{"product_id":"bently-nevada-330880-ru-50-028-03-02-proxpac-xl-proximity-transducer","title":"Bently Nevada 330880-RU-50-028-03-02 PROXPAC XL Proximity Transducer","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e330880-RU-50-028-03-02\u003c\/strong\u003e: This English configuration of the Bently Nevada PROXPAC XL Proximity Transducer features Option RU for Russian EAC \/ TR CU hazardous area approvals, a 5.0-inch standoff adapter length (Option 50), and a 2.8-inch probe penetration depth (Option 028). Standardized as an integrated solution, it combines a 3300 XL 8 mm proximity probe and a Proximitor sensor inside a single Polyphenylene Sulfide (PPS) thermoplastic housing, eliminating the need for separate extension cables or junction boxes.\u003c\/p\u003e\n\u003cp\u003eEquipped with Option 03 fittings, the assembly includes one 3\/4-14 NPT fitting, a 3\/4-14 NPT to 1\/2-14 NPT stainless steel reducer, and two plugs, mounting securely via a 3\/4-14 NPT thread (Option 02). This integrated transducer interfaces directly with 3300 XL monitoring system inputs over field wiring up to 305 meters, providing vibration and position measurements on rotating machinery where space, severe ambient conditions, or cable routing constraints restrict the use of discrete Proximitor housings.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProbe and Approvals Option RU: Integrates a 3300 XL 8 mm proximity probe certified under Russian EAC \/ TR CU hazardous area safety standards.\u003c\/li\u003e\n  \u003cli\u003eStandoff Adapter Option 50: Configured with a 5.0-inch (127 mm) standoff adapter to adjust probe positioning relative to the machine casing.\u003c\/li\u003e\n  \u003cli\u003eProbe Penetration Option 028: Provides 2.8 inches (71 mm) of sleeve penetration depth into the machinery housing.\u003c\/li\u003e\n  \u003cli\u003eFittings Option 03: Supplied as a kit containing one 3\/4-14 NPT conduit fitting, one 3\/4-14 NPT to 1\/2-14 NPT stainless steel reducer, and two blanking plugs.\u003c\/li\u003e\n  \u003cli\u003eMounting Thread Option 02: Outfitted with a 3\/4-14 NPT mounting thread, required for installations using a standoff adapter.\u003c\/li\u003e\n  \u003cli\u003eIntegrated Transducer Design: Houses both the proximity probe and the Proximitor sensor in one self-contained assembly, removing the intermediate extension cable.\u003c\/li\u003e\n  \u003cli\u003eRobust PPS Enclosure: Constructed from ultraviolet-resistant, glass-reinforced polyphenylene sulfide (PPS) containing conductive fibers for electrostatic dissipation.\u003c\/li\u003e\n  \u003cli\u003eHigh Environmental Protection: Rated for NEMA Type 4X and IP66 environments to protect internal circuitry against moisture and dust ingress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRadial shaft vibration and axial position measurements in heavy industrial rotating machinery.\u003c\/li\u003e\n  \u003cli\u003eMonitoring installations with severe environment exposures where separate extension cables are prone to damage.\u003c\/li\u003e\n  \u003cli\u003eSteam and gas turbines, compressors, gearboxes, and large industrial pumps.\u003c\/li\u003e\n  \u003cli\u003eHazardous area machinery protection in regions requiring Russian EAC\/TR CU certifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption\u003c\/th\u003e\n      \u003cth\u003eCode on This SKU\u003c\/th\u003e\n      \u003cth\u003eDescription\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOrderable Part Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003e330880-RU-50-028-03-02\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003ePROXPAC XL Proximity Transducer Assembly (English)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eA - Probe and Approvals\u003c\/td\u003e\n      \u003ctd\u003eRU\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm probe with Russian EAC \/ GOST-R \/ TR CU hazardous area approvals\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eB - Standoff Adapter\u003c\/td\u003e\n      \u003ctd\u003e50\u003c\/td\u003e\n      \u003ctd\u003e5.0 in (127 mm) standoff adapter length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eC - Probe Penetration\u003c\/td\u003e\n      \u003ctd\u003e028\u003c\/td\u003e\n      \u003ctd\u003e2.8 in (71 mm) probe sleeve penetration length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD - Fittings\u003c\/td\u003e\n      \u003ctd\u003e03\u003c\/td\u003e\n      \u003ctd\u003eOne 3\/4-14 NPT fitting, one 3\/4-14 NPT to 1\/2-14 NPT SST reducer, and two plugs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eE - Mounting Thread\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003e3\/4-14 NPT mounting thread\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModel\u003c\/td\u003e\n      \u003ctd\u003e330880-RU-50-028-03-02\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003ePROXPAC XL Proximity Transducer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInput Type\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm Proximity Probe (1-metre cable length installed in sleeve)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower Requirements\u003c\/td\u003e\n      \u003ctd\u003e-17.5 Vdc to -26 Vdc (without barriers) @ 12 mA max; -23 Vdc to -26 Vdc (with barriers)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOutput Resistance\u003c\/td\u003e\n      \u003ctd\u003e50 Ohm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLinear Range\u003c\/td\u003e\n      \u003ctd\u003e2 mm (80 mils), starting at approx. 