{"product_id":"danfoss-060g3214-pressure-transmitter-mbs-series","title":"Danfoss 060G3214 Pressure Transmitter MBS Series","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDanfoss 060G3214 (060G3214)\u003c\/strong\u003e is a high-precision pressure transmitter designed for demanding industrial environments where accurate, stable pressure feedback is critical for process optimization. By delivering a linearized 4-20 mA output signal, this transmitter minimizes system latency and ensures precise control in applications such as HVAC systems, hydraulic power units, and general industrial process monitoring. Its robust, flush-diaphragm construction is specifically optimized to prevent clogging in media-heavy environments, significantly reducing maintenance frequency and preventing unplanned system downtime.\u003c\/p\u003e\n\u003ch3\u003eTechnical Configuration\u003c\/h3\u003e\n\u003cp\u003eThis transmitter features an advanced sensing architecture that provides a typical accuracy of 0.3 percent of the full scale. The device is built for resilience, boasting an IP65-rated enclosure that ensures protection against moisture and particulates. The integration of a standard DIN-plug (EN 175301-803-A) facilitates rapid field integration and maintenance. Engineered for high-speed operation, the device maintains a rapid response time of less than 4 ms, making it ideal for monitoring transient pressure spikes in dynamic fluid power circuits. It is certified for ATEX-compliant environments, ensuring safe operation in designated hazardous areas.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eFeature\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e060G3214\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDanfoss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDenmark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e0.246 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure Range\u003c\/td\u003e\n\u003ctd\u003e0 to 16 bar (0 to 232.06 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Signal\u003c\/td\u003e\n\u003ctd\u003e4 to 20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e9 to 32 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy (Typical)\u003c\/td\u003e\n\u003ctd\u003e0.3 % FS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResponse Time\u003c\/td\u003e\n\u003ctd\u003e4 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIP 65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd\u003e-10 to 85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure Connection\u003c\/td\u003e\n\u003ctd\u003e1\/2 inch (Flush Diaphragm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the flush diaphragm feature important for my application?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe flush diaphragm design is specifically intended for viscous or particle-laden media. Unlike standard recessed diaphragms, it prevents dead zones where residue can accumulate, harden, and lead to signal drift or total blockage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this transmitter suitable for explosive atmospheres?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the 060G3214 carries ATEX approval, allowing it to be utilized in specific hazardous zone installations. Always refer to the official datasheet for the exact zone classification and safety parameters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the low clipping level function?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe low clipping level of 3.6 mA acts as a diagnostic threshold, signaling to the controller that the measured pressure is below the calibrated range or that a potential sensor fault exists, allowing for automated system safety shutdowns.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the recommended cable specification for the DIN-plug connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe recommend using shielded, twisted-pair instrumentation cable to maintain signal integrity and prevent electromagnetic interference from nearby industrial drives or high-voltage lines.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Operational Best Practices\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush Diaphragm Protection:\u003c\/strong\u003e During installation, exercise extreme caution to avoid damaging the exposed sensing diaphragm. Do not use sharp tools to clean the face. Ensure the process fitting is clean and the seal is properly seated to prevent leaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Grounding:\u003c\/strong\u003e To achieve maximum accuracy, ensure the transmitter housing is properly grounded to the system chassis. In high-noise environments, connect the cable shield to the ground at the control cabinet end only to prevent ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque Specifications:\u003c\/strong\u003e Use a 27 mm wrench on the designated hexagonal section when tightening the pressure connection. Do not apply force to the transmitter housing during installation, as this can induce internal mechanical stress and compromise the calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Management:\u003c\/strong\u003e While the device is rated for ambient temperatures up to 85 deg C, avoid mounting the transmitter in direct proximity to high-heat sources (such as steam lines or furnace walls) to prevent long-term electronic degradation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Danfoss","offers":[{"title":"Default Title","offer_id":53102410137963,"sku":"060G3214","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/060g3214-hwmo215bfn3.png?v=1776136940","url":"https:\/\/www.plcprotech.com\/products\/danfoss-060g3214-pressure-transmitter-mbs-series","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}