Bently Nevada 106765-10 Interconnect Cable

Description

The 106765-10 is a high-quality interconnect cable assembly designed specifically for use with the Bently Nevada Velomitor XA (eXtended Application) piezoelectric velocity sensor. This configuration features a total length of 10 metres (approx 32.8 feet) and is constructed to provide reliable signal transmission in demanding industrial environments.

This cable assembly includes 316L stainless steel armor for physical protection and clear shrink tubing to ensure durability against abrasion and environmental stressors. The cable utilizes 22 AWG (0.382 mm squared) conductors with shielding, terminating in a configuration compatible with standard Velomitor XA monitoring chains. Proper installation with this cable ensures the system meets IP-65 and NEMA 4X requirements when paired with the Velomitor XA sensor.

Features

• 10 metres total length (Option 10)
• 22 AWG (0.382 mm squared) conductor size
• 316L stainless steel armor for environmental and mechanical protection
• Designed for Velomitor XA (330525) sensor compatibility
• Integrated shield and conductor labeling (White "A", Black "B", Green "SHLD")
• Clear shrink tubing reinforcement

Applications

This interconnect cable is used in critical machinery monitoring applications where the Velomitor XA sensor is deployed. Typical environments include:

• Rotating machinery vibration monitoring (imbalance, misalignment detection)
• Moist or harsh industrial settings requiring NEMA 4X / IP-65 protection
• Power generation and petrochemical facilities
• Applications requiring durable, armored cabling for long-term reliability

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the cable is routed away from high-voltage lines to prevent electromagnetic interference. The cable should be secured to the machine casing using appropriate clamps to prevent strain on the sensor connector. When installing in hazardous areas, ensure that all local and national electrical codes regarding cable routing and conduit usage are strictly followed. Maintain the minimum bend radius of 1.5 inches (38 mm) to avoid damaging the internal conductors.