{"product_id":"bently-nevada-330908-22-31-10-01-05-3300-nsv-proximity-probes","title":"Bently Nevada 330908-22-31-10-01-05 3300 NSv Yakınlık Probları","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e330908-22-31-10-01-05\u003c\/strong\u003e: 3300 NSv proximity probe, 3\/8-24 UNF thread, Option 22 unthreaded length of 2.2 inches, Option 31 overall case length of 3.1 inches, Option 10 total length of 1.0 meter, Option 01 ClickLoc connector with connector protector, and Option 05 Multiple Approvals. This specific configuration features a 3\/8-24 UNF thread without armor, designed for non-contact displacement measurements in areas with restricted clearance or tight installation requirements. The 3300 NSv system is optimized for centrifugal air compressors, refrigeration compressors, process gas compressors, and other small-bore machinery or high-speed equipment with limited target geometry, where standard 5 mm or 8 mm probes cannot be used.\u003c\/p\u003e\n\u003cp\u003eAs a key element of the 3300 XL NSv proximity transducer system, this probe operates in conjunction with a 330930 extension cable and a 330980 Proximitor sensor. Unlike standard 3300 XL systems, the NSv series is specifically engineered for tight spaces, small shaft diameters (under 51 mm or 2 in), and compact targets (under 15 mm or 0.6 in). The inclusion of Option 01 provides a standard cable with a miniature coaxial ClickLoc connector and an integrated connector protector, providing robust protection against liquid intrusion at connection points, while Option 05 ensures compatibility with major international hazardous area standards (including CSA, ATEX, and IECEx approvals).\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOption 22 unthreaded length: Provides 2.2 inches of unthreaded probe body length for flexible mounting depth adjustment.\u003c\/li\u003e\n  \u003cli\u003eOption 31 overall case length: Features a 3.1-inch overall 3\/8-24 UNF-2A threaded case length.\u003c\/li\u003e\n  \u003cli\u003eOption 10 total length: Integrated 1.0-meter (39-inch) length of 75-ohm FEP-insulated coaxial cable.\u003c\/li\u003e\n  \u003cli\u003eOption 01 connector and cable: Fitted with a Miniature Coaxial ClickLoc connector and an integrated fluorosilicone connector protector.\u003c\/li\u003e\n  \u003cli\u003eOption 05 agency approvals: Certified for hazardous areas with Multiple Approvals, including CSA, ATEX, and IECEx.\u003c\/li\u003e\n  \u003cli\u003eCompact unarmored design: Unarmored configuration is optimal for restricted clearance machine casings.\u003c\/li\u003e\n  \u003cli\u003eChemical resistance: Built with a high-performance polyphenylene sulfide (PPS) probe tip and AISI 304 stainless steel case for demanding process environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCentrifugal air compressors and refrigeration compressors.\u003c\/li\u003e\n  \u003cli\u003eRadial vibration and radial position measurements on high-speed shafts smaller than 51 mm (2 in).\u003c\/li\u003e\n  \u003cli\u003eAxial (thrust) position measurements on flat targets smaller than 15 mm (0.6 in).\u003c\/li\u003e\n  \u003cli\u003eTachometer, zero speed, and phase reference (Keyphasor) measurements.\u003c\/li\u003e\n  \u003cli\u003eSmall-bore machinery and aeroderivative gas turbines with tight envelope restrictions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption\u003c\/th\u003e\n      \u003cth\u003eCode on This SKU\u003c\/th\u003e\n      \u003cth\u003eDescription\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOrderable Part Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330908-22-31-10-01-05\u003c\/td\u003e\n      \u003ctd\u003e3300 NSv Proximity Probe, 3\/8-24 UNF thread, without armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eA - Unthreaded Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e22\u003c\/td\u003e\n      \u003ctd\u003e2.2 inches unthreaded length (order in increments of 0.1 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eB - Overall Case Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e31\u003c\/td\u003e\n      \u003ctd\u003e3.1 inches overall case length (order in increments of 0.1 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eC - Total Length Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e10\u003c\/td\u003e\n      \u003ctd\u003e1.0 meter (39 inches) total length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eD - Connector and Cable Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e01\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc connector with connector protector, standard cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eE - Agency Approval Option\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e05\u003c\/td\u003e\n      \u003ctd\u003eMultiple Approvals (including CSA, ATEX, and IECEx)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e330908-22-31-10-01-05\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProduct Series\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3300 XL NSv Proximity Transducer System\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Thread Size\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3\/8-24 UNF-2A, standard mount, without armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Tip Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe Case Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAISI 304 stainless steel (SST)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e2.2 inches (55.9 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCase Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3.1 inches (78.7 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTotal Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1.0 meter (39 inches)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e75-ohm coaxial, fluoroethylene propylene (FEP) insulated\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc connector, gold-plated brass\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnector Protector\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIncluded (Fluorosilicone material)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1.5 mm (60 mils), starting at approximately 0.25 mm (10 mils) from target\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eRecommended Gap Setting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1.0 mm (40 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIncremental Scale Factor (ISF)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e7.87 V\/mm (200 mV\/mil) +12.5% \/ -20% typical over linear range\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDeviation from Best Fit Straight Line (DSL)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eLess than +\/-0.06 mm (+\/-2.3 mils) typical\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTarget Calibration\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAISI 4140 steel (standard calibration)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e0 to 10 kHz: +0, -3 dB typical\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eProbe DC Resistance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eCenter conductor to outer conductor: 4.2 ohms +\/-0.5 ohms (for 1.0 m length)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +177 degC (-62 degF to +351 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eRelative Humidity\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e100% condensing, non-submersible when connectors are protected\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTensile Strength (Maximum Rated)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e220 N (50 lb) probe case to probe lead\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSystem Weight (Typical)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eApproximately 14 to 150 g (0.5 to 5.3 oz)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConnections and Interfaces\u003c\/h3\u003e\n\u003cp\u003eThis probe is equipped with an integrated miniature coaxial male ClickLoc connector on the cable end. It provides low-loss 75-ohm transmission of high-frequency radio signals between the probe tip and the extension cable. The gold-plated brass connector features an interface that locks securely in place to prevent loosening from vibration. The installed fluorosilicone connector protector seals the connection point against moisture, dirt, and process fluids.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEnsure the coaxial cable is routed with a minimum bend radius of 25.4 mm (1.0 in) to prevent transmission loss or physical damage.\u003c\/li\u003e\n  \u003cli\u003eApply the recommended mounting torque of 11.3 N m (100 in-lb) when installing the 3\/8-24 UNF-2A probe case. Never exceed the absolute maximum rated torque of 33.9 N m (300 in-lb).\u003c\/li\u003e\n  \u003cli\u003eTighten the coaxial ClickLoc connectors finger-tight, then torque to 0.56 N m (5 in-lb) of torque using proper installation tools if required.\u003c\/li\u003e\n  \u003cli\u003eLimit the thread engagement of the 3\/8-24 thread to 0.563 in (14.3 mm) to prevent binding or thread deformation.\u003c\/li\u003e\n  \u003cli\u003eSlide the provided fluorosilicone connector protector completely over the connection point to isolate the coaxial interface from exposure to machine fluids and humidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElectromagnetic Compatibility (EMC):\u003c\/strong\u003e Complies with European Community Directive 2014\/30\/EU standards EN 61000-6-2 (Industrial Immunity) and EN 61000-6-4 (Industrial Emissions).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHazardous Area Approvals (Option 05):\u003c\/strong\u003e Certified under CSA\/cNRTLus, ATEX, and IECEx for intrinsic safety and non-incendive installations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntrinsically Safe (ia):\u003c\/strong\u003e Class I, Zone 0: AEx\/Ex ia IIC T5...T1 Ga; Class I, Groups A, B, C, and D; Class II, Groups E, F, and G; Class III.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-incendive \/ Increased Safety (nA, ec):\u003c\/strong\u003e Class I, Zone 2: AEx\/Ex nA\/ec IIC T5...T1 Gc; Class I, Division 2, Groups A, B, C, and D.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoHS Compatibility:\u003c\/strong\u003e Fully compliant with European Directive 2011\/65\/EU and China RoHS regulations (15-year EFUP designation).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Safety:\u003c\/strong\u003e SIL 2 certified (HFT = 0) and SIL 3 certified (HFT = 1).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666623787371,"sku":"330908-22-31-10-01-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330908-22-31-10-01-05-3300-nsv-proximity-probes-v0fqhw20ovh_7483ca52-9b0b-4cb2-92d5-86cb1b5742ec.jpg?v=1765444301","url":"https:\/\/www.plcprotech.com\/tr\/products\/bently-nevada-330908-22-31-10-01-05-3300-nsv-proximity-probes","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}