{"product_id":"bently-nevada-330103-00-06-10-02-00-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330103-00-06-10-02-00 3300 XL 8 mm Proximity Probe","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e330103-00-06-10-02-00\u003c\/strong\u003e is an unarmored metric \u003cstrong\u003eproximity probe\u003c\/strong\u003e featuring a 0 mm unthreaded length, a 60 mm overall case length, a 1.0-meter total cable length, and a standard coaxial cable with a miniature ClickLoc connector.\u003c\/p\u003e\n\u003cp\u003eWhile armored models such as the 330104 series provide flexible stainless steel protective armor, this standard unarmored 330103 probe variant is intended for protected conduits or internal machinery routings where extra mechanical armor is unnecessary. The 1.0 m total length option (Option 10) connects directly to a matching 3300 XL extension cable and Proximitor sensor, completing a 5-meter or 9-meter measurement system. The miniature coaxial ClickLoc connector (Option 02) does not include a connector protector, meaning it can be routed through smaller clearances or used with field-installed protection sleeves.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOption 00 designates a 0 mm unthreaded length for full thread engagement across the probe casing.\u003c\/li\u003e\n  \u003cli\u003eOption 06 defines a 60 mm case length with metric M10 x 1 threads for direct mounting into tapped holes.\u003c\/li\u003e\n  \u003cli\u003eOption 10 supplies a 1.0-meter (3.3 feet) overall cable length.\u003c\/li\u003e\n  \u003cli\u003eOption 02 provides a miniature coaxial ClickLoc connector without a pre-installed connector protector.\u003c\/li\u003e\n  \u003cli\u003eOption 00 specifies that no hazardous area agency approvals are required for this configuration.\u003c\/li\u003e\n  \u003cli\u003e8.0 mm tip diameter with polyphenylene sulfide (PPS) tip material molded to the stainless steel body.\u003c\/li\u003e\n  \u003cli\u003eViton O-ring seal to prevent fluid leakage between the probe tip and the metallic case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShaft radial vibration monitoring on machinery such as steam turbines, gas turbines, and compressors.\u003c\/li\u003e\n  \u003cli\u003eShaft axial position and thrust displacement measurements.\u003c\/li\u003e\n  \u003cli\u003eRotor dynamic analysis and eccentricity measurements.\u003c\/li\u003e\n  \u003cli\u003ePhase reference (Keyphasor) signal generation for speed measurement and balancing.\u003c\/li\u003e\n  \u003cli\u003eShaft position monitoring in industrial gearboxes, pumps, and fans.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOption Segment\u003c\/th\u003e\n      \u003cth\u003eCode Value\u003c\/th\u003e\n      \u003cth\u003eDescription\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrderable Part Number\u003c\/td\u003e\n      \u003ctd\u003e330103-00-06-10-02-00\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm probe, M10 x 1 thread, without armor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eA - Unthreaded Length Option\u003c\/td\u003e\n      \u003ctd\u003e00\u003c\/td\u003e\n      \u003ctd\u003e0 mm unthreaded length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eB - Overall Case Length Option\u003c\/td\u003e\n      \u003ctd\u003e06\u003c\/td\u003e\n      \u003ctd\u003e60 mm case length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eC - Total Length Option\u003c\/td\u003e\n      \u003ctd\u003e10\u003c\/td\u003e\n      \u003ctd\u003e1.0 meter (3.3 feet) total length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD - Connector and Cable Option\u003c\/td\u003e\n      \u003ctd\u003e02\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eE - Agency Approval Option\u003c\/td\u003e\n      \u003ctd\u003e00\u003c\/td\u003e\n      \u003ctd\u003eNot required\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eParameter\u003c\/th\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eBently Nevada\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePart Number\u003c\/td\u003e\n      \u003ctd\u003e330103-00-06-10-02-00\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Series\u003c\/td\u003e\n      \u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Tip Diameter\u003c\/td\u003e\n      \u003ctd\u003e8.0 mm (0.31 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread Size\u003c\/td\u003e\n      \u003ctd\u003eM10 x 1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUnthreaded Length (Option 00)\u003c\/td\u003e\n      \u003ctd\u003e0 mm (0.0 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCase Length (Option 06)\u003c\/td\u003e\n      \u003ctd\u003e60 mm (2.4 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTotal Length (Option 10)\u003c\/td\u003e\n      \u003ctd\u003e1.0 meter (3.3 feet)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConnector Type (Option 02)\u003c\/td\u003e\n      \u003ctd\u003eMiniature coaxial ClickLoc\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eArmor Option\u003c\/td\u003e\n      \u003ctd\u003eNone (unarmored)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAgency Approval (Option 00)\u003c\/td\u003e\n      \u003ctd\u003eNot required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTip Material\u003c\/td\u003e\n      \u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCase Material\u003c\/td\u003e\n      \u003ctd\u003e303 or 304 Stainless Steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLinear Range\u003c\/td\u003e\n      \u003ctd\u003e2.0 mm (80 mils), from 0.25 mm to 2.3 mm (10 to 90 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncremental Scale Factor\u003c\/td\u003e\n      \u003ctd\u003e7.87 V\/mm (200 mV\/mil) nominal\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe Resistance (nominal)\u003c\/td\u003e\n      \u003ctd\u003e7.59 Ohms +\/- 0.50 Ohms (center to outer conductor)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n      \u003ctd\u003e-52 degC to +177 degC (-62 degF to +350 degF)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum Thread Engagement\u003c\/td\u003e\n      \u003ctd\u003e15 mm (0.59 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMinimum Cable Bend Radius\u003c\/td\u003e\n      \u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.32 kg (323 g)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions (coiled)\u003c\/td\u003e\n      \u003ctd\u003e50 mm x 150 mm x 150 mm (H x W x D)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor standard M10 x 1 threads, limit thread engagement to a maximum of 15 mm to avoid binding.\u003c\/li\u003e\n  \u003cli\u003eUse an 8 mm wrench on the integrated wrench flats when installing the probe.\u003c\/li\u003e\n  \u003cli\u003eMaintain a minimum cable bend radius of 25.4 mm (1.0 inch) when routing the standard FEP coaxial cable.\u003c\/li\u003e\n  \u003cli\u003eUse standard calibration targets made of AISI 4140 steel to maintain system accuracy.\u003c\/li\u003e\n  \u003cli\u003eProtect the ClickLoc connection from oil and moisture ingress using a connector protector or appropriate sealing if exposed to turbine oil environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompliance and Certifications\u003c\/h3\u003e\n\u003cp\u003eThis configuration uses Option 00, indicating it is intended for general industrial installations that do not require specialized hazardous area approvals. It is manufactured under rigorous ISO 9001 quality standards and conforms to standard mechanical and electrical safety profiles for industrial transducer equipment.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52666854080875,"sku":"330103-00-06-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3227\/0443\/files\/bently-nevada-330103-00-06-10-02-00-3300-xl-proximitor-sensor-54snzbcf300_c4403723-5202-4d12-b464-079814e48037.jpg?v=1765449130","url":"https:\/\/www.plcprotech.com\/vi\/products\/bently-nevada-330103-00-06-10-02-00-3300-xl-8-mm-proximity-probe","provider":"PLC ProTech Ltd.","version":"1.0","type":"link"}