Bently Nevada 330104-00-24-50-02-00 3300 XL 8 mm Proximity Probe

Description

Fully threaded metric M10 x 1 probe body (Option 00) and a 240 mm overall case length (Option 24) specify this 330104-00-24-50-02-00 3300 XL 8 mm proximity probe configuration. This specific metric configuration is engineered with an integral stainless steel armor sleeve (base model 330104) and has a 5.0 m total cable length (Option 50) terminating in a miniature coaxial ClickLoc connector (Option 02) without a connector protector. No agency approvals are required for this assembly (Option 00).

Operating as a non-contact, eddy-current transducer, the 5.0 m cable configuration matches with a corresponding 5.0 m 3300 XL Proximitor sensor, eliminating the need for an intermediate extension cable. While unarmored sibling variants (such as the 330103) are suitable for clean conduit pathways, the 330104 features a flexible stainless steel armor that shields the coaxial lead from mechanical damage, abrasion, and aggressive fluid exposure in demanding industrial environments.

Features

• Option 00 unthreaded length specifies a fully threaded case for maximum engagement.
• Option 24 case length of 240 mm accommodates mounting in deep threaded ports.
• Option 50 total length provides 5.0 meters of integrated, armored coaxial cable.
• Option 02 coaxial connector features the gold-plated miniature ClickLoc design.
• Base model 330104 integrates flexible stainless steel armor with an FEP outer jacket over the cable.
• M10 x 1 metric threads provide mounting compatibility with metric threaded brackets and housings.

Applications

• Shaft vibration and axial position measurement on rotating machinery.
• Machinery protection systems for steam turbines, gas turbines, compressors, pumps, and gearboxes.
• Harsh environment installations requiring armored cable protection against mechanical wear.
• Deep-well mounting applications requiring a 240 mm threaded case length.

Ordering Information

Technical Specifications

Connections and Interfaces

Installation Guidelines

• Ensure a minimum bend radius of 25.4 mm (1.0 in) for the armored cable to prevent internal conductor damage.
• Torque the probe case to a maximum recommended limit of 22.6 Nm (200 in-lbf) during installation into the mounting port.
• Keep the miniature coaxial ClickLoc connectors clean and dry; do not expose to moisture or turbine oil without adequate sealing.
• Maintain a nominal gap of 1.27 mm (50 mils) from the target surface for a typical -10 Vdc bias output.
• Verify that this 5.0 m probe is paired exclusively with a 5.0 m Proximitor sensor; do not use with 9.0 m Proximitor systems.

Compliance and Certifications

• EMC Directive 2014/30/EU, EN 61000-6-2, EN 61000-6-4
• RoHS Directive 2011/65/EU
• Functional Safety: SIL 2 capable