{"product_id":"bently-nevada-330901-00-52-10-02-05-3300-nsv-proximity-probe","title":"Bently Nevada 330901-00-52-10-02-05 3300 NSv Proximity Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e330901-00-52-10-02-05\u003c\/strong\u003e is a \u003cstrong\u003e3300 NSv proximity probe\u003c\/strong\u003e designed with a 1\/4-28 UNF-2A thread and no stainless steel armor. This configuration is defined by Option 00, indicating a 0.0-inch unthreaded length (fully threaded case), and Option 52, specifying a 5.2-inch overall case length. The probe is equipped with a 1.0-meter (39-inch) standard integrated FEP coaxial cable (Option 10) terminated in a miniature ClickLoc connector without a connector protector (Option 02). To support installation in hazardous industrial atmospheres, this unit is supplied with Option 05 Multiple Approvals, which certifies it for global intrinsically safe and non-incendive environments.\u003c\/p\u003e\n\u003cp\u003eThe 3300 NSv (Near Side vibration) transducer system is engineered for micro-displacement and vibration monitoring in applications with restricted spatial envelopes or small target geometries. Unlike standard 8 mm probes that require larger targets to prevent field distortion, the narrower footprint of this probe operates effectively on target shaft diameters down to 20 mm (0.8 in) or smaller. This configuration is widely utilized in high-speed aeroderivative gas turbines, radial vibration monitoring of small bearings, and axial position tracking where traditional sensors cannot physically fit or would cause electromagnetic cross-talk.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreaded Case Design: 1\/4-28 UNF-2A thread configuration with a 5.2-inch case length and 0.0-inch unthreaded length for maximum thread engagement.\u003c\/li\u003e\n\u003cli\u003eUnarmored Cable Assembly: Includes a 1.0-meter standard integrated FEP coaxial cable without external stainless steel armor.\u003c\/li\u003e\n\u003cli\u003eClickLoc Connector: Terminated with a miniature coaxial ClickLoc male connector for secure, low-loss coupling to extension cables.\u003c\/li\u003e\n\u003cli\u003eHazardous Area Approvals: Equipped with Option 05 Multiple Approvals, providing certified safety compliance for hazardous zone applications.\u003c\/li\u003e\n\u003cli\u003eTarget Optimization: Specially calibrated to provide linear displacement readings on small shaft diameters and narrow targets without field distortion.\u003c\/li\u003e\n\u003cli\u003eRobust Construction: Features a high-integrity polyphenylene sulfide (PPS) tip molded directly to an AISI 304 stainless steel probe body.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadial shaft vibration and axial position measurements on small-bore high-speed rotating machinery.\u003c\/li\u003e\n\u003cli\u003eBearing housing and rotor displacement monitoring in aeroderivative gas turbines and compact industrial compressors.\u003c\/li\u003e\n\u003cli\u003eProximity measurement applications where adjacent sensors must be mounted closely without cross-talk interference.\u003c\/li\u003e\n\u003cli\u003eVibration detection on target geometries narrower than standard 8 mm probe constraints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003eThe table below provides the full decoding structure of the 330901-00-52-10-02-05 proximity probe configuration based on the official manufacturer documentation:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eOption Segment\u003c\/th\u003e\n\u003cth\u003eCode on This SKU\u003c\/th\u003e\n\u003cth\u003eDescription \/ Parameter Value\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBase Model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e330901\u003c\/td\u003e\n\u003ctd\u003e3300 NSv Probe, 1\/4-28 UNF thread, without armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eA - Unthreaded Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003e0.0 in (fully threaded probe case)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eB - Case Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52\u003c\/td\u003e\n\u003ctd\u003e5.2 in (132 mm) overall case length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eC - Total Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 meter (39 in) total cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD - Connector and Cable Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector, standard FEP cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eE - Agency Approval\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003eMultiple Approvals (including ATEX, IECEx, and CSA certifications)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification Parameter\u003c\/th\u003e\n\u003cth\u003eDetails and Ratings\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number \/ SKU\u003c\/td\u003e\n\u003ctd\u003e330901-00-52-10-02-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Nominal Diameter\u003c\/td\u003e\n\u003ctd\u003e3300 NSv (nominal 5 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Specification\u003c\/td\u003e\n\u003ctd\u003e1\/4-28 UNF-2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e1.5 mm (60 mils), spanning from 0.25 mm to 1.75 mm (10 mils to 70 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncremental Scale Factor (ISF)\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil) typical over linear range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeviation from Best Fit Straight Line (DSL)\u003c\/td\u003e\n\u003ctd\u003eLess than +\/-0.06 mm (+\/-2.3 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard Gap Setting\u003c\/td\u003e\n\u003ctd\u003e1.0 mm (40 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Frequency Response\u003c\/td\u003e\n\u003ctd\u003e0 to 10 kHz: +0, -3 dB typical (with up to 305 meters of field wiring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable Material\u003c\/td\u003e\n\u003ctd\u003e75 ohm coaxial, fluoroethylene propylene (FEP) insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe DC Resistance (R_PROBE)\u003c\/td\u003e\n\u003ctd\u003e4.2 +\/-0.5 ohms (for 1.0 m probe length option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-52 degC to +177 degC (-62 degF to +351 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Pressure Sealing\u003c\/td\u003e\n\u003ctd\u003eViton O-ring pressure seal (sustains seal down to -34 degC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Tensile Strength\u003c\/td\u003e\n\u003ctd\u003e220 N (50 lb) probe case to probe lead; 220 N (50 lb) lead to extension cable connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Target Size\u003c\/td\u003e\n\u003ctd\u003e8.9 mm (0.35 in) diameter; 13 mm (0.5 in) recommended minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMaintain the minimum bend radius of the integrated FEP coaxial cable at 25.4 mm (1.0 in) to prevent damage to the inner conductor shielding. Adjust the physical probe gap using a feeler gauge, or monitor the DC voltage output of the companion Proximitor Sensor until it reads approximately -9.0 Vdc (corresponding to the nominal 1.0 mm or 40 mil gap). When installing the probe, ensure that the total length of the probe and extension cable equals the required system length of the Proximitor Sensor (either 5 or 7 meters). Avoid routing the high-impedance transducer cable adjacent to high-voltage AC lines to minimize electromagnetic interference.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEuropean Community Directives: EMC Directive 2014\/30\/EU, RoHS Directive 2011\/65\/EU\u003c\/li\u003e\n\u003cli\u003eEMC Standards: EN 61000-6-2 (Industrial Immunity), EN 61000-6-4 (Industrial Emissions)\u003c\/li\u003e\n\u003cli\u003eFunctional Safety: Certified SIL 2 (HFT = 0), SIL 3 (HFT = 1) capability\u003c\/li\u003e\n\u003cli\u003eHazardous Area Ratings (Option 05 Multiple Approvals): ATEX\/IECEx Ex ia IIC T5...T1 Ga, Ex ia IIIC T90 degC...T280 degC Dc, Ex nA IIC T5...T1 Gc, Ex ec IIC T5...T1 Gc; Class I, Div 1 \u0026amp; 2, Groups A, B, C, D; Class II, Groups E, F, G; Class III\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666566279531,"sku":"330901-00-52-10-02-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330901-00-52-10-02-05-3300-nsv-proximity-probes-af2ub1d022p_ba4f4369-3f9b-4920-ac63-b481efa81dca.jpg?v=1765440744","url":"https:\/\/www.plcprotech.com\/tr\/products\/bently-nevada-330901-00-52-10-02-05-3300-nsv-proximity-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}