{"product_id":"bently-nevada-330706-05-46-10-02-00-3300-xl-11-mm-reverse-mount-probe","title":"Bently Nevada 330706-05-46-10-02-00 3300 XL 11 mm Reverse Mount Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eOption 05 (5 mm unthreaded length) and Option 02 (Miniature ClickLoc coaxial connector, standard cable) specify this 3300 XL 11 mm reverse mount probe configuration — \u003cstrong\u003e330706-05-46-10-02-00\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis metric reverse mount probe configuration features M10 x 1 threads, allowing for direct mechanical installation through machine housings or specialized mounting sleeves where standard threading is not applicable. It pairs with a 3300 XL 11 mm extension cable and Proximitor sensor for non-contacting vibration and displacement measurement. Unlike variants with longer integrated cable runs like 5.0-meter or 9.0-meter probes, this 1.0-meter cable configuration minimizes internal machinery cable routing, connecting to an external extension cable immediately outside the machine casing. It does not carry hazardous area certifications, making it ideal for standard safe-area industrial environments.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMetric M10 x 1 reverse mount threading allows for secure direct installation through external machine cases.\u003c\/li\u003e\n  \u003cli\u003eShort 5 mm unthreaded length (Option 05) paired with a 46 mm overall case length (Option 46) is ideal for low-profile envelopes.\u003c\/li\u003e\n  \u003cli\u003eCompact 1.0-meter (3.3 feet) integrated FEP-insulated probe cable (Option 10) prevents excess cable slack inside the machine.\u003c\/li\u003e\n  \u003cli\u003eGold-plated brass Miniature ClickLoc coaxial connector (Option 02) locks into place, preventing loose connections due to vibration.\u003c\/li\u003e\n  \u003cli\u003eOption 00 indicates that agency approvals are not required, matching safe-area machine configurations.\u003c\/li\u003e\n  \u003cli\u003eHigh-strength TipLoc molding provides a structural bond between the polyphenylene sulfide (PPS) probe tip and the AISI 304 stainless steel case.\u003c\/li\u003e\n  \u003cli\u003eCableLoc design provides up to 330 N (75 lb) of cable-to-probe-tip pull strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAxial (thrust) position measurements on steam turbines and other heavy rotating machinery.\u003c\/li\u003e\n  \u003cli\u003eRadial vibration and position monitoring in fluid-film bearing environments.\u003c\/li\u003e\n  \u003cli\u003eRamp differential expansion measurements on industrial turbomachinery.\u003c\/li\u003e\n  \u003cli\u003eRod position or rod drop monitoring on large reciprocating compressors.\u003c\/li\u003e\n  \u003cli\u003eSpeed sensing, tachometer, and Keyphasor phase reference signal generation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption \/ Segment\u003c\/th\u003e\n      \u003cth\u003eCode on This SKU\u003c\/th\u003e\n      \u003cth\u003eDescription\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eBase Model Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330706\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 11 mm Reverse Mount Probe, M10 x 1 threads\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eA - Unthreaded Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003e5 mm unthreaded length (corresponds to AAA option 005)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eB - Case Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e46\u003c\/td\u003e\n      \u003ctd\u003e46 mm overall case length (corresponds to BBB option 046)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eC - Total Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e10\u003c\/td\u003e\n      \u003ctd\u003e1.0 meter (3.3 feet) total integrated cable length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eD - Connector Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eE - Agency Approval Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e00\u003c\/td\u003e\n      \u003ctd\u003eAgency approvals not required\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eValue \/ Specification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePart Number\u003c\/td\u003e\n      \u003ctd\u003e330706-05-46-10-02-00\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Type\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 11 mm Reverse Mount Probe\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLinear Range\u003c\/td\u003e\n      \u003ctd\u003e4.0 mm (160 mils), beginning