{"product_id":"bently-nevada-21504-00-08-05-02-5-mm-and-8-mm-standard-mount-probe","title":"Bently Nevada 21504-00-08-05-02 5 mm and 8 mm Standard Mount Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cstrong\u003e21504-00-08-05-02\u003c\/strong\u003e: 7200 series 8 mm standard mount proximity probe, featuring 0.0 in (Option 00) unthreaded length, 0.8 in (Option 08) case length, 0.5 m (Option 05) total cable length, and a miniature male coaxial connector (Option 02). This transducer is part of the 7200 5 mm and 8 mm proximity transducer system, which utilizes the eddy current principle to provide non-contacting displacement measurement between the probe tip and the observed machine surface.\n\nThe system is designed for shaft vibration and axial position monitoring on critical rotating machinery, including gas turbines, steam turbines, compressors, and pumps. This 8 mm probe configuration is constructed of polyphenylene sulfide (PPS), a plastic capable of withstanding harsh, wet, or chemically active environments. It provides a linear measuring range of 80 mils (2 mm) with a scale factor of 200 mV\/mil (7.87 V\/mm). Probes are compatible with 7200 series Proximitor sensors and extension cables to complete the transducer loop.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8 mm diameter tip construction\u003c\/li\u003e\n\u003cli\u003ePolyphenylene sulfide (PPS) probe body for chemical resistance\u003c\/li\u003e\n\u003cli\u003eStandard mount configuration with 3\/8-24 threads\u003c\/li\u003e\n\u003cli\u003eOption 00: 0.0 in unthreaded length\u003c\/li\u003e\n\u003cli\u003eOption 08: 0.8 in case length\u003c\/li\u003e\n\u003cli\u003eOption 05: 0.5 m integral cable\u003c\/li\u003e\n\u003cli\u003eOption 02: Miniature male coaxial connector\u003c\/li\u003e\n\u003cli\u003eCompatible with 7200 series Proximitor sensors\u003c\/li\u003e\n\u003cli\u003eFrequency response of 0 Hz to 10 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration measurements for bearing condition monitoring\u003c\/li\u003e\n\u003cli\u003eAxial thrust position monitoring to detect bearing wear\u003c\/li\u003e\n\u003cli\u003eShaft average radial position (attitude angle) for rotor stability assessment\u003c\/li\u003e\n\u003cli\u003eVibration amplitude and phase angle for Polar and Bode diagnostic plots\u003c\/li\u003e\n\u003cli\u003eEccentricity measurements for rotor bow detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n\u003ctd\u003e21504-00-08-05-02\u003c\/td\u003e\n\u003ctd\u003e7200 8 mm Standard Mount Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA - Unthreaded Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003e0.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB - Overall Case Length\u003c\/td\u003e\n\u003ctd\u003e08\u003c\/td\u003e\n\u003ctd\u003e0.8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC - Total Cable Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD - Connector\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eMiniature male coaxial connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e21504-00-08-05-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Type\u003c\/td\u003e\n\u003ctd\u003e7200 8 mm Standard Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Diameter\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Thread\u003c\/td\u003e\n\u003ctd\u003e3\/8-24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e80 mils (2.0 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScale Factor\u003c\/td\u003e\n\u003ctd\u003e200 mV\/mil (7.87 V\/mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e0 to 10 kHz (-5% at 10 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature (Probe)\u003c\/td\u003e\n\u003ctd\u003e-30 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003eTo 95%, noncondensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the probe is installed in a secure mounting location to prevent vibration at the probe body.\u003c\/li\u003e\n\u003cli\u003eMaintain the specified gap from the target surface as per system calibration requirements.\u003c\/li\u003e\n\u003cli\u003eUse appropriate shielding for the coaxial cable to minimize electrical interference.\u003c\/li\u003e\n\u003cli\u003eEnsure the coaxial connector (Option 02) is clean and fully tightened during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with API 670 requirements\u003c\/li\u003e\n\u003cli\u003eSystem components are often certified by CSA, FM, and BASEEFA for specific hazardous location use (check site-specific installation documentation for current local regulatory compliance).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666529939819,"sku":"21504-00-08-05-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21504-00-08-05-02-probe-u34pf4hrrjt_437058f7-9c12-4cc1-9c6c-5d592cfb8068.jpg?v=1765440345","url":"https:\/\/www.plcprotech.com\/products\/bently-nevada-21504-00-08-05-02-5-mm-and-8-mm-standard-mount-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}