Honeywell FC-TPSU-2430 Safety Manager Power Supply Module

Only 3 item(s) left in stock

Manufacturer: Honeywell
Product No.: FC-TPSU-2430
Country of origin:Egyesült Államok
Product Type: Safety PLC Modules
Payment: T/T, Western Union
Weight: 3000g
Dimensions: 31.0 cm x 15.0 cm x 8.0 cm (12.2 in x 5.9 in x 3.1 in)
Shipping port: Xiamen
Warranty: 12 months

Description

Designed to deliver regulated DC power within critical control architectures, the Honeywell FC-TPSU-2430 serves as a high-reliability power supply module for Safety Manager systems. This safety-instrumented module supplies stabilized 24 Vdc power to chassis backplanes, input/output channels, and field-side devices. Operating within safety-instrumented systems (SIS) up to SIL3 compliance, the module provides integrated overvoltage protection, thermal monitoring, and active current limiting to safeguard connected safety loop circuits.

Key Features

High-efficiency 24 Vdc regulation optimized for Safety Manager system backplanes.
Integrated diagnostic monitoring for under-voltage, over-temperature, and current overload conditions.
Robust diagnostic feedback integrated directly into Safety Manager system software for real-time status reporting.
Hot-swappable physical form factor supporting continuous uptime during module servicing or replacement.

Applications

Emergency Shutdown (ESD) systems in petrochemical, refining, and gas processing operations.
Fire and Gas (F&G) system loop power distribution networks.
Burner Management Systems (BMS) in industrial boiler plants and high-temperature furnaces.
Critical control loop isolation and power supply in SIL3 rated processes.

Technical Specifications

Parameter	Specification Value
Manufacturer	Honeywell
Model Code	FC-TPSU-2430 (FCTPSU2430)
System Compatibility	Honeywell Safety Manager / Safety Manager SC
Output Voltage (Nominal)	24 Vdc
Output Current Rating	30 A
Safety Integrity Level	Capable of SIL3 configurations
Operating Temperature Range	0 to 60 Celsius (non-condensing)
Storage Temperature Range	-40 to 85 Celsius
Shipping Weight (Calculated)	3.00 kg (6.61 lbs)
Package Dimensions (Calculated)	31.0 cm x 15.0 cm x 8.0 cm (12.2 in x 5.9 in x 3.1 in)

Empirical Engineering Insights

Alternative Models & Compatibility

The FC-TPSU-2430 is built specifically to integrate with standard Honeywell Safety Manager backplane chassis. When replacing legacy power systems, ensure that local controller firmware is updated to register the active power monitoring telemetry sent by the newer TPSU power modules.

Application Pitfalls & Engineering Notes

In dual-redundant safety setups, verify that the load balancing factor remains under 45 percent per module. If one power source fails, the remaining module must instantly absorb the secondary load without triggering thermal trip thresholds inside compact, unventilated enclosures.

Commissioning & Wiring Tips

Before inserting the module into a live Safety Manager rack, verify backplane guide pins are aligned perfectly to prevent transient arcing. Ensure heavy-gauge grounding straps are terminated correctly at the chassis grounding point to isolate common-mode noise.

Installation Guidelines

CRITICAL WARNING

Do not install or remove this module in hazardous locations while circuits are live unless the area has been thoroughly verified as non-hazardous. Ensure complete isolation of input AC or primary DC feeds prior to physical terminal handling to prevent arc flash or permanent module component degradation.

Isolate primary utility or bus power feeding the safety cabinet.

Align the module backplane connections carefully with the designated rack guide rails.

Slide the module smoothly into place until the faceplate connector is locked firmly, and secure the mounting screws to torque specifications.

Apply input power and monitor the front-panel status LEDs to ensure proper diagnostic validation.

Key Features:

Is the FC-TPSU-2430 power module hot-swappable?

Yes, the module supports hot-swapping in redundant Safety Manager rack configurations, allowing replacement without interrupting active safety loop functions.

What parameters does the module actively monitor?

It monitors backplane power output status, internal heat levels, and current consumption, reporting fault diagnostics directly to the controller firmware.

Can this module be used in SIL3 safety loops?

Yes, it is fully certified for deployment within safety-instrumented systems up to SIL3 when integrated as part of the Safety Manager architecture.

Globális expressz szállítás

Normál szállítás: 4-6 munkanap a DHL, FedEx és UPS szolgáltatásával.
Gyors kiszállítás: A raktáron lévő, 14:00 (GMT+8) előtt leadott megrendeléseket aznap feladjuk.
Világszintű lefedettség: Több mint 150 országban szolgálunk ki, beleértve a gyors szállítást Szaúd-Arábiába és az Egyesült Arab Emírségekbe.

Visszaküldés és garancia

30 napos garancia: Csak a raktáron lévő termékek eredeti, gyári zárt csomagolásban történő visszaküldését fogadjuk el.
12 hónapos garancia: Minden ipari alkatrészünket szakmai műszaki garancia védi.

A megrendeléseket hétfőtől péntekig dolgozzuk fel és szállítjuk (állami ünnepnapok kivételével).

A teljes jogosultság, a készletfeltöltési díjak és a nemzetközi visszaküldési részletek megtekintéséhez kérjük, tekintse meg hivatalos oldalunkat Visszatérítési és Visszaküldési Szabályzat .

TECHNICAL SPECIFICATIONS

Country of origin

Nemrég megtekintett termékek

Műszaki ismeretek

Electric Actuators Designed to Replace Fluids: Hands-on Tutorial

Elektromos működtetők, amelyek a folyadékenergia-rendszereket váltják ki: Gyakorlati ipari automatizálási útmutató

Ez a cikk bemutatja, hogyan alakítják át az integrált elektromos működtetők, például az SMC e-Actuator sorozata, az ipari mozgásvezérlést azáltal, hogy kiváltják a hagyományos pneumatikus és...

2026. június 23.

$Math Operations Using OpenPLC for Industrial Automation Applications$

Honeywell FC-TPSU-2430 Safety Manager Power Supply Module