{"product_id":"ge-fanuc-ic695cpu310-pacsystems-rx3i-central-processing-unit","title":"GE Fanuc IC695CPU310 PACSystems RX3i Central Processing Unit","description":"\u003ch4\u003eDescription \u003c\/h4\u003e\n\u003cp\u003eThe GE Fanuc IC695CPU310 is a Programmable Automation Controller (PAC) central processing unit used as the central processing unit in PACSystems RX3i systems. Powered by a 300 MHz processor, this unit functions as the primary control node within the \u003cstrong\u003ePACSystems RX3i\u003c\/strong\u003e automation platform. It provides advanced processing speed, execution times as fast as 0.195 ms per 1000 Boolean instructions, and flexible program execution.\u003c\/p\u003e\n\u003cp\u003eFeaturing a dual backplane architecture, the \u003cstrong\u003eIC695CPU310\u003c\/strong\u003e module supports both high-speed PCI backplane communications for fast throughput of advanced RX3i I\/O and standard serial backplane channels. This dual structure facilitates legacy system migration, enabling compatibility with existing Series 90-30 I\/O modules and expansion racks. Program and configuration data are stored in 10 Megabytes of battery-backed CMOS RAM, supplemented by 10 Megabytes of embedded non-volatile flash memory.\u003c\/p\u003e\n\u003cp\u003eThe CPU features integrated communication options, including two on-board serial interfaces supporting Modbus RTU Slave, SNP Slave, and Serial I\/O protocols. For networked control systems, it integrates with rack-based Ethernet modules, enabling Ethernet Global Data (EGD) exchange and SNTP time synchronization. System firmware is upgradeable in-system via the primary serial port using flash storage.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDriven by a 300 MHz processor with a typical Boolean execution speed of 0.195 ms per 1000 instructions.\u003c\/li\u003e\n\u003cli\u003eDual backplane capability supporting high-speed RX3i PCI and Series 90-30 style serial backplanes for legacy I\/O migration.\u003c\/li\u003e\n\u003cli\u003eEquipped with 10 Mbytes of battery-backed user CMOS RAM and 10 Mbytes of internal non-volatile flash user memory.\u003c\/li\u003e\n\u003cli\u003eOn-board serial communication interfaces featuring one RS-232 port (COM1) and one RS-485 port (COM2).\u003c\/li\u003e\n\u003cli\u003eSupports Modbus RTU Slave, SNP Slave, and Serial I\/O protocols.\u003c\/li\u003e\n\u003cli\u003eAccommodates up to 512 program blocks with a maximum block size of 128 KB.\u003c\/li\u003e\n\u003cli\u003eMulti-language programming support including Ladder Diagram (LD), Structured Text (ST), Function Block Diagram (FBD), and C language.\u003c\/li\u003e\n\u003cli\u003eFlexible reference tables including 32 Kbits for discrete %I and %Q, up to 32 Kwords for analog %AI and %AQ, and bulk memory access via reference table %W.\u003c\/li\u003e\n\u003cli\u003eIntegrated diagnostic LED indicators displaying CPU status, RUN, Output state, I\/O Force, Battery status, System Fault, and serial activity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOrdering Information\u003c\/h4\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eCatalog Number\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIC695CPU310\u003c\/td\u003e\n\u003ctd\u003ePACSystems RX3i VME 300 MHz Central Processing Unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIC698ACC701\u003c\/td\u003e\n\u003ctd\u003eLithium Smart Battery Pack (Standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIC693ACC302\u003c\/td\u003e\n\u003ctd\u003eSeries 90-30 Auxiliary Battery Module (Optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIC200CBL001\u003c\/td\u003e\n\u003ctd\u003eRS-232 Serial Cable (Optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIC695CHS012\u003c\/td\u003e\n\u003ctd\u003eRX3i Standard 12-Slot Universal Backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIC695CHS016\u003c\/td\u003e\n\u003ctd\u003eRX3i Standard 16-Slot Universal Backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIC695PSA040\u003c\/td\u003e\n\u003ctd\u003eRX3i Power Supply 40 Watt High Capacity Universal AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIC695PSD040\u003c\/td\u003e\n\u003ctd\u003eRX3i Power Supply 40 Watt High Capacity 24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral\u003c\/strong\u003e\u003c\/p\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc \/ Emerson Automation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003ePACSystems RX3i\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eCentral Processing Unit (CPU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eIC695CPU310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eRequires 2 rack slots in Rack 0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhysical Weight\u003c\/td\u003e\n\u003ctd\u003e1.50 lbs (0.68 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance \u0026amp; Processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor Speed\u003c\/td\u003e\n\u003ctd\u003e300 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoolean Execution Speed\u003c\/td\u003e\n\u003ctd\u003e0.195 ms per 1000 Boolean contacts\/coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloating Point Support\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitchover Time\u003c\/td\u003e\n\u003ctd\u003eMaximum 1 logic scan, minimum 3.133 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTime of Day Clock Accuracy\u003c\/td\u003e\n\u003ctd\u003eMaximum drift of 2 seconds per day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Timing Accuracy\u003c\/td\u003e\n\u003ctd\u003e0.01% maximum elapsed time clock accuracy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003cp\u003e\u003cstrong\u003eMemory \u0026amp; Program Limits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUser RAM Memory\u003c\/td\u003e\n\u003ctd\u003e10 Mbytes battery-backed CMOS RAM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUser Flash Memory\u003c\/td\u003e\n\u003ctd\u003e10 Mbytes built-in non-volatile flash memory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Program Blocks\u003c\/td\u003e\n\u003ctd\u003eUp to 512 blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Block Size\u003c\/td\u003e\n\u003ctd\u003e128 KB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiscrete Addressing (%I \/ %Q)\u003c\/td\u003e\n\u003ctd\u003eUp to 32 Kbits each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Addressing (%AI \/ %AQ)\u003c\/td\u003e\n\u003ctd\u003eConfigurable up to 32 Kwords each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulk Memory (%W)\u003c\/td\u003e\n\u003ctd\u003eConfigurable up to maximum available user RAM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSymbolic Variables\u003c\/td\u003e\n\u003ctd\u003eConfigurable up to 10 Mbytes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical \u0026amp; Environmental\u003c\/strong\u003e\u003c\/p\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e1.25 Amps at +3.3 VDC nominal; 1.0 Amps at +5 VDC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 to 60 Celsius (32 to 140 Fahrenheit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Type\u003c\/td\u003e\n\u003ctd\u003eIC698ACC701 Lithium Smart Battery Pack (or Matsushita BR2477A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003cp\u003e\u003cstrong\u003eCommunication \u0026amp; Interfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmbedded Serial Interfaces\u003c\/td\u003e\n\u003ctd\u003e1x RS-232 (Port 1 \/ COM1), 1x RS-485 (Port 2 \/ COM2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial Protocols Supported\u003c\/td\u003e\n\u003ctd\u003eModbus RTU Slave, SNP Slave, Serial I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial Baud Rates\u003c\/td\u003e\n\u003ctd\u003e1200 to 115.2K baud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Cable Distance\u003c\/td\u003e\n\u003ctd\u003eRS-232: 15 m (50 ft); RS-485: 1200 m (4000 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBackplane Compatibility\u003c\/td\u003e\n\u003ctd\u003eDual backplane support: RX3i PCI (PCI 2.2 compliant) and 90-30 serial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Support\u003c\/td\u003e\n\u003ctd\u003eRack-based via IC695ETM001 Ethernet Interface Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEGD Exchanges\u003c\/td\u003e\n\u003ctd\u003eSupports up to 255 simultaneous Ethernet Global Data exchanges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware \u0026amp; Firmware\u003c\/strong\u003e\u003c\/p\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProgramming Languages\u003c\/td\u003e\n\u003ctd\u003eLadder Diagram (LD), Structured Text (ST), Function Block Diagram (FBD), C language\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProgramming Tool Requirement\u003c\/td\u003e\n\u003ctd\u003eProficy Machine Edition Logic Developer 5.0 or later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware Upgrade Method\u003c\/td\u003e\n\u003ctd\u003eIn-system flash upgrade via serial port using WinLoader\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch4\u003eConnections \/ Interfaces\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePort 1 (COM1) - RS-232 