Bently Nevada 84661-10 3300 XL Interconnection Cable

Description

The 84661-10 is a 10-foot (3.0 m) standard armored interconnection cable designed for use with the Bently Nevada High Temperature Velomitor System (HTVS). This cable configuration features a rugged stainless steel armor outer jacket protecting a shielded 0.382 mm2 (22 AWG) conductor, providing mechanical protection against abrasion and harsh industrial environments while maintaining signal integrity.

This interconnect cable is engineered to link the transducer assembly to the monitoring instrumentation. It is equipped with a moisture-resistant female connector at the HTVS transducer end and standard ring lugs at the monitor termination end. The 84661-10 provides a temperature operating range of -29 degC to 121 degC (-20 degF to 250 degF), ensuring compatibility with demanding machine monitoring installations where signal path shielding and mechanical resilience are required.

Features

• Armor Protection: Stainless steel armor over shielded 22 AWG cable for high mechanical durability.
• Cable Length: 10 feet (3.0 m) total length (Option 10).
• Termination: Moisture-resistant female connector at the sensor end; ring lugs for monitor-side connection.
• Conductor: 0.382 mm2 (22 AWG) shielded twisted pair to minimize electrical noise interference.
• Operating Temperature: -29 degC to 121 degC (-20 degF to 250 degF).

Applications

Used for vibration monitoring in high-temperature applications requiring the High Temperature Velomitor System (HTVS). Ideal for rotating machinery in power generation, petrochemical, and heavy industrial facilities where casing-mounted vibration measurements are critical and cables are exposed to potential mechanical impact or abrasion.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure that the stainless steel armor is properly supported using cable clamps to prevent mechanical strain on the connectors. When routing in hazardous areas, ensure installation complies with the relevant site safety requirements and Bently Nevada documentation. The moisture-resistant boot at the transducer end must be correctly seated to maintain IP protection ratings.