Bently Nevada 330130-030-02-05 3300 XL Standard Extension Cable

Description

The 330130-030-02-05 is a 3300 XL Standard Extension Cable designed for use in 3300 XL 8 mm proximity transducer systems. This 3.0 meter (9.8 foot) extension cable (Option 030) provides the necessary connectivity between the proximity probe and the Proximitor sensor, ensuring precise, non-contact eddy-current displacement measurement for critical rotating machinery such as turbines, compressors, and pumps.

This configuration features Option 02 (standard cable) and Option 05 (CSA, ATEX, IECEx approvals), making it suitable for hazardous area installations where rigorous safety certifications are required. It is essential to ensure that the sum of the extension cable length and the probe lead length matches the system calibration length (typically 5 meters or 9 meters) defined by the Proximitor sensor.

Features

• 3.0 meter (9.8 feet) total length (Option 030)
• Standard cable configuration (Option 02)
• CSA, ATEX, and IECEx agency approvals (Option 05)
• Compatible with 3300 XL 8 mm probes and 3300 XL Proximitor sensors
• Miniature coaxial ClickLoc connectors for secure, reliable signal transmission

Applications

• Shaft vibration and axial position monitoring on rotating machinery
• Critical machinery protection in oil and gas, power generation, and petrochemical industries
• Hazardous area environments requiring CSA, ATEX, or IECEx certification
• Integration into existing 3300 XL monitoring systems

Ordering Information

Technical Specifications

Installation Guidelines

Ensure that the extension cable is routed away from high-voltage cables and potential sources of electromagnetic interference. Connectors should be clean and tightened by hand until the ClickLoc mechanism engages fully. Use connector protectors (sold separately) in high-humidity or contaminated environments to provide additional environmental protection and electrical isolation.

Compliance and Certifications

The 330130-030-02-05 meets CSA, ATEX, and IECEx hazardous area requirements. Always verify site-specific safety documentation and ensure proper grounding of the transducer system during installation.