Siemens 6AV7802-0BA00-1AA0 SIMATIC Panel PC 677

Description

The Siemens 6AV7802-0BA00-1AA0 is a SIMATIC Panel PC 677 designed for industrial human-machine interface (HMI) and control applications. This unit features a 15-inch touchscreen display with a resolution of 1024x768 pixels and a convenient front-side USB interface. It is powered by an Intel Celeron M 370 processor operating at 1.5 GHz and is configured with 256MB of DDR266 SDRAM and an 80 GB SATA hard drive. This model is supplied without a pre-installed operating system, providing flexibility for custom software deployment. The integrated power supply supports a wide input range of 110-230V AC.

Features

• 15-inch color TFT touchscreen display
• 1024 x 768 pixel resolution (XGA)
• Integrated Intel Celeron M 370 processor (1.5 GHz)
• 256 MB DDR266 SDRAM installed
• 80 GB 3.5-inch SATA hard disk drive for storage
• Built-in DVD-ROM optical drive
• Front-panel accessible USB interface
• Wide-range AC power supply (110-230V AC)
• Ships without an operating system

Applications

• Process visualization and control
• Machine data acquisition and logging
• Factory automation HMI stations
• Supervisory Control and Data Acquisition (SCADA) nodes
• Industrial IT and plant floor computing

Technical Specifications

Installation Guidelines

1. 1
   Prepare Mounting Location: Ensure the control cabinet panel is prepared with the correct cutout dimensions for the Panel PC. Verify that the mounting surface is clean, flat, and free of debris.
2. 2
   Mount the Unit: Insert the Panel PC into the cutout from the front of the cabinet. Secure it from the rear using the provided mounting clamps. Tighten the clamp screws sequentially and evenly to ensure a uniform seal against the panel gasket.
3. 3
   Connect Protective Earth (PE): Connect a dedicated protective earth conductor to the designated PE terminal on the chassis. This connection is critical for electrical safety and must be established before any other electrical connections are made.
4. 4
   Connect Power Supply: Connect the 110-230V AC power cable to the unit's power input connector. Ensure the power source is stable and within the specified voltage and frequency range. Route power cables separately from signal and communication cables to minimize interference.
5. 5
   Connect Peripherals: Connect necessary peripherals such as Ethernet cables, USB devices, and any other required I/O. After all connections are secure, close the control cabinet door.
6. 6
   Power-Up and Commissioning: Re-engage the main power supply to the cabinet. Power on the Panel PC and proceed with the installation of the required operating system and application software.