0.25 mm (10 mils) from target\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOutput Voltage Range\u003c\/td\u003e\n      \u003ctd\u003eApprox. -1 Vdc to -17 Vdc over the linear range\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended Gap Setting\u003c\/td\u003e\n      \u003ctd\u003e1.27 mm (50 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncremental Scale Factor (ISF)\u003c\/td\u003e\n      \u003ctd\u003e7.87 V\/mm (200 mV\/mil) +\/- 5% (measured in 0.25 mm increments over 80 mil range, 0 degC to +45 degC)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDeviation from Straight Line (DSL)\u003c\/td\u003e\n      \u003ctd\u003eLess than +\/-0.025 mm (+\/-1 mil) at 0 degC to 45 degC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFrequency Response\u003c\/td\u003e\n      \u003ctd\u003e0 to 10 kHz: +0, -3 dB (with up to 305 metres \/ 1,000 feet of field wiring)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMinimum Target Size\u003c\/td\u003e\n      \u003ctd\u003e15.2 mm (0.6 in) diameter flat target\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMinimum Shaft Diameter\u003c\/td\u003e\n      \u003ctd\u003e50.8 mm (2.0 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended Shaft Diameter\u003c\/td\u003e\n      \u003ctd\u003e76.2 mm (3.0 in) minimum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHousing Material\u003c\/td\u003e\n      \u003ctd\u003eUV-resistant, glass-reinforced polyphenylene sulfide (PPS) thermoplastic with conductive fibers\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSleeve Material\u003c\/td\u003e\n      \u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRetaining Chain\u003c\/td\u003e\n      \u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOuter Sleeve \u0026amp; Retaining Screws\u003c\/td\u003e\n      \u003ctd\u003eAISI 303 stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSleeve O-Ring Material\u003c\/td\u003e\n      \u003ctd\u003eNeoprene\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGrounding Liner Material\u003c\/td\u003e\n      \u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVibration Isolation\u003c\/td\u003e\n      \u003ctd\u003eExtra Soft Cellular Silicone\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLid Label Material\u003c\/td\u003e\n      \u003ctd\u003eGloss Radiant White Polyester\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Temperature Range\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +177 degC (-62 degF to +351 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHousing \u0026amp; Proximitor Sensor Temp\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +100 degC (-62 degF to +212 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStorage Temperature Range\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +105 degC (-62 degF to +221 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRelative Humidity\u003c\/td\u003e\n      \u003ctd\u003e100% condensing, non-submersible when connectors are protected\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n      \u003ctd\u003eType 4X and IP66\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRetaining Nut Torque\u003c\/td\u003e\n      \u003ctd\u003e29.5 N-m (260 in-lb)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Sleeve Locknut Torque\u003c\/td\u003e\n      \u003ctd\u003e39.3 N-m (350 in-lb)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eTerminal\u003c\/th\u003e\n      \u003cth\u003eFunction\u003c\/th\u003e\n      \u003cth\u003eDescription\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVT \/ PWR\u003c\/td\u003e\n      \u003ctd\u003ePower Input\u003c\/td\u003e\n      \u003ctd\u003eNegative voltage supply connection (-17.5 Vdc to -26 Vdc)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCOM\u003c\/td\u003e\n      \u003ctd\u003eCommon\u003c\/td\u003e\n      \u003ctd\u003eCircuit common and signal ground reference\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOUT\u003c\/td\u003e\n      \u003ctd\u003eSignal Output\u003c\/td\u003e\n      \u003ctd\u003eProportional dynamic voltage output (-1 Vdc to -17 Vdc)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Thread the outer sleeve assembly (Option 02) into the 3\/4-14 NPT machinery casing port, ensuring the standoff adapter (Option 50) is properly positioned and tightened to a torque of 39.3 N-m (350 in-lb).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProbe Gapping:\u003c\/strong\u003e Adjust the probe depth within the sleeve (C sleeve depth of 2.8 inches) until the static output voltage reads approximately -10 Vdc, indicating the recommended gap of 1.27 mm (50 mils) from the target shaft surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConduit and Fittings:\u003c\/strong\u003e Route field wiring through the 3\/4-14 NPT to 1\/2-14 NPT stainless steel reducer (Option 03). Use suitable sealing methods on the conduit threads to keep moisture from travelling into the IP66-rated PPS housing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Ensure electrical continuity from the internal grounding liner of the housing to the machine casing to maintain shielding effectiveness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRussian EAC \/ TR CU Hazardous Area Certifications (Option RU)\u003c\/li\u003e\n  \u003cli\u003eCE Mark Compliance (EMC Directive 2014\/30\/EU; EN 61000-6-2, EN 61000-6-4)\u003c\/li\u003e\n  \u003cli\u003eRoHS Directive 2011\/65\/EU\u003c\/li\u003e\n  \u003cli\u003eHousing Environmental Rating: NEMA Type 4X and IP66 (BASEEFA verified)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666610155883,"sku":"330880-RU-50-028-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330880-ru-50-028-03-02-thermal-conductivity-transmitter-nljbyqcwdtn_14bc3df8-58c1-40df-b1fb-da715fcda1f6.jpg?v=1765444129","url":"https:\/\/www.plcprotech.com\/products\/bently-nevada-330880-ru-50-028-03-02-proxpac-xl-proximity-transducer","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}