{"product_id":"bently-nevada-22810-00-05-05-00-7200-8-mm-standard-mount-probe","title":"Bently Nevada 22810-00-05-05-00 7200 8 mm Standard Mount Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e22810-00-05-05-00\u003c\/strong\u003e is an 8 mm Standard Mount Proximity Probe from the Bently Nevada 7200 Series. This configuration features a 3\/8-24 UNF threaded body with 0.0 in (0.0 mm) of unthreaded length (Option 00) and a 0.5 in (12.7 mm) case length (Option 05). It is equipped with a 0.5 m integral coaxial cable (Option 05) and is supplied without a connector (Option 00), designed for direct terminal connection in 7200 transducer systems.\u003c\/p\u003e\n\n\u003cp\u003eAs part of the 7200 Series, this eddy-current transducer system provides non-contacting shaft position and vibration measurements. It is constructed of polyphenylene sulfide (PPS), a high-performance plastic capable of withstanding industrial environments including water and lube oil. The probe is compatible with 7200 Series Proximitors and extension cables, facilitating radial vibration, axial thrust position, and eccentricity measurements on rotating machinery such as turbines, compressors, and pumps.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8 mm probe tip diameter constructed of polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e3\/8-24 UNF-2A standard mount thread configuration\u003c\/li\u003e\n\u003cli\u003eLinear measurement range of 80 mils (2.0 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with 7200 Series Proximitor sensors and extension cables\u003c\/li\u003e\n\u003cli\u003eNon-contacting eddy current measurement principle for DC (static) and AC (dynamic) signals\u003c\/li\u003e\n\u003cli\u003eScale factor of 200 mV\/mil (7.87 V\/mm)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range from -34 degC to +177 degC (-30 degF to +350 degF)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial vibration monitoring to detect rotor imbalance or misalignment\u003c\/li\u003e\n\u003cli\u003eAxial thrust position measurement for thrust bearing wear indication\u003c\/li\u003e\n\u003cli\u003eEccentricity measurement to monitor rotor bow\u003c\/li\u003e\n\u003cli\u003eShaft average radial position for rotor stability analysis\u003c\/li\u003e\n\u003cli\u003eTurbomachinery protection in power generation, petrochemical, and oil and gas industries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003cth\u003eOption\u003c\/th\u003e\n    \u003cth\u003eCode on This SKU\u003c\/th\u003e\n    \u003cth\u003eDescription\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n    \u003ctd\u003e22810-00-05-05-00\u003c\/td\u003e\n    \u003ctd\u003e7200 8 mm Standard Mount Probe\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eA - Unthreaded Length\u003c\/td\u003e\n    \u003ctd\u003e00\u003c\/td\u003e\n    \u003ctd\u003e0.0 in (0.0 mm)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eB - Case Length\u003c\/td\u003e\n    \u003ctd\u003e05\u003c\/td\u003e\n    \u003ctd\u003e0.5 in (12.7 mm)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eC - Total Cable Length\u003c\/td\u003e\n    \u003ctd\u003e05\u003c\/td\u003e\n    \u003ctd\u003e0.5 m (20 in) integral cable\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eD - Connector Option\u003c\/td\u003e\n    \u003ctd\u003e00\u003c\/td\u003e\n    \u003ctd\u003eWithout connector\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003cth\u003eParameter\u003c\/th\u003e\n    \u003cth\u003eSpecification\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eManufacturer\u003c\/td\u003e\n    \u003ctd\u003eBently Nevada\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eModel\u003c\/td\u003e\n    \u003ctd\u003e22810\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eProbe Diameter\u003c\/td\u003e\n    \u003ctd\u003e8 mm\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eThread\u003c\/td\u003e\n    \u003ctd\u003e3\/8-24 UNF-2A\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eMaterial\u003c\/td\u003e\n    \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eCalibrated Range\u003c\/td\u003e\n    \u003ctd\u003e80 mils (2.0 mm)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eScale Factor\u003c\/td\u003e\n    \u003ctd\u003e200 mV\/mil (7.87 V\/mm) +\/- 4%\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eFrequency Response\u003c\/td\u003e\n    \u003ctd\u003e0 Hz to 10 kHz\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n    \u003ctd\u003e-34 degC to +177 degC (-30 degF to +350 degF)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eLinearity\u003c\/td\u003e\n    \u003ctd\u003eWithin 0.8 mils (0.02 mm) of 200 mV\/mil straight line\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eHumidity\u003c\/td\u003e\n    \u003ctd\u003eTo 95%, noncondensing\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the probe is installed with adequate clearance from the observed target to maintain the 80 mils (2.0 mm) linear range. When routing the integral 0.5 m coaxial cable, avoid sharp bends and maintain separation from high-voltage AC power lines to prevent signal interference. Ensure all connections are secure and protected from physical damage. When used in hazardous locations, verify that the installation complies with local safety standards and the specific approvals (CSA, BASEEFA, FM) for the 7200 system.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eThe 7200 series transducers are designed to comply with API 670 requirements for vibration monitoring systems. Consult the Bently Nevada hazardous location datasheet for specific CSA, FM, and BASEEFA certification details applicable to the 22810 series.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666552942955,"sku":"22810-00-05-05-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-22810-00-05-05-00-interconnect-cable-dubd33ilvxy_d8458034-d671-4358-aff4-2048d24f216c.jpg?v=1765440595","url":"https:\/\/www.plcprotech.com\/products\/bently-nevada-22810-00-05-05-00-7200-8-mm-standard-mount-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}