Siemens 6AV7722-2BA10-0AA0 SIMATIC Panel PC 670

Description

This Siemens 6AV7722-2BA10-0AA0 is a SIMATIC Panel PC 670 standard configuration designed for industrial HMI and control applications. It is equipped with a 12.1-inch color TFT touch display, a Pentium III 1.26 GHz processor, and 256 MB of SDRAM. The unit includes a 40 GB EIDE hard drive and a DVD-ROM drive for storage and data access. This model operates on a 24V DC power supply and is delivered without a pre-installed operating system, allowing for custom software deployment.

Features

• 12.1-inch color TFT display with integrated touch functionality
• Pentium III processor with a clock speed of 1.26 GHz
• 256 MB SDRAM-133 memory module
• 40 GB EIDE Hard Disk Drive (HDD) for local data storage
• Integrated DVD-ROM optical drive
• Requires a 24V DC power source for operation
• Supplied without an operating system

Applications

• Machine-level operator control and monitoring
• Process visualization and data acquisition (SCADA)
• Industrial data logging and reporting
• Factory automation control interfaces
• PC-based control systems

Technical Specifications

Installation Guidelines

1. 1 Verify that the control cabinet or panel cutout dimensions match the Panel PC's required installation dimensions. Ensure adequate clearance for ventilation and cable routing.
2. 2 Insert the Panel PC into the cutout from the front. Secure the unit into the panel using all provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal.
3. 3 Connect a stable, correctly rated 24V DC power supply to the designated power input terminals. Verify correct polarity (+/-) before energizing the circuit. Use appropriate wire gauges for the load.
4. 4 Establish a dedicated, low-impedance connection from the unit's protective earth (PE) or chassis ground terminal to the main system ground bus. This is critical for safety and noise immunity.
5. 5 Connect all required peripheral devices, such as keyboards, mice, and network cables. Ensure all connectors are fully seated and secured. Power on the system and proceed with software installation.