{"product_id":"bently-nevada-82926-01-3300-transducer-input-output-and-recorder-terminal-module","title":"Bently Nevada 82926-01 3300 Transducer Input\/Output and Recorder Terminal Module","description":"\u003cp\u003eThe \u003cstrong\u003e82926-01\u003c\/strong\u003e Transducer Input\/Output and Recorder Terminal Module is a rear-mounting backplane interface engineered for the Bently Nevada 3300\/20 Dual Thrust Position Monitor. This module supports two independent channels of continuous shaft axial position monitoring, processing raw DC gap voltage signals derived from proximity probe transducers to detect deviation relative to calibrated machine clearances. By establishing direct signal routing to the 3300 chassis bus, the hardware enables early warning of thrust bearing failure based on the position of the thrust collar relative to the axial bearing babbitt. The control logic of the associated monitor evaluates these dual-channel inputs against programmable alert and danger setpoints, providing isolated recorder terminal outputs for trend tracking and interfacing with emergency shutdown systems without on-board electro-mechanical relays.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e82926-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Monitor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300\/20 Dual Thrust Position Monitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Count\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Independent channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMonitored Parameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eShaft axial position \/ Thrust displacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSignal Input Interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eProximity probe transducer signals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRelay Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo on-board relays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApproximate Shipping Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.27 kg (5 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEngineering Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe module translates the transducer gap voltage into precise axial displacement metrics, measuring how far the shaft has shifted from its calibrated electrical zero point.\u003c\/li\u003e\n\u003cli\u003eTo achieve proper rotor dynamics representation, the external proximity probes must be installed to observe the thrust collar directly rather than an arbitrary shaft shoulder.\u003c\/li\u003e\n\u003cli\u003eBecause the 82926-01 does not include mechanical relays, any active automatic machinery trip functions must be executed via backplane communication to a dedicated 3300 series relay module.\u003c\/li\u003e\n\u003cli\u003eDisconnecting or miswiring the terminal block outputs will register as a transducer fault or an out-of-limit gap voltage error on the front display of the 3300\/20 monitor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImplement dedicated shield grounding protocols at the rear terminal strip by landing the proximity probe extension cable shield at the chassis ground terminal and isolating it at the sensor case.\u003c\/li\u003e\n\u003cli\u003eMaintain strict separation between low-voltage transducer input lines and high-voltage AC utility or control wiring to minimize electromagnetic noise injection into the thrust position loop.\u003c\/li\u003e\n\u003cli\u003eEnsure all terminal lug screws are securely torqued during commissioning to prevent drift in the 4-20 mA recorder loops or intermittent sensor faults caused by mechanical vibration.\u003c\/li\u003e\n\u003cli\u003eAlign the module pins perfectly with the 3300 rack backplane before inserting to avoid bending contacts or disrupting cyclic data exchange with adjacent modules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical \u0026amp; Procurement FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does the 82926-01 terminal module feature integrated mechanical relays for machinery interlocks?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: No, the 82926-01 is a passive transducer input\/output and recorder terminal module that passes signal states to the 3300 backplane, requiring a separate relay module for physical contact execution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can this terminal module be used to interface with radial vibration or casing velocity monitors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: No, this specific part number is designed and mapped exclusively to match the electrical and channel parameters of the 3300\/20 Dual Thrust Position Monitor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the purpose of the recorder terminals on this rear module?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: The recorder terminals provide dedicated, continuous analog outputs proportional to the measured shaft axial position, allowing for direct connection to external DCS or chart recorders.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666866499947,"sku":"82926-01","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-82926-01-i-o-and-record-terminals-relay-module-5onmhshp13c_f9312740-5fab-45b3-a3b6-9cfa1c7c35b5.jpg?v=1765449471","url":"https:\/\/www.plcprotech.com\/products\/bently-nevada-82926-01-3300-transducer-input-output-and-recorder-terminal-module","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}