{"product_id":"bently-nevada-330881-28-10-060-06-02-proxpac-xl-proximity-transducer","title":"Bently Nevada 330881-28-10-060-06-02 PROXPAC XL Proximity Transducer","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e330881-28-10-060-06-02\u003c\/strong\u003e specifies a metric PROXPAC XL proximity transducer assembly configured with an integrated 3300 XL 8 mm proximity probe featuring multiple hazardous area approvals (Option 28), a 100 mm standoff adapter (Option 10), and a 60 mm probe penetration length (Option 060).\u003c\/p\u003e\n\u003cp\u003eUnlike standard unapproved options, this configuration integrates the proximity probe and the 3300 XL Proximitor sensor directly into a single molded thermoplastic housing made of glass-reinforced polyphenylene sulfide (PPS). This design eliminates the requirement for separate extension cables and external housings, simplifying field installation by routing connections directly from the monitor to the field device. The housing provides IP66 and Type 4X environmental protection against harsh, corrosive, and wet conditions.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOption 28 specifies an integrated 3300 XL 8 mm proximity probe with Multiple Approvals.\u003c\/li\u003e\n  \u003cli\u003eOption 10 provides a 100 mm standoff adapter to accommodate specific structural clearance needs.\u003c\/li\u003e\n  \u003cli\u003eOption 060 sets the probe penetration sleeve length to exactly 60 mm.\u003c\/li\u003e\n  \u003cli\u003eOption 06 fittings configuration includes one 3\/4-14 NPT fitting, one 3\/4-14 NPT to 1-1\/2-14 NPT stainless steel reducer, and two plugs.\u003c\/li\u003e\n  \u003cli\u003eOption 02 designates a 3\/4-14 NPT mounting thread.\u003c\/li\u003e\n  \u003cli\u003eIntegrated Proximitor sensor built directly inside the housing lid, removing the need for a separate junction box.\u003c\/li\u003e\n  \u003cli\u003eMolded PPS thermoplastic housing contains conductive fibers to effectively dissipate electrostatic charges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRadial vibration and axial position measurements on rotating machinery.\u003c\/li\u003e\n  \u003cli\u003eCorrosive industrial environments requiring Type 4X and IP66 certified protection.\u003c\/li\u003e\n  \u003cli\u003eField monitoring setups requiring a simplified installation footprint with fewer cable runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption Segment\u003c\/th\u003e\n      \u003cth\u003eCode Value\u003c\/th\u003e\n      \u003cth\u003eMeaning \/ Configuration Detail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n      \u003ctd\u003e330881-28-10-060-06-02\u003c\/td\u003e\n      \u003ctd\u003eMetric PROXPAC XL Proximity Transducer Assembly\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eA - Probe and Approvals Option\u003c\/td\u003e\n      \u003ctd\u003e28\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm probe with Multiple Approvals\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eB - Standoff Adapter Option\u003c\/td\u003e\n      \u003ctd\u003e10\u003c\/td\u003e\n      \u003ctd\u003e100 mm standoff adapter length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eC - Probe Penetration Option\u003c\/td\u003e\n      \u003ctd\u003e060\u003c\/td\u003e\n      \u003ctd\u003e60 mm probe penetration length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD - Fittings Option\u003c\/td\u003e\n      \u003ctd\u003e06\u003c\/td\u003e\n      \u003ctd\u003eOne 3\/4-14 NPT fitting, one 3\/4-14 NPT to 1-1\/2-14 NPT stainless steel reducer, and two plugs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eE - Mounting Thread Option\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003e3\/4-14 NPT (required if ordering Standoff Adapter Option)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification Value\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModel \/ Part Number\u003c\/td\u003e\n      \u003ctd\u003e330881-28-10-060-06-02\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTransducer System Type\u003c\/td\u003e\n      \u003ctd\u003eIntegrated Proximity Transducer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Type\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm (integrated)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProximitor Sensor\u003c\/td\u003e\n      \u003ctd\u003eIntegrated in housing lid\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower Supply Range\u003c\/td\u003e\n      \u003ctd\u003eRequires -17.5 Vdc to -26 Vdc without barriers at 12 mA maximum; -23 Vdc to -26 Vdc with barriers\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLinear Range\u003c\/td\u003e\n      \u003ctd\u003e2 mm (80 mils), from approximately 0.25 mm to 2.3 mm (10 to 90 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncremental Scale Factor (ISF)\u003c\/td\u003e\n      \u003ctd\u003e7.87 V\/mm (200 mV\/mil) +\/-5% over linear range from 0 degC to +45 degC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOutput Resistance\u003c\/td\u003e\n      \u003ctd\u003e50 Ohm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFrequency Response\u003c\/td\u003e\n      \u003ctd\u003e0 to 10 kHz: +0, -3 dB (with up to 305 metres of field wiring)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHousing Material\u003c\/td\u003e\n      \u003ctd\u003eGlass-reinforced, UV-resistant polyphenylene sulfide (PPS) thermoplastic with conductive fibers\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n      \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Case Material\u003c\/td\u003e\n      \u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSleeve \/ Chain Material\u003c\/td\u003e\n      \u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eO-Ring Material\u003c\/td\u003e\n      \u003ctd\u003eNeoprene (sleeve O-ring), Viton (probe case pressure seal)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEnvironmental Protection\u003c\/td\u003e\n      \u003ctd\u003eType 4X, IP66\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating Temperature (Housing \u0026amp; Sensor)\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +100 degC (-62 degF to +212 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating Temperature (Probe Tip Only)\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +177 degC (-62 degF to +351 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eTerminal \/ Interface Type\u003c\/th\u003e\n      \u003cth\u003eDescription\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInternal Terminal Block\u003c\/td\u003e\n      \u003ctd\u003eAccepts field wiring directly to the built-in Proximitor sensor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSupported Wire Gauge\u003c\/td\u003e\n      \u003ctd\u003e0.2 to 1.5 mm2 (16 to 24 AWG) tinned field wiring\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended Wiring Type\u003c\/td\u003e\n      \u003ctd\u003e3-conductor shielded twisted-pair cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintain a recommended probe gap setting of 1.27 mm (50 mils) to establish the midpoint of the linear range.\u003c\/li\u003e\n  \u003cli\u003eEnsure the sleeve and cover O-rings are clean and properly seated during housing assembly to preserve the IP66 and Type 4X rating.\u003c\/li\u003e\n  \u003cli\u003eApply a tightening torque of 29.5 N-m (260 in-lb) to the retaining nut and 39.3 N-m (350 in-lb) to the probe sleeve locknut.\u003c\/li\u003e\n  \u003cli\u003eEnsure field wire shielding is correctly grounded in accordance with local safety and electrical standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompliant with European CE mark requirements.\u003c\/li\u003e\n  \u003cli\u003eCSA\/NRTL\/C Approved for hazardous areas.\u003c\/li\u003e\n  \u003cli\u003eATEX and IECEx certification codes: Ex ia IIC T4\/T5 Ga, Ex ec IIC T4\/T5 Gc, Ex ia IIIC T90C\/T105C Dc.\u003c\/li\u003e\n  \u003cli\u003eMolded housing certified to Type 4X and IP66 ratings against hose-directed water and dusty environments.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666736771435,"sku":"330881-28-10-060-06-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330881-28-10-060-06-02-proxpac-xl-proximity-transducer-jiwwut5vhjg_6f7c9a00-d99a-4c36-af65-45df80f36f94.jpg?v=1765446811","url":"https:\/\/www.plcprotech.com\/products\/bently-nevada-330881-28-10-060-06-02-proxpac-xl-proximity-transducer","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}