{"product_id":"bently-nevada-21504-00-52-10-02-5-mm-and-8-mm-standard-mount-probe","title":"Bently Nevada 21504-00-52-10-02 5 mm and 8 mm Standard Mount Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e21504-00-52-10-02\u003c\/strong\u003e is a 7200 series 8 mm standard mount proximity probe configured with a 0.0 in unthreaded length (Option 00), 5.2 in case length (Option 52), and 1.0 m total cable length (Option 10). This non-contacting, eddy-current transducer is designed for accurate measurement of both static and dynamic distances between the probe tip and the observed target, primarily for shaft position and vibration monitoring on rotating and reciprocating machinery.\u003c\/p\u003e\n\u003cp\u003eThis probe configuration includes a miniature male coaxial connector (Option 02) and is constructed from high-performance polyphenylene sulfide (PPS), suitable for environments where durability and chemical resistance are required. The system provides an 80 mil (2 mm) linear measuring range and is compatible with existing 7200 series Proximitor sensors and monitoring systems.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8 mm probe tip diameter for standard 7200 series applications\u003c\/li\u003e\n\u003cli\u003eOption 00: 0.0 in unthreaded probe body length\u003c\/li\u003e\n\u003cli\u003eOption 52: 5.2 in total case length\u003c\/li\u003e\n\u003cli\u003eOption 10: 1.0 m total integral cable length\u003c\/li\u003e\n\u003cli\u003eOption 02: Miniature male coaxial connector\u003c\/li\u003e\n\u003cli\u003eConstructed from high-performance PPS plastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration measurements for bearing condition monitoring\u003c\/li\u003e\n\u003cli\u003eAxial thrust position monitoring for thrust bearing wear indication\u003c\/li\u003e\n\u003cli\u003eShaft average radial position for rotor stability analysis\u003c\/li\u003e\n\u003cli\u003eEccentricity measurements for rotor bow detection\u003c\/li\u003e\n\u003cli\u003eGas and steam turbines, compressors, centrifuges, and large electric motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003cth\u003eOption\u003c\/th\u003e\n    \u003cth\u003eCode on This SKU\u003c\/th\u003e\n    \u003cth\u003eDescription\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n    \u003ctd\u003e21504-00-52-10-02\u003c\/td\u003e\n    \u003ctd\u003e7200 Series 8 mm Standard Mount Probe\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eA - Unthreaded Length\u003c\/td\u003e\n    \u003ctd\u003e00\u003c\/td\u003e\n    \u003ctd\u003e0.0 in (Minimum)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eB - Case Length\u003c\/td\u003e\n    \u003ctd\u003e52\u003c\/td\u003e\n    \u003ctd\u003e5.2 in\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eC - Total Length\u003c\/td\u003e\n    \u003ctd\u003e10\u003c\/td\u003e\n    \u003ctd\u003e1.0 m\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eD - Connector\u003c\/td\u003e\n    \u003ctd\u003e02\u003c\/td\u003e\n    \u003ctd\u003eWith miniature male coaxial connector\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003cth\u003eParameter\u003c\/th\u003e\n    \u003cth\u003eSpecification\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eManufacturer\u003c\/td\u003e\n    \u003ctd\u003eBently Nevada\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eModel \/ Part Number\u003c\/td\u003e\n    \u003ctd\u003e21504-00-52-10-02\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eSystem Type\u003c\/td\u003e\n    \u003ctd\u003e7200 Series 8 mm Proximity Transducer\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eLinear Range\u003c\/td\u003e\n    \u003ctd\u003e80 mils (2.0 mm)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eScale Factor\u003c\/td\u003e\n    \u003ctd\u003e200 mV\/mil (7.87 V\/mm)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n    \u003ctd\u003e-34 degC to +177 degC\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eBody Material\u003c\/td\u003e\n    \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eFrequency Response\u003c\/td\u003e\n    \u003ctd\u003e0 to 10 kHz\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the probe is mounted in a rigid bracket to prevent vibration-induced signal errors. Maintain the correct probe gap as specified by the machinery monitoring requirements. When routing the coaxial cable, avoid sharp bends and ensure the cable is secured to prevent abrasion or stress on the connector junction. For hazardous locations, verify the installation meets the specific requirements defined in Bently Nevada Data Sheet L1035 regarding system certification.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eCompatible with API 670 requirements. Certified by CSA, BASEEFA, and FM for use in specific hazardous locations (consult product documentation for current certificate status).\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666570113387,"sku":"21504-00-52-10-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-21504-00-52-10-02-probe-proximity-vibration-8mm-mb3ndq1j44w_72d509d4-891c-4f87-b75a-0c99b27d8b3c.jpg?v=1765440820","url":"https:\/\/www.plcprotech.com\/products\/bently-nevada-21504-00-52-10-02-5-mm-and-8-mm-standard-mount-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}