Siemens 6ES7647-7BA20-2XM0 SIMATIC IPC427C Microbox PC

Description

The Siemens 6ES7647-7BA20-2XM0 is a compact and fanless SIMATIC IPC427C Microbox PC designed for control, data acquisition, and communication tasks in industrial environments. This unit is equipped with an Intel Celeron M 1.2 GHz processor, 1 GB of DDR3 RAM, and a 2 GB replaceable CompactFlash card for storage. It comes pre-installed with the Windows Embedded Standard 2009 operating system, providing a ready-to-deploy platform for various automation applications. Its robust, maintenance-free design makes it suitable for continuous operation in demanding settings.

Features

• Processor: Intel Celeron M at 1.2 GHz with 800 MHz FSB
• Memory: 1 GByte DDR3 1066 SODIMM
• Storage: 2 GB replaceable CompactFlash (CF) card
• Operating System: Windows Embedded Standard 2009 (pre-installed)
• Design: Compact, fanless Microbox PC form factor
• Product Status: Phase-Out, suitable for spare parts and legacy system maintenance

Applications

• Machine-level data processing and visualization
• Gateway for industrial communication protocols
• Supervisory control and data acquisition (SCADA) nodes
• Embedded control systems
• Replacement for legacy panel PCs in existing installations

Technical Specifications

Installation Guidelines

1. 1
   Mounting: Secure the Microbox PC to a stable, vibration-free surface or DIN rail within a control cabinet. Ensure adequate clearance around the unit for heat dissipation, as it is passively cooled.
2. 2
   Grounding: Connect the chassis grounding terminal to the main protective earth (PE) busbar of the cabinet using a low-impedance conductor. A proper ground connection is essential for noise immunity and safety.
3. 3
   Power Connection: Connect a stable, regulated DC power supply to the designated power input terminals. Verify the supply voltage matches the requirements specified on the device label before energizing.
4. 4
   I/O and Network Cabling: Route all communication and I/O cables separately from high-voltage power lines to prevent electromagnetic interference. Use shielded cables for all network and serial connections, ensuring shields are properly terminated.
5. 5
   Initial Power-Up: After verifying all connections, apply power to the unit. The pre-installed operating system should boot automatically. Connect peripherals such as a monitor and keyboard for initial configuration as needed.