Siemens 6AV7612-0AF30-0BF0 SIMATIC Panel PC 670 Panel PC

Description

The Siemens 6AV7612-0AF30-0BF0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. This unit features a 12-inch TFT touch display and is powered by a Celeron 300 MHz CPU with 256 MB of RAM. For data storage and software installation, it is equipped with a 40 GB hard drive and a CD-ROM drive. The system is configured to operate on a 115-230V AC power supply and comes pre-installed with the Windows 98 operating system in English. This model is part of the established SIMATIC Panel PC family, providing a robust platform for plant-floor visualization and data handling.

Features

• 12-inch TFT color display with integrated touch screen
• Intel Celeron processor operating at 300 MHz
• 256 MB of installed system RAM
• 40 GB hard disk drive for application and data storage
• Integrated CD-ROM drive
• Wide input voltage range of 115-230V AC
• Pre-loaded with Windows 98 (English version)

Applications

• Machine-level HMI and visualization
• Process control and monitoring
• Data acquisition and logging
• Factory automation control panels
• Legacy system integration and upgrades

Technical Specifications

Installation Guidelines

1. 1 Prepare the panel cutout according to the device's mechanical drawings. Ensure the mounting surface is clean, flat, and can support the weight of the unit (4.00 kg).
2. 2 Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal.
3. 3 Connect the protective earth (PE) conductor to the designated grounding terminal on the chassis. A low-impedance ground connection is critical for safety and noise immunity.
4. 4 Connect the 115-230V AC mains supply using the provided U.S. mains cable to a properly rated and protected power source. Ensure the source voltage matches the device's input range.
5. 5 Connect all required communication and I/O cables. Route cables to prevent strain and interference. Use shielded cables for communication lines where specified.