Honeywell 51304511-100 TDC 3000 Network Interface Module MODEM Card

Only 3 item(s) left in stock

Manufacturer: Honeywell
Product No.: 51304511-100
Country of origin:Съединени щати
Product Type: Network Interface Modules
Payment: T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Description

Designed for seamless communication integration within legacy distributed control environments, the Honeywell 51304511-100 serves as a high-reliability Network Interface Module MODEM Card. This critical hardware component facilitates stable, deterministic data transmission across control network interfaces, ensuring real-time process monitoring and system synchronization. Engineered to interface directly with the system backplane, this card manages physical layer modulation and demodulation of communication signals, preventing data loss in high-electromagnetic interference (EMI) industrial environments.

Features

Provides robust signal modulation and demodulation for dedicated industrial control networks.
Direct backplane integration allows for low-latency data transfer and high-speed processing.
Industrial-grade component selection optimized for continuous, 24/7 operation in control room environments.
Ensures backwards compatibility with legacy Honeywell TDC 3000 and related distributed control system (DCS) architectures.
Designed to mitigate noise and signal degradation over extended coaxial or twinaxial network runs.

Applications

Refining and petrochemical plant distributed control systems (DCS).
Power generation facility communication networks.
Pulp and paper mill automation systems.
Municipal water and wastewater treatment facilities.

Technical Specifications

Manufacturer	Honeywell
Part Number/Model	51304511-100
Module Type	Network Interface Module MODEM Card
System Compatibility	Honeywell TDC 3000 / TPS Systems
Net Weight	0.45 kg
Shipping Weight	1.5 kg
Mounting Type	Chassis/Rack card slot mount

Installation Guidelines

Always power down the controller chassis or rack environment before inserting or removing the MODEM card to prevent electrostatic discharge (ESD) damage or electrical faults.
Ensure proper vertical alignment with the backplane guide rails during insertion to avoid pin damage.
Secure any card-retention screws to maintain a consistent chassis ground interface and prevent vibration displacement.
Verify that all communication cable shielding is grounded in accordance with standard plant engineering practices to reduce electromagnetic interference.

Key Features:

#Honeywell TDC 3000 #Network Interface Modules

What is the primary function of the Honeywell 51304511-100?

The Honeywell 51304511-100 is a Network Interface Module (NIM) MODEM Card designed to facilitate reliable, deterministic data modulation and demodulation within legacy Honeywell DCS architectures such as the TDC 3000.

What is the physical weight of this module?

The net weight of the card is 0.45 kg, and the total shipping weight is approximately 1.5 kg.

Does this card support hot-swapping?

It is highly recommended to power down the destination chassis or rack before installing or removing this module to prevent potential electrical damage and ensure safe handling.

Глобална експресна доставка

Стандартна доставка: 4-6 работни дни чрез DHL, FedEx и UPS.
Експресна изпращане: Изпращане в същия ден за налични поръчки, направени преди 14:00 ч. (GMT+8).
Глобално покритие: Обслужваме над 150 държави, включително бърза доставка до Саудитска Арабия и ОАЕ.

Връщания и гаранция

30-дневна гаранция: Връщания се приемат за налични продукти в оригинална, фабрично запечатана опаковка.
12-месечна гаранция: Всеки индустриален компонент е подкрепен с нашата професионална техническа гаранция.

Поръчките се обработват и доставят от понеделник до петък (с изключение на официалните празници).

За пълна информация относно допустимост, такси за презареждане и международни връщания, моля, разгледайте нашия официален Политика за възстановяване и връщане .

TECHNICAL SPECIFICATIONS

Country of origin

Наскоро разгледани продукти

Технически знания

Electric Actuators Designed to Replace Fluids: Hands-on Tutorial

Електрически задвижващи механизми, проектирани да заменят хидравлични и пневматични системи: Практическо ръководство за индустриална автоматизация

Тази статия обяснява как интегрираните електрически задвижвания, като серията e-Actuator на SMC, трансформират индустриалното управление на движението, като заменят традиционните пневматични и...

23 юни 2026 г.

$Math Operations Using OpenPLC for Industrial Automation Applications$

Honeywell 51304511-100 TDC 3000 Network Interface Module MODEM Card