Hersteller: Honeywell
Produkt-Nr.: 51195479-300
Herkunftsland:Vereinigte Staaten
Produkttyp: DCS Connection Cables
Zahlung: T/T, Western Union
Gewicht: 500g
Abmessungen: 320 x 320 x 80 mm
Versandhafen: Xiamen
Garantie: 12 Monate
Engineered for high-integrity industrial control system architectures, the Honeywell 51195479-300 functions as a dual-channel redundant I/O Link connection cable set designed for legacy TDC 3000 and Experion PKS systems. This critical interface assembly provides the physical communication path between Input/Output Processors (IOPs) or I/O Link Modules (IOLIMs) and their respective Field Termination Assemblies (FTAs), ensuring dependable data transmission and fault-tolerant operation in demanding process environments.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Honeywell |
| Model Number | 51195479-300 |
| Interface Type | I/O Link Redundant Bus Interface |
| System Compatibility | TDC 3000, Experion PKS (IOLIM, IOP, FTA) |
| Cable Configuration | Redundant pair (Set of 2 cables) |
| Shielding Type | Overall tinned copper braid with drain wire |
| Country of Origin | United States |
| Shipping Weight (Calculated) | 2.0 kg |
| Package Dimensions (Calculated) | 320 x 320 x 80 mm |
The Honeywell 51195479-300 is length-specific. Using mismatched cable lengths on redundant Link A and Link B paths can introduce slight propagation delays and skew. Always replace both cables in a redundant link simultaneously using a matched set to prevent transient desynchronization faults on the I/O bus.
During system retrofits, ensure the I/O Link cable is routed away from high-voltage AC distribution tracks or variable frequency drive (VFD) output lines. Even with integrated industrial shielding, close proximity to high-energy switching transients can corrupt high-speed communication frames, leading to intermittent module switchovers or loss of view on critical process variables.
Always check the integrity of the chassis ground springs at the entry point of the IOP cabinet. If the braided shield of the 51195479-300 cable set is not properly bonded to the cabinet ground plane, common-mode noise will seek a path through the internal electronics, potentially triggering hardware faults on adjacent analog input channels.
Disconnect control power from the respective IOP or IOLIM modules before executing cable installations or swaps. Inserting or extracting I/O Link cables while the bus is active can cause unintended signal interruptions, bus contention, or safety-related module trip conditions.
Verify that the cabinet power is isolated and trace the existing routing path to ensure sufficient slack remains at bend points.
Align the physical keyway on the multi-pin connector of the 51195479-300 with the matching receptacle on the IOP card or FTA card.
Gently push the connector until it is fully seated, then secure any integrated locking screws or retaining clips to prevent vibration-induced loosening.
Globaler Expressversand
Rückgaben & Garantie
Bestellungen werden Montag bis Freitag bearbeitet und geliefert (außer an Feiertagen).
Für vollständige Anspruchsvoraussetzungen, Wiedereinlagerungsgebühren und internationale Rückgabedetails, sehen Sie bitte unsere offizielle Seite ein Rückerstattungs- & Rückgabebedingungen .
| Country of origin |
Vereinigte Staaten
|
This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...
Dieser Artikel erklärt, wie SPS-Systeme grundlegende mathematische Operationen wie Addition, Subtraktion, Multiplikation, Division, Modulo und Exponentiation in der industriellen Automatisierung...
Der Artikel erklärt mehrere erweiterte Boolesche Logikfunktionen, die in der SPS-Programmierung über die grundlegenden AND-, OR- und NOT-Operationen hinaus verwendet werden. Er behandelt, wie...
Boolesche Logik ist die Grundlage jedes SPS-Programms. Von einfachen Maschinensteuerungen bis hin zu komplexen industriellen Automatisierungssystemen bestimmen Logikgatter, wie Steuerungen auf sich...
Industrielle Firewalls spielen eine entscheidende Rolle in der OT-Cybersicherheit, indem sie SPS-, DCS- und SCADA-Netzwerke durch Segmentierung, Ein- und Ausgangskontrolle sowie IDS/IPS-Integration...
Moderne robotische Greifer entwickeln sich über traditionelle mechanische Greifbacken hinaus. Von gecko-inspirierten Haftsystemen und weichen, lebensmittelechten Greifern bis hin zu KI-gestützten...
