Bently Nevada 330102-04-16-10-02-00 3300 XL 8 mm Proximity Probe

Description

330102-04-16-10-02-00: 3300 XL 8 mm proximity probe with armored cable, 3/8-24 UNF thread, 0.4 in unthreaded length (Option 04), 1.6 in case length (Option 16), and 1.0 m total system length (Option 10). This configuration utilizes a miniature coaxial ClickLoc connector without a connector protector (Option 02) and requires no hazardous area agency approvals (Option 00).

The 330102 series is an armored variant of the standard 3300 XL 8 mm probe, designed to provide increased mechanical protection in environments where abrasion or accidental contact with the lead is a concern. As a core component of the 3300 XL 8 mm Proximity Transducer System, this probe is engineered for non-contact eddy-current displacement measurement, serving critical machinery protection applications such as shaft vibration and axial position monitoring in turbines, compressors, and large rotating equipment.

Features

• Armored construction for enhanced mechanical durability in industrial environments
• 3/8-24 UNF threaded body for reliable mounting and adjustment
• 1.0 m total system length compatible with standard 3300 XL Proximitor sensors
• Miniature coaxial ClickLoc connector provides secure, reliable signal connection
• 0.4 in unthreaded length and 1.6 in case length configuration
• Standard temperature range operation

Applications

• Radial vibration and shaft position measurement on steam and gas turbines
• Compressor and pump rotor position monitoring
• High-vibration zones requiring armored cable protection
• Critical machinery protection systems requiring API 670 compliance

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is installed using the appropriate threaded mounting bracket. Maintain correct gap distance as specified by the Proximitor sensor calibration data. Use silicone self-fusing tape to protect the ClickLoc connector from moisture and contamination if not using a connector protector. Proper cable routing is required to prevent strain on the armored lead.