ABB 1SVR427026R0000 CP-C 24/20.0 Power Supply Module

Description

This primary switch-mode power supply is designed to provide regulated DC power for heavy-duty industrial control and automation architecture. The ABB CP-C.1 24/20.0 (Product ID: 1SVR360763R1001) delivers a stable 24 V DC output at 20 A from a versatile single-phase input grid. Engineered with a built-in power reserve of up to 30%, this power supply module effectively accommodates high transient starter currents and fluctuating dynamic loads without disrupting overall system operation. This device integrates smoothly with standard PLC and DCS automation networks requiring continuous duty cycles and precise voltage stability.

Features

• High-efficiency primary switch-mode design 
• Wide input voltage range accepting 85-264 V AC and 90-300 V DC 
• Continuous rated output power of 480 W 
• U/I output characteristic curve featuring a power reserve up to 30% 
• Adjustable output voltage range from 22.5 to 28.5 V DC 
• Active power factor correction complying with EN 61000-3-2 
• Support for parallel operation to safely extend total capacity or establish a redundant system layout 

Applications

• Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC) power cabinets 
• Factory machine automation and critical control loops
• Power infrastructure for manufacturing plant automation instrumentation

Technical Specifications

Connections/Interfaces

Installation Guidelines

DIN Rail Mounting

Install onto standard 35 mm mounting rails (TH35-15 or TH35-7.5) in accordance with IEC 60715. Snap the module firmly into place using mounting positions 1 through 7 to guarantee stability under mechanical vibration.

Minimum Mounting Clearances

To maintain adequate vertical air circulation and minimize physical thermal load transfers, leave a minimum clearance of 25 mm horizontally and vertically from any adjacent electrically conductive board or equivalent equipment of the same unit type.

Wire Termination Requirements

Ensure input connections conform to a tightening torque of 0.5 N-m (4.4 in-lb). Output connections must be tightened securely to 1.2 N-m (10.5 in-lb) to minimize contact resistance and overheating at higher current thresholds.

Compliance and Certifications

• CAN/CSA C22.2 No.107.1 
• IEC/EN 63000, IEC/EN 61000-6-2, IEC/EN 61000-6-3, IEC/EN 61204, IEC/EN 61010-1 
• UL 508, UL 61010-1, UL 61010-2-201 
• ABS (ABS_17-HG1591548-2-PDA) 
• CB Scheme (CB_DK_103862_A2_UL) 
• cULus (cULus508_20161102-E174460) 
• cURus (CURus60950 E196145-A11-UL / CURUSANSI12-12_20161122_E317914-) 
• CE (1SVD982010-00) 
• UKCA (1SVD982010-10) 
• DNV GL (DNV_GL_TAA00000YB_1) 
• SEMI F47 (SEMI_F47 4787681819-2)