechnical FAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: What is the maximum pressure this \"Low Pressure\" seal can handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA1: The 43501 series is rated for pressures up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e345 kPa (50 psi)\u003c\/strong\u003e. For applications involving higher pressures (such as high-pressure hydrogen-cooled generators), you must use the Bently Nevada 16622 High Pressure Oil Seal series.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: Can I use this for cables other than Bently Nevada proximity cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA2: Yes, provided the cable diameter is similar to standard 7200 or 3300 XL coaxial cables (typically approx. 2.5 mm to 3.8 mm). However, the grommet is specifically contoured for Bently Nevada cable dimensions to ensure a certified seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: Why is the shipping weight 3 kg for a small cable seal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA3: The 43501 is a heavy-duty industrial fitting. To protect the NPT threads and the internal precision-ground washers during transit, it is shipped in reinforced packaging. The 3 kg weight reflects the robust nature of the hardware and its protective box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ4: Is the \"04\" grommet compatible with armored cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA4: Generally, no. The 43501 is designed for standard (unarmored) coaxial cables. Armored cables typically require a larger seal or the removal of the armor before passing through the seal, with the armor terminated at the conduit fitting.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52668325691755,"sku":"43501-01-04-01","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/43501-01-04-01-bmxgznn1gmu_81356fe6-ef34-4aa0-bc10-23fecc823f41.jpg?v=1765521304","url":"https:\/\/www.plcprotech.com\/products\/43501-01-04-01-bently-nevada-low-pressure-cable-seal-1-2-14-npt","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}