Siemens 6ES7132-4HB12-0AA0 SIMATIC ET 200SP Relay Output Module

Only 7 item(s) left in stock

Manufacturer: Siemens
Product No.: 6ES7132-4HB12-0AA0
Country of origin:Германия
Product Type: Digital Output Module
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 950g
Dimensions: 2.5 cm x 5.1 cm x 83.8 cm
Shipping port: Xiamen
Warranty: 12 months

Description

The Siemens 6ES7132-4HB12-0AA0 is a digital electronic output module designed for the SIMATIC ET 200SP distributed I/O system. This two-channel relay output module facilitates the interface between a Programmable Logic Controller (PLC) and higher-power real-world industrial devices by switching digital signals. Each of its two relay outputs is capable of switching loads up to 5A, making it suitable for direct control of various equipment such as solenoid valves, DC contactors, and indicator lights commonly found in industrial automation. The module offers significant voltage flexibility, supporting both DC circuits from 24V to 48V and AC voltages from 24V up to 230V, all at the 5A current rating. For enhanced wiring and control logic adaptability, each channel provides both Normally Open (NO) and Normally Closed (NC) contacts. The 6ES7132-4HB12-0AA0 is engineered with isolation from the system's supply voltage, which improves safety and protects the central controller from potential electrical transients originating from the load side. While similar to the 6ES7132-4HB12-0AB0 model, the "0AA0" suffix may denote a specific regional variant or an older version. This product line has reached its End-of-Lifecycle (EOL) status, with Siemens recommending migration to newer module versions for future designs and long-term spare part availability.

Features

Two-channel relay output module
Maximum switching capacity of 5A per channel
Supports DC voltage range of 24V to 48V
Supports AC voltage range of 24V to 230V
Each channel includes Normally Open (NO) and Normally Closed (NC) contacts
Engineered with isolation from the system supply voltage
Designed for integration into the SIMATIC ET 200SP system

Applications

Industrial automation systems requiring digital output control
Switching solenoid valves in pneumatic or hydraulic systems
Controlling DC contactors for motor starters or power circuits
Actuating indicator lights and signaling devices
General-purpose digital output for PLC-based control systems

Technical Specifications

Parameter	Value
Model Number	6ES7132-4HB12-0AA0
Module Type	Digital Output Module (2-channel Relay)
Manufacturer	Siemens
Product Series	SIMATIC ET 200SP
System Compatibility	PLC
Output Channels	2
Output Type	Relay
Switching Capacity (per channel)	5A
DC Voltage Range	24V to 48V
AC Voltage Range	24V to 230V
Contact Type	Normally Open (NO), Normally Closed (NC)
Isolation	From system supply voltage
Communication Service	Ethernet router
Product Lifecycle Status	End-of-Lifecycle (EOL)
Shipping Weight	0.95 kg
Package Dimensions (Calculated)	2.5 cm x 5.1 cm x 83.8 cm
Country of Origin	GERMANY
HS CODE	8537101190

Installation Guidelines

De-energize System: Before installation, ensure all power to the SIMATIC ET 200SP system and connected loads is completely de-energized to prevent electrical shock or equipment damage.
Mounting: Securely mount the module into its designated slot within the ET 200SP rack or terminal base unit, ensuring proper mechanical and electrical connection.
Wiring: Connect load devices to the module's output terminals. Utilize the Normally Open (NO) or Normally Closed (NC) contacts as required by the application's control logic.
Voltage and Current Ratings: Verify that the connected loads' voltage and current requirements do not exceed the module's specified limits (24-48V DC, 24-230V AC, 5A per channel).
Grounding and Shielding: Implement proper grounding and shielding practices for all cabling to minimize electrical noise and ensure reliable operation, especially for sensitive loads.
Cable Routing: Route power and signal cables separately to avoid interference. Ensure cables are secured and protected from physical damage.
Re-energize and Test: After installation and wiring are complete, carefully re-energize the system and perform functional tests to confirm correct operation of the output channels.

Key Features:

#Relay Output Module #SIMATIC ET 200SP

What is the primary function of the Siemens 6ES7132-4HB12-0AA0 module?

It is a two-channel digital relay output module for the SIMATIC ET 200SP system, designed to switch higher-power industrial loads from a PLC.

What types of loads can this module switch?

It can switch various industrial equipment such as solenoid valves, DC contactors, and indicator lights, handling up to 5A per channel.

What voltage ranges are supported by the relay outputs?

The module supports DC voltages from 24V to 48V and AC voltages from 24V to 230V, both at a maximum of 5A.

Does the module offer flexible wiring options?

Yes, each of its two channels provides both Normally Open (NO) and Normally Closed (NC) contacts for diverse wiring and control logic requirements.

What is the product lifecycle status of this module?

The Siemens 6ES7132-4HB12-0AA0 is currently in an End-of-Lifecycle (EOL) status, with Siemens recommending migration to newer versions for new projects.

Глобална експресна доставка

Стандартна доставка: 4-6 работни дни чрез DHL, FedEx и UPS.
Експресна изпращане: Изпращане в същия ден за налични поръчки, направени преди 14:00 ч. (GMT+8).
Глобално покритие: Обслужваме над 150 държави, включително бърза доставка до Саудитска Арабия и ОАЕ.

Връщания и гаранция

30-дневна гаранция: Връщания се приемат за налични продукти в оригинална, фабрично запечатана опаковка.
12-месечна гаранция: Всеки индустриален компонент е подкрепен с нашата професионална техническа гаранция.

Поръчките се обработват и доставят от понеделник до петък (с изключение на официалните празници).

За пълна информация относно допустимост, такси за презареждане и международни връщания, моля, разгледайте нашия официален Политика за възстановяване и връщане .

TECHNICAL SPECIFICATIONS

Country of origin

Наскоро разгледани продукти

Технически знания

Electric Actuators Designed to Replace Fluids: Hands-on Tutorial

Електрически задвижващи механизми, проектирани да заменят хидравлични и пневматични системи: Практическо ръководство за индустриална автоматизация

Тази статия обяснява как интегрираните електрически задвижвания, като серията e-Actuator на SMC, трансформират индустриалното управление на движението, като заменят традиционните пневматични и...

23 юни 2026 г.

$Math Operations Using OpenPLC for Industrial Automation Applications$

Siemens 6ES7132-4HB12-0AA0 SIMATIC ET 200SP Relay Output Module