Bently Nevada 330103-08-13-05-02-00 3300 XL Proximity Probe

Description

330103-08-13-05-02-00: 3300 XL 8 mm proximity probe features an M10 x 1 metric thread, an unthreaded length of 80 mm (Option 08), and an overall case length of 130 mm (Option 13) without mechanical armor.

This configuration has a short 0.5-meter (1.6 feet) total length (Option 05) designed for close coupling, terminated with a standard miniature coaxial ClickLoc connector (Option 02). Because it utilizes the Option 00 agency approval selection, it is intended for use in environments where hazardous area certifications are not required, differentiating it from Option 05 variants that carry CSA, ATEX, and IECEx approvals.

Features

• M10 x 1 threaded body (330103 base configuration) without protective armor.
• Option 08 unthreaded case length specifying 80 mm of unthreaded probe body.
• Option 13 overall case length specifying a 130 mm rigid threaded case length.
• Option 05 total cable length specifying a 0.5-meter (1.6 feet) integrated coaxial lead.
• Option 02 miniature coaxial ClickLoc connector provides standard cable termination without connector protectors.
• Option 00 agency approval designates this unit is for general industrial environments where explosive atmosphere certification is not required.
• 8.0 mm probe tip diameter offering a nominal DC resistance of 7.45 ohms +/- 0.50 ohms for the 0.5 m length.
• PPS (polyphenylene sulfide) molded tip material providing robust encapsulation of the probe coil.

Applications

Typically used on fluid-film bearing machines, rotating machinery shaft vibration and position monitoring, axial position and radial vibration measurements, Keyphasor reference, and rotational speed measurements in power generation, water treatment, petrochemical, and general heavy industries.

Ordering Information

Technical Specifications

Installation Guidelines

• Maintain proper side-view clearance around the probe tip to prevent false gapping and target-sensing interference.
• Secure the threaded body using a standard thread engagement limit up to 15 mm maximum for M10x1 threads to avoid binding.
• Ensure the probe is properly gapped using a voltmeter at the Proximitor sensor output (typically -9.0 Vdc to -11.0 Vdc, equivalent to approximately 1.27 mm or 50 mils gap).
• Protect the ClickLoc coaxial connector from moisture, dust, and turbine oil; do not route the probe cable where it is subject to severe abrasion or pinching.