Interface\u003c\/strong\u003e Female 9-pin D-sub connector (DCE Configuration):\u003c\/p\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003ePin Number\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSignal Name\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eNC\u003c\/td\u003e\n\u003ctd\u003eNo Connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eTXD\u003c\/td\u003e\n\u003ctd\u003eTransmit Data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eRXD\u003c\/td\u003e\n\u003ctd\u003eReceive Data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eDSR\u003c\/td\u003e\n\u003ctd\u003eData Set Ready\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e0V\u003c\/td\u003e\n\u003ctd\u003eSignal Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eDTR\u003c\/td\u003e\n\u003ctd\u003eData Terminal Ready\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003eClear To Send\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eRTS\u003c\/td\u003e\n\u003ctd\u003eRequest To Send\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eNC\u003c\/td\u003e\n\u003ctd\u003eNo Connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003cp\u003e\u003cstrong\u003ePort 2 (COM2) - RS-485 Interface\u003c\/strong\u003e Female 15-pin D-sub connector (DCE Configuration):\u003c\/p\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003ePin Number\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSignal Name\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eShield\u003c\/td\u003e\n\u003ctd\u003eCable Shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2, 3, 4\u003c\/td\u003e\n\u003ctd\u003eNC\u003c\/td\u003e\n\u003ctd\u003eNo Connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e+5VDC\u003c\/td\u003e\n\u003ctd\u003eLogic Power (300mA maximum isolated power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eRTS(A)\u003c\/td\u003e\n\u003ctd\u003eDifferential Request To Send\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003e0V\u003c\/td\u003e\n\u003ctd\u003eSignal Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eCTS(B')\u003c\/td\u003e\n\u003ctd\u003eDifferential Clear To Send\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eRT\u003c\/td\u003e\n\u003ctd\u003eResistor Termination (Jumper to Pin 10 for line termination)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003eRD(A')\u003c\/td\u003e\n\u003ctd\u003eDifferential Receive Data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003eRD(B')\u003c\/td\u003e\n\u003ctd\u003eDifferential Receive Data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003eSD(A)\u003c\/td\u003e\n\u003ctd\u003eDifferential Send Data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003eSD(B)\u003c\/td\u003e\n\u003ctd\u003eDifferential Send Data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003eRTS(B)\u003c\/td\u003e\n\u003ctd\u003eDifferential Request To Send\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003eCTS(A')\u003c\/td\u003e\n\u003ctd\u003eDifferential Clear To Send\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch4\u003eConfiguration and Commissioning\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware Configuration:\u003c\/strong\u003e Use Proficy Machine Edition Logic Developer-PLC to build and transfer system configuration and user logic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode Switch Control:\u003c\/strong\u003e Use the front panel three-position switch to select the operating state: RUN I\/O ENABLED, RUN OUTPUT DISABLE, or STOP. Operating mode can also be controlled remotely via programming software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParameter \u0026amp; Program Storage:\u003c\/strong\u003e Always ensure that hardware configuration and user logic are written to RAM prior to performing a write to non-volatile flash memory to guarantee proper power-up sequence from flash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware Flashing:\u003c\/strong\u003e Connect the programming PC to the CPU RS-232 serial port (COM1) running the WinLoader utility. Ensure the CPU is set to STOP mode with I\/O disabled during direct firmware upgrades.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"General Electric","offers":[{"title":"Default Title","offer_id":52695424926059,"sku":"IC695CPU310","price":4000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/IC695CPU310_004_1200x1200_790de386-2ad8-421b-be9e-03389da8a0b9.webp?v=1789561318","url":"https:\/\/www.plcprotech.com\/products\/ge-fanuc-ic695cpu310-pacsystems-rx3i-central-processing-unit","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}