Siemens 6ES7647-6AC35-0FK0 SIMATIC BOX PC 627 Industrial PC

Description

The Siemens 6ES7647-6AC35-0FK0 is a SIMATIC BOX PC 627 designed for industrial applications. This unit is configured with a Pentium M 730 1.6 GHz processor, 256 MB of DDR2 RAM, and an 80 GB SATA hard disk drive. It features integrated AGP graphics, dual 10/100 Mbit/s Ethernet ports, and an onboard RAID controller for data integrity. The system is equipped with a 110/230V AC industrial power supply and includes a PCI interface card that provides additional COM2 and LPT1 ports. This model is supplied without a pre-installed operating system, providing flexibility for custom software deployment.

Features

• Integrated AGP graphics with 8-128 MB shared memory
• Dual 10/100 Mbit/s Ethernet RJ45 ports for network connectivity
• Four high-current USB 2.0 ports
• Onboard RAID controller for enhanced storage reliability
• Internal slot for a CompactFlash drive
• Integrated watchdog timer and temperature/fan monitoring
• Two available PCI slots for hardware expansion
• Includes a PCI interface card for COM2 and LPT1 ports

Applications

• Human-Machine Interface (HMI) server
• Data acquisition and logging systems
• Industrial control and visualization nodes
• Gateway for factory floor networks
• Legacy system support and maintenance

Technical Specifications

Installation Guidelines

1. 1
   Mounting: Securely mount the Box PC inside a suitable industrial enclosure that provides protection against environmental factors. Ensure adequate clearance around the unit for ventilation and cable access.
2. 2
   Grounding: Connect the chassis ground terminal to the control panel's main protective earth (PE) bus bar using a low-impedance conductor. A proper ground connection is essential for safety and noise immunity.
3. 3
   Power Connection: Connect the AC 110/230V power supply to a stable, filtered power source. Use the provided European power cable or a suitable equivalent for your region. Ensure the power source voltage matches the supply rating.
4. 4
   I/O Wiring: Connect all required peripherals, including Ethernet, USB, and serial devices. Route signal cables separately from high-voltage power lines to minimize electromagnetic interference.
5. 5
   System Startup: After verifying all connections, restore power to the panel. Proceed with operating system and application software installation as required for the specific industrial task.