at approximately 0.5 mm (20 mils) from the target\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSystem Calibration\u003c\/td\u003e\n      \u003ctd\u003eCalibrated to AISI 4140 steel target (standard)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eScale Factor (Incremental)\u003c\/td\u003e\n      \u003ctd\u003e3.94 V\/mm (100 mV\/mil) +\/-10% (over standard linear range)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDeviation from Straight Line (DSL)\u003c\/td\u003e\n      \u003ctd\u003eLess than +\/-0.10 mm (+\/-4 mils) at standard temperatures; less than +\/-0.15 mm (+\/-6 mils) at extended temperatures\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFrequency Response\u003c\/td\u003e\n      \u003ctd\u003e0 to 8 kHz: +0, -3 dB typical (with up to 305 meters of field wiring)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended Gap Setting\u003c\/td\u003e\n      \u003ctd\u003e2.5 mm (100 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread Specification\u003c\/td\u003e\n      \u003ctd\u003eMetric M10 x 1 threads\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCable Type\u003c\/td\u003e\n      \u003ctd\u003e75 ohm triaxial, fluoroethylene propylene (FEP) insulated (non-armored)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConnector Type\u003c\/td\u003e\n      \u003ctd\u003eGold-plated brass Miniature coaxial ClickLoc connector\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n      \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Case Material\u003c\/td\u003e\n      \u003ctd\u003eAISI 304 stainless steel (SST)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Case Torque\u003c\/td\u003e\n      \u003ctd\u003e7.5 N-m (66 in-lb) recommended; 22.6 N-m (200 in-lb) maximum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTensile Strength\u003c\/td\u003e\n      \u003ctd\u003e330 N (75 lb) probe case to probe lead; 270 N (60 lb) at probe lead to extension cable connectors\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMinimum Cable Bend Radius\u003c\/td\u003e\n      \u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +177 degC (-62 degF to +351 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePressure Seal Rating\u003c\/td\u003e\n      \u003ctd\u003eDifferential pressure sealed with integrated Viton O-ring\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRelative Humidity\u003c\/td\u003e\n      \u003ctd\u003e100% condensing, non-submersible when connectors are protected\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eWhen installing this reverse mount probe, verify that the mechanical threads (M10 x 1) are clean and free of burrs. Gently thread the probe body into the reverse mount bracket or sleeve from the back. Set the probe gap to the recommended nominal distance of 2.5 mm (100 mils) using a micrometer or by reading the voltage from the Proximitor sensor's test points. Tighten to the recommended installation torque of 7.5 N-m (66 in-lb), taking care not to exceed the maximum rated torque of 22.6 N-m (200 in-lb). Maintain a cable bend radius of at least 25.4 mm (1.0 in) throughout the cable routing path to protect the internal triaxial conductors. Ensure ClickLoc connections are protected from machine fluids and moisture with the provided silicone tape or a dedicated connector protector kit.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eStandard \/ Directive\u003c\/th\u003e\n      \u003cth\u003eCompliance Classification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEuropean Community Directive\u003c\/td\u003e\n      \u003ctd\u003eEMC Directive 2014\/30\/EU\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIndustrial Immunity\u003c\/td\u003e\n      \u003ctd\u003eEN 61000-6-2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIndustrial Emissions\u003c\/td\u003e\n      \u003ctd\u003eEN 61000-6-4\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRoHS Compliance\u003c\/td\u003e\n      \u003ctd\u003eEuropean Directive 2011\/65\/EU\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eChina RoHS\u003c\/td\u003e\n      \u003ctd\u003eEFUP 15 years (SJ\/T 11364-2024 standard)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666548846955,"sku":"330706-05-46-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330706-05-46-10-02-00-sensor-uj1czo4lty3_39b0fecc-acd9-4505-8228-546f9ff41a63.jpg?v=1765440562","url":"https:\/\/www.plcprotech.com\/pt\/products\/bently-nevada-330706-05-46-10-02-00-3300-xl-11-mm-reverse-mount-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}