Bently Nevada 3500/15-02-00-00 High Voltage AC Power Supply Module

Stokta sadece 6 adet kaldı

Üretici: Bently Nevada
Ürün No.: 3500/15-02-00-00
Menşei ülke:Amerika Birleşik Devletleri
Ürün Türü: Power Supply Module
Ödeme: T/T, Western Union
Ağırlık: 1390g
Boyutlar: 120.7 mm x 50.8 mm x 251.5 mm
Gönderim limanı: Xiamen
Garanti: 12 ay

Description

The 3500/15-02-00-00 is a high voltage AC power supply module designed for the 3500 Series Machinery Protection System. This half-height module installs into specialized slots on the left side of the 3500 rack to convert high voltage AC input into regulated voltages required by other system modules. Operating as a single supply or in a redundant dual-supply configuration, the 3500/15-02-00-00 ensures uninterrupted rack operation. In a dual setup, the lower slot houses the primary supply and the upper slot contains the backup supply; removing or inserting either module does not disrupt system operation. This specific configuration utilizes the high voltage AC power input module (PIM) and supports a nominal input voltage of 220 Vac rms.

Features

Half-height module design to maximize rack space efficiency.
Redundant power supply capability with automatic backup switching.
Hot-swappable replacement allowing module removal and insertion without disrupting rack operation.
Front panel "Supply OK" LED indicator for real-time operational status monitoring.
Integrated over-voltage protection that blows the input module fuse to protect internal components.
Under-voltage protection ensuring low voltage conditions will not damage the supply or PIM.

Applications

Turbo-machinery protection systems
Oil and gas refinery asset monitoring
Power generation turbine vibration and condition monitoring
Petrochemical plant machinery protection
Heavy industrial rotating equipment monitoring

Ordering Information

Option	Code	Description
A: Power Supply Type (Top Slot)	02	High Voltage ac (175 to 264 Vac rms)
B: Power Supply Type (Bottom Slot)	00	No supply (use when only one supply is required)
C: Agency Approval Option	00	None

Technical Specifications

Parameter	Specification
Manufacturer	Bently Nevada (General Electric Company)
Country of Origin	USA
Input Voltage Type	High Voltage AC
Nominal Input Voltage	220 Vac nominal
Input Voltage Range	175 to 264 Vac rms (247 to 373 Vac pk)
Input Voltage Range (Legacy)	175 to 250 Vac rms (for PIM prior to Rev. R / Supply prior to Rev. M)
Input Frequency	47 to 63 Hz
Full Rack Current Draw	2.3 A rms (maximum)
Power Supply Dimensions (H x W x D)	120.7 mm x 50.8 mm x 251.5 mm (4.75 in x 2.0 in x 9.9 in)
Power Supply Weight	1.39 kg (3.06 lb.)
Power Input Module Dimensions (H x W x D)	120.7 mm x 25.4 mm x 114.3 mm (4.75 in x 1.0 in x 4.5 in)
Power Input Module Weight	0.34 kg (0.75 lb.)
Operating Temperature	-30 degC to +65 degC (-22 degF to +150 degF)
Storage Temperature	-40 degC to +85 degC (-40 degF to +185 degF)
Humidity	95%, non-condensing
Minimum Loading	No minimum rack load is required

Connections/Interfaces

Terminal Pin / Component	Function
Front Panel LED	Supply OK LED indicates when the power supply operates properly.
LN1	AC Power Line Input 1 connection on the PIM.
LN2 / NEUT	AC Power Line Input 2 / Neutral connection on the PIM.
GND	Protective Earth Ground connection.
FUSE Terminal	Houses the 250V / 6.25A SB fuse for over-voltage protection.

Installation Guidelines

Rack Placement: Install the half-height power supply modules strictly into the specially designed slots located on the far left side of the 3500 rack.
Power Input Module: Mount the associated High Voltage AC Power Input Module (PIM) in the chassis position directly behind the main power supply module.
Redundancy Configuration: When deploying two power supplies for redundancy, place the primary supply in the lower slot and the backup supply in the upper slot.
Grounding: Securely connect the structural ground to the GND terminal on the rear Power Input Module to mitigate electromagnetic interference and ensure electrical safety.
Over-voltage Protection: Ensure the power source does not exceed 264 Vac rms, as over-voltage conditions will open the protective fuse on the PIM.
Hot-Swapping: When swapping modules, verify that at least one power supply remains active and operational to prevent system downtime.

Compliance and Certifications

EMC Standards: EN 61000-6-2 (Immunity for Industrial Environments), EN 55011/CISPR 11 (ISM Equipment), EN 61000-6-4 (Emissions for Industrial Environments)
European Community Directives: EMC Directive 2004/108/EC
Electrical Safety: EN 61010-1

Key Features:

#3500/15 #Power Supply Modules

Product Documentation

Technical Datasheet (PDF) Complete specifications and technical drawings.

What is the consequence of an over-voltage condition on the module?

An over-voltage condition will cause the protective fuse to open on the Power Input Module (PIM), preventing damage to the power supply or the rest of the rack.

Can I hot-swap the power supply while the machinery protection system is running?

Yes. Removing or inserting a power supply module will not disrupt rack operation as long as a second functioning power supply remains installed in the rack.

How do the slots determine primary and backup roles in a redundant configuration?

When two power supplies are installed, the module in the lower slot automatically acts as the primary supply, while the module in the upper slot serves as the backup supply.

What are the exact voltage limits for this high voltage AC supply option?

The module accepts a nominal input of 220 Vac, with an operational range of 175 to 264 Vac rms (247 to 373 Vac pk).

Küresel Ekspres Kargo

Standart Teslimat: DHL, FedEx ve UPS ile 4-6 iş günü.
Hızlı Gönderim: Saat 14:00 (GMT+8) öncesi verilen stoktaki siparişler aynı gün gönderilir.
Dünya Çapında Hizmet: Suudi Arabistan ve BAE'ye hızlı teslimat dahil 150'den fazla ülkeye hizmet veriyoruz.

İadeler ve Garanti

30 Günlük Garanti: Stokta bulunan ürünler, orijinal, fabrika mühürlü ambalajında iade kabul edilir.
12 Aylık Garanti: Her endüstriyel bileşen profesyonel teknik garantimizle desteklenmektedir.

Siparişler Pazartesi-Cuma (resmi tatiller hariç) işlenir ve teslim edilir.

Tam uygunluk, stok yenileme ücretleri ve uluslararası iade detayları için lütfen resmi sayfamızı inceleyin İade ve Geri Ödeme Politikası .

TECHNICAL SPECIFICATIONS

Country of origin

Bently Nevada 3500/15-02-00-00 High Voltage AC Power Supply Module